Centrosymmetry-Breaking Morphotropic Phase Boundary: A Pathway to Highly Sensitive and Strong Pressure-Responsive Nonlinear Optical Switches.

The quest for high-performance piezoelectric materials has been synonymous with the pursuit of the morphotropic phase boundary (MPB), yet the full potential of MPBs remains largely untapped outside of the realm of ferroelectrics. In this study, we reveal a new class of MPB by creating continuous molecular-based solid solutions between centro- and noncentrosymmetric compounds, exemplified by (tert-butylammonium)1-x(tert-amylammonium)xFeCl4 (0 ≤ x ≤ 1), where the MPB is formed due to disorder of molecular cations. Near the MPB, we discovered an exceptionally sensitive nonlinear optical material in the centrosymmetric phase, capable of activation at pressures as low as 0.12-0.27 GPa, and producing tunable second-harmonic generation (SHG) signals from zero to 18.8 times that of KH2PO4 (KDP). Meanwhile, synchrotron diffraction experiments have unveiled a third competing phase (P212121) appearing at low pressure, forming a triple-phase point near the MPB, thereby providing insight into the mechanism underpinning the nonlinear optical (NLO) switch behavior. These findings highlight the opportunity to harness exceptional physical properties in symmetry-breaking solid solution systems by strategically designing novel MPBs.

The interface engineering and structure design of an alloying-type metal foil anode for lithium ion batteries: a review.

An alloying-type metal foil serves as an integrated anode that is distinct from the prevalent powder-casting production of lithium ion batteries (LIBs) and emerging lithium metal batteries (LMBs), and also its energy density and processing technology can be profoundly developed. However, besides their apparent intriguing advantages of a high specific capacity, electrical conductivity, and the ease of formation, metal foil anodes suffer from slow lithiation kinetics, a trade-off between specific capacity and cycle life, and a low initial Coulombic efficiency (ICE) owing to their multi-scaled structural geometry, huge volume change, and induced interfacial issues during the alloying process. In this review, we attempt to present a comprehensive overview on the recent research progress with respect to alloying-type metal foil anodes toward high-energy-density and low-cost LIBs. The failure mechanism of metal foil anodes during lithiation/delithiation and existing challenges are also summarized. Subsequently, the structural design and interface engineering strategies that have witnessed significant achievements are highlighted, which can promote the practical development of LIBs, including artificial SEI, alloying, structural design, and grain refinement. Furthermore, scientific perspectives are proposed to further improve the overall performance and decouple the complex mechanisms in terms of interdisciplinary fields of electrochemistry, metallic materials science, mechanics, and interfacial science, demonstrating that metal foil anode-based LIBs require more research efforts.

Atomically Unraveling Highly Crystalline Self-Intercalated Tantalum Sulfide with Correlated Stacking Registry-Dependent Magnetism.

In self-intercalated two-dimensional (ic-2D) materials, understanding the local chemical environment and the topology of the filling site remains elusive, and the subsequent correlation with the macroscopically manifested physical properties has rarely been investigated. Herein, highly crystalline gram-scale ic-2D Ta1.33S2 crystals were successfully grown by the high-pressure high-temperature method. Employing combined atomic-resolution scanning transmission electron microscopy annular dark field imaging and density functional theory calculations, we systematically unveiled the atomic structures of an atlas of stacking registries in a well-defined √3(a) × âˆš3(a) Ta1.33S2 superlattice. Ferromagnetic order was observed in the AC' stacking registry, and it evolves into an antiferromagnetic state in AA/AB/AB' stacking registries; the AA' stacking registry shows ferrimagnetic ordering. Therefore, we present a novel approach for fabricating large-scale highly crystalline ic-2D crystals and shed light on a powerful means of modulating the magnetic order of ic-2D systems via stacking engineering, i.e., stackingtronics.

Pressure-Induced Superconductivity and Topological Quantum Phase Transitions in the Topological Semimetal ZrTe2.

Topological transition metal dichalcogenides (TMDCs) have attracted much attention due to their potential applications in spintronics and quantum computations. In this work, the structural and electronic properties of topological TMDCs candidate ZrTe2 are systematically investigated under high pressure. A pressure-induced Lifshitz transition is evidenced by the change of charge carrier type as well as the Fermi surface. Superconductivity is observed at around 8.3 GPa without structural phase transition. A typical dome-shape phase diagram is obtained with the maximum Tc of 5.6 K for ZrTe2 . Furthermore, the theoretical calculations suggest the presence of multiple pressure-induced topological quantum phase transitions, which coexists with emergence of superconductivity. The results demonstrate that ZrTe2 with nontrivial topology of electronic states displays new ground states upon compression.

Manipulation of nonlinear optical responses in layered ferroelectric niobium oxide dihalides.

Realization of highly tunable second-order nonlinear optical responses, e.g., second-harmonic generation and bulk photovoltaic effect, is critical for developing modern optical and optoelectronic devices. Recently, the van der Waals niobium oxide dihalides are discovered to exhibit unusually large second-harmonic generation. However, the physical origin and possible tunability of nonlinear optical responses in these materials remain to be unclear. In this article, we reveal that the large second-harmonic generation in NbOX2 (X = Cl, Br, and I) may be partially contributed by the large band nesting effect in different Brillouin zone. Interestingly, the NbOCl2 can exhibit dramatically different strain-dependent bulk photovoltaic effect under different polarized light, originating from the light-polarization-dependent orbital transitions. Importantly, we achieve a reversible ferroelectric-to-antiferroelectric phase transition in NbOCl2 and a reversible ferroelectric-to-paraelectric phase transition in NbOI2 under a certain region of external pressure, accompanied by the greatly tunable nonlinear optical responses but with different microscopic mechanisms. Our study establishes the interesting external-field tunability of NbOX2 for nonlinear optical device applications.

Valley-dimensionality locking of superconductivity in cubic phosphides.

Two-dimensional superconductivity is primarily realized in atomically thin layers through extreme exfoliation, epitaxial growth, or interfacial gating. Apart from their technical challenges, these approaches lack sufficient control over the Fermiology of superconducting systems. Here, we offer a Fermiology-engineering approach, allowing us to desirably tune the coherence length of Cooper pairs and the dimensionality of superconducting states in arsenic phosphides AsxP1-x under hydrostatic pressure. We demonstrate how this turns these compounds into tunable two-dimensional superconductors with a dome-shaped phase diagram even in the bulk limit. This peculiar behavior is shown to result from an unconventional valley-dimensionality locking mechanism, driven by a delicate competition between three-dimensional hole-type and two-dimensional electron-type energy pockets spatially separated in momentum space. The resulting dimensionality crossover is further discussed to be systematically controllable by pressure and stoichiometry tuning. Our findings pave a unique way to realize and control superconducting phases with special pairing and dimensional orders.

An anisotropic van der Waals dielectric for symmetry engineering in functionalized heterointerfaces.

Van der Waals dielectrics are fundamental materials for condensed matter physics and advanced electronic applications. Most dielectrics host isotropic structures in crystalline or amorphous forms, and only a few studies have considered the role of anisotropic crystal symmetry in dielectrics as a delicate way to tune electronic properties of channel materials. Here, we demonstrate a layered anisotropic dielectric, SiP2, with non-symmorphic twofold-rotational C2 symmetry as a gate medium which can break the original threefold-rotational C3 symmetry of MoS2 to achieve unexpected linearly-polarized photoluminescence and anisotropic second harmonic generation at SiP2/MoS2 interfaces. In contrast to the isotropic behavior of pristine MoS2, a large conductance anisotropy with an anisotropy index up to 1000 can be achieved and modulated in SiP2-gated MoS2 transistors. Theoretical calculations reveal that the anisotropic moiré potential at such interfaces is responsible for the giant anisotropic conductance and optical response. Our results provide a strategy for generating exotic functionalities at dielectric/semiconductor interfaces via symmetry engineering.

Stability and Semiconducting Behavior of Magnesium Polysulfides by Nonequivalent sp3 Hybridizations.

The Mg/S battery has attracted enormous interest in recent years due to its high theoretical capacity, low cost, and high security. However, the understanding of many intermediate magnesium polysulfides in the Mg/S battery remains elusive. Combining extensive structural search and first-principles calculations, we investigate the phase stability, structural character, and electronic structure of magnesium polysulfides in a wide range from MgS to MgS8. The pyrite-type MgS2 (space group: Pa3̅) is predicted to be stable. Five magnesium polysulfides, MgSx (x = 3, 4, 5, 6, and 8), are found to be metastable, with formation enthalpies slightly above the convex hull. S2 dimer, "V"-like S3, and highly distorted Sx chains are found for the polysulfides with bond lengths close to or slightly longer than S8 and bond angles similar to S8. A wide range of band gaps (0.77-2.82 eV) are revealed for the polysulfides due to the contribution of the nonequivalent sp3 hybridization of the S atoms in Sx2-. Our results can help to further understand the electrochemical process in the Mg/S battery.

Pressure-Stabilized High-Entropy (FeCoNiCuRu)S2 Sulfide Anode toward Simultaneously Fast and Durable Lithium/Sodium Ion Storage.

Pressure-stabilized high-entropy sulfide (FeCoNiCuRu)S2 (HES) is proposed as an anode material for fast and long-term stable lithium/sodium storage performance (over 85% retention after 15 000 cycles @10 A g-1 ). Its superior electrochemical performance is strongly related to the increased electrical conductivity and slow diffusion characteristics of entropy-stabilized HES. The reversible conversion reaction mechanism, investigated by ex-situ XRD, XPS, TEM, and NMR, further confirms the stability of the host matrix of HES after the completion of the whole conversion process. A practical demonstration of assembled lithium/sodium capacitors also confirms the high energy/power density and long-term stability (retention of 92% over 15 000 cycles @5 A g-1 ) of this material. The findings point to a feasible high-pressure route to realize new high-entropy materials for optimized energy storage performance.

3D ordered amorphous and porous TiO2 framework anode with low insertion barrier and fast kinetics for K-ion hybrid capacitors.

TiO2 is considered as a low cost, long-term stable, and safe anode for high power K-ion hybrid capacitors (KICs) due to its abundant reserve, small volume expansion rate, and sloping voltage plateau that avoids K-ion plating at high voltage polarization. However, the enhancement of its low capacity and sluggish kinetics caused by poor electroconductivity and high insertion barrier is still challenging to further develop high-performance KICs. Herein, the reduced graphene oxide (rGO) is embedded in the walls of 3D ordered macro-/mesoporous TiO2 (termed as TiO2@rGO framework) to create intimate TiO2/rGO interfaces, ensuring the effectively electron transportation during potassiation/depotassiation of TiO2 while maintaining rapid ions/electrolyte diffusion. Furthermore, the controlled amorphous TiO2 framework can further lower the lattice insertion energies, contributing to a fast accommodation of K-ion. As expected, the amorphous TiO2@rGO framework (TiO2@rGO-1) exhibits a superior rate capability (148.8 mAh g-1 at 5 A g-1) and cycling stability (171.2 mAh g-1 at 1 A g-1 after 800 cycles). The assembled KICs can reach a high energy/power density of 125.2 Wh kg-1/4267.4 W kg-1 as well as a long-term lifespan. This tactic provides a reliable and general way to design a TiO2-based anode with fast kinetics toward high-performance KICs.

Ultrathin quantum light source with van der Waals NbOCl2 crystal.

Interlayer electronic coupling in two-dimensional materials enables tunable and emergent properties by stacking engineering. However, it also results in significant evolution of electronic structures and attenuation of excitonic effects in two-dimensional semiconductors as exemplified by quickly degrading excitonic photoluminescence and optical nonlinearities in transition metal dichalcogenides when monolayers are stacked into van der Waals structures. Here we report a van der Waals crystal, niobium oxide dichloride (NbOCl2), featuring vanishing interlayer electronic coupling and monolayer-like excitonic behaviour in the bulk form, along with a scalable second-harmonic generation intensity of up to three orders higher than that in monolayer WS2. Notably, the strong second-order nonlinearity enables correlated parametric photon pair generation, through a spontaneous parametric down-conversion (SPDC) process, in flakes as thin as about 46 nm. To our knowledge, this is the first SPDC source unambiguously demonstrated in two-dimensional layered materials, and the thinnest SPDC source ever reported. Our work opens an avenue towards developing van der Waals material-based ultracompact on-chip SPDC sources as well as high-performance photon modulators in both classical and quantum optical technologies1-4.

Superatomic-Charge-Density-Wave in Cluster-Assembled Au6Te12Se8 Superconductors.

Superatomic crystals are a class of hierarchical materials composed of atomically precise clusters assembled via van der Waals or covalent-like interactions. Au6Te12Se8, an all-inorganic superatomic superconductor exhibiting superatomic-charge-density-wave (S-CDW), provides the first platform to study the response of its collective quantum phenomenon to the external pressure in superatomic crystals. We reveal a competition between S-CDW and superconductivity in an ultra-narrow pressure range. Distinct from conventional CDW ordering, S-CDW shows the lowest threshold (0.1 GPa) toward external pressure that is 1-2 orders of magnitude lower than other atomic compounds. Prominently, a second superconducting phase emerges above 7.3 GPa with a threefold enhancement in the transition temperature (Tc) to 8.5 K, indicating a switch of the conduction channel from the a- to b-axis. In situ synchrotron diffractions and theoretical calculations reveal a pressure-mediated mesoscopic slip of the superatoms and a 2D-3D transition of the Fermi surface topology, which well explains the observed dimensional crossover of conductivity and re-entrant superconductivity.

Inference of a "Hot Ice" Layer in Nitrogen-Rich Planets: Demixing the Phase Diagram and Phase Composition for Variable Concentration Helium-Nitrogen Mixtures Based on Isothermal Compression.

Van der Waals (vdW) chemistry in simple molecular systems may be important for understanding the structure and properties of the interiors of the outer planets and their satellites, where pressures are high and such components may be abundant. In the current study, Raman spectra and visual observation are employed to investigate the phase separation and composition determination for helium-nitrogen mixtures with helium concentrations from 20 to 95% along the 295 K isothermal compression. Fluid-fluid-solid triple-phase equilibrium and several equilibria of two phases including fluid-fluid and fluid-solid have been observed in different helium-nitrogen mixtures upon loading or unloading pressure. The homogeneous fluid in helium-nitrogen mixtures separates into a helium-rich fluid (F1) and a nitrogen-rich fluid (F2) with increasing pressure. The triple-phase point occurs at 295 K and 8.8 GPa for a solid-phase (N2)11He vdW compound, fluid F1 with around 50% helium, and fluid F2 with 95% helium. Helium concentrations of F1 coexisted with the (N2)11He vdW compound or δ-N2 in helium-nitrogen mixtures with different helium concentrations between 40 and 50% and between 20 and 40%, respectively. In addition, the helium concentration of F2 is the same in helium-nitrogen mixtures with different helium concentrations and decreases upon loading pressure. Pressure-induced nitrogen molecule ordering at 32.6 GPa and a structural phase transition at 110 GPa are observed in (N2)11He. In addition, at 187 GPa, a pressure-induced transition to an amorphous state is identified.

Unconventional excitonic states with phonon sidebands in layered silicon diphosphide.

Complex correlated states emerging from many-body interactions between quasiparticles (electrons, excitons and phonons) are at the core of condensed matter physics and material science. In low-dimensional materials, quantum confinement affects the electronic, and subsequently, optical properties for these correlated states. Here, by combining photoluminescence, optical reflection measurements and ab initio theoretical calculations, we demonstrate an unconventional excitonic state and its bound phonon sideband in layered silicon diphosphide (SiP2), where the bound electron-hole pair is composed of electrons confined within one-dimensional phosphorus-phosphorus chains and holes extended in two-dimensional SiP2 layers. The excitonic state and emergent phonon sideband show linear dichroism and large energy redshifts with increasing temperature. Our ab initio many-body calculations confirm that the observed phonon sideband results from the correlated interaction between excitons and optical phonons. With these results, we propose layered SiP2 as a platform for the study of excitonic physics and many-particle effects.

Structure Determination, Mechanical Properties, Thermal Stability of Co2MoB4 and Fe2MoB4.

The precise determination of atomic position of materials is critical for understanding the relationship between structure and properties, especially for compounds with light elements of boron and single or multiple transition metals. In this work, the single crystal X-ray diffraction is employed to analyze the atomic positions of Co2MoB4 and Fe2MoB4 with a Ta3B4-type structure, and it is found that the lengths of B-B bonds connecting the two zig-zag boron chains are 1.86 Å and 1.87 Å, but previously unreported 1.4 Å. Co and Fe atoms occupy the same crystallographic position in lattice for the doped samples and the valence is close to the metal itself, and Co/Fe K-edge X-ray Absorption Fine Structure(XAFS) spectra of borides with different ratios of Co to Fe are collected to detect the local environment and chemical valence of Co and Fe. Vickers hardness and nano indentation measurements are performed, together with the Density Functional Theory (DFT) calculations. Finally, Co2MoB4 possess better thermal stability than Fe2MoB4 evaluated by Thermogravimetric Differential Thermal Analysis (TG-DTA) results.

A universal synthesis of MOF-Hydroxyl for highly active oxygen evolution.

Since of their adjustable pore structure and variety of metal sites, MOFs materials have infinite possibilities, but their low intrinsic activity hinders them from being employed in electrolytic water. The sulfurization and oxidation of MOFs has proven to be a feasible technique for producing highly active catalytic materials. Here, the MOFs are completely converted to hydroxide by treatment with alkaline solutions only. Electron microscopy demonstrates that hydroxides generated from various MOFs retain the complete profile of the precursor and contain a two-dimensional lamellar or mesoporous structure. Fe-MIL-88(A)-OH, a two-dimensional structural transformation product generated from Fe-MIL-88(A), demonstrates significant OER performance increase. At the same 300 mV overpotential, Fe-MIL-88(A)-OH delivers 83 times the current density of Fe-MIL-88(A) and 16 times that of commercial IrO2 (22.56 mA cm-2 vs. 0.27 mA cm-2 vs. 1.37 mA cm-2). The alkali treatment strategy proved to be a generally applicable treatment for MOFs, allowing the conversion of nickel- and cobalt-based MOFs to hydroxide with a significant boost in OER performance.

Disproportionation of SO_{2} at High Pressure and Temperature.

Materials once suffered at high-pressure and high-temperature (HPHT) conditions often exhibit exotic phenomena that defy conventional wisdom. The behaviors of sulfur dioxide (SO_{2}), one of the archetypal simple molecules, at HPHT conditions have attracted a great deal of attention due to its relevance to the S cycle between deep Earth and the atmosphere. Here we report the discovery of an unexpected disproportionation of SO_{2} via bond breaking into elemental S and sulfur trioxide (SO_{3}) at HPHT conditions through a jointly experimental and theoretical study. Measured x-ray diffraction and Raman spectroscopy data allow us to solve unambiguously the crystal structure (space group R3[over ¯]c) of the resultant SO_{3} phase that shows an extended framework structure formed by vertex-sharing octahedra SO_{6}. Our findings lead to a significant extension of the phase diagram of SO_{2} and suggest that SO_{2}, despite its abundance in Earth's atmosphere and ubiquity in other giant planets, is not a stable compound at HPHT conditions relevant to planetary interiors, providing important implications for elucidating the S chemistry in deep Earth and other giant planets.

Emergent Fabry-Pérot Interference for Light-Matter Interaction in van der Waals WS2/SiP2 Heterostructures.

Fabry-Pérot interference plays an important role in modulating the spectral intensity of optical response originating from light-matter interactions. Examples of such interference occurring in the substrate as the resonating cavity have been demonstrated and probed by two-dimensional layered materials. Similarly, the Fabry-Pérot interference can occur and modulate the optical response in the heterostructure; however, this remains elusive. Herein, we observe the Fabry-Pérot interference on photoluminescence (PL) and Raman spectra in monolayer WS2/SiP2 heterostructures by varying the thickness of bottom SiP2 from 2 to 193 nm, which serves as the Fabry-Pérot cavity. Both the intensities of the PL spectra and the E2g1 Raman mode of WS2/SiP2 heterostructures first decrease to almost zero while displaying an interference increase at a SiP2 thickness of 75 nm. Our findings clearly demonstrate the Fabry-Pérot interference in the optical response of heterostructures, providing crucial information to optimize the optical response and paving the way toward photodetector applications.