Using Zeolite Materials to Remove Pharmaceuticals from Water.

Pharmaceutical drugs, including antibiotics and hormonal agents, pose a significant threat to environmental and public health due to their persistent presence in aquatic environments. Colistin (KOL), fluoxetine (FLUO), amoxicillin (AMO), and 17-alpha-ethinylestradiol (EST) are pharmaceuticals (PhCs) that frequently exceed regulatory limits in water and wastewater. Current removal methods are mainly ineffective, necessitating the development of more efficient techniques. This study investigates the use of synthetic zeolite (NaP1_FA) and zeolite-carbon composites (NaP1_C), both derived from fly ash (FA), for the removal of KOL, FLUO, AMO, and EST from aquatic environments. Batch adsorption experiments assessed the effects of contact time, adsorbent dosage, initial concentration, and pH on the removal efficiency of the pharmaceuticals. The results demonstrated that NaP1_FA and NaP1_C exhibited high removal efficiencies for all tested pharmaceuticals, achieving over 90% removal within 2 min of contact time. The Behnajady-Modirshahla-Ghanbary (BMG) kinetic model best described the adsorption processes. The most effective sorption was observed with a sorbent dose of 1-2 g L-1. Regarding removal efficiency, the substances ranked in this order: EST was the highest, followed by AMO, KOL, and FLUO. Sorption efficiency was influenced by the initial pH of the solutions, with optimal performance observed at pH 2-2.5 for KOL and FLUO. The zeolite-carbon composite NaP1_C, due to its hydrophobic nature, showed superior sorption efficiency for hydrophobic pharmaceuticals like FLUO and EST. The spectral analysis reveals that the primary mechanism for immobilizing the tested PhCs on zeolite sorbents is mainly due to physical sorption. This study underscores the potential of utilizing inexpensive, fly ash-derived zeolites and zeolite-carbon composites to remove pharmaceuticals from water effectively. These findings contribute to developing advanced materials for decentralized wastewater treatment systems, directly addressing pollution sources in various facilities.

Influence of Waste Glass Addition on the Fire Resistance, Microstructure and Mechanical Properties of Geopolymer Composites.

Nowadays, humanity has to face the problem of constantly increasing amounts of waste, which cause not only environmental pollution but also poses a critical danger to human health. Moreover, the growth of landfill sites involves high costs of establishment, development, and maintenance. Glass is one of the materials whose recycling ratio is still insufficient. Therefore, in the presented work, the influence of the particle size and share of waste glass on the consistency, morphology, specific surface area, water absorption, setting time, and mechanical properties of geopolymers was determined. Furthermore, for the first time, the fire resistance and final setting time of such geopolymer composites were presented in a wide range. Based on the obtained results, it was found that the geopolymer containing 20% unsorted waste glass obtained a final setting time that was 44% less than the sample not containing waste glass, 51.5 MPa of compressive strength (135.2% higher than the reference sample), and 13.5 MPa of residual compressive strength after the fire resistance test (164.7% more than the reference sample). Furthermore, it was found that the final setting time and the total pore volume closely depended on the additive's share and particle size. In addition, the use of waste glass characterized by larger particle sizes led to higher strength and lower mass loss after exposure to high temperatures compared to the composite containing smaller ones. The results presented in this work allow not only for reducing the costs and negative impact on the environment associated with landfilling but also for developing a simple, low-cost method of producing a modern geopolymer composite with beneficial properties for the construction industry.

Influence of Waste Glass Particle Size on the Physico-Mechanical Properties and Porosity of Foamed Geopolymer Composites Based on Coal Fly Ash.

In order to protect the environment and counteract climate change, it is necessary to take any actions that enable a reduction in CO2 emissions. One of the key areas is research focused on developing alternative sustainable materials for construction to reduce the global demand for cement. This work presents the properties of foamed geopolymers with the addition of waste glass as well as determined the optimal size and amount of waste glass for improving the mechanical and physical features of the produced composites. Several geopolymer mixtures were fabricated by replacing coal fly ash with 0%, 10%, 20%, and 30% of waste glass by weight. Moreover, the effect of using different particle size ranges of the addition (0.1-1200 µm; 200-1200 µm; 100-250 µm; 63-120 µm; 40-63 µm; 0.1-40 µm) in the geopolymer matrix was examined. Based on the results, it was found that the application of 20-30% of waste glass with a particle size range of 0.1-1200 µm and a mean diameter of 550 µm resulted in approximately 80% higher compressive strength in comparison to unmodified material. Moreover, the samples produced using the smallest fraction (0.1-40 µm) of waste glass in the amount of 30% reached the highest specific surface area (43.711 m2/g), maximum porosity (69%), and density of 0.6 g/cm3.

Erythromycin Scavenging from Aqueous Solutions by Zeolitic Materials Derived from Fly Ash.

Erythromycin (EA) is an antibiotic whose concentration in water and wastewater has been reported to be above the standard levels. Since the methods used so far to remove EA from aquatic environments have not been effective, the development of effective methods for EA removal is necessary. In the present study, fly ash (FA)-based zeolite materials, which have not been investigated as EA sorbents before, were used. The possibilities of managing waste FA and using its transformation products for EA sorption were presented. The efficiency of EA removal from experimental solutions and real wastewater was evaluated. In addition, the sorbents' mineral composition, chemical composition, and physicochemical properties and the effects of adsorbent mass, contact time, initial EA concentration, and pH on EA removal were analyzed. The EA was removed within the first 2 min of the reaction with an efficiency of 99% from experimental solutions and 94% from real wastewater. The maximum adsorption capacities were 314.7 mg g-1 for the fly ash-based synthetic zeolite (NaP1_FA) and 363.0 mg g-1 for the carbon-zeolite composite (NaP1_C). A fivefold regeneration of the NaP1_FA and NaP1_C showed no significant loss of adsorption efficiency. These findings indicate that zeolitic materials effectively remove EA and can be further investigated for removing other pharmaceuticals from water and wastewater.

Surface Modification of Synthetic Zeolites with Ca and HDTMA Compounds with Determination of Their Phytoavailability and Comparison of CEC and AEC Parameters.

Zeolites obtained from fly ash are characterized by very good anion- and cation-exchange properties and a developed porous structure. This paper presents the results of surface modification studies of synthetic zeolites obtained from calcined coal shale (clay materials). Calcium compounds and hexadecyltrimethylammonium bromide (HDTMA) were used as modifying substances. The characteristics of the raw material and the zeolite obtained as a result of its synthesis are presented. The surface modification method is described. Furthermore, the results of sorption and desorption of NO3, PO4, and SO4 from raw and modified samples are presented. The results of anion- and cation-exchange capacities for other zeolite types were also compared. Modification of the materials with Ca ions and HDTMA surfactant only improved the sorption of sulfates. The 90% desorption of nitrates, phosphates, and sulphates from the zeolite material without modification indicates a good release capacity of these compounds and their potential use as fertilizer additives.

Determination of Pollution and Environmental Risk Assessment of Stormwater and the Receiving River, Case Study of the Sudól River Catchment, Poland.

Changes in the land use of urban catchments and the discharge of stormwater to rivers are causing surface water pollution. Measurements were taken of the quality of discharged stormwater from two areas with different types of development: a residential area and a residential-commercial area, as well as the quality of the Sudól River water below the sewer outlets. The following indicators were studied: TSS, COD, N-NO3, N-NO2, TKN, TN, TP, Zn, Cu, Hg, HOI, and PAHs. The influence of land use on the magnitudes of flows in the river was modeled using the SCS-CN method and the Snyder Unit Hydrograph Model. The results showed an increase in sealing and a resulting increase in surface runoff. Concentrations of pollutants in stormwater and analysis of the potential amounts of loadings contributed by the analyzed stormwater outlets indicate that they may be responsible for the failure to meet environmental targets in the Sudól River. Environmental risk assessment shows that the aquatic ecosystem is at risk. A risk factor indicating a high risk of adverse environmental effects was determined for N-NO3, Zn, and Cu, among others.

A Review on the Application of Zeolites and Mesoporous Silica Materials in the Removal of Non-Steroidal Anti-Inflammatory Drugs and Antibiotics from Water.

Zeolites and mesoporous silica materials are effective adsorbents that can be useful for the removal of various pharmaceuticals including non-steroidal anti-inflammatory drugs and antibiotics from low-quality water. This paper summarizes the properties and basic characteristics of zeolites and mesoporous silica materials and reviews the recent studies on the efficacy of the adsorption of selected non-steroidal medicinal products and antibiotics by these adsorbents to assess the potential opportunities and challenges of using them in water treatment. It was found that the adsorption capacity of sorbents with high silica content is related to their surface hydrophobicity (hydrophilicity) and structural features, such as micropore volume and pore size, as well as the properties of the studied medicinal products. This review can be of help to scientists to develop an effective strategy for reducing the amount of these two groups of pharmaceuticals in wastewater.

An Efficacy Assessment of Phosphate Removal from Drainage Waters by Modified Reactive Material.

Phosphates may pose a threat to the aquatic ecosystem when there is a connection or a path between the soil and the aquatic ecosystem. Runoff and drainage ditches connect arable land with the waters of the receiver. Phosphates in the runoff and the ditches contribute to the negative phenomenon of surface water eutrophication. In order to prevent it, certain reactive materials are used which are capable of the selective removal of compounds by way of sorption or precipitation. Zeolites can be distinguished among the many reactive materials. Within the present analysis, the modification of a reactive material containing zeolites was carried out using calcium hydroxide solutions of different concentrations. A certain concentration of calcium hydroxide was created for use in further studies. In order to characterise the new material, an analysis was done of the chemical and mineral composition, as well as the porous texture and morphology. The efficacy of phosphate removal for its typical concentrations in drainage waters in Poland was confirmed by way of an experiment. Using a modified reactive material as an element of landscape structures may reduce the negative impact of phosphates on the quality of surface water.

Calcined Post-Production Waste as Materials Suitable for the Hydrothermal Synthesis of Zeolites.

The zeolite production process is currently being very intensively researched. Due to environmental protection, as well as issues related to the guidelines of a zero-waste economy, all activities aimed at obtaining such materials from post-processed waste are extremely important. This article presents an innovative method of utilising calcined carboniferous shale in order to produce synthetic zeolites. The raw material for testing came from two Polish hard coal mines. Both the chemical and phase composition of the coal shale were characterised. Based on the recorded thermal analysis results coupled with the mass spectrometer, the processes occurring during the heating of raw materials were interpreted and the calcination temperatures were determined. The changes in the phase composition of raw materials resulting from the calcination process used were also analysed. The heat-treated raw materials were subjected to the synthesis of zeolites in an aqueous solution of sodium hydroxide by means of the hydrothermal method at a concentration of 2.75 M. The results of water leaching and structural parameters are presented for both raw materials, as well as the produced synthesis. The conducted research confirmed that after the application of the synthetic process on coal shale, a zeolite with a surface area of SBET equal to 172 m2/g can be obtained.