Lipid Nanoparticle Delivery Alters the Adjuvanticity of the TLR9 Agonist CpG by Innate Immune Activation in Lymphoid Tissue.

Pharmacological strategies to activate innate immune cells are of great relevance in the context of vaccine design and anticancer immune therapy, to mount broad immune responses able to clear infection and malignant cells. Synthetic CpG oligodeoxynucleotides (CpG-ODNs) are short single-stranded DNA molecules containing unmethylated CpG dinucleotides and a phosphorothioate backbone. Class B CpG ODNs activate robust innate immune responses through a TLR9-dependent NF-κB signaling pathway. This feature is attractive to exploit in the context of vaccine design and cancer immunotherapy. Soluble CpG-ODNs cause hepatic toxicity, which reduces its therapeutic applicability. The formulation of class B CpG ODN1826 in lipid nanoparticles (LNPs) containing an ionizable cationic lipid that complexes CpG through electrostatic interaction is reported. Upon local administration, LNP-formulated CpG drains to lymph nodes and triggers robust innate immune activation. Unformulated, soluble, CpG, by contrast, is unable to induce robust innate activation in draining lymph nodes and is distributed systemically. In a vaccination setting, LNP-formulated CpG, admixed with a protein antigen, induces higher antigen-specific antibody titers and T cell responses than antigen admixed with unformulated soluble CpG.

Successful batch and continuous lyophilization of mRNA LNP formulations depend on cryoprotectants and ionizable lipids.

The limited thermostability and need for ultracold storage conditions are the major drawbacks of the currently used nucleoside-modified lipid nanoparticle (LNP)-formulated messenger RNA (mRNA) vaccines, which hamper the distribution of these vaccines in low-resource regions. The LNP core contains, besides mRNA and lipids, a large fraction of water. Therefore, encapsulated mRNA, or at least a part of it, is subjected to hydrolysis mechanisms similar to unformulated mRNA in an aqueous solution. It is likely that the hydrolysis of mRNA and colloidal destabilization are critical factors that decrease the biological activity of mRNA LNPs upon storage under ambient conditions. Hence, lyophilization as a drying technique is a logical and appealing method to improve the thermostability of these vaccines. In this study, we demonstrate that mRNA LNP formulations comprising a reduction-sensitive ionizable lipid can be successfully lyophilized, in the presence of 20% w/v sucrose, both by conventional batch freeze-drying and by an innovative continuous spin lyophilization process. While the chemical structure of the ionizable lipid did not affect the colloidal stability of the LNP after lyophilization and redispersion in an aqueous medium, we found that the ability of LNPs to retain the mRNA payload stably encapsulated, and mediate in vivo and in vitro mRNA translation into protein, post lyophilization strongly depended on the ionizable lipid in the LNP formulation.

Human Antimicrobial Peptide Triggered Colloidal Transformations in Bacteria Membrane Lipopolysaccharides.

Growing concerns of bacterial resistance against conventional antibiotics shifts the research focus toward antimicrobial peptide (AMP)-based materials. Most AMPs kill gram-negative bacteria by destroying their inner membrane, but have to first pass the outer membrane covered with lipopolysaccharides (LPS). Their interplay with the LPS is crucial for bactericidal activity, but is yet to be elucidated in detail. In this study, self-assemblies of Escherichia coli LPS with the human cathelicidin AMP LL-37, free and encapsulated into glyceryl monooleate (GMO) lipid nanoparticles, are analyzed using synchrotron small angle X-ray scattering, dynamic light scattering, and cryogenic transmission electron microscopy. Circular dichroism spectroscopy is used to study modifications in LL-37's secondary structure. LPS is found to form elongated micelles and the addition of LL-37 induces their transformation to multilamellar structures. LPS' addition to GMO cubosomes triggers the swelling of the internal cubic structure, while in multilamellar GMO/LL-37 nanocarriers it causes transitions into unstructured particles. The insights on the interactions among LPS and LL-37, in its free form or encapsulated in GMO dispersions, may guide the design of LPS-responsive antimicrobial nanocarriers. The findings may further assist the formulation of antimicrobial nanomaterials with enhanced penetration of LPS layers for improved destruction of bacterial membranes.

pH-responsive aminolipid nanocarriers for antimicrobial peptide delivery.

HYPOTHESIS: pH-responsive aminolipid self-assemblies are promising platforms for the targeted delivery of antimicrobial peptides (AMPs), with the potential to improve their therapeutic efficiency and physico-chemical stability. EXPERIMENTS: pH-sensitive nanocarriers based on dispersed self-assemblies of 1,2-dioleoyl-3-dimethylammonium-propane (DODAP) with the human cathelicidin LL-37 in excess water were characterized at different pH values using small-angle X-ray scattering, cryogenic transmission electron microscopy, and dynamic light scattering. Fluorescence and electrophoretic mobility measurements were used to probe the encapsulation efficiency of LL-37 and the nanocarriers' surface potential. FINDINGS: Upon decreasing pH in the DODAP/water systems, normal oil-in-water emulsions at pH ≥ 5.0 transitioned to emulsions encapsulating inverse hexagonal and cubic structures at pH between 4.5 and 4.0, and mostly positively-charged vesicles at pH < 4.0. These colloidal transformations are driven by the protonation of DODAP upon pH decrease. The larger lipid-water interfacial area provided by the DODAP self-assemblies at pH ≤ 4.5 allowed for an adequate encapsulation efficiency of LL-37, favouring the formation of vesicles in a concentration-dependent manner. Contrary, LL-37 was found to dissociate from the emulsion droplets at pH 6.0. The knowledge on the pH-triggered self-assembly of LL-37 and DODAP, combined with the results on peptide release from the structures contribute to the fundamental understanding of lipid/peptide self-assembly. The results can guide the rational design of future pH-responsive AMP delivery systems.

Dispersed liquid crystals as pH-adjustable antimicrobial peptide nanocarriers.

HYPOTHESIS: pH-responsive nanocarriers have the potential to provide targeted delivery of antimicrobial peptides (AMPs) to sites of bacterial infection with typically abnormal pH levels in the body. However, the local pH of the infected sites varies substantially among different infection-related diseases, calling for the development of delivery systems capable of targeting local pathological conditions in an adjustable pH range. EXPERIMENTS: In this study, a highly versatile pH-responsive nanocarrier platform, based on dispersions of oleic acid (OA) and glycerol monooleate (GMO) self-assemblies with the human cathelicidin AMP LL-37, was designed and characterized. FINDINGS: A detailed pH-composition phase diagram was constructed from small angle X-ray scattering and cryogenic transmission electron microscopy data. In addition, the protonation state and apparent pKa of OA embedded in these nano-self-assemblies were investigated by electrophoretic mobility measurements at different pHs and found to be strongly dependent on nanocarrier composition. By varying composition of these nanocarriers, the apparent pKa of embedded OA molecules could be tuned from 7.8 to 6.3, shifting the range of nanocarriers' pH-response. The study advances our fundamental understanding of self-assembly and pH-responsiveness in lipid-peptide systems containing monounsaturated long-chain fatty acids. The results may guide the future design of highly adaptable nanocarriers for patient-optimized pH-targeted AMP delivery.

Nanostructure generation during milk digestion in presence of a cell culture model simulating the small intestine.

HYPOTHESIS: The development of advanced oral delivery systems for bioactive compounds requires the fundamental understanding of the digestion process within the gastrointestinal tract. Towards this goal, dynamic invitro digestion models, capable of characterising the molecular as well as colloidal aspects of food, together with their biological interactions with relevant invitro cell culture models, are essential. EXPERIMENTS: In this study, we demonstrate a novel digestion model that combines flow-through time resolved small angle X-ray scattering (SAXS) with an invitro Caco-2/HT-29 cell co-culture model that also contained a mucus layer. This set-up allows the dynamic insitu characterisation of colloidal structures and their transport across a viable intestinal cell layer during simulated digestion. FINDINGS: An integrated online SAXS - invitro cell co-culture model was developed and applied to study the digestion of nature's own emulsion, milk. The impact of the invitro cell culture on the digestion-triggered formation and evolution of highly ordered nanostructures in milk is demonstrated. Reported is also the crucial role of the mucus layer on top of the cell layer, protecting the cells from degradation by digestive juice components such as lipase. The novel model can open unique possibilities for the dynamic investigation of colloidal structure formation during lipid digestion and their effect on the uptake of bioactive molecules by the cells.

Internal Lamellar and Inverse Hexagonal Liquid Crystalline Phases During the Digestion of Krill and Astaxanthin Oil-in-Water Emulsions.

Krill oil represents an important alternative natural source of omega-3 (ω-3) polyunsaturated fatty acids (PUFAs). Considering the beneficial health effects of these essential fatty acids, particularly in various disorders including cancer, cardiovascular, and inflammation diseases, it is of paramount importance to gain insight into the digestibility of krill oil. In this work, we study the fate of krill oil-in-water emulsion, stabilized by sodium caseinate, during lipolysis by coupling time-resolved synchrotron small-angle X-ray scattering (SAXS) to flow-through lipolysis model. For gaining further insight into the effect of ω-3 PUFA-containing oil type on the dynamic structural features occurring during lipolysis, two additional astaxanthin oil-in-water emulsions, stabilized using either sodium caseinate or citrem, were subjected to lipolysis under identical experimental conditions. In addition to the difference in lipid composition in both oils, ω-3 PUFAs in astaxanthin oil, similar to fish oil, exist in the form of triacylglycerols; whereas most of those in krill oil are bound to phospholipids. SAXS showed the formation of highly ordered nanostructures on exposure of these food emulsions to the lipolysis medium: the detection of a biphasic feature of coexisting inverse hexagonal (H2) and lamellar (Lα) liquid crystalline phases in the digested krill oil droplets' interiors, as compared to a neat Lα phase in the digested astaxanthin oil droplets. We discuss the dynamic phase behavior and describe the suggested important role of these phases in facilitating the delivery of nutrients throughout the body. In addition, the potential implication in the development of food and drug nanocarriers is briefly described.

pH-Responsive Nano-Self-Assemblies of the Anticancer Drug 2-Hydroxyoleic Acid.

pH-responsive lipid nanocarriers have the potential to selectively target the acidic extracellular pH environment of cancer tissues and may further improve the efficacy of chemotherapeutics by minimizing their toxic side-effects. Here, we present the design and characterization of pH-sensitive nano-self-assemblies of the poorly water-soluble anticancer drug 2-hydroxyoleic acid (2OHOA) with glycerol monooleate (GMO). pH-triggered nanostructural transformations from 2OHOA/GMO nanoparticles with an internal inverse hexagonal structure (hexosomes) at pH around 2.0-3.0, via nanocarriers with an internal inverse bicontinuous cubic structure (cubosomes) at pH 2.0-4.5, to vesicles at pH 4.5-7.4 were observed with synchrotron small-angle X-ray scattering, and cryogenic transmission electron microscopy. ζ-potential measurements highlight that the pH-driven deprotonation of the carboxylic group of 2OHOA, and the resulting charge-repulsions at the lipid-water interface account for these nanostructural alterations. The study provides detailed insight into the pH-dependent self-assembly of 2OHOA with GMO in excess buffer at physiologically relevant pH values, and discusses the effects of pH alterations on modulating their nanostructure. The results may guide the further development of pH-responsive anticancer nanocarriers for the targeted delivery of chemotherapeutics to the local microenvironment of tumor cells.

From Structure to Function: pH-Switchable Antimicrobial Nano-Self-Assemblies.

Stimuli-responsive nanocarriers based on lipid self-assemblies have the potential to provide targeted delivery of antimicrobial peptides, limiting their side effects while protecting them from degradation in the biological environments. In the present study, we design and characterize a simple pH-responsive antimicrobial nanomaterial, formed through the self-assembly of oleic acid (OA) with the human cathelicidin LL-37 as a model for an amphiphilic antimicrobial peptide. Colloidal transformations from core-shell cylindrical micelles with a cross-sectional diameter of ∼5.5 nm and a length of ∼23 nm at pH 7.0 to aggregates of branched threadlike micelles at pH 5.0 were detected using synchrotron small-angle X-ray scattering, cryogenic transmission electron microscopy, and dynamic light scattering. Biological in vitro assays using an Escherichia coli bacteria strain showed high antimicrobial activity of the positively charged LL-37/OA aggregates at pH 5.0, which was not caused by the pH conditions themselves. Contrary to that, negligible antimicrobial activity was observed at pH 7.0 for the negatively charged cylindrical micelles. The nanocarrier's ability to switch its biological activity "on" and "off" in response to changes in pH could be used to focus the antimicrobial peptides' action to areas of specific pH in the body. The presented findings contribute to the fundamental understanding of lipid-peptide self-assembly and may open up a promising strategy for designing simple pH-responsive delivery systems for antimicrobial peptides.

pH-Triggered nanostructural transformations in antimicrobial peptide/oleic acid self-assemblies.

The delivery of poorly water-soluble antimicrobial peptides (AMPs) that are sensitive to degradation is a major challenge in the pharmaceutical field. In this study, we design and characterize a pH-sensitive nanocarrier with the potential for delivery of AMPs and their protection from degradation. These nanobiointerfaces are prepared through the self-assembly of oleic acid (OA) with the human cathelicidin LL-37 in excess water. Advanced experimental methods including synchrotron small angle X-ray scattering, cryogenic transmission electron microscopy, and dynamic light scattering were used to characterize the OA/LL-37 self-assemblies and their structural alterations in response to changes in pH and composition. Experimental findings reveal colloidal transformations from normal emulsions via micellar cubosomes and hexosomes to vesicles upon increasing the pH from 6.0 to 8.0 at a LL-37 content around 10 wt% relative to OA. Increasing the LL-37 content to 30 wt% in OA led to diminishing of micellar cubosomes and hexosomes in this narrow pH range, favoring the formation of micelles and vesicles of various shapes and sizes. Upon increasing the pH, with the strongest effect around pH 7.5, charge repulsions among the gradually deprotonating carboxylic groups of OA modified the geometric packing of the molecules, significantly affecting the nanostructure. These detailed insights into the formation of this unique family of nanobiointerfaces and their tunable structural features may contribute to the rational design of pH-responsive antimicrobial systems for the delivery of peptides, particularly poorly water-soluble AMPs.

Microfluidic Platform for the Continuous Production and Characterization of Multilamellar Vesicles: A Synchrotron Small-Angle X-ray Scattering (SAXS) Study.

A microfluidic platform combined with synchrotron small-angle X-ray scattering (SAXS) was used for monitoring the continuous production of multilamellar vesicles (MLVs). Their production was fast and started to evolve within less than 0.43 s of contact between the lipids and the aqueous phase. To obtain nanoparticles with a narrow size distribution, it was important to use a modified hydrodynamic flow focusing (HFF) microfluidic device with narrower microchannels than those normally used for SAXS experiments. Monodispersed MLVs as small as 160 nm in size, with a polydispersity index (PDI) of approximately 0.15 were achieved. The nanoparticles produced were smaller and had a narrower size distribution than those obtained via conventional bulk mixing methods. This microfluidic platform therefore has a great potential for the continuous production of monodispersed NPs.

Antimicrobial Peptide-Driven Colloidal Transformations in Liquid-Crystalline Nanocarriers.

Designing efficient colloidal systems for the delivery of membrane active antimicrobial peptides requires in-depth understanding of their structural and morphological characteristics. Using dispersions of inverted type bicontinuous cubic phase (cubosomes), we examine the effect of integrating the amphiphilic peptide LL-37 at different concentrations on the self-assembled structure and evaluate its bactericidal ability against Escherichia coli. Small-angle X-ray scattering, dynamic light scattering, and cryogenic transmission electron microscopy show that LL-37 integrates into the bicontinuous cubic structure, inducing colloidal transformations to sponge and lamellar phases and micelles in a concentration-dependent manner. These investigations, together with in vitro evaluation studies using a clinically relevant bacterial strain, established the composition-nanostructure-activity relationship that can guide the design of new nanocarriers for antimicrobial peptides and may provide essential knowledge on the mechanisms underlying the bacterial membrane disruption with peptide-loaded nanostructures.

A pyranose dehydrogenase-based biosensor for kinetic analysis of enzymatic hydrolysis of cellulose by cellulases.

A novel electrochemical enzyme biosensor was developed for real-time detection of cellulase activity when acting on their natural insoluble substrate, cellulose. The enzyme biosensor was constructed with pyranose dehydrongease (PDH) from Agaricus meleagris that was immobilized on the surface of a carbon paste electrode, which contained the mediator 2,6-dichlorophenolindophenol (DCIP). An oxidation current of the reduced form of DCIP, DCIPH2, produced by the PDH-catalyzed reaction with either glucose or cellobiose, was recorded under constant-potential amperometry at +0.25V (vs. Ag/AgCl). The PDH-biosensor was shown to be anomer unspecific and it can therefore be used in kinetic studies over broad time-scales of both retaining- and inverting cellulases (in addition to enzyme cocktails). The biosensor was used for real-time measurements of the activity of the inverting cellobiohydrolase Cel6A from Hypocrea jecorina (HjCel6A) on cellulosic substrates with different morphology (bacterial microcrystalline cellulose (BMCC) and Avicel). The steady-state rate of hydrolysis increased towards a saturation plateau with increasing loads of substrate. The experimental results were rationalized using a steady-state rate equation for processive cellulases, and it was found that the turnover for HjCel6A at saturating substrate concentration (i.e. maximal apparent specific activity) was similar (0.39-0.40s(-1)) for the two substrates. Conversely, the substrate load at half-saturation was much lower for BMCC compared to Avicel. Biosensors covered with a polycarbonate membrane showed high operational stability of several weeks with daily use.