Cannabidiol-loaded microparticles embedded in a porous hydrogel matrix for biomedical applications.

In this study, poly (lactic-co-glycolic acid) (PLGA) microparticles loaded with cannabidiol (CBD) were synthesized (PLGA@CBD microparticles) and embedded up to 10 wt% in a chondroitin sulfate/polyvinyl alcohol hydrogel matrix. In vitro chemical, physical, and biological assays were carried out to validate the potential use of the modified hydrogels as biomaterials. The microparticles had spherical morphology and a narrow range of size distribution. CBD encapsulation efficiency was around 52%, loading was approximately 50%. Microparticle addition to the hydrogels caused minor changes in their morphology, FTIR and thermal analyses confirmed these changes. Swelling degree and total porosity were reduced in the presence of microparticles, but similar hydrophilic and degradation in phosphate buffer solution behaviors were observed by all hydrogels. Rupture force and maximum strain at rupture were higher in the modified hydrogels, whereas modulus of elasticity was similar across all materials. Viability of primary human dental pulp cells up to 21 days was generally not influenced by the addition of PLGA@CBD microparticles. The control hydrogel showed no antimicrobial activity against Staphylococcus aureus, whereas hydrogels with 5% and 10% PLGA@CBD microparticles showed inhibition zones. In conclusion, the PLGA@CBD microparticles were fabricated and successfully embedded in a hydrogel matrix. Despite the hydrophobic nature of CBD, the physicochemical and morphological properties were generally similar for the hydrogels with and without the CBD-loaded microparticles. The data reported in this study suggested that this original biomaterial loaded with CBD oil has characteristics that could enable it to be used as a scaffold for tissue/cellular regeneration.

In vitro characterization of a novel resin-based restorative material containing alkaline fillers.

OBJECTIVE: In this study, a comparative evaluation of the physicochemical properties of Cention N and other direct restorative materials was performed. Three restorative materials-a resin-modified glass ionomer (Fuji II LC), an alkasite-based resinous material (Cention N), and a resin composite (Tetric N Ceram)-were characterized in terms of degree of conversion, Knoop hardness number (KHN) ratio, flexural strength, elastic modulus, water sorption, water solubility, microshear bond strength to dentin, immediate microleakage, and radiopacity. METHODOLOGY: The microshear bond strength to dentin and microleakage of Cention N were evaluated with and without the application of an adhesive system (Tetric N Bond Universal). A one-way ANOVA test was used to analyze the data in terms of degree of conversion, KHN ratio, water sorption, water solubility, microshear bond strength to dentin, and radiopacity. A two-way ANOVA test (carried out considering the material type and ethanol aging as factors) was used to analyze the data in terms of flexural strength and elastic modulus. The Kruskal-Wallis test was used to statistically analyze the data on microleakage. A significance level of α=0.05 was used for all tests. RESULTS: Fuji II LC was found to have the highest degree of conversion, water sorption, and microleakage, as well as the lowest flexural strength. Cention N had the highest solubility; when used with an adhesive system, it achieved bond strength and microleakage similar to those of the Tetric N Ceram composite. Tetric N Ceram had the highest degree of conversion, KHN ratio, and radiopacity. Conclusion: The properties of Cention N validate its efficacy as an alternative direct restorative material when used in conjunction with an adhesive system.

In vitro characterization of a novel resin-based restorative material containing alkaline fillers

Abstract Objective: In this study, a comparative evaluation of the physicochemical properties of Cention N and other direct restorative materials was performed. Three restorative materials—a resin-modified glass ionomer (Fuji II LC), an alkasite-based resinous material (Cention N), and a resin composite (Tetric N Ceram)—were characterized in terms of degree of conversion, Knoop hardness number (KHN) ratio, flexural strength, elastic modulus, water sorption, water solubility, microshear bond strength to dentin, immediate microleakage, and radiopacity. Methodology: The microshear bond strength to dentin and microleakage of Cention N were evaluated with and without the application of an adhesive system (Tetric N Bond Universal). A one-way ANOVA test was used to analyze the data in terms of degree of conversion, KHN ratio, water sorption, water solubility, microshear bond strength to dentin, and radiopacity. A two-way ANOVA test (carried out considering the material type and ethanol aging as factors) was used to analyze the data in terms of flexural strength and elastic modulus. The Kruskal-Wallis test was used to statistically analyze the data on microleakage. A significance level of α=0.05 was used for all tests. Results: Fuji II LC was found to have the highest degree of conversion, water sorption, and microleakage, as well as the lowest flexural strength. Cention N had the highest solubility; when used with an adhesive system, it achieved bond strength and microleakage similar to those of the Tetric N Ceram composite. Tetric N Ceram had the highest degree of conversion, KHN ratio, and radiopacity. Conclusion: The properties of Cention N validate its efficacy as an alternative direct restorative material when used in conjunction with an adhesive system.

Resistencia de unión al cizallamiento de diferentes agentes de fijación a aleaciones metálicas odontológicas / Shear bond strength of different bonding agents to dental metal alloys

Introducción: La fijación de las restauraciones indirectas es uno de los pasos más importantes, para conseguir una adecuada retención y sellado de la interfase entre el material restaurador y el diente. Objetivo: Evaluar la resistencia de unión al cizallamiento de diferentes agentes de fijación a dos aleaciones metálicas utilizadas en odontología. Métodos: Estudio experimental in vitro. Cien especímenes de aleaciones de metales base, 50 de níquel-cromo y 50 de níquel-cromo-titanio fueron preparados y divididos de manera aleatoria en 5 grupos. Esta división se realizó acorde con el agente de fijación utilizado: sistema autograbante de dos pasos (Clearfil SE Bond; CSB), sistema adhesivo universal (Single Bond Universal; SBU), cemento resinoso autoadhesivo (Maxcem Elite; ME), ionómero de vidrio (IV) y fosfato de zinc (ZnPO). Posteriormente a la aplicación de cada agente de fijación, los especímenes tratados fueron almacenados en agua destilada por 24 h a 37 ºC y sometidos a un ensayo de resistencia de unión al cizallamiento. Resultados: La resistencia de unión al cizallamiento fue influenciada significativamente por el tipo de agente de fijación (p = 0,002) y el tipo de aleación utilizada (p < 0,001). La resistencia de unión al cizallamiento fue mayor, al utilizar el sistema Clearfil SE Bond, seguida de Single Bond Universal; las diferencias entre Maxcem Elite y el Fosfato de zinc no fueron significativas. Finalmente, el IV no mostró adhesión a ninguna de las aleaciones metálicas utilizadas. Conclusiones: El uso de Clearfil SE Bond aumentó la resistencia de unión de los cementos resinosos a las aleaciones metálicas(AU)

Introduction: The bonding of indirect restorations is one of the most important steps, in order to achieve adequate retention and sealing of the interface between the restorative material and the tooth. Objective: To evaluate the shear bond strength of different bonding agents to two metal alloys used in dentistry. Methods: In vitro experimental study. One hundred specimens of base metal alloys, 50 nickel-chromium and 50 nickel-chromium-titanium were prepared and randomly divided into 5 groups. This division was made according to the bonding agent used: two-step self-etching system (Clearfil SE Bond; CSB), universal adhesive system (Single Bond Universal; SBU), self-adhesive resin cement (Maxcem Elite; ME), glass ionomer (IV) and zinc phosphate (ZnPO). After the application of each bonding agent, the treated specimens were stored in distilled water for 24 hr at 37 ºC and subjected to a shear bond strength test. Results: Shear bond strength was significantly influenced by the type of bonding agent (p = 0.002) and the type of alloy used (p < 0.001). Shear bond strength was highest when using the Clearfil SE Bond system, followed by Single Bond Universal; the differences between Maxcem Elite and Zinc Phosphate were not significant. Finally, IV did not show adhesion to any of the metal alloys used. Conclusions: The use of Clearfil SE Bond increased the bond strength of resinous cements to metallic alloys(AU)

Decálogo de buenas prácticas para el uso y mantenimiento de las Unidades de Fotocurado LEDs

Actualmente varios biomateriales restauradores resinosos endurecen mediante una reacción de fotopolimerización, para lo cual es necesaria una unidad de polimerización (UP). El objetivo de este manuscrito es generar una guía basada en la evidencia científica actual para contribuir al correcto uso de las UP. Se realizó una búsqueda de artículos publicados desde el año 2002 hasta enero del 2022 a través de PubMed y Google Scholar. Se organizó la información en 10 tópicos de relevancia en forma de decálogo: longitud de onda, intensidad de la luz, diámetro de la punta, tiempo de curado, modo de curado, distancia de curado, uso de barreras, batería y carga, limpieza y desinfección, finalizando con los controles periódicos. Los profesionales de la salud deben conocer y recordar la importancia de realizar un adecuado uso y mantenimiento de las UP, ya que esto puede influir en el desempeño clínico de los biomateriales.

Atualmente, diversos biomateriais restauradores resinosos endurecem através de uma reação de fotopolimerização, para a qual é necessária uma unidade de polimerização (UP). O objetivo deste manuscrito é gerar um guia baseado em evidências científicas atuais para o uso correto de UPs. Foi feita uma busca por artigos publicados de 2002 a janeiro de 2022 por meio do PubMed e Google Scholar. As informações foram organizadas em 10 tópicos relevantes na forma de um decálogo: comprimento de onda, intensidade da luz, diâmetro da ponta, tempo de cura, modo de cura, distância de cura, uso de barreiras, bateria e carregamento, limpeza e desinfecção e verificações regulares. Os profissionais de saúde devem conhecer e lembrar a importância do uso e manutenção adequados das UPs, pois isso pode influenciar no desempenho clínico do biomaterial.

Efecto de la intensidad de las unidades de fotopolimerización sobre la biocompatibilidad y resistencia a la flexión de una resina compuesta

Objetivo: Determinar el efecto de la intensidad de dos unidades de fotopolimerización sobre la biocompatibilidad, resistencia flexural y módulo elástico de una resina compuesta. Metodología: Se crearon dos grupos de resina compuesta Filtek Z250XT cada uno fotopolimerizado con intensidades diferentes (800 mW/cm2 por 20s). La viabilidad celular fue analizada mediante ensayo de MTT a las 24 y 48 horas siguiendo la normativa ISO 10993-5. La resistencia flexural y módulo elástico fueron analizadas siguiendo la normativa ISO 4049. Resultados: En el grupo fotopolimerizado con una intensidad <400 mW/cm2, la citotoxicidad fue estadísticamente mayor tanto a las 24 como a las 48 horas y la resistencia flexural y módulo elástico fueron estadísticamente menores Conclusión: Una intensidad de polimerización <400 mW/cm2, aumenta los niveles de citotoxicidad y disminuye las propiedades mecánicas de las resinas compuestas. Se destaca la importancia del control periódico de las unidades de fotopolimerización.

Objetivo: Determinar o efeito da intensidade de duas unidades de fotopolimerização na biocompatibilidade, resistência à flexão e módulo de elasticidade de uma resina composta. Metodologia: Foram fabricados dois grupos de resina composta Filtek Z250XT, cada um deles foi fotopolimerizado com intensidades diferentes ( 800 mW/cm2 por 20s). A viabilidade celular foi analisada por ensaio de MTT em 24 e 48 horas seguindo a norma ISO 10993-5. A resistência à flexão e o módulo de elasticidade foram analisados ​​seguindo a norma ISO 4049. Resultados: No grupo fotopolimerizado com intensidade <400mW/cm2, a citotoxicidade foi estatisticamente maior nas 24 e 48 horas e a resistência à flexão e o módulo de elasticidade foram estatisticamente menores. Conclusão: Uma intensidade de polimerização <400 mW/cm2 aumenta os níveis de citotoxicidade e diminui as propriedades mecânicas das resinas compostas. Destaca-se a importância do controle periódico das unidades de fotopolimerização.

Objective: To determine the effect of the intensity of two light curing units on the biocompatibility, flexural strength and elastic modulus of a composite resin. Methodology: Two groups of Filtek Z250XT (3M ESPE) composite resin were created, each one photopolymerized using different intensities ( 800 mW/cm2 for 20s). Cell viability was analyzed by MTT assay at 24 and 48 hours following the ISO 10993-5 standard. The flexural strength and elastic modulus were analyzed following the ISO 4049 standard. Results: In the group photopolymerized with an intensity <400 mW/cm2, cytotoxicity was statistically higher both at 24 and 48 hours and flexural strength and elastic modulus were statistically lower. Conclusion: A polymerization intensity <400 mW/cm2 increases the levels of cytotoxicity and decreases the mechanical properties of composite resins. The importance of the periodic control of the light curing units is emphasized.

Evaluation of irradiance and radiant exposure on the polymerization and mechanical properties of a resin composite.

The objective of the present study was to evaluate the effect of irradiance and radiant exposure on the chemical-mechanical properties of a resin composite. A micro-hybrid resin composite (Clearfil AP-X, Kuraray) was investigated under two different irradiances: low (300 mW/cm2) and high (800 mW/cm2) and radiant exposures: 8 and 16 J/cm2. Four groups, named Low 8 J/cm2, High 8 J/cm2, Low 16 J/cm2, and High 16 J/cm2 were tested, and their flexural strengths, elastic moduli, depths of cure, and degrees of conversion were evaluated. Data were analyzed using two-way ANOVA and Tukey's test. A multiple linear regression model was used to correlate the irradiance and radiant exposure with dependent variables (α = 0.05). Irradiance and radiant exposure were found statistically significant for all dependent variables. The interaction between the factors was statistically significant only for the degree of conversion and elastic modulus. Group Low 16 J/cm2 exhibited a significantly superior performance in all the evaluated properties. Barring the degree of conversion, no significant differences were observed among the properties evaluated between the Low 8 J/cm2 and High 8 J/cm2 groups. The adjusted R2 values were high for the depth of cure and degree of conversion (0.58 and 0.96, respectively). Both irradiance and radiant exposure parameters play an important role in establishing the final properties of a micro-hybrid resin composite. Irradiance has a greater influence under higher radiant exposures.

A multi-country survey on the impact of COVID-19 on dental practice and dentists' feelings in Latin America.

BACKGROUND: The COVID-19 pandemic has significantly influenced the routine of healthcare workers. This study investigated the impact of the pandemic on dental practice and dentists' feelings in Latin America. METHODS: A survey was conducted with dentists from 11 Spanish-speaking Latin American countries in September-December 2020. Professionals were invited by email and via an open campaign promoted on social media. The questions investigated dental care routines, practice changes, and feelings about the pandemic. Descriptive statistics were used to identify frequencies and distributions of variables. Proportions were compared using chi-square tests. RESULTS: A total of 2127 responses were collected from a sample with diverse demographic, sex, work, and education characteristics. The impact of COVID-19 was considered high/very high by 60% of respondents. The volume of patients assisted weekly was lower compared with the pre-pandemic period (mean reduction = 14 ± 15 patients). A high rate of fear to contracting the COVID-19 at work was observed (85%); 4.9% of participants had a positive COVID-19 test. The main professional challenges faced by respondents were reduction in the number of patients or financial gain (35%), fear of contracting COVID-19 (34%), and burden with or difficulty in purchasing new personal protective equipment (22%). The fear to contracting COVID-19 was influenced by the number of weekly appointments. A positive test by the dentists was associated with their reports of having assisted COVID-19 patients. The most cited feelings about the pandemic were uncertainty, fear, worry, anxiety, and stress. Negative feelings were more prevalent for professionals who did not receive training for COVID-19 preventive measures and those reporting higher levels of fear to contract the disease. CONCLUSION: This multi-country survey indicated a high impact of the pandemic on dental care routines in Latin America. A massive prevalence of bad feelings was associated with the pandemic.

Evaluation of irradiance and radiant exposure on the polymerization and mechanical properties of a resin composite

Abstract The objective of the present study was to evaluate the effect of irradiance and radiant exposure on the chemical-mechanical properties of a resin composite. A micro-hybrid resin composite (Clearfil AP-X, Kuraray) was investigated under two different irradiances: low (300 mW/cm2) and high (800 mW/cm2) and radiant exposures: 8 and 16 J/cm2. Four groups, named Low 8 J/cm2, High 8 J/cm2, Low 16 J/cm2, and High 16 J/cm2 were tested, and their flexural strengths, elastic moduli, depths of cure, and degrees of conversion were evaluated. Data were analyzed using two-way ANOVA and Tukey's test. A multiple linear regression model was used to correlate the irradiance and radiant exposure with dependent variables (α = 0.05). Irradiance and radiant exposure were found statistically significant for all dependent variables. The interaction between the factors was statistically significant only for the degree of conversion and elastic modulus. Group Low 16 J/cm2 exhibited a significantly superior performance in all the evaluated properties. Barring the degree of conversion, no significant differences were observed among the properties evaluated between the Low 8 J/cm2 and High 8 J/cm2 groups. The adjusted R2 values were high for the depth of cure and degree of conversion (0.58 and 0.96, respectively). Both irradiance and radiant exposure parameters play an important role in establishing the final properties of a micro-hybrid resin composite. Irradiance has a greater influence under higher radiant exposures.

Residual Adhesive Removal Methods for Rebonding of Debonded Orthodontic Metal Brackets: Systematic Review and Meta-Analysis.

Debonding of orthodontic brackets is a common occurrence during orthodontic treatment. Therefore, the best option for treating debonded brackets should be indicated. This study aimed to evaluate the bond strength of rebonded brackets after different residual adhesive removal methods. This systematic review and meta-analysis was conducted according to the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) statement. PubMed, Web of Science, The Cochrane Library, SciELO, Scopus, LILACS, IBECS, and BVS databases were screened up to December 2020. Bond strength comparisons were made considering the method used for removing the residual adhesive on the bracket base. A total of 12 studies were included for the meta-analysis. Four different adhesive removal methods were identified: sandblasting, laser, mechanical grinding, and direct flame. When compared with new orthodontic metallic brackets, bond strength of debonded brackets after air abrasion (p = 0.006), mechanical grinding (p = 0.007), and direct flame (p < 0.001) was significantly lower. The use of an erbium-doped yttrium aluminum garnet (Er:YAG) laser showed similar shear bond strength (SBS) values when compared with those of new orthodontic brackets (p = 0.71). The Er:YAG laser could be considered an optimal method for promoting the bond of debonded orthodontic brackets. Direct flame, mechanical grinding, or sandblasting are also suitable, obtaining clinically acceptable bond strength values.

Physicochemical characterization of two bulk fill composites at different depths.

OBJECTIVES: This study analyzed the physical-chemical behavior of 2 bulk fill resin composites (BFCs; Filtek Bulk Fill [FBF], and Tetric-N-Ceram Bulk Fill [TBF]) used in 2- and 4-mm increments and compared them with a conventional resin composite (Filtek Z250). MATERIALS AND METHODS: Flexural strength and elastic modulus were evaluated by using a 3-point bending test. Knoop hardness was measured at depth areas 0-1, 1-2, 2-3, and 3-4 mm. The translucency parameter was measured using an optical spectrophotometer. Real-time polymerization kinetics was analyzed using Fourier transform infrared spectroscopy. RESULTS: Flexural strength was similar among the materials, while TBF showed lower elastic modulus (Z250: 6.6 ± 1.3, FBF: 6.4 ± 0.9, TBF: 4.3 ± 1.3). The hardness of Z250 was similar only between 0-1 mm and 1-2 mm. Both BFCs had similar hardness until 2-3 mm, and showed significant decreases at 3-4 mm (FBF: 33.45 ± 1.95 at 0-1 mm to 23.19 ± 4.32 at 3-4 mm, TBF: 23.17 ± 2.51 at 0-1 mm to 15.11 ± 1.94 at 3-4 mm). The BFCs showed higher translucency than Z250. The polymerization kinetics of all the materials were similar at 2-mm increments. At 4-mm, only TBF had a similar degree of conversion compared with 2 mm. CONCLUSIONS: The BFCs tested had similar performance compared to the conventional composite when used in up to 2-mm increments. When the increment was thicker, the BFCs were properly polymerized only up to 3 mm.

Flexural properties and color stability of indirect aesthetic restorative materials. / Propiedades flexurales y estabilidad de color de materiales restauradores estéticos indirectos. / Propriedades de flexão e estabilidade de cor de materiais restauradores estéticos indiretos

Introduction. The differences in the mechanical properties of ceramic and resin-based materials raise the question of which material can perform better in the long run. Objectives. Evaluate the flexural strength and color stability of different indirect aesthetic restorative materials. Methods. The selected materials were Filtek™ Z250 XT (3M ESPE), Ceramage (SHOFU Dental), VITA VM®LC y VITA ENAMIC® (VITA Zahnfabrik), IPS e.max® (Ivoclar-Vivadent) y Zolid FX (Amann Girrbach AG). The Flexural Strength test (n = 10) was carried out, using a mechanical testing machine. Color readings (n = 5) were measured using a VITA Easyshade V® spectrophotometer. Results. All ceramic materials showed better mechanical performance (p< 0,001). The color stability results show that Ceramage, IPS e.max® and Zolid FX, showed a statistically significant difference (p ≤ 0.002) with Filtek Z250 XT, VITA VM®LC and VITA ENAMIC®. Conclusions. Some indirect aesthetic materials with polymers in their composition are presented as a valid alternative for indirect restorations, presenting acceptable mechanical performance and colorimetric stability.

Introducción: Las diferencias en las propiedades mecánicas de los materiales cerámicos y a base de resina plantean la interrogante de qué material puede tener un mejor desempeño a largo plazo. Objetivos. Evaluar la resistencia flexural y estabilidad de color de diferentes materiales restauradores estéticos indirectos. Métodos. Los materiales seleccionados fueron Filtek™ Z250 XT (3M ESPE), Ceramage (SHOFU Dental), VITA VM®LC y VITA ENAMIC® (VITA Zahnfabrik), IPS e.max® (Ivoclar-Vivadent) y Zolid FX (Amann Girrbach AG). El ensayo de Resistencia Flexural (n=10) fue realizado en  una máquina universal de ensayos mecánicos. Las lecturas de color (n=5) se midieron en un espectrofotómetro VITA Easyshade V®. Resultados. Los materiales totalmente cerámicos mostraron un mejor desempeño mecánico (p < 0,001). Los resultados de estabilidad de color muestran que Ceramage, IPS e.max® y Zolid FX, mostraron una diferencia estadísticamente significativa (p ≤ 0,002) con Filtek Z250 XT, VITA VM®LC y VITA ENAMIC®. Conclusiones. Los resultados del presente trabajo muestran que los materiales totalmente cerámicos presentaron una mayor resistencia flexural y estabilidad de color que los materiales de base polimérica.

Effect of the incorporation of hydroxyapatite on the diametral tensile strength of conventional and hybrid glass ionomer cements.

The objective was to evaluate the effect of the incorporation of calcium hydroxyapatite particles (HAp) in the diametral tensile strength of a conventional type II glass ionomer (GC Gold Label 2) and a resin-modified glass ionomer cement (GC Gold Label 2 LC R). Two experimental HAp (E1HAp or E2HAp) were synthesized and characterized using X-ray diffraction and Confocal Raman spectroscopy. Both HAp were added into the powder of a conventional or resin-modified glass ionomer cement at 5 or 10 wt.%. A commercial HAp (CHAp) was used as reference material. For each glass ionomer cement, a group without the incorporation of HAp was used as a control. A universal testing machine was used for the mechanical test. The results were analyzed through a two-way ANOVA test followed by a complementary Tukey test. For all analyzes, the level of significance was set at α = 0.05. The average particle size for E1Hap was 15 µm, E2HAp was 35 µm and for CHAp was 1 µm. For conventional GIC, the addition of 10% E1HAp and 5% CHAp significantly increased the diametral tensile strength values (p ≤ 0.005). On the other hand, for the resin-modified GIC, except for the 5% E2HAp group, all experimental groups significantly reduced the values of diametral tensile strength (p ≤ 0.007). The addition of HAp improved the mechanical properties only for the conventional glass ionomer cement.

Synthesis and characterization of poly(vinyl alcohol)/chondroitin sulfate composite hydrogels containing strontium-doped hydroxyapatite as promising biomaterials.

Novel poly(vinyl alcohol)/chondroitin sulfate (PVA/CS) composite hydrogels containing hydroxyapatite (HA) or Sr-doped HA (HASr) particles were synthesized by a freeze/thaw method and characterized aiming towards biomedical applications. HA and HASr were synthesized by a wet-precipitation method and added to the composite hydrogels in fractions up to 15 wt%. Physical-chemical characterizations of particles and hydrogels included scanning electron microscopy, energy-dispersive spectroscopy, Fourier-transform infrared spectroscopy, X-ray diffraction, thermogravimetry, porosity, compressive strength/elastic modulus, swelling degree, and cell viability. Particles were irregular in shape and appeared to have narrow size variation. The thermal behavior of composite hydrogels was altered compared to the control (bare) hydrogel. All hydrogels exhibited high porosity. HA/HASr particles reduced total porosity without reducing pore size. The mechanical strength was improved as the fraction of HA or HASr was increased. HASr particles led to a faster water uptake but did not interfere with the total hydrogel swelling capacity. In cell viability essay, increased cell growth (above 120%) was observed in all groups including the control hydrogel, suggesting a bioactive effect. In conclusion, PVA/CS hydrogels containing HA or HASr particles were successfully synthesized and showed promising morphological, mechanical, and swelling properties, which are particularly required for scaffolding.

Establecimiento e implementación de un protocolo simplificado de expansión y cultivo de Células Madre de Pulpa Dental Humana (DPSCh) / Estabelecimento e implementação de um protocolo simplificado para expansão e cultura de células-tronco da polpa dentária humana (DPSCh) / Establishing and implementing a simplified protocol for the expansion and culture of human dental pulp stem cells (hDPSCs)

Resumen Objetivos: Establecer e implementar un protocolo simplificado de extracción, aislamiento primario y cultivo de células madre derivadas de la pulpa dental humana (DPSCh). Analizar cuantitativamente y cualitativamente las células aisladas. Metodología: 10 terceros molares sanos donados por pacientes que concurrieron a la Facultad de Odontología, UdelaR y otorgaron su consentimiento escrito fueron procesados antes de las 48 hs. Se realizó la fractura de la pieza para la obtención del tejido pulpar y se procesó por el método explante. Se analizó viabilidad celular y expresión de marcadores por citometría de flujo en pasajes 4 y 12 y se corroboró mediante inmunocitoquímica. Resultados: Las células obtenidas presentaron una vitalidad mayor al 90% en todos los pasajes, observándose una morfología característica y expresión de marcadores de células madre mesenquimales CD90, C105, CD73, CD29 y 166 mediante citometría de flujo en ambos pasajes. Conclusiones: Se logró establecer un protocolo de aislamiento y expansión celular, con alta tasa de éxito de una población de DPSCh.

Resumo Objetivos: Estabelecer e implementar um protocolo simplificado para a extração, isolamento primário e cultura de células-tronco da polpa dentária humana (DPSCh). Analise as células isoladas quantitativa e qualitativamente. Metodologia: 10 terceiros molares saudáveis ​​doados por pacientes que frequentaram a Faculdade de Odontologia UdelaR e deram consentimento por escrito foram processados ​​antes de 48 horas. A fratura da peça foi realizada para obtenção do tecido pulpar e processada pelo método do explante. A viabilidade celular e a expressão do marcador foram analisadas por citometría de fluxo nas passagens 4 e 12 e confirmadas por inmunocitoquímica. Resultados: As células obtidas apresentaram viabilidade superior a 90% em todas as passagens, observando uma morfologia característica e expressão dos marcadores de células-tronco mesenquimais CD90, C105, CD73, CD29 e 166 por citometría de fluxo em ambas as passagens. Conclusões: Foi possível estabelecer um protocolo de isolamento celular, com alta taxa de sucesso e segurança para isolar o DPSCh.

Abstract Objectives: To establish and implement a simplified protocol for the extraction, primary isolation, and culture of human dental pulp stem cells (hDPSCs). To analyze the isolated cells quantitatively and qualitatively. Methodology: Ten healthy third molars were donated by patients who attended the School of Dentistry, UdelaR, and gave their written consent. The teeth were processed within 48 hours. The teeth were sectioned to obtain the pulp tissue and processed with the explant method. Cell viability and marker expression were analyzed by flow cytometry at passages 4 and 12 and verified by immunocytochemistry. Results: The cells obtained had a vitality greater than 90% in all passages. We found the characteristic morphology and the expression of CD90, C105, CD73, CD29 and 166 mesenchymal stem cell markers by flow cytometry in both passages. Conclusion: It was possible to establish a cell isolation protocol that is highly successful and safe to isolate hDPSC.

Evaluación de la resistencia de unión a dentina humana de un sistema adhesivo universal con clorhexidina utilizado en modo de grabado total y autocondicionante / Avaliação da resistência de união à dentina humana de um sistema adesivo universal com clorexidina utilizado no modo de condicionamento total e autocondicionante Romina Tessore1 / Human dentin bond strength of a chlorhexidine containing universal adhesive system used in total-etch and self-etch mode

Objetivos: Evaluar la resistencia de unión a la microtracción en dentina humana de un sistema adhesivo universal con clorhexidina en su composición, en modo de grabado y lavado en 2 pasos, y en modo de autograbado. Metodología: 20 terceros molares divididos aleatoriamente en 4 grupos según el tipo de sistema adhesivo utilizado (Single Bond Universal®, 3MESPE y Peak Universal Bond®, Ultradent Products) y modo de uso (grabado total y autograbado). Se confeccionaron cuerpos de prueba sometidos al ensayo de microtracción utilizando una máquina de ensayos universales. Resultados: No se encontraron diferencias estadísticamente significativas entre los cuatro grupos estudiados. Conclusiones: La resistencia de unión de una resina compuesta a dentina humana no fue afectada por el uso de un sistema adhesivo universal que contiene clorhexidina en su composición aplicado en los modos de grabado total y autograbado

Objectives: To evaluate the microtensile bond strength to human dentin of chlorhexidine containing universal adhesive system applied in the total-etch and selfetch modes. Methods: Twenty third molars were randomly divided into four groups according to the universal adhesive system (Single Bond Universal ®, 3M ESPE and Peak Universal Bond®, Ultradent) and application mode used (total-etch and self-etch). Specimens were prepared and subjected to a microtensile bond strength using a MTS SANS universal testing machine. Results: No statistically significant differences were found in the microtensile bond strength between the four groups studied. Conclusions: The bond strength of a composite resin to human dentin was not affected by the use of a universal adhesive system with chlorhexidine in its composition applied in the total-etch and self-etch modes.

Objetivos: Avaliar a resistência de união á microtração na dentina humana de um sistema adesivo universal com clorexidina na sua composição, no modo de condicionamento total em dois passos e no modo autocondicionante. Metodologia: 20 terceiros molares foram divididos aleatoriamente em 4 grupos, de acordo com o tipo de sistema adesivo utilizado (Single Bond Universal®, 3MESPE e Peak Universal Bond®, Ultradent Products) e modo de uso (condicionamento total e autocondicionante). Os corpos de prova criados foram submetidos ao teste de microtração utilizando uma máquina de ensaios universal. Resultados: Não foram encontradas diferenças estatisticamente significativas entre os quatro grupos estudados. Conclusões: A resistência de união da resina composta à dentina humana não foi afetada pelo uso de um sistema adesivo universal contendo clorexidina em sua composição, aplicado nos modos de condicionamento total ou autocondicionamento.

Simple and Low-Cost Thermal Treatments on Direct Resin Composites for Indirect Use.

The aim of this study was to evaluate the influence of three low-cost additional thermal treatments, available in the dental office, on the mechanical, chemical and optical properties of a light-cured resin composite indicated for direct restorations but used as indirect restorative. The direct resin composite TPH3 (Dentsply) was light-polymerized using a light-emitting diode curing unit and submitted to three experimental additional thermal treatments: dry heat at 170 °C for 5 min, autoclave at 121 °C for 6 min, or microwave oven at 450 W for 3 min. The resin composite without any thermal treatment was used as negative control group. An indirect resin composite (Vita CM LC, Vita Zahnfabrik) was tested as a reference. Flexural strength, elastic modulus, microhardness, degree of C=C conversion, roughness before and after simulated toothbrush abrasion, translucency parameter and color difference (ΔE00) were evaluated. Data were analyzed at α=0.05. The indirect resin composite presented lower C=C conversion and mechanical performance. The flexural strength was significantly higher in the dry oven group compared with the control. The roughness was not different among groups before or after brushing, but the thermal treatments caused an increase in C=C conversion, microhardness, and elastic modulus without affecting the translucency parameter or showing visible color alteration (ΔE00<1.8). These results suggest that the use of additional thermal methods of polymerization represents an economical and simple alternative to enhance the mechanical and chemical properties of direct resin composites when used as indirect restoratives.

Simple and low-cost thermal treatments on direct resin composites for indirect use

Abstract The aim of this study was to evaluate the influence of three low-cost additional thermal treatments, available in the dental office, on the mechanical, chemical and optical properties of a light-cured resin composite indicated for direct restorations but used as indirect restorative. The direct resin composite TPH3 (Dentsply) was light-polymerized using a light-emitting diode curing unit and submitted to three experimental additional thermal treatments: dry heat at 170 °C for 5 min, autoclave at 121 °C for 6 min, or microwave oven at 450 W for 3 min. The resin composite without any thermal treatment was used as negative control group. An indirect resin composite (Vita CM LC, Vita Zahnfabrik) was tested as a reference. Flexural strength, elastic modulus, microhardness, degree of C=C conversion, roughness before and after simulated toothbrush abrasion, translucency parameter and color difference (ΔE00) were evaluated. Data were analyzed at α=0.05. The indirect resin composite presented lower C=C conversion and mechanical performance. The flexural strength was significantly higher in the dry oven group compared with the control. The roughness was not different among groups before or after brushing, but the thermal treatments caused an increase in C=C conversion, microhardness, and elastic modulus without affecting the translucency parameter or showing visible color alteration (ΔE00<1.8). These results suggest that the use of additional thermal methods of polymerization represents an economical and simple alternative to enhance the mechanical and chemical properties of direct resin composites when used as indirect restoratives.

Resumo O objetivo deste estudo foi avaliar a influência de três tratamentos térmicos adicionais de baixo custo, disponíveis no consultório dentário, nas propriedades mecânicas, químicas e ópticas de uma resina composta fotoativada indicada para restaurações diretas porém usada como restaurador indireto. A resina composta direta TPH3 (Dentsply) foi fotoativada usando um diodo emissor de luz e submetida a três tratamentos térmicos adicionais experimentais: forno seco a 170 °C por 5 min, autoclave a 121 °C por 6 min ou forno de micro-ondas a 450 W por 3 min. A resina composta sem qualquer tratamento térmico adicional foi usada como grupo controle negativo. Uma resina composta indireta (Vita CM LC, Vita Zahnfabrik) foi testada como referência comercial. Resistência à flexão, módulo de elasticidade, microdureza, grau de conversão de C=C, rugosidade antes e após abrasão por escovação simulada, parâmetro de translucidez e diferença de cor (ΔE00) foram avaliados. Os dados foram analisados considerando α=0.05. A resina composta indireta apresentou menor conversão de C=C e desempenho mecânico. A resistência à flexão foi significativamente mais alta no grupo forno seco comparado ao controle. A rugosidade não foi diferente entre os grupos antes ou após a escovação, porém os tratamentos térmicos adicionais causaram aumento na conversão de C=C, microdureza e módulo de elasticidade, sem afetar o parâmetro de translucidez ou mostrar alteração de cor visível (ΔE00<1,8). Estes resultados sugerem que o uso de métodos térmicos adicionais de polimerização representam alternativa econômica e simples para aprimorar as propriedades mecânicas e químicas de resinas compostas diretas quando utilizadas como restauradores indiretos.

Bone, Periodontal and Dental Pulp Regeneration in Dentistry: A Systematic Scoping Review.

The aim of presented systematic scoping review was to investigate the actual and future clinical possibilities of regenerative therapies and their ability to regenerate bone, periodontal and pulp with histological confirmation of the nature of formed tissue. Electronic search was conducted using a combination between Keywords and MeSH terms in PubMed, Scopus, ISI-Web of Science and Cochrane library databases up to January 2016. Two reviewers conducted independently the papers judgment. Screened studies were read following the predetermined inclusion criteria. The included studies were evaluated in accordance with Arksey and O'Malley's modified framework. From 1349 papers, 168 completed inclusion criteria. Several characterized and uncharacterized cells used in Cell Therapy have provided bone regeneration, demonstrating bone gain in quantity and quality, even as accelerators for bone and periodontal regeneration. Synthetic and natural scaffolds presented good cell maintenance, however polyglycolid-polylactid presented faster resorption and consequently poor bone gain. The Growth Factor-Mediated Therapy was able to regenerate bone and all features of a periodontal tissue in bone defects. Teeth submitted to Revascularization presented an increase of length and width of root canal. However, formed tissues not seem able to deposit dentin, characterizing a repaired tissue. Both PRP and PRF presented benefits when applied in regenerative therapies as natural scaffolds. Therefore, most studies that applied regenerative therapies have provided promising results being possible to regenerate bone and periodontal tissue with histological confirmation. However, pulp regeneration was not reported. These results should be interpreted with caution due to the short follow-up periods.

Bone, periodontal and dental pulp regeneration in dentistry: a systematic scoping review

Abstract The aim of presented systematic scoping review was to investigate the actual and future clinical possibilities of regenerative therapies and their ability to regenerate bone, periodontal and pulp with histological confirmation of the nature of formed tissue. Electronic search was conducted using a combination between Keywords and MeSH terms in PubMed, Scopus, ISI-Web of Science and Cochrane library databases up to January 2016. Two reviewers conducted independently the papers judgment. Screened studies were read following the predetermined inclusion criteria. The included studies were evaluated in accordance with Arksey and O'Malley's modified framework. From 1349 papers, 168 completed inclusion criteria. Several characterized and uncharacterized cells used in Cell Therapy have provided bone regeneration, demonstrating bone gain in quantity and quality, even as accelerators for bone and periodontal regeneration. Synthetic and natural scaffolds presented good cell maintenance, however polyglycolid-polylactid presented faster resorption and consequently poor bone gain. The Growth Factor-Mediated Therapy was able to regenerate bone and all features of a periodontal tissue in bone defects. Teeth submitted to Revascularization presented an increase of length and width of root canal. However, formed tissues not seem able to deposit dentin, characterizing a repaired tissue. Both PRP and PRF presented benefits when applied in regenerative therapies as natural scaffolds. Therefore, most studies that applied regenerative therapies have provided promising results being possible to regenerate bone and periodontal tissue with histological confirmation. However, pulp regeneration was not reported. These results should be interpreted with caution due to the short follow-up periods.

Resumo O objetivo da presente Scoping review foi investigar as possibilidades clínicas atuais e futuras das terapias regenerativas e sua capacidade de regenerar tecido ósseo, periodontal e polpar em humanos com confirmação histológica da natureza do tecido formado. Uma busca eletrônica foi realizada utilizando uma combinação entre as palavras-chave e termos MeSH nos bancos de dados PubMed, Scopus, ISI-web of Science e Cochrane library até janeiro de 2016. Dois revisores realizaram de forma independente o julgamento dos documentos. Os estudos selecionados foram lidos seguindo os critérios de inclusão predeterminados. Os estudos incluídos foram avaliados de acordo com a estrutura modificada de Arksey e O'Malley. Dos 1349 artigos, 168 preencheram os critérios de inclusão. Várias células caracterizadas e não caracterizadas promoveram regeneração óssea utilizada em terapias celulares, demonstrando ganho ósseo em quantidade e qualidade, de forma rápida para regeneração óssea e periodontal. Os scaffolds sintéticos e naturais apresentaram boa manutenção celular, no entanto o poliglicol-polilácido apresentou uma reabsorção rápida e, consequentemente, pequeno ganho ósseo. A terapia mediada por fatores de crescimento foi capaz de regenerar tecido ósseo e todas as características de um tecido periodontal. Dentes submetidos à revascularização apresentaram aumento do comprimento e largura do canal radicular. No entanto, os tecidos formados não foram capazes de depositar dentina, caracterizando um tecido reparado. Tanto o PRP quanto o PRF parecem apresentar benefícios quando aplicados em terapias regenerativas sendo um bom scaffold natural. Portanto, a maioria dos estudos que aplicaram terapias regenerativas forneceram resultados promissores sendo possível regenerar tecido ósseo e periodontal com confirmação histológica. No entanto, não foi observada regeneração de polpa dental. Estes resultados devem ser interpretados com cautela.