Combined Precursor Engineering and Grain Anchoring Leading to MA-Free, Phase-Pure, and Stable α-Formamidinium Lead Iodide Perovskites for Efficient Solar Cells.

α-Formamidinium lead iodide (α-FAPbI3 ) is one of the most promising candidate materials for high-efficiency and thermally stable perovskite solar cells (PSCs) owing to its outstanding optoelectrical properties and high thermal stability. However, achieving a stable form of α-FAPbI3 where both the composition and the phase are pure is very challenging. Herein, we report on a combined strategy of precursor engineering and grain anchoring to successfully prepare methylammonium (MA)-free and phase-pure stable α-FAPbI3 films. The incorporation of volatile FA-based additives in the precursor solutions completely suppresses the formation of non-perovskite δ-FAPbI3 during film crystallization. Grains of the desired α-phase are anchored together and stabilized when 4-tert-butylbenzylammonium iodide is permeated into the α-FAPbI3 film interior via grain boundaries. This cooperative scheme leads to a significantly increased efficiency close to 21 % for FAPbI3 perovskite solar cells. Moreover, the stabilized PSCs exhibit improved thermal stability and maintained ≈90 % of their initial efficiency after storage at 50 °C for over 1600 hours.

Black phosphorus quantum dots in inorganic perovskite thin films for efficient photovoltaic application.

Black phosphorus quantum dots (BPQDs) are proposed as effective seed-like sites to modulate the nucleation and growth of CsPbI2Br perovskite crystalline thin layers, allowing an enhanced crystallization and remarkable morphological improvement. We reveal that the lone-pair electrons of BPQDs can induce strong binding between molecules of the CsPbI2Br precursor solution and phosphorus atoms stemming from the concomitant reduction in coulombic repulsion. The four-phase transition during the annealing process yields an α-phase CsPbI2Br stabilized by BPQDs. The BPQDS/CsPbI2Br core-shell structure concomitantly reinforces a stable CsPbI2Br crystallite and suppresses the oxidation of BPQDs. Consequently, a power conversion efficiency of 15.47% can be achieved for 0.7 wt % BPQDs embedded in CsPbI2Br film-based devices, with an enhanced cell stability, under ambient conditions. Our finding is a decisive step in the exploration of crystallization and phase stability that can lead to the realization of efficient and stable inorganic perovskite solar cells.

Highly Efficient Perovskite Solar Cells with Gradient Bilayer Electron Transport Materials.

Electron transport layers (ETLs) with suitable energy level alignment for facilitating charge carrier transport as well as electron extraction are essential for planar heterojunction perovskite solar cells (PSCs) to achieve high open-circuit voltage ( VOC) and short-circuit current. Herein we systematically investigate band offset between ETL and perovskite absorber by tuning F doping level in SnO2 nanocrystal. We demonstrate that gradual substitution of F- into the SnO2 ETL can effectively reduce the band offset and result in a substantial increase in device VOC. Consequently, a power conversion efficiency of 20.2% with VOC of 1.13 V can be achieved under AM 1.5 G illumination for planar heterojunction PSCs using F-doped SnO2 bilayer ETL. Our finding provides a simple pathway to tailor ETL/perovskite band offset to increase built-in electric field of planar heterojunction PSCs for maximizing VOC and charge collection simultaneously.

Long-Range π-Conjugation in Phenothiazine-containing Donor-Acceptor Dyes for Application in Dye-Sensitized Solar Cells.

Four organic donor-π-bridge-acceptor dyes containing phenothiazine as a spacer and cyanoacrylic acid as an acceptor were synthesized and tested as sensitizers in dye-sensitized solar cells (DSCs). The influence of iodide- and cobalt-based redox electrolytes on the photovoltaic device performance was investigated. In these new dyes, systematic π-conjugation was extended by inserting one or two phenothiazine moieties and investigated within the context of the resulting photoinduced charge-transfer properties. A detailed investigation, including transient absorption spectroscopy and quantum chemical methods, provided important information on the role of extended π-conjugation on the photophysical properties and photovoltaic device performance. Overall, the results showed that the extension of π-conjugation by one phenothiazine unit resulted in the best device performance owing to reduced recombination rates, whereas extension by two phenothiazine units reduced dye adsorption on TiO2 probably owing to the increase in molecular size. The performance of the dyes in DSCs was found to be a complex interaction between dye structure and size.

Loading of mesoporous titania films by CH3NH3PbI3 perovskite, single step vs. sequential deposition.

Infiltration of mesoporous TiO2 scaffolds by CH3NH3PbI3 is more complete when using sequential compared to single step deposition processing and avoids formation of disordered capping layers affording greatly improved performance of perovskite based photovoltaics.

Highly efficient light-harvesting ruthenium sensitizer for thin-film dye-sensitized solar cells.

A high molar extinction coefficient heteroleptic ruthenium complex, incorporating an electron-rich hexylthio-terminal chain, has been synthesized and demonstrated as an efficient sensitizer for dye-sensitized solar cells. With this new sensitizer excellent power conversion efficiency is 11.5% and 4.7% obtained under an irradiation of full sunlight (air mass 1.5 global) in combination with a volatility electrolyte and solid state hole transporting material, respectively. The devices with low volatility electrolyte showed good stability under visible-light soaking at 60 degrees C during 1000 h of accelerated tests.