Ultrathin Feldspathic Ceramic Veneers: A Pilot SEM Evaluation of Etched Intaglio Surfaces.

Ultrathin ceramic veneers are a viable therapeutic option to manage esthetic challenges in the anterior zone. Proper conditioning of the intaglio surface of porcelain veneers is essential to achieve an adequate bonding. In clinical practice, this is typically done with chemical etching using an acid-containing agent, such as hydrofluoric acid. While it is well established that the etching effect is dependent on etching time and the acid concentration, little is known about the impact of etching time and the veneer fabrication method. The purpose of this pilot study was to evaluate, using scanning electron microscopy (SEM), the effect that different etching-time protocols have on the intaglio surface characteristics of ultrathin ceramic veneers fabricated with either the platinum foil technique or the refractory die technique. Several replicas of an ultrathin feldspathic ceramic veneer for a maxillary central incisor were fabricated. Individual specimens were processed according to different intaglio surface-etching protocols: no etching, etching for 90 seconds, etching for 120 seconds, and etching for 150 seconds (9.6% hydrofluoric acid used for all etching groups). It was observed that the 120-second etching protocol resulted in a favorable microroughness surface pattern in the platinum foil group. This pattern was comparable to that obtained by etching for 90 seconds with hydrofluoric acid the intaglio surface of veneers fabricated with the refractory die technique. Increasing the etching time to 150 seconds did not result in a more favorable roughness pattern.

Interproximal Soft Tissue Height Changes After Unassisted Socket Healing versus Alveolar Ridge Preservation Therapy.

The primary aim of this study was to evaluate the efficacy of alveolar ridge preservation (ARP) therapy compared with unassisted socket healing (USH) in attenuating interproximal soft tissue atrophy. Adult subjects that underwent maxillary single-tooth extraction with or without ARP therapy were included in this study. Surface scans and cone beam computed tomography were obtained to digitally assess interproximal soft tissue height changes and measure facial bone thickness (FBT), respectively. Logistic regression models were conducted to investigate the individual effect of demographic and clinical variables. Ninety-six subjects (USH=49; ARP=47) constituted the study population. Linear soft tissue assessments revealed a significant reduction of the interproximal soft tissue over time within and between groups (P<.0001). ARP therapy significantly attenuated interproximal soft tissue height reduction compared to USH (USH mesial: -2.0±0.9mm vs. ARP mesial: -1.0±0.5mm / USH distal -1.9±0.7mm vs. ARP distal: -1.1±0.5mm; P<.0001). Thin FBT (≤1mm) upon extraction was associated with greater interproximal soft tissue atrophy compared with thick FBT (>1mm), independently of the treatment received (P<.0001). Nevertheless, ARP therapy resulted in better preservation of interproximal soft tissue height especially in thin bone phenotype by a factor of 2 for the mesial site (+1.3mm) and a factor of 1.6 (+0.9mm) for the distal site. This study demonstrated that ARP therapy largely attenuates interproximal soft tissue dimensional reduction after maxillary single-tooth extraction compared with USH.

Relationship between supracrestal soft tissue dimensions and other periodontal phenotypic features: A cross-sectional study.

BACKGROUND: The purpose of this study was to determine the association between periodontal supracrestal soft tissue dimensions (PSSTDs) and other phenotypic features in non-molar maxillary teeth. MATERIALS AND METHODS: Adult subjects in need of comprehensive dental treatment were recruited. Periodontal phenotypic variables (i.e., facial and palatal gingival thickness [GT], alveolar bone thickness [BT], and PSSTDs, namely distance from the gingival margin to the bone crest defined as periodontal supracrestal tissue height [PSTH] and distance from the cementoenamel junction to the bone crest [CEJ-BC]) were recorded using cone-beam computed tomography scans. Standardized intraoral photographs were obtained to assess facial keratinized tissue width (KTW) and other anatomical parameters (i.e., tooth type, gingival architecture, and interproximal papilla height). RESULTS: The study sample was constituted of 87 participants that contributed with a total of 522 maxillary anterior teeth. Differences in mean values of PSSTDs, KTW, GT, and BT were observed between tooth types and sex. Males exhibited a thicker GT and BT, and taller PSTH and KTW compared to females. Shorter CEJ-BC was associated with shorter PSTH, wider KTW, and thicker GT and BT. Shorter PSTH was associated with thicker facial BT. Notably, BT and GT were positively correlated at both facial and palatal sites, meaning that the thicker the gingival phenotype, the thicker the bone morphotype. Facial BT and facial GT were positively correlated with KTW. A flat gingival architecture was associated with the thick periodontal phenotype. Square teeth had shorter CEJ-BC, wider KTW, and thicker GT. CONCLUSIONS: Periodontal phenotypic features vary across and within subjects, between facial and palatal sites at different apico-coronal levels, and as a function of sex and tooth type. The shorter the PSSTDs, the wider the KTW and the thicker the GT and BT. PSSTDs, particularly PSTH, should be considered an integral component of the periodontal phenotype.

Impact of peri-implant soft tissue characteristics on health and esthetics.

OBJECTIVE: To review the impact of key peri-implant soft tissue characteristics on health and esthetics. MAIN CONSIDERATIONS: The keratinized mucosa width (KMW), the mucosal thickness (MT), and the supracrestal tissue height (STH) are essential components of the peri-implant soft tissue phenotype. An inadequate KMW (<2 mm) has been associated with local discomfort upon oral hygiene performance and increased risk for the onset of peri-implant diseases. A minimum buccal MT (≥2 mm) is generally required to prevent esthetic issues related to the effect of transmucosal prosthetic elements on the color of the mucosa and can also contribute to long-term mucosal stability. STH is directly related to marginal bone remodeling patterns during the early healing process that follows the connection of transmucosal prosthetic components. Short STH, generally defined as <3 mm, has been consistently associated with marginal bone loss resulting from the physiologic establishment of the mucosal seal. Insufficient STH may also derive into the fabrication of unfavorable transmucosal prosthetic contours, which frequently results in unpleasing esthetic outcomes and predisposes to submarginal biofilm accumulation. Peri-implant soft tissue dehiscences (PISTDs) are a type of peri-implant deformity that are associated with esthetic issues and often occur in sites presenting KMW, MT, and/or STH deficiencies. PISTDs should be correctly diagnosed and treated accordingly, usually by means of multidisciplinary therapy. CONCLUSION: Understanding the impact of different dimensional and morphologic features of the peri-implant mucosa on health and esthetic outcomes is fundamental to make appropriate clinical decisions in the context of tooth replacement therapy with implant-supported prostheses.

Effect of periodontal phenotype characteristics on post-extraction dimensional changes of the alveolar ridge: A prospective case series.

AIM: This study was primarily aimed at assessing the effect that specific periodontal phenotypical characteristics have on alveolar ridge remodelling after tooth extraction. MATERIALS AND METHODS: Patients in need of extraction of a non-molar maxillary tooth were enrolled. Baseline phenotypical characteristics (i.e., mid-facial and mid-palatal soft tissue and bone thickness, and supracrestal soft tissue height [STH]) were recorded upon extraction. A set of clinical, digital imaging (linear and volumetric), and patient-reported outcomes were assessed over a 14-week healing period. RESULTS: A total of 78 subjects were screened. Forty-two subjects completed the study. Linear and volumetric bone changes, as well as vertical linear soft tissue and alveolar ridge volume (soft tissue contour) variations, were indicative of a marked dimensional reduction of the alveolar ridge over time. Horizontal facial and palatal soft tissue thickness gain was observed. Thin facial bone (≤1 mm) upon extraction, compared with thick facial bone (>1 mm), was associated with greater linear horizontal (-4.57 ± 2.31 mm vs. -2.17 ± 1.65 mm, p = .003) and vertical mid-facial (-0.95 ± 0.67 mm vs. -4.08 ± 3.52 mm, p < 0.001) and mid-palatal (-2.03 ± 2.08 mm vs. -1.12 ± 0.99 mm, p = 0.027) bone loss, as well as greater total (-34% ± 10% vs. 15% ± 6%, p < 0.001), facial (-51% ± 19% vs. 28% ± 18%, p = 0.040), and palatal bone volume reduction (-26% ± 14% vs. -8% ± 10%, p < 0.001). Aside from alveolar bone thickness, STH was also found to be a predictor of alveolar ridge resorption since this variable was directly correlated with bone volume reduction. Patient-reported discomfort scores progressively decreased over time, and the mean satisfaction upon study completion was 94.5 ± 0.83 out of 100. CONCLUSIONS: Alveolar ridge remodelling is a physiological phenomenon that occurs after tooth extraction. Post-extraction alveolar ridge atrophy is more marked on the facio-coronal aspect. These dimensional changes are more pronounced in sites exhibiting a thin facial bone phenotype (Clinicaltrials.gov NCT02668289).

Comparative histological evaluation of intra- and extraorally de-epithelialized connective tissue graft samples harvested from the posterior palate region.

BACKGROUND: Autologous connective tissue graft (CTG) is generally considered the gold standard for peri-implant soft tissue phenotype modification and root coverage therapy. The presence of epithelial remnants in CTG has been associated with complications after soft tissue augmentation surgery. However, a specific method for de-epithelization that is patently superior has not been identified yet. This study aimed to evaluate the effectiveness of two different approaches to de-epithelialize CTG samples harvested from the posterior palate. METHODS: Patients in need of periodontal or implant-related surgery that required harvesting a CTG from the posterior palate region were recruited. CTG samples harvested with an indirect approach were de-epithelialized using either an intraoral (IO group) or an extraoral (EO group) method. Tissue specimens were subsequently processed for histological analysis. The presence or absence of oral epithelial remnants was determined by two examiners using light microscopy. RESULTS: Twenty-four patients, who provided a total of 46 analyzable CTG samples, were enrolled in this study. Histological assessment revealed that 19 out of 22 samples in the IO group were free of epithelial remnants. In the EO group, 20 out of 24 samples did not exhibit epithelial residues. These results translate into 86.4% and 83.3% of epithelium-free samples in the IO and EO groups, respectively. CONCLUSIONS: Although the intraoral method may provide several practical advantages compared with the extraoral technique, both approaches for de-epithelialization of CTG samples harvested from the posterior palate region tested in this study were comparably effective. However, none of these methods ensured complete removal of the oral epithelium in a predictable manner, which should be considered in clinical practice.

Evaluation of a Minimally Invasive Alveolar Ridge Reconstruction Approach in Postextraction Dehiscence Defects: A Case Series.

This study evaluated a panel of clinical, dimensional, volumetric, implant-related, histomorphometric, and patient-reported outcome measures (PROMs) following reconstruction of dehiscence defects in extraction sockets with a minimally invasive technique using particulate bone allograft and a nonresorbable dense polytetrafluoroethylene (dPTFE) membrane. Subjects (n = 17) presenting severe buccal dehiscence defects at the time of single-rooted tooth extraction participated in the study. The mean vertical dimension of the dehiscence defects at baseline was 5.76 ± 4.23 mm. Subjects were followed up at 1, 2, 5, and 20 weeks postoperatively. The dPTFE barrier was gently removed at 5 weeks. CBCT and intraoral scans were obtained at baseline and at 20 weeks. A bone core biopsy sample was harvested at 24 weeks (before implant placement). Linear radiographic measurements revealed a mean increase in buccal bone height from baseline to 20 weeks (5.66 ± 5.1 mm; P < .0001). A total alveolar bone volume gain of 9.12% was observed. Although approximately half of the sites required some degree of additional bone augmentation at the time of implant placement, all implants were placed in a favorable restorative position with adequate primary stability. Histomorphometric analyses revealed a mean mineralized tissue area of 31.04% ± 15.22%, and the proportions of remaining allograft material and nonmineralized tissue were 16.23% ± 10.63% and 52.71% ± 9.53%, respectively. All implants survived up to 12 months after placement. PROMs were compatible with minimal discomfort at different postoperative stages and a high level of overall satisfaction upon study completion. This study demonstrated that the reconstructive procedure employed was successful and predictable in treating large, postextraction alveolar ridge deformities to optimize tooth replacement therapy with implant-supported prostheses.

Clinical Performance of a Novel Two-Piece Abutment Concept: Results from a Prospective Study with a 1-Year Follow-Up.

Development of a stable and healthy soft-tissue barrier around dental implants is key to long-term success of implant-supported prostheses. The novel two-piece abutment concept shifts the prosthetic interface to the soft-tissue level to protect bone interface/connective tissue during the healing phase and restorative procedures. This prospective study included 72 patients treated with 106 implants to support a single-tooth or a three-unit bridge restored with two-piece abutments. The evaluation included marginal bone level change (MBLC), implant and prosthetic survival, soft-tissue health including keratinized mucosa height and mucosal margin position, patient quality of life (QoL) and satisfaction, and clinician satisfaction and ease-of-use rating of the concept. Mean MBLC from implant placement to 1 year was -0.36 ± 1.26 mm (n = 89), the 1-year implant and prosthetic survival rates were 97.1 and 96.7%, respectively, while keratinized mucosa height increased from 2.9 ± 1.2 mm at prosthetic delivery to 3.2 ± 1.3 mm, and mucosal margin migrated coronally by 0.49 ± 0.61 mm by 1 year. Patient satisfaction and QoL were high. Clinicians were satisfied with the esthetic and functional results and rated the concept as easy to use. In conclusion, the novel two-piece abutment concept promotes good peri-implant tissue health, while providing an easy-to-use workflow and high treatment satisfaction to both patients and clinicians.

Immediate Implant in Maxillary Central Incisors and Prosthetic Screw Channel: A CBCT Feasibility Study.

This study aimed to assess how frequently the maxilla anatomy allows for lingualized immediate implants in the central incisor region with a screw channel that has an ideal distance of 1.5 mm from the incisal margin. The effect of abutments with angle correction on case selection will also be verified. A retrospective cross-sectional study of 181 CBCT scans was carried out. Using an implant-planning software, implant placement was simulated in the lingual aspect of the socket. The location of the prospective screw channel was registered as incisal, lingual, or facial. The angle between the actual screw channel and the position of the ideal one was calculated. The effect of angle correction on allowing an ideal screw channel configuration was computed. Out of 161 eligible cases, 144 presented favorable anatomy for an immediate implant. The screw channel had an incisal position in 40 cases (28%), a lingual position in 60 cases (42%), and a facial position in 44 cases (30%). The screw channel could be placed at the planned distance from the incisal edge in 35 cases (24%). The position was unfavorable in the remaining 109 cases. In 103 of these cases, an abutment with an angled screw channel could make the conditions feasible. Within the simulated conditions, a majority of maxillary central incisors present favorable ridge anatomy for lingualized immediate implant placement. Achieving a proper location of the screw channel requires abutments with angle correction in a majority of cases.

Ultrathin Ceramic Veneers in the Aesthetic Zone: A 36-month Retrospective Case Series.

PURPOSE: To evaluate the incidence of ultrathin ceramic veneer fracture over a period of 36 months and the possible relationship with local- and patient-related factors. MATERIALS AND METHODS: Adult patients who received ceramic veneers for improvement in smile esthetics were selected from a private practice pool. Veneers were grouped as conventional ceramic veneers (prep) or ultrathin following either a minimal preparation (min-prep) or no tooth preparation (no-prep) protocol. After veneer bonding, all patients were followed up at intervals of 6 months up to 36 months. A panel of clinical outcomes was recorded. Patient satisfaction was assessed at 36 months. RESULTS: The study sample was formed by 49 patients who received a total of 194 veneers. Twelve veneers were prep, 125 were min-prep, and 57 were no-prep. Total fracture occurrence was 9.8% in 13 participants. No fractures were observed in prep veneers, while 16 out of 125 min-prep and 3 out of 57 no-prep veneers had fractures. Most fractures (13 out of 19) occurred early, within the first 12 months after bonding. Out of 194 veneers, only 1 had a catastrophic failure (0.5%), 3 had large (≥ 1 mm) chippings (1.5%), and 15 had minor (< 1 mm) chippings (7.7%). A generalized estimating equation model revealed that the odds of veneer fracture were significantly higher in men (odds ratio [OR] = 11.29), in patients who exhibited tooth wear at baseline (OR = 5.54), and in central (OR = 13.56) and lateral (OR = 10.43) incisors compared to canines and premolars. All participants indicated that they would not change to a different restorative protocol in order to have a thicker restoration and possibly less risk of fracture. CONCLUSION: Ultrathin ceramic veneers are a viable cosmetic dentistry treatment option that involves minimal or no tooth preparation. However, a tendency for increased early fractures was observed in the min-prep group.

Characterization of Extraction Sockets by Indirect Digital Root Analysis.

This study aimed to characterize extraction sockets based on indirect digital root analysis. The outcomes of interest were estimated socket volume and dimensions of the socket orifice. A total of 420 extracted teeth, constituting 15 complete sets of permanent teeth (except third molars), were selected. Teeth were scanned to obtain STL files of the root complex for digital analysis. After digitally sectioning each root 2.0 mm apical to the cementoenamel junction (CEJ), root volume was measured in mm3 and converted to cc. Subsequently, a horizontal section plane was drawn at the most zenithal level of the buccal CEJ, and the surface area (in mm2) and buccolingual and mesiodistal linear measurements of the socket orifice (in mm) were computed. Maxillary first molars exhibited the largest mean root volume (0.451 ± 0.096 cc) and mandibular central incisors the smallest (0.106 ± 0.02 cc). Surface area analysis demonstrated that mandibular first molars presented the largest socket orifice area (78.56 ± 10.44 mm2), with mandibular central incisors presenting the smallest area (17.45 ± 1.82 mm2). Maxillary first molars showed the largest mean socket orifice buccolingual dimension (11.08 ± 0.60 mm), and mandibular first molars showed the largest mean mesiodistal dimension (9.73 ± 0.84 mm). Mandibular central incisors exhibited the smallest mean buccolingual (5.87 ± 0.26 mm) and mesiodistal (3.52 ± 0.24 mm) linear dimensions. Findings from this study can be used by clinicians to efficiently plan extraction-site management procedures (such as alveolar ridge preservation via socket grafting and sealing) and implant provisionalization therapy, and by the industry to design products that facilitate site-specific execution of these interventions.

The fate of the distal papilla around tooth-bound implant-supported restorations in maxillary central incisor sites.

The distal papilla around tooth-bound implant-supported restorations in maxillary central incisor sites tends to exhibit an atrophied aspect after tissue maturation following the delivery of the final prosthesis. This article provides an explanation to this phenomenon, as well as a set of therapeutic considerations to minimize its occurrence and optimize the outcomes of tooth replacement therapy with dental implants in this specific anatomic location.

Assessment of gingival thickness using digital file superimposition versus direct clinical measurements.

OBJECTIVES: This study was aimed at evaluating the correlation and reproducibility of gingival thickness quantification using digital and direct clinical assessment methods. MATERIALS AND METHODS: Patients in need of tooth extraction were allocated into two groups according to the gingival thickness measurement method, either using an endodontic spreader (pre-extraction) or a spring caliper (post-extraction), both on the mid-facial (FGT) and mid-lingual (LGT). Pre-extraction Digital Imaging and COmmunications in Medicine (DICOM) and STereoLithography (STL) files of the arch of interest were obtained and merged for corresponding digital measurements. Inter-rater reliability between digital and direct assessment methods was analyzed using inter-class correlation coefficients (ICC). RESULTS: Excellent inter-rater reliability agreement was demonstrated for all parameters. Comparison between the endodontic spreader and the digital method revealed excellent agreement, with ICC of 0.79 (95% CI 0.55, 0.91) for FGT and 0.87 (95% CI 0.69, 0.94) for LGT, and mean differences of 0.08 (- 0.04 to 0.55) and 0.25 (- 0.30 to 0.81) mm for FGT and LGT, respectively. Meanwhile, the comparison between the caliper and the digital method demonstrated poor agreement, with ICC of 0.38 (95% CI - 0.06, 0.70) for FGT and 0.45 (95% CI - 0.02, 0.74) for LGT, and mean differences of 0.65 (0.14 to 1.16) and 0.64 (0.12 to 1.17) mm for FGT and LGT, respectively. CONCLUSIONS: Digital measurement of gingival thickness is comparable with direct clinical assessments performed with transgingival horizontal probing using an endodontic spreader. CLINICAL RELEVANCE: Digital assessment of gingival thickness is a non-tissue invasive, reliable, and reproducible method that could be utilized as an alternative to horizontal transgingival probing.

One- versus two-stage crown lengthening surgical procedure for aesthetic restorative purposes: A randomized controlled trial.

AIM: This randomized controlled trial aimed to assess the efficacy of a two-stage crown lengthening intervention (SCL) in the aesthetic zone compared with a one-stage crown lengthening procedure (CCL). MATERIALS AND METHODS: Thirty subjects were randomly assigned to either SCL (n = 15) or CCL (n = 15) groups. SCL consisted of full-thickness flaps followed by bone recontouring and gingivectomy 4 months postoperatively, if required. In CCL, osseous recontouring after submarginal incisions was performed, followed by flap repositioning. Records were obtained at baseline, 4 months (only in SCL), 6 months and 12 months. Primary outcome was the precision in achieving a pre-determined gingival margin position. Other outcomes considered were changes in the gingival margin position and keratinized tissue width (KTW) at 12 months, and patient-reported outcomes (PROMs). RESULTS: Surgical precision was comparable between groups (0.2 ± 0.4 mm in the CCL group and -0.2 ± 0.5 mm in the SCL group). Four patients in the SCL group (27.7%) did not require a second-stage surgery. KTW was significantly higher in the SCL group (6.3 ± 1.4 mm versus 5.0 ± 1.4 mm, p = 0.017). SCL resulted in a lower impact on quality of life when compared to the CCL group. CONCLUSIONS: Both approaches were highly accurate obtaining the desired crown length. SCL was associated with a lower reduction in KTW and more favourable oral health-related quality of life (OHIP-14).

Orthodontic Extrusion: Guidelines for Contemporary Clinical Practice.

Orthodontic extrusion (OE) is an orthodontic tooth movement in a coronal direction to modify the tooth position and/or induce changes on the surrounding bone and soft tissue with a therapeutic purpose. Evidence emanating from clinical reports and case series studies indicates that OE is a predictable treatment option to manage a variety of clinical situations. Common indications include traction of impacted teeth, exposure of teeth presenting structural damage to facilitate restorative therapy, treatment of periodontal bony and papillary defects, and implant site development. Unfortunately, there is a paucity of established protocols and guidelines for its application in clinical practice. Controversy exists in regard to the definition of rapid and slow OE, use of circumferential supracrestal fiberotomy, and tooth stabilization protocols during and upon completion of orthodontic movement. This article provides a concise perspective on the topic of OE by discussing key biologic principles and technical aspects that are translated into guidelines for the management of different clinical scenarios.

Static computer-aided, partially guided, and free-handed implant placement: A systematic review and meta-analysis of randomized controlled trials.

OBJECTIVE: To analyze the outcomes of static computer-aided implant placement (sCAIP) compared to partially guided (PGIP) and free-handed (FHIP) implant placement. MATERIAL AND METHODS: This study was registered in PROSPERO (CRD42019131397). A comprehensive literature search was performed by two independent examiners. Only randomized controlled trials (RCTs) were selected. Treatment modalities included sCAIP, PGIP, and FHIP. Data pertaining to the outcomes of interest were extracted. Random-effects meta-analyses were feasible for a subset of outcomes. RESULTS: From an initial list of 2,870 records, fourteen articles for a total of ten RCTs were selected. Data from 7 of these studies allowed for the conduction of three meta-analyses comparing accuracy of implant placement across modalities. Survival rate up to 12 months post-loading was high (>98%) and comparable between treatments (low-quality evidence). No tangible differences in terms of patient perception of intra- or postoperative discomfort were observed (low-quality evidence). Quantitative analyses revealed significantly lower angular (MD = 4.41°, 95% CI 3.99-4.83, p < .00001), coronal (MD = 0.65 mm, 95% CI 0.50-0.79, p < .00001), and apical (MD = 1.13 mm, 95% CI 0.92-1.34, p < .00001) deviation values for sCAIP as compared to FHIP (8 studies, 383 patients, 878 implants, high-quality evidence). A similar discrepancy, in favor of sCAIP, was observed for angular deviation only as compared to PGIP (MD = 2.11°, 95% CI 1.06-3.16, p < .00001). CONCLUSIONS: sCAIP is associated with superior accuracy compared to PGIP and FHIP.

Hard and soft tissue analysis of alveolar ridge preservation in esthetic zone using deproteinized bovine bone mineral and a saddle connective tissue graft: A long-term prospective case series.

AIM: Although alveolar ridge preservation (ARP) procedures appear to limit bone resorption after dental extraction, long-term outcomes remain limited. The objective of this prospective case series was to evaluate the long-term hard and soft tissue changes after ARP procedure in the aesthetic area, using deproteinized bovine bone mineral (DBBM) and saddle connective tissue graft. MATERIALS AND METHODS: Fifteen patients were subjected to ARP and impressions and CT scans were taken at baseline and 3 months. After 5 to 7 years, a secondary long-term clinical and radiological analysis was carried out. Horizontal alveolar bone changes, soft tissue profiles and implant outcomes were assessed. RESULTS: Although a limited hard and soft tissue remodeling occurred during the first 3 months after ARP, from 3 months to the long-term evaluation, the alveolar bone dimensions remained stable and the soft tissue profiles significantly increased, in the more cervical levels. The implant survival rate after 5 to 7 years yielded 100% and peri-implant bone levels and soft tissue health were good. CONCLUSION: Within the limits of the study, the present data confirms the long-term effectiveness of ARP using DBBM and a saddle connective tissue graft offering stable hard and soft tissue conditions up to 5 to 7 years.

Soft tissue stability around dental implants after soft tissue grafting from the lateral palate or the tuberosity area - A randomized controlled clinical study.

AIM: To compare the soft tissue stability (STA) around single implants previously augmented with either subepithelial connective tissue graft (SCTG) from the lateral palate (LP) or from the tuberosity area (TA). MATERIAL AND METHODS: Twenty-nine patients showing 33 implants with buccal volume deficiency randomly received SCTG from LP (control group/CG) or TA (test group/TG). At 4 months (FU-4) the definitive crown was installed and an intra-oral scan performed. At 12 months (FU-12), a new scan was registered. Between FU-4 and FU-12 STA was evaluated by STL image superimposition. Clinical parameters and the modified pink aesthetic score (PES) (Fürhauser et al. 2005) were recorded. RESULTS: After FU-4 both tissues demonstrated a similar STA without statistically significant differences (SSD). The mean soft tissue changes were 0.03 ± 0.22 mm for CG and 0.04 ± 0.23 mm for TG (p = .870). SSD were observed for changes in keratinized tissue (KT) with greater stability for TG (0 ± 0.32 mm) compared with CG (-0.3 ± 0.33 mm) (p = .002). PES resulted in mean values of 8.37 ± 2.46 for CG and 8.54 ± 2.43 for TG (p=.59). CONCLUSIONS: Both groups demonstrated similar STA between the definitive crown placement and 12 months, while greater stability of the KT gained was observed in TG.