Polymer/magnetite carriers functionalized by HER2-DARPin: Avoiding lysosomes during internalization and controlled toxicity of doxorubicin by focused ultrasound induced release.

Nanomedicine has revolutionized the available treatment options during the last decade, but poor selectivity of targeted drug delivery and release is still poses a challenge. In this study, doxorubicin (DOX) and magnetite nanoparticles were encapsulated by freezing-induced loading, coated with polymeric shell bearing two bi-layers of polyarginine/dextran sulphate and finally modified with HER2-specific DARPin proteins. We demonstrated that the enhanced cellular uptake of these nanocarriers predominantly occurs by SKOV-3 (HER2+) cells, in comparison to CHO (HER2-) cells, together with the controlled DOX release using low intensity focused ultrasound (LIFU). In addition, a good ability of DARPin+ capsules to accumulate in the tumor and the possibility of combination therapy with LIFU were demonstrated. A relatively high sensitivity of the obtained nanocarriers to LIFU and their preferential interactions with mitochondria in cancer cells make these carriers promising candidates for cancer treatment, including novel approaches to overcome drug resistance.

Hybrid PCL/CaCO3 scaffolds with capabilities of carrying biologically active molecules: Synthesis, loading and in vivo applications.

Designing advanced biomaterials for tissue regeneration with drug delivery and release functionalities remains a challenge in regenerative medicine. In this research, we have developed novel composite scaffolds based on polymeric polycaprolactone fibers coated with porous calcium carbonate structures (PCL/CaCO3) for tissue engineering and have shown their drug delivery and release in rats. In vivo biocompatibility tests of PCL/CaCO3 scaffolds were complemented with in vivo drug release study, where tannic acid (TA) was used as a model drug. Release of TA from the scaffolds was realized by recrystallization of the porous vaterite phase of calcium carbonate into the crystalline calcite. Cell colonization and tissue vascularization as well as transplantability of developed PCL/CaCO3+TA scaffolds were observed. Detailed study of scaffold transformations during 21-day implantation period was followed by scanning electron microscopy and X-ray diffraction studies before and after in vivo implantation. The presented results demonstrate that PCL/CaCO3 scaffolds are attractive candidates for implants in bone regeneration and tissue engineering with a possibility of loading biologically active molecules and controlled release.

Light-induced antibacterial activity of electrospun chitosan-based material containing photosensitizer.

Increasing antimicrobial resistance requires the development of novel materials and approaches for treatment of various infections. Utilization of photodynamic therapy represents an advanced alternative to antibiotics and metal-based agents. Here, we report the fabrication of electrospun material that possesses benefits of both topical antimicrobial and photodynamic therapies. This material combines chitosan, as a biocompatible polymer, and a second generation photosensitizer. The incorporation of photosensitizer doesn't affect the material morphology and its nearly uniform distribution in fibers structure was observed by confocal Raman microscopy. Owing to photosensitizer the prepared material exhibits the light-induced and spatially limited antimicrobial activity that was demonstrated against Staphylococcus aureus, an important etiological infectious agent. Such material can be potentially used in antibacterial therapy of chronic wounds, infections of diabetic ulcers, and burns, as well as rapidly spreading and intractable soft-tissue infections caused by resistant bacteria.

Photodynamic therapy platform based on localized delivery of photosensitizer by vaterite submicron particles.

The elaboration of biocompatible and biodegradable carriers for photosensitizer targeted delivery is one of the most promising approaches in a modern photodynamic therapy (PDT). This approach is aimed at reducing sides effects connected with incidental toxicity in healthy tissue whilst also enhancing drug accumulation in the tumour area. In the present work, Photosens-loaded calcium carbonate (CaCO3) submicron particles in vaterite modification are proposed as a novel platform for anticancer PDT. Fast penetration of the carriers (0.9±0.2µm in diameter) containing 0.12% (w/w) of the photosensitizer into NIH3T3/EGFP cells is demonstrated. The captured particles provide the dye localization inside the cell increasing its local concentration, compared with "free" Photosens solution which is uniformly distributed throughout the cell. The effect of photosensitizer encapsulation into vaterite submicron particles on cell viability under laser irradiation (670nm, 19mW/cm(2), 10min) is discussed in the work. As determined by a viability assay, the encapsulation renders Photosens more phototoxic. By this means, CaCO3 carriers allow improvement of the photosensitizer effectiveness supposing, therefore, the reduction of therapeutic dose. Summation of these effects with the simplicity, upscalability and cheapness of fabrication, biocompatibility and high payload ability of the vaterite particles hold out the prospect of a novel PDT platform.

Photosensitizer-loaded electrospun chitosan-based scaffolds for photodynamic therapy and tissue engineering.

Novel chitosan-based nanofibrous composite materials containing different amounts of the photosensitizer Photosens were obtained by electrospinning and were characterized by scanning electron microscopy and by confocal laser scanning microscopy. The release of Photosens from the materials was investigated in water and in phosphate-buffered saline. A noncancerous (MC3T3-E1 murine osteoblasts) and a cancerous [T-47D (mammary gland)] cell line were cultivated on Photosens-containing scaffolds, and cell growth and metabolic activity were examined by confocal laser scanning microscopy and by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphe-nyltetrazolium bromide assay, respectively. The viability of both cell lines on Photosens-containing fibers decreased in a spatial manner upon laser irradiation of an appropriate wavelength and power density. Interestingly, the noncancerous MC3T3-E1 cells grown on Photosens -containing scaffolds were less affected by the irradiation. We conclude that the Photosens-containing electrospun chitosan nanofibers described here are of potential interest for biomedical applications, particularly topical photodynamic therapy and tissue engineering.

Impact of high-frequency ultrasound on nanocomposite microcapsules: in silico and in situ visualization.

The impact of high-frequency (1.2 MHz) ultrasound with a power density of 0.33 W cm(-2) on microcapsule nanocomposite shells with embedded zinc oxide nanoparticles was investigated by exploring modeling simulations and direct visualization. For the first time the sonication effect has been monitored in situ on individual microcapsules upon exposure of their aqueous suspension to ultrasound. The stress distribution on the microcapsule shell for the impact of ultrasound with high (1.2 MHz) and low (20 kHz) frequency at two fixed intensities (0.33 and 30 W cm(-2)) has been modeled. As shown in silico and experimentally the nanocomposite microcapsules were destroyed more effectively by the action of high-frequency (1.2 MHz) ultrasound in comparison to the low frequency (20 kHz) one with the same power density.

Liposomes loaded with hydrophilic magnetite nanoparticles: Preparation and application as contrast agents for magnetic resonance imaging.

Magnetic fluid-loaded liposomes (MFLs) were fabricated using magnetite nanoparticles (MNPs) and natural phospholipids via the thin film hydration method followed by extrusion. The size distribution and composition of MFLs were studied using dynamic light scattering and spectrophotometry. The effective ranges of magnetite concentration in MNPs hydrosol and MFLs for contrasting at both T2 and T1 relaxation were determined. On T2 weighted images, the MFLs effectively increased the contrast if compared with MNPs hydrosol, while on T1 weighted images, MNPs hydrosol contrasting was more efficient than that of MFLs. In vivo magnetic resonance imaging (MRI) contrasting properties of MFLs and their effects on tumor and normal tissues morphology, were investigated in rats with transplanted renal cell carcinoma upon intratumoral administration of MFLs. No significant morphological changes in rat internal organs upon intratumoral injection of MFLs were detected, suggesting that the liposomes are relatively safe and can be used as the potential contrasting agents for MRI.

Size controlled hydroxyapatite and calcium carbonate particles: synthesis and their application as templates for SERS platform.

An elegant route for hydroxyapatite (HA) particle synthesis via ionic exchange reaction is reported. Calcium carbonate particles (CaCO3) were recrystallized into HA beads in water solution with phosphate ions. The size of initial CaCO3 particles was controlled upon the synthesis by varying the amount of ethylene glycol (EG) in aqueous solution. The average size of HA beads ranged from 0.6±0.1 to 4.3±1.1µm. Silver nanoparticles were deposited on the surface of HA and CaCO3 particles via silver mirror reaction. Surface enhanced Raman scattering of silver functionalized beads was demonstrated by detecting Rhodamine B. CaCO3 and HA particles have a great potential for design of carrier which can provide diagnostic and therapeutic functions.

Effect of layer-by-layer electrostatic assemblies on the surface potential and current voltage characteristic of metal-insulator-semiconductor structures.

In the present Article, the Kelvin probe method for surface potential measurement is introduced to study polyelectrolyte multilayer coatings deposited on silicon plates. Metal-insulator-semiconductor (MIS) structures with polyelectrolyte layers as insulator were fabricated. The polyelectrolyte layer deposition on the surface of silicon plates led to a change of the current-voltage characteristics connected with resistance changes of the MIS structures. Poly(ethylenimine) (PEI) monolayer formation resulted in resistance decrease, and the following increase of the polyelectrolyte layer number led to MIS structure resistance increase. The results are interpreted as an interplay between accumulation of majority carriers (electrons) near the semiconductor surface and resistance increase due to insulating polyelectrolyte adsorption, and both effects can be discriminated by varying the polyelectrolyte layer thickness.

Novel type of self-assembled polyamide and polyimide nanoengineered shells--fabrication of microcontainers with shielding properties.

Two types of microcontainers were prepared by using the adsorption of polyamide on the surface of micrometer-sized inorganic porous calcium carbonate microparticles followed by thermal conversion of the polyamide layers into polyimide coatings. The effect of the preparation conditions on the structure and morphology of the microcontainers was studied by transmission electron microscopy and scanning electron microscopy. The smoothest and defect-free coatings were prepared using polyethylenimine as the supporting polymer. The thickness of the polyamide/polyimide shells was estimated by atomic force microscopy and scanning electron microscopy between 50 and 150 nm depending on the quantity of the layers. The water-soluble antibiotic, doxorubicin hydrochloride, was used as a model compound to demonstrate the efficiency of the microcontainers for encapsulation. The resistance of the novel microcontainers to solvent treatment was visualized by the confocal scanning fluorescence microscopy. It was demonstrated that the combination of the high thermal and chemical resistance of polyamide/polyimide shell and the sorption capacity of the CaCO3 is very useful for development of highly protective microcontainers and thermal detectors for smart fabrics.