Constructed wetlands for the removal of organic micropollutants from wastewater: Current status, progress, and challenges.

In this work, the practical utility of constructed wetlands (CWs) is described as a promising treatment option for micropollutants (MPs) in wastewater with the aid of their eco-friendly, low-energy, economically feasible, and ecologically sustainable nature. This paper offers a comprehensive review on CW technology with respect to the key strategies for MP removal such as phytoremediation, substrate adsorption, and microbial degradation. It explores the important factors controlling the performance of CWs (e.g., in terms of configurations, substrates, plant-microbe interactions, temperature, pH, oxygen levels, hydraulic loading rate, and retention time) along with the discussions on the pivotal role of microbial populations in CWs and plant-microbe cooperative remediation dynamics, particularly in relation to diverse organic MP patterns in CWs. As such, this review aims to provide valuable insights into the key strategies for optimizing MP treatment and for enhancing the efficacy of CW systems. In addition, the process-based models of constructed wetlands along with the numerical simulations based on the artificial neural network (ANN) method are also described in association with the data exploratory techniques. This work is thus expected to help open up new possibilities for the application of plant-microbe cooperative remediation approaches against diverse patterns of organic MPs present in CWs.

Experimental and Theoretical Investigations of MAPbX3 -Based Perovskites (X=Cl, Br, I) for Photovoltaic Applications.

This work mainly focuses on synthesizing and evaluating the efficiency of methylammonium lead halide-based perovskite (MAPbX3 ; X=Cl, Br, I) solar cells. We used the colloidal Hot-injection method (HIM) to synthesize MAPbX3 (X=Cl, Br, I) perovskites using the specific precursors and organic solvents under ambient conditions. We studied the structural, morphological and optical properties of MAPbX3 perovskites using XRD, FESEM, TEM, UV-Vis, PL and TRPL (time-resolved photoluminescence) characterization techniques. The particle size and morphology of these perovskites vary with respect to the halide variation. The MAPbI3 perovskite possesses a low band gap and low carrier lifetime but delivers the highest PCE among other halide perovskite samples, making it a promising candidate for solar cell technology. To further enrich the investigations, the conversion efficiency of the MAPbX3 perovskites has been evaluated through extensive device simulations. Here, the optical constants, band gap energy and carrier lifetime of MAPbX3 were used for simulating three different perovskite solar cells, namely I, Cl or Br halide-based perovskite solar cells. MAPbI3 , MAPbBr3 and MAPbCl3 absorber layer-based devices showed ~13.7 %, 6.9 % and 5.0 % conversion efficiency. The correlation between the experimental and SCAPS simulation data for HIM-synthesized MAPBX3 -based perovskites has been reported for the first time.

A holistic approach for process intensification of nicotinamide mononucleotide production via high cell density cultivation under exponential feeding strategy.

Nicotinamide mononucleotide (NMN) subsists in all living organisms and has drawn tremendous attention as a nutraceutical and pharmaceutical product for several diseases such as Alzheimer's, cancer, aging, and vascular dysfunction. Here, NMN was produced intracellularly in a high cell density bioreactor using an engineered Escherichiacoli strain via exponential feeding of co-substrates. Fed-batch culture via exponential feeding of co-substrate (glucose) and continuous feeding of substrate (nicotinamide) were performed using different cumulative nicotinamide concentrations. The highest concentration of 19.3 g/L NMN with a dry cell weight of 117 g/L was acquired from a cumulative nicotinamide concentration of 7.2 g/L with a conversion of 98 % from nicotinamide in 28 h. Further, liquid chromatography-mass spectrometry analysis validated the NMN production. This approach will be beneficial in achieving simultaneously low cost and ensuring high quality and quantity of NMN production.

Voltage- and Power-Conversion Performance of Bi-functional ZrO2 : Er3+ / Yb3+ Assisted and Co-sensitized Dye Sensitized Solar Cells for Internet of Things Applications.

Giant power conversion efficiency is achieved by using bifunction ZrO2 : Er3+ /Yb3+ assisted co-sensitised dye-sensitized solar cells. The evolution of the crystalline structure and its microstructure are examined by X-ray diffraction, scanning electron microscopy studies. The bi-functional behaviour of ZrO2 : Er3+ /Yb3+ as upconversion, light scattering is confirmed by emission and diffused reflectance studies. The bi-function ZrO2 : Er3+ /Yb3+ (pH=3) assisted photoanode is co-sensitized by use of N719 dye, squaraine SPSQ2 dye and is sandwiched with Platinum based counter electrode. The fabricated DSSC exhibited a giant power conversion efficiency of 12.35 % with VOC of 0.71 V, JSC of 27.06 mA/cm2 , FF of 0.63. The results, which motivated the development of a small DSSC module, gave 6.21 % and is used to drive a tiny electronic motor in indoor and outdoor lighting conditions. Small-area DSSCs connected in series have found that a VOC of 4.52 V is sufficient to power up Internet of Things (IoT) devices.

Valorization of organic wastes using bioreactors for polyhydroxyalkanoate production: Recent advancement, sustainable approaches, challenges, and future perspectives.

Microbial polyhydroxyalkanoates (PHA) are encouraging biodegradable polymers, which may ease the environmental problems caused by petroleum-derived plastics. However, there is a growing waste removal problem and the high price of pure feedstocks for PHA biosynthesis. This has directed to the forthcoming requirement to upgrade waste streams from various industries as feedstocks for PHA production. This review covers the state-of-the-art progress in utilizing low-cost carbon substrates, effective upstream and downstream processes, and waste stream recycling to sustain entire process circularity. This review also enlightens the use of various batch, fed-batch, continuous, and semi-continuous bioreactor systems with flexible results to enhance the productivity and simultaneously cost reduction. The life-cycle and techno-economic analyses, advanced tools and strategies for microbial PHA biosynthesis, and numerous factors affecting PHA commercialization were also covered. The review includes the ongoing and upcoming strategies viz. metabolic engineering, synthetic biology, morphology engineering, and automation to expand PHA diversity, diminish production costs, and improve PHA production with an objective of "zero-waste" and "circular bioeconomy" for a sustainable future.

Differential expression of aquaporin genes and the influence of environmental hypertonicity on their expression in juveniles of air-breathing stinging catfish (Heteropneustes fossilis).

Aquaporins (AQPs) are a superfamily of transmembrane channel proteins that are responsible for the transport of water and some other molecules to and from the cell, mainly for osmoregulation under anisotonicity. We investigated here the expression patterns of different AQP isoforms and also during exposure to hypertonicity (300 mOsmol/L) for 48 h in juvenile stages of air-breathing stinging catfish (Heteropneustes fossilis). A total of 8 mRNA transcripts for different isoforms of AQPs and their translated proteins could be detected in the anterior and posterior regions of S1, S2, and S3 stages of juveniles of stinging catfish at variable levels. In general, more expression of mRNAs for different aqp genes was seen in the S2 and S3 juveniles than in the S1 juveniles. Most interestingly, exposure to hypertonicity of S2 juveniles for a period of 48 h led to increased expression of most of the aqp genes both at transcriptional and translational levels, except for aqp3 in the anterior and posterior regions and aqp1 in the anterior region, showing maximum expression at later stages of hypertonic exposure. Thus, it is evident that AQPs play crucial roles in maintaining the water and ionic balances under anisotonic conditions even at the early developmental stages of stinging catfish as a biochemical adaptational strategy to survive and grow in anisotonic environment.

Green Production of Functionalized Few-Layer Graphene-Silver Nanocomposites Using Gallnut Extract for Antibacterial Application.

Recently, there has been much attention paid to functionalized few-layer graphene (FFG) owing to its many biomedical applications, such as in bioimaging, biosensors, drug delivery, tissue scaffolds, nanocarriers, etc. Hence, the preparation of FFG has now become of great interest to researchers. The present study systematically investigates the utilization of gallnut extract (GNE) during the process of high-shear exfoliation for the efficient conversion of expanded graphite to FFG. Various parameters, such as GNE concentration, graphite concentration, exfoliation time, and the rotation speed of the high-shear mixer, were initially optimized for FFG production. The prepared FFG was characterized in terms of surface functionality and morphology using Raman spectra, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy, and scanning electron microscopy analyses. Further, the conjugation of FFG with Ag was confirmed by XRD, XPS, and energy-dispersive X-ray spectra. The Ag-FFG composite exhibited antibacterial activity against both Gram-positive and Gram-negative bacteria through the agar well diffusion method. This study provides an efficient, economical, and eco-friendly FFG and Ag-FFG production method for biomedical applications.

Electrohydrodynamics Analysis of Dielectric 2D Nanofluids.

The purpose of this present study is to prepare a stable mineral-oil (MO)-based nanofluid (NF) for usage as a coolant in a transformer. Nanoparticles (NPs) such as hexagonal boron nitride (h-BN) and titanium oxide (TiO2) have superior thermal and electrical characteristics. Their dispersion into MO is likely to elevate the electrothermal properties of NFs. Therefore, different batches of NFs are prepared by uniformly dispersing the insulating h-BN and semiconducting TiO2 NP of different concentrations in MO. Bulk h-BN NP of size 1µm is exfoliated into 2D nanosheets of size 150-200 nm, subsequently enhancing the surface area of exfoliated h-BN (Eh-BN). However, from the zeta-potential analysis, NP concentration of 0.01 and 0.1 wt.% are chosen for further study. The thermal conductivity and ACBDV studies of the prepared NF are performed to investigate the cooling and insulation characteristics. The charging-dynamics study verifies the enhancement in ACBDV of the Eh-BN NF. Weibull statistical analysis is carried out to obtain the maximum probability of ACBDV failure, and it is observed that 0.01 wt.% based NF has superior cooling and insulation properties than MO and remaining batches of NFs.

Nanomaterial-Based Therapy for Wound Healing.

Poor wound healing affects millions of people globally, resulting in increased mortality rates and associated expenses. The three major complications associated with wounds are: (i) the lack of an appropriate environment to enable the cell migration, proliferation, and angiogenesis; (ii) the microbial infection; (iii) unstable and protracted inflammation. Unfortunately, existing therapeutic methods have not solved these primary problems completely, and, thus, they have an inadequate medical accomplishment. Over the years, the integration of the remarkable properties of nanomaterials into wound healing has produced significant results. Nanomaterials can stimulate numerous cellular and molecular processes that aid in the wound microenvironment via antimicrobial, anti-inflammatory, and angiogenic effects, possibly changing the milieu from nonhealing to healing. The present article highlights the mechanism and pathophysiology of wound healing. Further, it discusses the current findings concerning the prospects and challenges of nanomaterial usage in the management of chronic wounds.

Selenite bioreduction and biosynthesis of selenium nanoparticles by Bacillus paramycoides SP3 isolated from coal mine overburden leachate.

A native strain of Bacillus paramycoides isolated from the leachate of coal mine overburden rocks was investigated for its potential to produce selenium nanoparticles (SeNPs) by biogenic reduction of selenite, one of the most toxic forms of selenium. 16S rDNA sequencing was used to identify the bacterial strain (SP3). The SeNPs were characterized using spectroscopic (UV-Vis absorbance, dynamic light scattering, X-ray diffraction, and Raman), surface charge measurement (zeta potential), and ultramicroscopic (FESEM, EDX, FETEM) analyses. SP3 exhibited extremely high selenite tolerance (1000 mM) and reduced 10 mM selenite under 72 h to produce spherical monodisperse SeNPs with an average size of 149.1 ± 29 nm. FTIR analyses indicated exopolysaccharides coating the surface of SeNPs, which imparted a charge of -29.9 mV (zeta potential). The XRD and Raman spectra revealed the SeNPs to be amorphous. Furthermore, biochemical assays and microscopic studies suggest that selenite was reduced by membrane reductases. This study reports, for the first time, the reduction of selenite and biosynthesis of SeNPs by B. paramycoides, a recently discovered bacterium. The results suggest that B. paramycoides SP3 could be exploited for eco-friendly removal of selenite from contaminated sites with the concomitant biosynthesis of SeNPs.

Fabrication of GaN nano-towers based self-powered UV photodetector.

The fabrication of unique taper-ended GaN-Nanotowers structure based highly efficient ultraviolet photodetector is demonstrated. Hexagonally stacked, single crystalline GaN nanocolumnar structure (nanotowers) grown on AlN buffer layer exhibits higher photocurrent generation due to high quality nanotowers morphology and increased surface/volume ratio which significantly enhances its responsivity upon ultraviolet exposure leading to outstanding performance from the developed detection device. The fabricated detector display low dark current (~ 12 nA), high ILight/IDark ratio (> 104), fast time-correlated transient response (~ 433 µs) upon ultraviolet (325 nm) illumination. A high photoresponsivity of 2.47 A/W is achieved in self-powered mode of operation. The reason behind such high performance could be attributed to built-in electric field developed from a difference in Schottky barrier heights will be discussed in detail. While in photoconductive mode, the responsivity is observed to be 35.4 A/W @ - 3 V along with very high external quantum efficiency (~ 104%), lower noise equivalent power (~ 10-13 WHz-1/2) and excellent UV-Vis selectivity. Nanotower structure with lower strain and dislocations as well as reduced trap states cumulatively contributed to augmented performance from the device. The utilization of these GaN-Nanotower structures can potentially be useful towards the fabrication of energy-efficient ultraviolet photodetectors.

Amphiphilic DTPA Multimer Assembled on Icosahedral Closo-Borane Motif as High-Performance MRI Blood Pool Contrast Agent.

A multimeric MRI blood pool contrast agent based on the closo-borane motif is reported. Twelve copies of an amphiphilic DTPA chelate with amine end groups are appended on carbonate-functionalized closo-borane motif using carbamate linkages. The presence of peripheral phenyl groups on the modified DTPA chelates results in high human serum albumin binding, high relaxivity, and excellent contrast enhancement in vitro and in vivo.

Graphene Quantum Dot-Sensitized ZnO-Nanorod/GaN-Nanotower Heterostructure-Based High-Performance UV Photodetectors.

The fabrication of a superior-performance ultraviolet (UV) photodetector utilizing graphene quantum dots (GQDs) as a sensitization agent on a ZnO-nanorod/GaN-nanotower heterostructure has been realized. GQD sensitization displays substantial impact on the electrical as well as the optical performance of a heterojunction UV photodetector. The GQD sensitization stimulates charge carriers in both ZnO and GaN and allows energy band alignment, which is realized by a spontaneous time-correlated transient response. The fabricated device demonstrates an excellent responsivity of 3.2 × 103 A/W at -6 V and displays an enhancement of ∼265% compared to its bare counterpart. In addition, the fabricated heterostructure UV photodetector exhibits a very high external quantum efficiency of 1.2 × 106%, better switching speed, and signal detection capability as low as ∼50 fW.

Au-Nanoplasmonics-Mediated Surface Plasmon-Enhanced GaN Nanostructured UV Photodetectors.

The nanoplasmonic impact of chemically synthesized Au nanoparticles (Au NPs) on the performance of GaN nanostructure-based ultraviolet (UV) photodetectors is analyzed. The devices with uniformly distributed Au NPs on GaN nanostructures (nanoislands and nanoflowers) prominently respond toward UV illumination (325 nm) in both self-powered as well as photoconductive modes of operation and have shown fast and stable time-correlated response with significant enhancement in the performance parameters. A comprehensive analysis of the device design, laser power, and bias-dependent responsivity and response time is presented. The fabricated Au NP/GaN nanoflower-based device yields the highest photoresponsivity of ∼ 380 mA/W, detectivity of ∼ 1010 jones, reduced noise equivalent power of ∼ 5.5 × 10-13 W Hz-1/2, quantum efficiency of ∼ 145%, and fast response/recovery time of ∼40 ms. The report illustrates the mechanism where light interacts with the chemically synthesized nanoparticles guided by the surface plasmon to effectively enhance the device performance. It is observed that the Au NP-stimulated local surface plasmon resonance effect and reduced channel resistance contribute to the augmented performance of the devices. Further, the decoration of low-dimensional Au NPs on GaN nanostructures acts as a detection enhancer with a fast recovery time and paves the way toward the realization of energy-efficient optoelectronic device applications.

Valorization of coal fired-fly ash for potential heavy metal removal from the single and multi-contaminated system.

In this study, adsorption of three different heavy metals i.e. cadmium (Cd (II)), copper (Cu (II)) and nickel (Ni (II)) was carried out in single and multi-contaminated system using coal-fired fly ash (CFFA). Initially, for the single contaminated system, various physical process parameters were selected for optimization by deploying Box-Behnken design of experiments. Further, the evaluation of CFFA for removal of heavy metals in a multi-component system from aqueous solution was performed by employing Plackett-Burman design of experiments with all the three heavy metals at two different levels by varying their initial concentration (10-50 mg L-1). In both the aforementioned cases, CFFA showed its great potential for heavy metal removal, i.e. single and multi-component system and followed the order: Cu (II) > Ni (II) > Cd (II). Further, FTIR study confirmed the involvement of amide, aldehyde, alkoxy, alkanes, and alkene groups for heavy metal adsorption by CFFA.

A multimeric MRI contrast agent based on a closo-borane scaffold bearing modified AAZTA chelates on the periphery.

A multimeric MRI contrast agent based on the closo-borane motif is reported. Twelve copies of a modified AAZTA chelate with an alkyne end group are appended on an azide-functionalized closo-borane motif using Cu(i) catalyzed click chemistry. The presence of two water molecules on the Gd-bound AAZTA chelate results in high relaxivity for the closomer in vitro/in vivo.

Rice based distillers dried grains with solubles as a low cost substrate for the production of a novel rhamnolipid biosurfactant having anti-biofilm activity against Candida tropicalis.

In this study, rhamnolipid (RL) production by Pseudomonas aeruginosa SS14 utilizing rice based Distillers Dried Grains with Solubles (rDDGS) as the sole carbon source was evaluated and the production parameters were optimized using response surface methodology. Highest RL (RL-rDDGS) yield was 14.87 g/L in a culture medium containing 12% (w/v) rDDGS and 11% (v/v) inoculum concentration after 48 h of fermentation at 35 °C. RL-rDDGS was produced as a mixture of mono and di-RL congeners with four novel homologues Rha-C18:2, Rha-C19, Rha-C9, and Rha-Rha-C19. The RL reduced the surface tension of water to 34.8 mN/m at a critical micelle concentration (CMC) value of 100 mg/L, exhibited high stability at a wide range of pH (6-12), heating time (0-120 min), and salinity (2-12% NaCl). Furthermore, RL-rDDGS demonstrated appreciable biofilm disruptive property against Candida tropicalis. This is the first report on the usage of rDDGS for sustainable and low cost production of RL.

Novel waste-derived biochar from biomass gasification effluent: preparation, characterization, cost estimation, and application in polycyclic aromatic hydrocarbon biodegradation and lipid accumulation by Rhodococcus opacus.

This study evaluated an enhancement of simultaneous polycyclic aromatic hydrocarbon (PAH) biodegradation and lipid accumulation by Rhodococcus opacus using biochar derived cheaply from biomass gasification effluent. The chemical, physical, morphological, thermal, and magnetic properties of the cheaply derived biochar were initially characterized employing different techniques, which indicated that the material is easy to separate, recover, and reuse for further application. Batch experiments were carried out to study biochar-aided PAH biodegradation by R. opacus clearly demonstrating its positive effect on PAH biodegradation and lipid accumulation by the bacterium utilizing the synthetic media containing 2-, 3- or 4-ring PAH compounds, at an initial concentration in the range 50-200 mg L-1, along with 10% (w/v) inoculum. An enhancement in PAH biodegradation from 79.6 to 92.3%, 76.1 to 90.5%, 74.1 to 88.2%, and 71.6 to 82.3% for naphthalene, anthracene, phenanthrene, and fluoranthene, respectively, were attained with a corresponding lipid accumulation of 68.1%, 74.2%, 72.4%, and 63% (w/w) of cell dry weight (CDW). From contact angle measurements carried out in the study, enhancement in PAH biodegradation and lipid accumulation due to the biochar was attributed to an improved bioavailability of PAH to the degrading bacterium.

Isomeric Carborane Neuromuscular Blocking Agents.

We synthesized a family of neuromuscular blocking agents (NMB) based on decamethonium, but containing a carborane cluster in the methylene chain between the two quaternary ammonium groups. The carborane cluster isomers o-NMB, m-NMB, and p-NMB were tested in animals for neuromuscular block and compared with agents used clinically: rocuronium and decamethonium. All three isomers caused reversible muscle weakness in mice as determined by grip strength and inverted screen tests, with a potency rank of p-NMB > rocuronium > decamethonium > m-NMB > o-NMB. The mechanism of action of the compounds was determined by using the in vitro rat phrenic nerve hemi-diaphragm preparation and electrophysiologic measurements in cells. Neostigmine reversed hemi-diaphragm weakness caused by the three isomers and rocuronium, but not succinylcholine. In electrophysiologic recordings of currents through acetylcholine receptor channels, the carborane compounds did not activate channel activity but did inhibit channel activation by acetylcholine. These results demonstrate that the carborane neuromuscular blocking agents are non-depolarizers in contrast to the depolarizing action of the parent compound.

A novel integrated biodegradation-microfiltration system for sustainable wastewater treatment and energy recovery.

This work assessed the treatment of wastewater generated from three different industries viz., paper and pulp, biomass gasification and dairy by biodegradation followed by membrane filtration. Batch biodegradation was first carried out using wastewater as the potential substrate for oleaginous Rhodococcus opacus with lipid accumulation intracellular; subsequently, a microfiltration system was applied to recover the bacterial biomass grown as well as for residual chemical oxygen demand (COD) removal from the effluent. The combined process showed excellent results in terms of COD removal from the industrial wastewaters, with the values 56.8%, 46.1% and 68.9% for dairy, paper and pulp and biomass gasification wastewaters, respectively, by biodegradation. These values were further improved to 92.7%, 87.6% and 88.2%, respectively, following the microfiltration step performed by employing a low-cost ceramic membrane. In addition, lipids accumulated by the bacterium were extracted and characterized for biodiesel production potential. Lipid characterization using 1H NMR confirmed the presence of saturated fatty acids. Gas chromatography analysis of the transesterified lipids revealed the presence of methyl palmitate and methyl stearate. In addition, the estimated properties of the transesterified product affirmed its potential for biofuel application.