Vitamin C-squalene bioconjugate promotes epidermal thickening and collagen production in human skin.

Vitamin C (Vit C) benefits to human skin physiology notably by stimulating the biosynthesis of collagen. The main cutaneous collagens are types I and III, which are less synthesized with aging. Vit C is one of the main promotors of collagen formation but it poorly bypasses the epidermis stratum corneum barrier. To address this challenge, we developed a lipophilic version of Vit C for improving skin diffusion and delivery. Vit C was covalently conjugated to squalene (SQ), a natural lipid of the skin, forming a novel Vit C-SQ derivative suitable for cream formulation. Its biological activity was investigated on human whole skin explants in an ex vivo model, through histology and protein and gene expression analyses. Results were compared to Vit C coupled to the reference lipophilic compound palmitic acid, (Vit C-Palmitate). It was observed that Vit C-SQ significantly increased epidermal thickness and preferentially favored collagen III production in human skin after application for 10 days. It also promoted glycosaminoglycans production in a higher extent comparatively to Vit C-Palmitate and free Vit C. Microdissection of the explants to separate dermis and epidermis allowed to measure higher transcriptional effects either in epidermis or in dermis. Among the formulations studied, the strongest effects were observed with Vit C-SQ.

Far infrared micro-spectroscopy: an innovative method to detect individual metal-organic framework particles.

The purpose of this study is to extend the spectral range of a differential method of infrared micro-spectroscopy in order to allow the accurate detection of nanoparticles of interest for biomedical applications. Among these, metal-organic framework (MOF) nanoparticles have attracted increasing interest due to their capacity to incorporate high drug payloads, biodegradability, and possibility of tailoring their surfaces by grafting specific ligands. However, MOF particle detection in biological media without grafting or incorporating fluorescent molecules is challenging. We took advantage here of the presence of the specific absorption bands of nanoscale MOFs in far infrared in order to individually discriminate them. Here we show that single MOF nanoparticles can be imaged with a spatial resolution of a few tens of nanometers.

New insights into the degradation mechanism of metal-organic frameworks drug carriers.

A versatile method based on Raman microscopy was developed to follow the degradation of iron carboxylate Metal Organic Framework (MOF) nano- or micro-particles in simulated body fluid (phosphate buffer). The analysis of both the morphology and chemical composition of individual particles, including observation at different regions on the same particle, evidenced the formation of a sharp erosion front during particle degradation. Interestingly, this front separated an intact non eroded crystalline core from an amorphous shell made of an inorganic network. According to Mössbauer spectrometry investigations, the shell consists essentially of iron phosphates. Noteworthy, neither drug loading nor surface modification affected the integrity of the tridimensional MOF network. These findings could be of interest in the further development of next generations of MOF drug carriers.

Towards improved HIV-microbicide activity through the co-encapsulation of NRTI drugs in biocompatible metal organic framework nanocarriers.

The efficacy of the routinely used anti-HIV (Human Immunodeficiency Virus) therapy based on nucleoside reverse transcriptase inhibitors (NRTIs) is limited by the poor cellular uptake of the active triphosphorylated metabolites and the low efficiency of intracellular phosphorylation of their prodrugs. Nanoparticles of iron(iii) polycarboxylate Metal-Organic Frameworks (nanoMOFs) are promising drug nanocarriers. In this study, two active triphosphorylated NRTIs, azidothymidine triphosphate (AZT-Tp) and lamivudine triphosphate (3TC-Tp), were successfully co-encapsulated into the biocompatible mesoporous iron(iii) trimesate MIL-100(Fe) nanoMOF in order to improve anti-HIV therapies. The drug loaded nanoMOFs could be stored for up to 2-months and reconstituted after freeze drying, retaining similar physicochemical properties. Their antiretroviral activity was evidenced in vitro on monocyte-derived macrophages experimentally infected with HIV, making these co-encapsulated nanosystems excellent HIV-microbicide candidates.

In vivo behavior of MIL-100 nanoparticles at early times after intravenous administration.

Metal-organic frameworks have shown interesting features for biomedical applications, such as drug delivery and imaging agents. The benchmarked mesoporous iron(III) trimesate MIL-100 MOF nanocarrier combines progressive release of high drug cargoes with absence of visible in vivo toxicity. Although in a previous study pharmacokinetics and biodistribution of MIL-100 nanoparticles were evaluated in the long term (from 24h to 1 month), the crucial times for drug targeting and delivery applications are shorter (up to 24h). Thus, this work aims to study the blood circulating profile and organ accumulation of MIL-100 nanocarrier at early times after administration. For this purpose, after intravenous administration to rats, both constitutive components of MIL-100 (trimesate and iron) were quantified by high performance liquid chromatography and a spectrophotometric method, respectively. The pharmacokinetic profile suggested that the nanoparticles act as a depot in the blood stream during the first hours before being cleared. Accumulation took mainly place in the liver and, in some extent, in the spleen. Nevertheless, histological studies demonstrated the absence of morphological alterations due to the presence of the particles in these organs. Liver function was however slightly altered as reflected by the increased plasma aspartate aminotransferase concentrations. Finally trimesate was progressively eliminated in urine.

Antineoplastic busulfan encapsulated in a metal organic framework nanocarrier: first in vivo results.

Nanoparticles of a mesoporous iron(iii) trimesate MIL-100 nanocarrier encapsulating high amounts of the challenging antineoplastic busulfan were administered to rats and compared with the commercial Busilvex®. Large differences in serum concentration of both busulfan and trimesate revealed the great impact of drug encapsulation both on the drug and on nanoparticle pharmacokinetics during the first 24 h of administration.

A "green" strategy to construct non-covalent, stable and bioactive coatings on porous MOF nanoparticles.

Nanoparticles made of metal-organic frameworks (nanoMOFs) attract a growing interest in gas storage, separation, catalysis, sensing and more recently, biomedicine. Achieving stable, versatile coatings on highly porous nanoMOFs without altering their ability to adsorb molecules of interest represents today a major challenge. Here we bring the proof of concept that the outer surface of porous nanoMOFs can be specifically functionalized in a rapid, biofriendly and non-covalent manner, leading to stable and versatile coatings. Cyclodextrin molecules bearing strong iron complexing groups (phosphates) were firmly anchored to the nanoMOFs' surface, within only a few minutes, simply by incubation with aqueous nanoMOF suspensions. The coating procedure did not affect the nanoMOF porosity, crystallinity, adsorption and release abilities. The stable cyclodextrin-based coating was further functionalized with: i) targeting moieties to increase the nanoMOF interaction with specific receptors and ii) poly(ethylene glycol) chains to escape the immune system. These results pave the way towards the design of surface-engineered nanoMOFs of interest for applications in the field of targeted drug delivery, catalysis, separation and sensing.

Porous metal organic framework nanoparticles to address the challenges related to busulfan encapsulation.

Busulfan is an alkylating agent widely used in chemotherapy, but with severe side effects. Many attempts have been made to entrap busulfan in nanocarriers to avoid liver accumulation and to protect it against rapid degradation in aqueous media. However, poor loadings (≤ 5 wt%) and fast release were generally obtained due to the low affinity of busulfan towards the nanocarriers. Moreover, drug crystallization often occurred during nanoparticle preparation. To circumvent these drawbacks, metal organic framework (MOF) nanoparticles, based on crystalline porous iron (III) carboxylates, have shown an unprecedented loading (up to 25 wt%) of busulfan. This was attributed to the high porosity of nanoMOFs as well as to their hydrophilic-hydrophobic internal microenvironment well adapted to the amphiphilic character of busulfan. NanoMOFs formulations have kept busulfan in molecular form, preventing its crystallization and degradation. Indeed, busulfan was released intact, as proved by the maintenance of its pharmacological activity.

Cyclodextrins for drug delivery.

Cyclodextrins (CDs) are macrocyclic oligosaccharides composed of α(1,4)-linked glucopyranose subunits. These molecules possess a cage-like supramolecular structure, comparable with the structures of crown ethers, cryptands, spherands, cyclophanes, or calixarenes. However, it took 50 years to establish the molecular structure of CDs. Owing to their capability to form inclusion complexes with a variety of guest molecules, CDs are considered as the most important supramolecular host family among all supramolecular structures mentioned above. They can form complexes with various types of molecules including inorganic, organic, or organometallic that can be radical, cationic, anionic, or neutral molecules. This phenomenon bears the name "molecular recognition," while the selectivity in the formation of complexes with enantiomeric species as guests is called "chiral recognition." In addition, the properties of the molecules forming the complexes with CDs can be modified significantly. As such, a large number of scientists have attempted to elaborate and evaluate various CD derivatives that are able to complex a variety of drugs, enhancing by this way their in vivo solubility and activity. Moreover, a large number of publications describe CD uses in other fields such as foods, textile, cosmetics, or agriculture. This review reports on the recent developments of CDs in drug delivery using various routes of administration.

Self-assembling cyclodextrin based hydrogels for the sustained delivery of hydrophobic drugs.

This study aims to investigate the rheological properties of self-assembling gels containing cyclodextrins with potential application as injectable matrix for the sustained delivery of poorly soluble drugs. The ability of these gels to entrap two hydrophobic molecules, benzophenone (BZ) and tamoxifen (TM), and to allow their in vitro sustained release was evaluated. In view of their future pharmaceutical use, gels were sterilized by high hydrostatic pressures (HHP) and tested for their biocompatibility. The gels formed instantaneously at room temperature, by mixing the aqueous solutions of two polymers: a beta-cyclodextrin polymer (pbetaCD) and a hydrophobically modified dextran by grafting alkyl side chains (MD). MD-pbetaCD gels presented a viscoelastic behavior under low shear, characterized by constant values of the loss modulus G'' and the storage modulus G'. The most stable gels were obtained for a total polymer concentration C(p) of 6.6% and 7.5% (w/w), and a polymer ratio MD/pbetaCD of 50/50 and 33/67 (w/w). BZ and TM were successfully incorporated into MD-pbetaCD gels with loading efficiencies as high as 90%. In vitro, TM and BZ were released gradually from the gel matrix with less than 25% and 75% release, respectively, after 6 days incubation. HHP treatment did not modify the rheological characteristics of MD-pbetaCD gels. Moreover, the low toxicity of these gels after intramuscular administration in rabbits makes them promising injectable devices for local delivery of drugs.

Novel self-assembling nanogels: stability and lyophilisation studies.

The stability of new supramolecular nanoassemblies (nanogels), based on the association of a hydrophobically modified dextran (MD) and a beta-cyclodextrin polymer (pbetaCD), has been studied by two complementary methods: (i) size measurements and (ii) turbidity experiments using a Turbiscan optical analyser. Nanogels of about 120-150nm were obtained whatever the concentration of the two polymer solutions. At low concentrations, the suspensions presented little mean diameter variations upon storage. However, the concentrated ones tended to destabilize and their mean diameter increased upon time. Size measurements and Turbiscan investigations have demonstrated that destabilization in the MD-pbetaCD nanogel suspension was only due to particle aggregation and/or fusion, as no sedimentation or creaming occurred. The destabilization of MD-pbetaCD suspensions led to the formation of a highly viscous phase, as a final state. Moreover, the two methods have shown that aggregation and/or fusion phenomena were more pronounced in the concentrated MD-pbetaCD suspensions than in the diluted ones. The stability of MD-pbetaCD suspensions could be improved by their storage at 4 degrees C. Finally, freeze-drying was found to be a convenient method for the long-time storage of MD-pbetaCD nanoassemblies.

Spontaneous association of hydrophobized dextran and poly-beta-cyclodextrin into nanoassemblies. Formation and interaction with a hydrophobic drug.

New nanoassemblies were instantaneously prepared by mixing two aqueous solutions, one containing a beta-cyclodextrin polymer (pbetaCD), and the other a hydrophobically modified by alkyl chains dextran (MD). The formation mechanism and the inner structure of these nanoassemblies were analysed using surface tension measurements and (1)H NMR spectroscopy. The effect of a hydrophobic guest molecule, such as benzophenone (BZ), on the formation and stability of the nanoassemblies was also evaluated. MD exhibited the typical behaviour of a soluble amphiphilic molecule and adsorbed at the air/water interface. Whereas the injection of native beta-CDs in the solution beneath the adsorbed MD monolayer did not produce any change in the surface tension, that of the pbetaCD resulted in an increase in the surface tension, indicating the desorption of the polymer from the interface. This result accounts for a cooperative effect of beta-CDs linked together in the pbetaCD polymer on dextran desorption. The presence of benzophenone in the system hindered the sequestration of dextran alkyl moieties by beta-CD in the polymer without impeding the formation of associative nanoassemblies of 100-200 nm. (1)H NMR investigations demonstrated that, in the BZ-loaded nanoassemblies, the hydrophobic molecule was mainly located into the cyclodextrin cavities.

Freeze-drying of composite core-shell nanoparticles.

The effects of four sugars (glucose, saccharose, maltose, trehalose) and one surfactant (Poloxamer 188), on the freeze-drying of poly(isobutylcyanoacrylate) (PIBCA), poly(epsilon-caprolactone)-poly(ethylene glycol) (PCL-PEG), and novel core (mainly PIBCA)-shell (principally PEG) composite nanoparticles (CNP) obtained by co-precipitation were investigated. The efficiency of the additives against the adverse effect of freeze-drying on the redispersibility of the nanoparticles was evaluated, based on the visual appearance of the nanoparticle suspensions (Tyndall effect and aggregation), and on the determination of the mean diameter ratio of the nanoparticles before and after freeze-drying. The results indicated that the addition of both sugars and surfactant was essential for the good redispersion of freeze-dried nanoparticles displaying hydrophobic (PIBCA) or hydrophilic (PCL-PEG and CNP) surfaces.

Novel composite core-shell nanoparticles as busulfan carriers.

This study presents a method for the design of novel composite core-shell nanoparticles able to encapsulate busulfan, a crystalline drug. They were obtained by co-precipitation of mixtures of poly(isobutylcyanoacrylate) (PIBCA) and of a diblock copolymer, poly(epsilon-caprolactone)-poly(ethylene glycol) (PCL-PEG), in different mass ratios. The nanoparticle size, morphology and surface charge were assessed. The chemical composition of the top layers was determined by X-ray photo-electron spectroscopy (XPS). (3)H-labelled busulfan was used in order to determine the drug loading efficiency and the in vitro drug release by liquid scintillation counting. Physico-chemical techniques such as Zeta potential determination and XPS analysis provided evidence about a preferential surface distribution of the PCL-PEG polymer. Therefore, composite nanoparticles have a "core-shell"-type structure, where the "core" is essentially formed by the PIBCA polymer and the "shell" by the PCL-PEG copolymer. The use of PIBCA to form the core of the nanoparticles leads to a 2-4 fold drug loading increase, in comparison to the single PCL-PEG nanoparticles. In addition, the complement activation results showed a significant difference between the composite nanoparticles and the single PIBCA nanoparticles, thus demonstrating that PEG at the surface of the nanoparticles reduced the complement consumption. The PIBCA:PCL-PEG composite nanoparticles prepared using the new co-precipitation method here described represent an original approach for busulfan administration.

Interactions between hen egg-white lysozyme, PEG2,000, and PLA50 at the air-water interface.

In this paper, we compared the efficiency of polymer films, made of a poly(ethylene glycol) (PEG2,000)/poly(d,l-lactide) (PLA50) mixture, or a PEG2,000-PLA50 copolymer, to prevent adsorption of a model protein, the hen egg-white lysozyme (HEWL), at the air-water interface. This was achieved by analyzing the surface pressure/surface area curves, and the X-ray reflectivity data of the polymer films spread on a Langmuir trough, obtained in absence or in presence of the protein. For both the mixture and the copolymer, the amount of protein adsorbed at the air-water interface decreases when the density of the polymer surface coverage increases. It was shown that even in a condensed state, the polymer film made by the mixture can not totally prevent HEWL molecules to adsorb and penetrate the polymer mixed film, but however, protein molecules would not be directly exposed to the more hydrophobic phase, i.e. the air phase. It was also shown that the configuration adopted by the copolymer at the interface in its condensed state would prevent adsorption of HEWL molecules for several hours; this would be due in particular to the presence of PEG segments in the interfacial film.

Novel core(polyester)-shell(polysaccharide) nanoparticles: protein loading and surface modification with lectins.

This study describes new lectin-decorated or protein-loaded nanoparticles with a hydrophobic poly(epsilon-caprolactone) (PCL) core and a hydrophilic dextran (Dex) corona. In this view, a family of block Dex-PCLn copolymers was first synthesized, consisting of a Dex backbone to which n preformed PCL blocks were grafted. The ability of these new copolymers to form nanoparticles was evaluated in comparison with a series of PCL homopolymers of various molecular weights (2000, 10,000 and 40,000 g/mole). Two different nanoparticle preparation methods have been developed and tested for their efficacy to incorporate proteins. For this, three proteins were used: a model protein, bovine serum albumin (BSA), a lectin from leaves of Bauhinia monandra (BmoLL) and Lens culinaris (LC) lectin. All these proteins were successfully incorporated in nanoparticles with a mean diameter around 200 nm. Lectins could also be adsorbed onto the surface of Dex-PCLn nanoparticles. Surface-bound BmoLL conserved its hemagglutinating activity, suggesting the possible application of this type of surface-modified nanoparticles for targeted oral administration. Caco-2 cellular viability was higher than 70% when put in contact with Dex-PCLn nanoparticles, even at concentrations as high as 660 microg/ml.

Design of poly-epsilon-caprolactone nanospheres coated with bioadhesive hyaluronic acid for ocular delivery.

This study was performed to design a new ocular drug delivery system based on poly-epsilon-caprolactone (PCL) biodegradable nanospheres (NS) coated with a bioadhesive polymer, hyaluronic acid (HA), in order to combine ophthalmic prolonged action with the ease of application. The aim of this work was to investigate three strategies to attach HA on NS surface: (1) coating the core by chain entanglement with HA; (2) coating NS by HA adsorption; (3) coating NS by electrostatic interactions between negatively charged HA and a cationic surfactant (stearylamine, SA, or benzalkonium chloride, BKC). A radioimmunoassay technique, usually used for HA quantification in serum, was transposed to determine the amount of HA on the NS. The results show that HA is strongly attached on NS positively charged by cationic surfactant. This system is stable and not influenced by dilution. These results show the possibility of using cationic surfactants to obtain a HA coating by electrostatic interactions. BKC, approved for ophthalmic administration, was retained because it was more firmly anchored within the PCL matrix and the amount of HA attached was high (41.6 microg HA/mg PCL). Moreover, the yield of fixation reached 50%. Therefore, by using a simple preparation method, it was possible to obtain stable HA and intact HA-coated NS.

Biodistribution of long-circulating PEG-grafted nanocapsules in mice: effects of PEG chain length and density.

PURPOSE: To study the pharmacokinetics and biodistribution of novel polyethyleneglycol (PEG) surface-modified poly(rac-lactide) (PLA) nanocapsules (NCs) and to investigate the influence of PEG chain length and content. METHODS: The biodistribution and plasma clearance in mice of different NC formulations were studied with [3H]-PLA. PLA-PEG copolymers were used in NC preparations at different chain lengths (5 kDa and 20 kDa) and PEG contents (10% and 30% w/w of total polymer). In vitro and in vivo stability were also checked. RESULTS: Limited [3H]-PLA degradation was observed after incubation in mouse plasma for 1 h, probably because of to the large surface area and thin polymer wall. After injection into mice. NCs prepared with PLA-PEG copolymers showed an altered distribution compared to poloxamer-coated PLA NCs. An increased concentration in plasma was also observed for PLA-PEG NCs. even after 24 h. A dramatic difference in the pharmacokinetic parameters of PLA-PEG 45-20 30% NCs compared to poloxamer-coated NCs indicates that covalent attachment, longer PEG chain lengths, and higher densities are necessary to produce an increased half-life of NCs in vivo. CONCLUSIONS: Covalently attached PEG on the surface of NCs substantially can reduce their clearance from the blood compartment and alter their biodistribution.

Relationship between complement activation, cellular uptake and surface physicochemical aspects of novel PEG-modified nanocapsules.

The aim of our work was to examine the relationship between modifications of the surface of nanocapsules (NC) by adsorption or covalent grafting of poly(ethylene oxide) (PEG), and changes in their phospholipid (PL) content on complement activation (C3 cleavage) and on uptake by macrophages. The physicochemical characterization of the NC included an investigation of their properties, such as surface charge, size, hydrophilicity, morphology and homogeneity. This is the first time that such properties have been correlated with biological interactions for NC, a novel carrier system with a structure more complex than nanospheres. C3 crossed immunoelectrophoresis revealed the reduced activation for NC with longer PEG chain and higher density, although all formulations induced C3 cleavage to a lesser or greater extent. NC bearing PEG covalently bound to the surface were weaker activators of complement than plain PLA [poly(D,L-lactide)] NC or nanospheres (NS). Furthermore, the fluorescent/confocal microscopy of J774A1 cells in contact with NC reveal a dramatically reduced interaction with PEG-bearing NC. However, the way in which PEG was attached (covalent or adsorbed) seemed to affect the mechanism of uptake. Taken together, these results suggest that the low level of protein binding to NC covered with a high density of 20kDa PEG chains is likely to be due to the steric barriers surrounding these particles, which prevents protein adsorption and reduces their interaction with macrophages.

Protein C-loaded monomethoxypoly (ethylene oxide)-poly(lactic acid) nanoparticles.

This paper deals with the preparation and characterization of monomethoxypoly(ethylene oxide)-poly(lactic acid) (MPEO-PLA) nanoparticles containing protein C, a plasma inhibitor which regulates the mechanism of blood coagulation. Protein C was entrapped in MPEO-PLA nanoparticles using the double emulsion method. The influence of MPEO-PLA copolymers on the different parameters was evaluated: characteristics of protein C-loaded nanoparticles, in vitro release of the protein, evolution of the particle size with incubation time and MPEO release. The nanoparticle size does not depend on copolymer characteristics (MPEO and/or PLA block molecular weight). On the other hand, the efficiency of protein C entrapment is affected by the copolymer characteristics. The burst effect during the protein C release is increased with the hydrophilic character of the copolymer. Moreover, protein C adsorption on the particle surface during its release may be related to MPEO release. Only 25% of the released protein C is active, which clearly illustrates that it is altered during its encapsulation. The optimization of the experimental parameters which disturbed entrapped protein C activity, i.e. sonication time and organic solvent was investigated and has led to a preservation of protein C activity. Then, to optimize its entrapment efficiency, a blend PLA/MPEO-PLA (25/75) was used to prepare nanoparticles. This blend limited burst effect of protein C and its adsorption. However, protein C is only partially released which implicates further investigation for a potential therapeutic use.