Different Impact of Suspended Al2O3 Nanoparticles on Microbial Communities: Formation of 2D-Networks (Without Humic Acids) or 3D-Colonies (With Humic Acids).

The use of metal-based and, particularly, Al2O3 nanoparticles (Al2O3-NP) for diverse purposes is exponentially growing. However, the growth of such promissory market is not accompanied by a parallel extensive investigation related to the impact of this pollution on groundwater and biological systems. Pseudomonas species, ubiquitous, environmentally critical microbes, frequently respond to stress conditions with diverse strategies that generally include extracellular polymeric substances (EPS) formation. The aim of this study is to report that changes in the aqueous environment, particularly, the addition of Al2O3-NP without and with humic acids, induce different adaptive strategies of Pseudomonas aeruginosa early biofilms. To this purpose, early biofilms were incubated in diluted culture media without (control) and with Al2O3-NP, and with humic acids (HA-control, HA-Al2O3-NP) for 24 h. 3D colonies with EPS strings and isolated bacteria in their surroundings were detected in the control biofilms. Unlikely, an unusual adaptive behaviour was developed in the presence of Al2O3-NP. Bacteria opt to disassemble the 3D arrangements and to implement a 2D network promoting morphological and size changes of bacterial cells (small coccoid shapes). Remarkably, this strategy allows their temporarily non-EPS-depending survival without decreasing the number of cells. This behaviour was not observed with ZnO-NP, HA-Al2O3-NP, or HA-ZnO-NP. Physicochemical analysis revealed that HA were adsorbed on Al2O3-NP and promoted the Al(III) ions complexation. This supports the hypothesis that the reduction of toxicity of Al ions and the 3D colony formation in the presence of HA-Al2O3-NP is promoted by the complexation of the metal ions with HA components.

Magnetic 3D scaffolds for tissue engineering applications: bioactive glass (45S5) coated with iron-loaded hydroxyapatite nanoparticles.

Magnetic 45S5 bioactive glass (BG) based scaffolds covered with iron-loaded hydroxyapatite (Fe-HA-BG) nanoparticles were obtained and its cytotoxicity investigated. Fe-HA nanoparticles were synthesized by a wet chemical method involving the simultaneous addition of Fe2+/Fe3+ions. BG based scaffolds were prepared by the foam replica procedure and covered with Fe-HA by dip-coating. Fe-HA-BG magnetic saturation values of 0.049 emu g-1and a very low remanent magnetization of 0.01 emu g-1were observed. The mineralization assay in simulated body fluid following Kokubo's protocol indicated that Fe-HA-BG scaffolds exhibited improved hydroxyapatite formation in comparison to uncoated scaffolds at shorter immersion times. The biocompatibility of the materialin vitrowas assessed using human osteoblast-like MG-63 cell cultures and mouse bone marrow-derived stroma cell line ST-2. Overall, the results herein discussed suggest that magnetic Fe-HA coatings seem to enhance the biological performance of 45S5 BG based scaffolds. Thus, this magnetic Fe-HA coated scaffold is an interesting system for bone tissue engineering applications and warrant further investigation.

Environmentally Induced Changes of Commercial Carbon Nanotubes in Aqueous Suspensions. Adaptive Behavior of Bacteria in Biofilms.

The effects of environmental factors such as sunlight irradiation and the presence of humic acid (HA) on the physicochemical properties of commercial multiwall carbon nanotubes (MWCNT) suspended in a simulated inorganic matrix (SIM) and their impacts on bacteria growing in biofilms were evaluated. Both solar irradiation and the presence of HA lead to the dissolution of adsorbed metals on the MWCNT, which are residues of synthesis catalysts. Also, preferential adsorption of certain HA components on the MWCNT induces important modifications in the aliphatic/aromatic relationship of HA components in solution and the generation and release of new moieties. Results demonstrated that the variation of such physicochemical parameters strongly affects the interactions of MWCNT with Pseudomonas aeruginosa sessile bacteria. Thus, the number of attached bacteria increased, and stress responses such as decrease in bacterial size were found in the presence of sunlight-irradiated MWCNT with a particular distribution of extracellular polymeric substances (EPS) strands. A shielding effect was observed when HA was added. It was concluded that physicochemical alterations caused by environmental conditions (with/without irradiation, presence/absence of HA) on MWCNT-containing SIM trigger distinctive adaptive behavior of bacteria in biofilms. This information must be taken into account in the development of biologically assisted treatments for organic metal co-contamination of MWCNT-containing media since MWCNT discharge alters the physicochemical properties and composition of the aqueous environment and the response of the biofilms that interact with it.

Non-purified commercial multiwalled carbon nanotubes supported on electrospun polyacrylonitrile@polypyrrole nanofibers as photocatalysts for water decontamination.

We present a photoactive composite material for water decontamination consisting of non-purified commercial multiwalled carbon nanotubes (CNT(NP)s) supported on an electrospun polymeric mat made of core-sheath polyacrylonitrile-polypyrrole nanofibers. This is the first system that specifically exploits the superior photocatalytic activity of CNT(NP)s compared with the purified carbon nanotubes usually employed. A CNT(NP) still contains the catalytic metal oxide nanoparticles (NPs) used for its synthesis, embedded in the nanotube structure. Under UV-visible irradiation, these NPs generate highly reactive ˙OH radicals capable of degrading the organic molecules adsorbed on the nanotube. Photocatalytic tests on the composite material show that CNT(NP)s act mostly as a source of photogenerated charge carriers. The adsorption of target substrates occurs preferentially onto the polypyrrole sheath, which shuttles the reactive carriers from CNT(NP)s to the substrates. In addition, UV-visible irradiation of semiconducting polypyrrole generates radical species that directly react with the adsorbed substrates. All synthetic procedures reported are scalable and sustainable. This mechanically resistant and flexible composite overcomes one of the weakest aspects of water treatments that employ suspended nanocatalysts, namely the expensive and poorly scalable recovery of the catalyst through nanofiltration. All these features are required for large-scale photocatalytic treatments of polluted water.

Staphylococcus aureus biofilm eradication by the synergistic effect exerted by PEG-coated silicon dots immobilized in silica films and light irradiation.

Immobilization of PEG-covered silicon dots, PEGSiDs, on glass substrates was performed following a simple strategy involving particle embedding by a sol-gel process forming a silica film on glass slides. The obtained films, denoted as fSiO x -PEGSiD, constitute a water-wettable, strongly supported, photoluminescent glass coating. The films showed high capacity for photosensitizing singlet oxygen (1O2) in the UVA when immersed in water. Staphylococcus aureus colonies formed on fSiO x -PEGSiDs modified glasses revealed the inhibition of bacterial adhesion and bacterial growth leading to the formation of loosely-packed and smaller S. aureus colonies. Upon 350 nm light irradiation of the biofilmed fSiO x -PEGSiDs -modified glasses, S. aureus growth was inhibited and bacteria killed reducing the number of living bacteria by three orders of magnitude. Eradication of attached bacteria was achieved by the synergistic effect exerted by a less adherent fSiO x -PEGSiDs surface that inhibits biofilm formation and the ability of the surface to photosensitize 1O2 to kill bacteria.

BSA-capped gold nanoclusters as potential theragnostic for skin diseases: Photoactivation, skin penetration, in vitro, and in vivo toxicity.

BSA-capped gold nanoclusters are promising theragnostic systems that can be excited to render both fluorescence emission and reactive oxygen species. Although their synthesis and photoluminescence properties are already well described, more accurate information about their use as photosensitizers is required in order to advance towards health applications. In this work, we have obtained BSA-capped gold nanoclusters and characterized their photophysics by different techniques. Singlet oxygen production was detected upon irradiation, which was enough to produce toxicity on two cell lines. Remarkably, an internal energy transfer, probably due to the presence of smaller nanoclusters and the contribution of oxidized residues of BSA in the system, caused fluorescence emission near 640 nm after excitation in the UV range. Additionally, the system was capable of penetrating human skin beyond the stratum corneum, which enhances the potential of these nanoclusters as bifunctional photodynamic therapy effectors and biomarkers with application in a diversity of skin diseases. In the absence of radiation, BSA-capped gold nanoclusters did not cause toxicity in vitro, while their toxic effect on an in vivo model as zebrafish was determined.

Bioactive glass (45S5)-based 3D scaffolds coated with magnesium and zinc-loaded hydroxyapatite nanoparticles for tissue engineering applications.

Bioactive glass (BG)-based scaffolds of 45S5 composition covered with hydroxyapatite nanoparticles loaded with Mg2+, Zn2+ and, both Mg2+ and Zn2+ ions, were developed and tested as materials for tissue engineering applications. The scaffolds were prepared by the foam replica technique and mono- and bi-metal loaded and unloaded hydroxyapatite nanoparticles (HA, Zn-HA, Mg-HA and Mg-Zn-HA) were obtained by an adaptation of the wet chemical deposition method. Coating of BG with these nanoparticles was performed by dip-coating to obtain HA-BG, Zn-HA-BG, Mg-HA-BG and Mg-Zn-HA-BG scaffolds. As predictor of the bone bonding ability of the produced scaffolds, in this study we investigated the formation of an apatite layer on the scaffold surfaces in the presence of simulated body fluid. The cytotoxicity and osteogenic properties of the materials in vitro was evaluated using human osteoblast-like MG-63 cell cultures. The mineralization assay following Kokubo's protocol indicated that bi-metal loaded Mg-Zn-HA-BG scaffolds exhibited higher/faster bioactivity than mono-metal loaded scaffolds while mineralization of HA-BG, Zn-HA-BG and Mg-HA-BG was similar to that of uncoated scaffolds. Moreover, an increase of proliferation of MG-63 cells after 48 h and 7 days was measured by BrdU assays for Mg-Zn-HA-BG scaffolds. In agreement with these results, SEM images confirmed increased interaction between these scaffolds and cells, in comparison to that observed for mono-metal-loaded HA-coated scaffolds. Altogether, the obtained results suggest that nanocrystalline Mg-Zn-HA coatings enhance the biological performance of standard scaffolds of 45S5 BG composition. Thus these novel ion doped HA coated scaffolds are attractive systems for bone tissue engineering.

VUV-photolysis of aqueous solutions of hydroxylamine and nitric oxide. Effect of organic matter: phenol.

VUV-irradiation of aqueous solutions containing hydroxylamine (NH2OH) in its acid form (NH3OH+) and phenol (C6H5OH) results in the simultaneous mineralization of the organic substrate and the almost quantitative reduction of NH3OH+ to ammonium ions (NH4+). Irradiation of aqueous solutions of NH3OH+ in the absence of organic substrates showed the formation of nitrate (NO3-) and nitrite (NO2-) and minor quantities of NH4+. In line with these experiments, VUV-irradiation of aqueous solutions of nitrogen monoxide (NO˙) yields NH4+ only when C6H5OH is simultaneously mineralized. A possible reaction mechanism is discussed, where reactions of NO˙ and NH3OH+ with hydrogen atoms (H˙), hydroxyl radicals (HO˙) and hydrated electrons (e-aq), all generated by the VUV-photochemically initiated homolysis of water, are of great importance to the observed results. In the presence of phenol, competition between phenol and either NO˙ or NH3OH+ for these reactive intermediates in the primary volume of reactions strongly determines the oxidation state and nature of the N-containing products. C-Centered radicals and intermediate products of reactions may also have an important effect on the overall mechanism. The present results are discussed in relation to the actual state of knowledge presented in the literature.

Comparative toxicity of PEG and folate-derived blue-emitting silicon nanoparticles: in vitro and in vivo studies.

AIM: Amino functionalization is a first step modification aiming to achieve biomedical applications of silicon nanoparticles, for example, for photodynamic therapy or radiotherapy. Nevertheless, toxicity and low quantum yields due to the positive charge of amino groups emerge as a problem that could be solved with subsequent derivatizations. MATERIALS & METHODS: Folic and PEG-conjugated nanoparticles were obtained from amino-functionalized silicon nanoparticle (NH2SiNP). Cytotoxicity was determined on a tumor cell line at low and high concentrations. Four end points of in vivo toxicity were evaluated on zebrafish (Danio rerio). RESULTS: Folic acid functionalization reduced the cytotoxicity in comparison to amino and PEG-functionalized nanoparticles. In zebrafish, folic functionalization lowered toxicity in general while PEG increased it. CONCLUSION: Functionalization of NH2SiNP with folic acid reduced the toxic effects in vitro and in vivo. This could be useful for therapeutic applications. PEG functionalization did not lower the toxicity.

Toward biomedical application of amino-functionalized silicon nanoparticles.

Silicon blue-emitting nanoparticles (NPs) are promising effectors for photodynamic therapy and radiotherapy, because of their production of reactive oxygen species (ROS) upon irradiation. RESULTS: Amino-functionalized silicon NPs (NH2SiNP) were intrinsically nontoxic below 100 µg/ml in vitro (on two tumor cell lines) and in vivo (zebrafish larvae and embryos). NH2SiNP showed a moderate effect as a photosensitizer for photodynamic therapy and reduced ROS generation in radiotherapy, which could be indicative of a ROS scavenging effect. Encapsulation of NH2SiNP into ultradeformable liposomes improved their skin penetration after topical application, reaching the viable epidermis where neoplastic events occur. CONCLUSION: Subsequent derivatizations after amino-functionalization and incorporation to nanodrug delivery systems could expand the spectrum of the biomedical application of these kind of silicon NPs.

Visible Light Induced Cationic Polymerization of Epoxides by Using Multiwalled Carbon Nanotubes.

The visible light induced cationic polymerization of epoxides can be achieved by means of multiwalled carbon nanotubes (MWCNTs), which act as visible light photoinitiators via a radical-induced cationic photopolymerization process. When MWCNTs are irradiated with longer wavelengths (above 400 nm), they generate carbon radicals, by means of hydrogen abstraction from the epoxy monomer; these radicals are oxidized in the presence of iodonium salt to a carbocation that is sufficiently reactive to start the cationic ring-opening polymerization of an epoxy monomer. These mechanisms have been supported by electron paramagnetic resonance analysis.

Reaction kinetics and mechanisms of organosilicon fungicide flusilazole with sulfate and hydroxyl radicals.

Flusilazole is an organosilane fungicide used for treatments in agriculture and horticulture for control of diseases. The reaction kinetics and mechanism of flusilazole with sulfate and hydroxyl radicals were studied. The rate constant of the radicals with the fungicide were determined by laser flash photolysis of peroxodisulfate and hydrogen peroxide. The results were 2.0 × 109 s-1M-1 for the reaction of the fungicide with HO and 4.6 × 108 s-1 M-1 for the same reaction with SO4- radicals. The absorption spectra of organic intermediates detected by laser flash photolysis of S2O82- with flusilazole, were identified as α-aminoalkyl and siloxyl radicals and agree very well with those estimated employing the time-dependent density functional theory with explicit account for bulk solvent effects. In the continuous photolysis experiments, performed by photo-Fenton reaction of the fungicide, the main degradation products were: (bis(4-fluorophenyl)-hydroxy-methylsilane) and the non-toxic silicic acid, diethyl bis(trimethylsilyl) ester, in ten and twenty minutes of reaction, respectively.

Fluorescent silica nanoparticles with chemically reactive surface: Controlling spatial distribution in one-step synthesis.

The encapsulation of fluorescent dyes inside silica nanoparticles is advantageous to improve their quality as probes. Inside the particle, the fluorophore is protected from the external conditions and its main emission parameters remains unchanged even in the presence of quenchers. On the other hand, the amine-functionalized nanoparticle surface enables a wide range of applications, as amino groups could be easily linked with different biomolecules for targeting purposes. This kind of nanoparticle is regularly synthesized by methods that employ templates, additional nanoparticle formation or multiple pathway process. However, a one-step synthesis will be an efficient approach in this sort of bifunctional hybrid nanoparticles. A co-condensation sol-gel synthesis of hybrid fluorescent silica nanoparticle where developed. The chemical and morphological characterization of the particles where investigated by DRIFTS, XPS, SEM and SAXS. The nanoparticle fluorescent properties were also assessed by excitation-emission matrices and time resolved experiments. We have developed a one-pot synthesis method that enables the simultaneous incorporation of functionalities, the fluorescent molecule and the amino group, by controlling co-condensation process. An exhaustive characterization allows the definition of the spatial distribution of the fluorescent probe, fluorescein isothiocyanate, inside the particle and reactive amino groups on the surface of the nanoparticle with diameter about 100nm.

Polyethylene glycol-coated blue-emitting silicon dots with improved properties for uses in aqueous and biological environments.

Grafting of polyethylene glycol (PEG) to ultrasmall photoluminescent silicon dots (SiDs) is expected to improve and expand the applications of these particles to aqueous environments and biological systems. Herein we report a novel one-pot synthesis of robust, highly water compatible PEG-coated SiDs (denoted as PEG-SiDs) of (3.3 ± 0.5) nm size. The nanoparticles' synthesis is based on the liquid phase oxidation of magnesium silicide using PEG as reaction media and leading to high PEG density grafting. PEG-SiDs enhanced photophysical, photosensitising, and solution properties in aqueous environments are described and compared to those of 2 nm size PEG-coated SiDs with low PEG density grafting (denoted as PEG-NHSiDs) obtained from a multistep synthesis strategy. PEG-SiDs form highly dispersed suspensions in water showing stable photoluminescence and quantum yields of Φ = 0.13 ± 0.04 at 370 nm excitation in air-saturated suspensions. These particles exhibited the capacity of photosensitising the formation of singlet molecular oxygen, not observed for PEG-NHSiDs. PEG robust shielding of the silicon core luminescent properties is further demonstrated in bio-imaging experiments stressing the strong interaction between PEG-SiDs and Staphylococcus aureus smears by observing the photoluminescence of particles. PEG-SiDs were found to be nontoxic to S. aureus cells at concentrations of 100 mg ml-1, though a bacteriostatic effect on S. aureus biofilms was observed upon UV-A irradiation under conditions where light alone has no effect.

Paramagnetic iron-doped hydroxyapatite nanoparticles with improved metal sorption properties. A bioorganic substrates-mediated synthesis.

This paper describes the synthesis of paramegnetic iron-containing hydroxyapatite nanoparticles and their increased Cu(2+) sorbent capacity when using Ca(2+) complexes of soluble bioorganic substrates from urban wastes as synthesis precursors. A thorough characterization of the particles by TEM, XRD, FTIR spectroscopy, specific surface area, TGA, XPS, and DLS indicates that loss of crystallinity, a higher specific area, an increased surface oxygen content, and formation of surface iron phases strongly enhance Cu(2+) adsorption capacity of hydroxyapatite-based materials. However, the major effect of the surface and morphologycal modifications is the size diminution of the aggregates formed in aqueous solutions leading to an increased effective surface available for Cu(2+) adsorption. Maximum sorption values of 550-850 mg Cu(2+) per gram of particles suspended in an aqueous solution at pH 7 were determined, almost 10 times the maximum values observed for hydroxyapatite nanoparticles suspensions under the same conditions.

One-electron oxidation of antioxidants: a kinetic-thermodynamic correlation.

The values of the bimolecular rate constants for the reactions of 2,2'-azino-bis(3-ethylbenz-thiazoline-6-sulfonic acid) radical cation with epicatechin (((2.4 ± 0.2)) s(-1) M(-1)), and epigallocatechingallate ((29 ± 5) s(-1) M(-1)) were obtained by spectrophotometric measurements. We propose a correlation between the Gibbs energy ΔG(o) for the one-electron charge-transfer reactions from several antioxidants to radical species and the rate constants of the corresponding bimolecular reactions. This correlation can be used to predict rate constants of reactions of known ΔG(o) values.

Oxidized silicon nanoparticles for radiosensitization of cancer and tissue cells.

The applicability of ultrasmall uncapped and aminosilanized oxidized silicon nanoparticles (SiNPs and NH2-SiNPs) as radiosensitizer was studied by internalizing these nanoparticles into human breast cancer (MCF-7) and mouse fibroblast cells (3T3) that were exposed to X-rays at a single dose of 3 Gy. While SiNPs did not increase the production of reactive oxygen species (ROS) in X-ray treated cells, the NH2-SiNPs significantly enhanced the ROS formation. This is due to the amino functionality as providing positive surface charges in aqueous environment. The NH2-SiNPs were observed to penetrate into the mitochondrial membrane, wherein these nanoparticles provoked oxidative stress. The NH2-SiNPs induced mitochondrial ROS production was confirmed by the determination of an increased malondialdehyde level as representing a gauge for the extent of membrane lipid peroxidation. X-ray exposure of NH2-SiNPs incubated MCF-7 and 3T3 cells increased the ROS concentration for 180%, and 120%, respectively. Complementary cytotoxicity studies demonstrate that these silicon nanoparticles are more cytotoxic for MCF-7 than for 3T3 cells.

Chloride anion effect on the advanced oxidation processes of methidathion and dimethoate: role of Cl2(·-) radical.

The reaction of phosphor-containing pesticides such as methidathion (MT) and dimethoate (DM) with dichloride radical anions (Cl(2)(·-)) was investigated. The second order rate constants (1.3 ± 0.4) × 10(8) and (1.1 ± 0.4) × 10(8) M(-1) s(-1) were determined for the reaction of Cl(2)(·-) with MT and DM, respectively. A reaction mechanism involving an initial charge transfer from the sulfide groups of the insecticides to Cl(2)(·-) is proposed and supported by the identified transient intermediates and reaction products. The formation of chlorinated byproducts was determined. The unexpected consequences of an efficient Cl(2)(·-) reactivity towards MT and DM on the degradation capacity by Advanced Oxidation Procedures applied to polluted waters containing the insecticides and Cl(-) anions is discussed.

Evaluation of the Hg2+ binding potential of fulvic acids from fluorescence excitation-emission matrices.

The effect of Hg(2+) on the fluorescence intensity of three fulvic acids (Pahokee Peat, Pony Lake and Suwannee River) was studied. The fluorescence intensity decreased in the presence of added Hg(2+), while the fluorescence lifetimes were independent of the concentration of Hg(2+) in solution. These results are indicative of ground-states association between the fulvic acids and Hg(2+) with formation of stable non-fluorescent complexes (static quenching process). The analysis of the excitation-emission matrices with the Singular Value Decomposition (SVD) and Multivariate Curve Resolution-Alternating Least Squares (MCR-ALS) methods provided additional valuable information regarding the binding properties between Hg(2+) ions and specific fluorescence components of the fulvic acids. The three fulvic acids were shown to contain the same three groups of fluorophores characterized by excitation/emission pairs in the following regions: (320-330 nm/425-450 nm), (370-375 nm/465-500 nm), (290-295 nm/370-395 nm). These pairs are almost not affected by the change of pH from 2.0 to 7.0. Ryan-Weber and modified Stern-Volmer methods were used to analyze the static fluorescence quenching of the individual components. Similar conditional stability constants of Hg(2+) binding for the three components were found by both methods. The obtained log K values are in the range of 4.4 to 5.4.

Photoinduced reduction of divalent mercury by quinones in the presence of formic acid under anaerobic conditions.

The laser flash photolysis technique (λ(exc)=355 nm) was used to investigate the mechanism of the HgCl(2) reduction mediated by CO(2)(-) radicals generated from quenching of the triplet states of 1,4-naphthoquinone (NQ) by formic acid. Kinetic simulations of the experimental signals support the proposed reaction mechanism. This system is of potential interest in the development of UV-A photoinduced photolytic procedures for the treatment of Hg(II) contaminated waters. The successful replacement of NQ with a commercial fulvic acid, as a model compound of dissolved organic matter, showed that the method is applicable to organic matter-containing waters without the addition of quinones.