[Suicide risk and hospitalization: is a paradigm shift necessary?] / Risque suicidaire et hospitalisation : un changement de paradigme est-il nécessaire ?

At present, suicidal patients are still hospitalized to reduce their risk of committing a life-threatening act. Yet suicide research, long dominated by the ambition to identify people at risk, shows that the prediction model is largely ineffective. The time has come for a paradigm shift to: give up categorizing patients according to their risk; recognize that hospitalization, if not accompanied by a well-defined purpose, can become iatrogenic; formulate achievable short-term objectives, guiding such hospitalizations on the basis of a reproducible empirical model and demonstrating its benefits beyond keeping the patient alive. Interventions aim thus to reduce distress, personalize care and promote the change required by the suicidal crisis.

À l'heure actuelle, des patients suicidaires sont encore hospitalisés pour réduire leur risque de commettre une action mettant leur vie en péril. Or, la recherche sur le suicide, longtemps dominée par l'ambition d'identifier les personnes à risque, montre que le modèle de la prédiction s'avère largement inefficace à les distinguer. L'heure est au changement de paradigme afin de : renoncer à catégoriser les patients selon leur risque ; reconnaître qu'une hospitalisation, si elle n'est pas accompagnée dobjectifs bien définis, peut devenir iatrogène ; formuler des objectifs à court terme guidant ces hospitalisations sur la base d'un modèle empirique reproductible et montrant ses bienfaits au-delà du maintien en vie du patient. Les interventions visent ainsi à diminuer la détresse, personnaliser le soin et promouvoir le changement exigé par la crise suicidaire.

The Interpersonal Hypersensitivity Formulation of Good Psychiatric Management as a Psychoeducational Intervention for Borderline Personality Disorder.

Interpersonal hypersensitivity (IHS) is a core organizing concept of Good Psychiatric Management, a generalist treatment for borderline personality disorder (BPD) that relies on basic tools most clinicians already employ yet is informed by an organized and evidence-based framework, developed for dissemination in various mental health care settings. We work in an inpatient psychiatric unit that specializes in the management of suicidal crises at the University Hospitals of Geneva, Switzerland. Because we see numerous patients with previously undiagnosed BPD during their first hospitalization, we have developed techniques and instruments to promote efficient and easy-to-implement psychoeducation. In this article, we propose a practical and user-friendly measure of IHS that is well-suited for use by multidisciplinary inpatient staff or outpatient nursing-based staff, the IHS Ruler, which is based on a visual analog scale. It is a pragmatic tool for preliminary psychoeducation for patients with BPD and their caregivers. Its ease of use and structured way of presenting the inner experience of these patients in relation to their current interpersonal environment allows caregivers to establish a framework for internal reflection and sharing, discuss the causes of current transactions, and illuminate larger patterns in the causes of the patient's crises. Ultimately, this process can help patients and the clinical staff supporting them anticipate future problems.

Wear-resistant CoCrNi multi-principal element alloy at cryogenic temperature.

Traditional high strength engineering alloys suffer from serious surface brittleness and inferior wear performance when servicing under sliding contact at cryogenic temperature. Here, we report that the recently emerging CoCrNi multi-principal element alloy defies this trend and presents dramatically enhanced wear resistance when temperature decreases from 273 to 153 K, surpassing those of cryogenic austenitic steels. The temperature-dependent structure characteristics and deformation mechanisms influencing the cryogenic wear resistance of CoCrNi are clarified through microscopic observation and atomistic simulation. It is found that sliding-induced subsurface structures show distinct scenarios at different deformation temperatures. At cryogenic condition, significant grain refinement and a deep plastic zone give rise to an extended microstructural gradient below the surface, which can accommodate massive sliding deformation, in direct contrast to the strain localization and delamination at 273 K. Meanwhile, the temperature-dependent cryogenic deformation mechanisms (stacking fault networks and phase transformation) also provide additional strengthening and toughening of the subsurface material. These features make the CoCrNi alloy particularly wear resistant at cryogenic conditions and an excellent candidate for safety-critical applications.

Case reports: Using Good Psychiatric Management (GPM) conceptualizations in the dimensional assessment and treatment of personality disorders.

Good Psychiatric Management (GPM) is a generalist clinical management approach for borderline personality disorder that incorporates common ingredients of good standard care for any psychiatric diagnosis with what works from prevailing specialist psychotherapies. Similar to all validated therapies for BPD, it relies on a specified formulation of the disorder' symptoms as arising from interpersonal hypersensitivity, to dynamically describe typical patterns of daily self- and interpersonal issues that drive the instability that defines the general personality dysfunction characteristic of the disorder. Recent adaptations of GPM have been proposed for narcissistic personality disorder and obsessive-compulsive personality disorder, with development of similar dynamic models for both (intrapsychic coherence model and model of overcontrol). New dimensional models of personality disorder diagnosis have been developed to address limitations of categorical approach, but the incorporation of these models into usage in the delivery of clinical services (where categorical approach remains the most used) is limited. This paper describes an adaptation of GPM to two cases of personality disorder that illustrate the usefulness of GPM models for dynamic representation of complex daily fluctuations in internal psychic coherence and interpersonal functioning. Specialist psychotherapies will never meet the demands of public health needs to treat personality dysfunction, and incorporation of new dimensional models of diagnosis are needed for treatments that can provide a minimal standard of care for providers and patients.

Examining readmission factors in psychiatric emergency care for individuals with personality disorders: A 6-year retrospective study.

People with personality disorders (PDs) are often admitted to psychiatric emergency services due to the frequent repetition of acute crises. This study drew on the ICD diagnostic records of 2,634 individuals with PDs who were admitted to a specialized inpatient psychiatric crisis unit over a 6-year period. Multiple logistic regressions and survival regressions were performed to examine whether PD categories, gender, and other individual, interpersonal, and precipitating factors were associated with readmission and time-to-readmission. The results showed a 16.1% readmission rate. Of these, 99.5% of readmissions occurred within 4 years following the first admission. Gender was the main factor associated with both readmission and time-to-readmission: while men were readmitted faster, more women in total were readmitted for a second psychiatric emergency hospitalization. Findings also indicated that readmission rate and time-to-readmission differed following the category of PD: readmission rate in a ratio of 1-2 (from 8% to 10% for dissocial and paranoid PD up to 19%-21% for impulsive and borderline PD), and time-to-readmission in a ratio of 1-5 (from 1 month for anankastic and dependent, to 5 months for impulsive, histrionic and anxious-avoidant PD). Limitations of this naturalistic study include a lack of self-reported measures and generalizability to less specialized emergency settings. Future research should include a prospective longitudinal design using standardized scalable measurement tools to improve the completeness and accuracy of the data concerning the psychological processes involved in risk and time-to-readmission after brief hospitalizations in emergency psychiatry. (PsycInfo Database Record (c) 2023 APA, all rights reserved).

[Management of suicidal crisis: mentalizing as a team]. / Prise en charge de la crise suicidaire : mentaliser en équipe.

The hospital management of patients experiencing a suicidal crisis and suffering from a personality disorder is complex for caregivers. The care model must be adapted and applied by a multidisciplinary team. The emotional charge of these crisis situations makes it difficult for caregivers to maintain their ability to treat mental states with curiosity and without necessarily experiencing them as they appear to them. In other words, it could be difficult to mentalize. For example, an expressed desire to die may be much more complex in reality. Mentalizing abilities are challenged differently depending on our role with the patient. In this article we explore the specifics of interdisciplinary crisis work through the lens of mentalization-based therapy.

La prise en charge hospitalière de patients traversant une crise suicidaire et souffrant d'un trouble de personnalité est complexe pour les soignants. Le modèle de soin doit être adapté et applicable par une équipe pluridisciplinaire. La charge émotionnelle de ces situations de crise rend difficile aux soignants de préserver leur capacité à traiter les états mentaux avec curiosité et sans les vivre nécessairement tels qu'ils leur apparaissent, c'est-à-dire de pouvoir mentaliser. Ainsi, un désir exprimé de mourir peut s'avérer beaucoup plus complexe en réalité. Les capacités de mentalisation sont mises à mal différemment selon notre rôle auprès du patient. Nous explorons dans cet article les spécificités du travail interdisciplinaire de crise au travers du prisme de la thérapie basée sur la mentalisation.

Formation and thermal stability of two-phase microstructures in Al-containing refractory compositionally complex alloys.

Phase separation into an A2+B2 two-phase microstructure in refractory compositionally complex alloys (RCCA) has been speculated as being spinodal in nature with continuous chemical distribution during the separation. However, these reactions might instead occur as precipitation by nucleation and growth. In order to unequivocally elucidate the distinct nature of phase separation sequence in RCCA from the system Ta-Mo-Ti-Cr-Al, atom probe tomography and electron microscopy techniques were utilized on samples that were annealed over multiple orders of magnitude in time. The composition 82(TaMoTi)-8Cr-10Al (at.%) was chosen, as it exhibits a two-phase microstructure, with a desired A2 matrix and embedded B2 phase. Quenching the samples from 1200°C resulted in a microstructure consisting of ordered clusters (2 nm) of distinct chemical composition. Subsequent annealing at 800°C to 1000°C leads to an increase in the volume fraction of the precipitating phase, which saturates after 10 h. Further annealing leads to the ripening of the microstructure; however, the absolute size of the precipitates stays <100 nm even after 1000 h. For the investigated conditions, the interface between matrix and precipitate can be considered sharp within the resolution of the applied techniques and no significant change in the transition of chemical composition across the interface is observed. Therefore, the phase separation mechanism is confirmed to be phase nucleation and growth in contrast to the possible spinodal decomposition, as hypothesized for other RCCA systems. The impact of precipitation and coarsening on the hardness of the alloy is discussed.

Outstanding Bio-Tribological Performance Induced by the Synergistic Effect of 2D Diamond Nanosheet Coating and Silk Fibroin.

Due to their excellent biocompatibility, outstanding mechanical properties, high strength-to-weight ratio, and good corrosion resistance, titanium (Ti) alloys are extensively used as implant materials in artificial joints. However, Ti alloys suffer from poor wear resistance, resulting in a considerably short lifetime. In this study, we demonstrate that the chemical self-assembly of novel two-dimensional (2D) diamond nanosheet coatings on Ti alloys combined with natural silk fibroin used as a novel lubricating fluid synergistically results in excellent friction and wear performance. Linear-reciprocating sliding tests verify that the coefficient of friction and the wear rate of the diamond nanosheet coating under silk fibroin lubrication are reduced by 54 and 98%, respectively, compared to those of the uncoated Ti alloy under water lubrication. The lubricating mechanism of the newly designed system was revealed by a detailed analysis of the involved microstructural and chemical changes. The outstanding tribological behavior was attributed to the establishment of artificial joint lubrication induced by the cross binding between the diamond nanosheets and silk fibroin. Additionally, excellent biocompatibility of the lubricating system was verified by cell viability, which altogether paves the way for the application of diamond coatings in artificial Ti joint implants.

[Good Psychiatric Management for Borderline Personality Disorder - A Specialized Treatment Applicable in General Care]. / «Good Psychiatric Management¼ pour le trouble de la personnalité borderline - Un traitement spécialisé applicable aux soins généralistes.

This article presents basic notions of "Good Psychiatric Management" (GPM) for Borderline Personality Disorder (BPD). There have been several evidence-based psychotherapeutic treatments for BPD for several decades. Nevertheless, high requirements and motivation required sometimes have a discouraging effect for trainees. GPM aims at offering «good enough¼ and less difficult to implement care. This article presents the notion of Interpersonnal Hypersensitivity and its different attachment states (attached, threatened, abandoned, and desperate) describing internal coherence of BPD and founding therapeutic interventions. GPM is principle based, thus is highly adaptable, as can be seen in integration with other intervention models or implementation of stepped care.

Cet article présente les bases du «Good Psychiatric Management¼ (GPM) pour le trouble de la personnalité borderline. Il existe pour ce trouble différents traitements psychothérapeutiques fondés sur les preuves. Les exigences importantes que ceux-ci représentent en termes de formation et de motivation ont parfois comme effet de décourager les thérapeutes en formation. Le GPM décrit des soins «suffisamment bons¼, accessibles et moins difficiles à implanter. Cet article présente le concept d'hypersensibilité interpersonnelle qui décrit la cohérence interne du trouble et fonde les interventions thérapeutiques. Le GPM est basé sur l'application de principes, ce qui lui donne une adaptabilité importante, par exemple pour l'intégration avec d'autres modèles d'intervention ou des soins par paliers.

Injection Molding of Magnesium Aluminate Spinel Nanocomposites for High-Throughput Manufacturing of Transparent Ceramics.

Transparent ceramics like magnesium aluminate spinel (MAS) are considered the next step in material evolution showing unmatched mechanical, chemical and physical resistance combined with high optical transparency. Unfortunately, transparent ceramics are notoriously difficult to shape, especially on the microscale. Therefore, a thermoplastic MAS nanocomposite is developed that can be shaped by polymer injection molding at high speed and precision. The nanocomposite is converted to dense MAS by debinding, pre-sintering, and hot isostatic pressing yielding transparent ceramics with high optical transmission up to 84 % and high mechanical strength. A transparent macroscopic MAS components with wall thicknesses up to 4 mm as well as microstructured components with single micrometer resolution are shown. This work makes transparent MAS ceramics accessible to modern high-throughput polymer processing techniques for fast and cost-efficient manufacturing of macroscopic and microstructured components enabling a plethora of potential applications from optics and photonics, medicine to scratch and break-resistant transparent windows for consumer electronics.

Replicative manufacturing of metal moulds for low surface roughness polymer replication.

Tool based manufacturing processes like injection moulding allow fast and high-quality mass-market production, but for optical polymer components the production of the necessary tools is time-consuming and expensive. In this paper a process to fabricate metal-inserts for tool based manufacturing with smooth surfaces via a casting and replication process from fused silica templates is presented. Bronze, brass and cobalt-chromium could be successfully replicated from shaped fused silica replications achieving a surface roughnesses of Rq 8 nm and microstructures in the range of 5 µm. Injection moulding was successfully performed, using a commercially available injection moulding system, with thousands of replicas generated from the same tool. In addition, three-dimensional bodies in metal could be realised with 3D-Printing of fused silica casting moulds. This work thus represents an approach to high-quality moulding tools via a scalable facile and cost-effective route surpassing the currently employed cost-, labour- and equipment-intensive machining techniques.

Role of Nitrogen and Yttrium Contents in Manufacturing (Cr, Y)Nx Film Nanostructures.

The high-power impulse magnetron sputtering (HiPIMS) technique was applied to deposit multilayer-like (Cr, Y)Nx coatings on AISI 304L stainless steel, using pendular substrate oscillation and a Cr-Y target and varying the nitrogen flow rate from 10 to 50 sccm. The microstructure, mechanical and tribological properties were investigated by scanning and transmission electron microscopy, X-ray photoelectron spectroscopy, X-ray diffraction, instrumented nano-hardness, and wear tests. The columnar grain structure became highly segmented and nanosized due to pendular substrate oscillation and the addition of yttrium. The deposition rate increased continuously with the growing nitrogen flow rate. The increase in nitrogen flow from 10 to 50 sccm increased the hardness of the coatings (Cr, Y)Nx, with a maximum hardness value of 32.7 GPa for the coating (Cr, Y)Nx with a nitrogen flow of 50 sccm, which greatly surpasses the hardness of CrN films with multilayer-like (Cr, Y)Nx coatings architecture. The best mechanical and tribological performance was achieved for a nitrogen flow rate of 50 sccm. This was enabled by more elevated compressive stresses and impact energies of the impinging ions during film growth, owing to an increase of HiPIMS peak voltage with a rising N2/Ar ratio.

Tailoring the Hybrid Magnetron Sputtering Process (HiPIMS and dcMS) to Manufacture Ceramic Multilayers: Powering Conditions, Target Materials, and Base Layers.

The mechanical and wear behavior of CrN/CrAlN multilayers were improved by tailoring the experimental conditions of a hybrid magnetron sputtering process based on a high-power impulse (HiPIMS) and two direct current magnetron sputtering (dcMS) power supplies. To this end, the influence of the base layer and of the combination of Cr and CrAl targets, which were switched to the dcMS and HiPIMS power supplies in different configurations, were investigated with respect to the growth of ceramic CrN/CrAlN multilayers onto commercial gas-nitrided diesel piston rings. The microstructure, grain morphology, and mechanical properties were evaluated by field emission scanning electron microscopy (FE-SEM), atomic force microscopy (AFM), X-ray diffraction (XRD), and instrumented nanoindentation. Bench wear tests simulating the operation of a combustion engine were conducted against a gray cast iron cylinder liner under reciprocating conditions using 0W20 oil as a lubricating agent enriched with Al2O3 particles. The results revealed a significant increase in hardness, resistance to plastic strain, and wear resistance when two CrAl targets were switched to a HiPIMS and a dcMS power supply, and a Cr target was powered by another dcMS power supply. The compressive coating stresses were slightly reduced due to the soft Cr base layer that enabled stress relief within the multilayer. The proposed concept of hybrid magnetron sputtering outperformed the commercial PVD coatings of CrN for diesel piston rings manufactured by cathodic arc evaporation.

[Crisis-MBT: Mentalization-based brief hospitalization intervention]. / TBM-Crise : intervention hospitalière brève basée sur la mentalisation.

Context Our team works in a psychiatric hospital unit at the University Hospitals of Geneva (Switzerland). We welcome there for 7 days people in crisis situations who have either suicidal thoughts or suicidal behavior. As factors precipitating the suicidal crisis, these people go through life events that are accompanied by intense interpersonal difficulties or that threaten the image they have of themselves. In our clinical population, approximately 35% of patients suffer from borderline personality disorder (BPD). In these patients, repeated crises and suicidal behavior lead to frequent and damaging relational and therapeutic ruptures. Our objective is to develop a specific approach to this clinical problem. Intervention We have developed a brief psychological intervention informed by mentalization-based treatment (MBT) in 4 stages: welcoming of the patient, affective mentalization of the crisis elements, formulation of the problem, work on discharge and the continuation of outpatient care. This intervention is suitable for a medical-nursing team. From a MBT point of view, the welcoming phase is mainly devoted to mirroring and affective regulation in order to reduce the intensity of psychic disorganization. It is then a question of activating the capacity to mentalize, namely curiosity about mental states, through work on the crisis narrative with an affective focus. We then work with people to construct a formulation of their problem in which they can assume a role. It is about making them "agents" of their crises. Then we can end the intervention by working on both the separation and a projection into the immediate future. The goal is then to extend the psychological work started in our unit at the level of an ambulatory network. The termination phase sees the attachment system reactivated and the reappearance of the difficulties hitherto outside the therapeutic space. Clinical implications MBT is effective for BPD, particularly in reducing suicidal gestures and the number of hospitalizations. We have adjusted its theoretical and clinical device for individuals hospitalized due to a suicidal crisis and who present various and comorbid psychopathological profiles. MBT allows the adaptation and evaluation of empirically based psychotherapeutic tools to different clinical settings but also to different clinical populations.

Design and Characterization of Self-Lubricating Refractory High Entropy Alloy-Based Multilayered Films.

Refractory high entropy alloys (RHEAs) have been proven to have excellent mechanical properties with a potential use as protective thin films. However, the combination of high hardness with low friction and wear is a major challenge in the design of RHEA films. In this study, we show that NbMoWTa/Ag self-lubricating multilayered films give a remarkable reduction in friction and at same time maintain high hardness. Interestingly, it is found that the bcc superlattice dominates in both NbMoWTa and Ag layers and the interfaces become coherent when the individual layer thickness h is reduced below 10 nm. The film properties are then strongly dependent on h ranging from 100 to 2.5 nm, and the most promising properties are obtained when the interface structure transforms from incoherent to coherent one. Especially, the multilayer with h = 2.5 nm exhibits superior tribological performance over monolithic NbMoWTa due to the significant coherent strengthening along with the self-lubricating ability in the multilayer. This tailored phase transition and coherent structure between the matrix and lubrication phases can also provide an optimal wear rate-coefficient of friction combination, which is higher than most of the Ag-containing self-lubricating films. The current work might open a new route toward the development of innovative self-lubricating RHEA films with excellent tribological properties.

Melt-Extrusion-Based Additive Manufacturing of Transparent Fused Silica Glass.

In recent years, additive manufacturing (AM) of glass has attracted great interest in academia and industry, yet it is still mostly limited to liquid nanocomposite-based approaches for stereolithography, two-photon polymerization, or direct ink writing. Melt-extrusion-based processes, such as fused deposition modeling (FDM), which will allow facile manufacturing of large thin-walled components or simple multimaterial printing processes, are so far inaccessible for AM of transparent fused silica glass. Here, melt-extrusion-based AM of transparent fused silica is introduced by FDM and fused feedstock deposition (FFD) using thermoplastic silica nanocomposites that are converted to transparent glass using debinding and sintering. This will enable printing of previously inaccessible glass structures like high-aspect-ratio (>480) vessels with wall thicknesses down to 250 µm, delicate parts including overhanging features using polymer support structures, as well as dual extrusion for multicolored glasses.

The Force Cone Method Applied to Explain Hidden Whirls in Tribology.

In tribologically loaded materials, folding instabilities and vortices lead to the formation of complex internal structures. This is true for geological as well as nanoscopic contacts. Classically, these structures have been described by Kelvin-Helmholtz instabilities or shear localization. We here introduce an alternative explanation based on an intuitive approach referred to as the force cone method. It is considered how whirls are situated near forces acting on a free surface of an elastic or elastoplastic solid. The force cone results are supplemented by finite element simulations. Depending on the direction of the acting force, one or two whirls are predicted by the simplified force cone method. In 3D, there is always a ring shaped whirl present. These modelling findings were tested in simple model experiments. The results qualitatively match the predictions and whirl formation was found. The force cone method and the experiments may seem trivial, but they are an ideal tool to intuitively understand the presence of whirls within a solid under a tribological load. The position of these whirls was found at the predicted places and the force cone method allows a direct approach to understand the complex processes in the otherwise buried interfaces of tribologically loaded materials.

Variations in strain affect friction and microstructure evolution in copper under a reciprocating tribological load.

The microstructure of the materials constituting a metallic frictional contact strongly influence tribological performance. Being able to tailor friction and wear is challenging due to the complex microstructure evolution associated with tribological loading. Here, we investigate the effect of the strain distribution on these processes. High-purity copper plates were morphologically surface textured with two parallel rectangles - referred to as membranes - over the entire sample length by micro-milling. By keeping the width of these membranes constant and only varying their height, reciprocating tribological loading against sapphire discs resulted in different elastic and plastic strains. Finite element simulations were carried out to evaluate the strain distribution in the membranes. It was found that the maximum elastic strain increases with decreasing membrane stiffness. The coefficient of friction decreases with increasing membrane aspect ratio. By analyzing the microstructure and local crystallographic orientation, we found that both show less change with decreasing membrane stiffness.

Tribological Performance of Additively Manufactured AISI H13 Steel in Different Surface Conditions.

Additive manufacturing of metallic tribological components offers unprecedented degrees of freedom, but the surface roughness of most as-printed surfaces impedes the direct applicability of such structures, and postprocessing is necessary. Here, the tribological performance of AISI H13 steel samples was studied. These were additively manufactured through laser powder bed fusion (L-PBF), also referred to as selective laser melting (SLM). Samples were tested in four different surface conditions: as-printed, polished, ground and polished, and laser-surface-textured (LST) with round dimples. Friction experiments were conducted in a pin-on-disk fashion against bearing steel disks under lubrication with an additive-free mineral base oil for sliding speeds between 20 and 170 mm/s. Results demonstrated that, among the four surface treatments, grinding and polishing resulted in the lowest friction coefficient, followed by the as-printed state, while both polishing alone and laser-surface texturing increased the friction coefficient. Surprisingly, direct correlation between surface roughness and friction coefficient, i.e., the rougher the surface was, the higher the friction force, was not observed. Wear was minimal in all cases and below what could be detected by gravimetrical means. These results highlight the need for an adequate post-processing treatment of additively manufactured parts that are to be employed in tribological systems.

Clinical Characteristics of Suicidal Youths and Adults: A One-Year Retrospective Study.

Suicide is a major mental health problem, particularly during youth, when it is the second leading cause of death. Since young people at risk of suicide are often cared for by the adult health system, we sought to identify the specificities and similarities between suicidal youths and adults in order to further inform the potential need for adaptations in taking care of suicidal youths. For this study, we used the following data: mental disorders, treatments, previous hospitalization, and reasons for current hospitalization, that were collected from November 2016 to October 2017 among people hospitalized for a suicidal crisis in a specialized psychiatric unit. First, we compared the data from the youth group with those from the adult group, and then we tried to determine if there were any associations between variables. Analyses showed that youths were more similar to adults than expected. In particular, we found comparable rates of personality disorders (especially borderline) and relapse, and similar profiles of reasons for hospitalization in suicidal crisis. Remarkably, among youth, neuroleptics appeared to be associated with fewer hospitalizations for behavioral than ideational reasons, but with more relapses. Results of this study suggest that young people could benefit from brief psychotherapeutic interventions implemented for adults.