Femtosecond Laser Texturing of Surfaces for Tribological Applications.

Laser texturing is an emerging technology for generating surface functionalities on basis of optical, mechanical, or chemical properties. Taking benefit of laser sources with ultrashort (fs) pulse durations features outstanding precision of machining and negligible rims or burrs surrounding the laser-irradiation zone. Consequently, additional mechanical or chemical post-processing steps are usually not required for fs-laser surface texturing (fs-LST). This work aimed to provide a bridge between research in the field of tribology and laser materials processing. The paper reviews the current state-of-the-art in fs-LST, with a focus on the tribological performance (friction and wear) of specific self-organized surface structures (so-called ripples, grooves, and spikes) on steel and titanium alloys. On the titanium alloy, specific sickle-shaped hybrid micro-nanostructures were also observed and tribologically tested. Care is taken to identify accompanying effects affecting the materials hardness, superficial oxidation, nano- and microscale topographies, and the role of additives contained in lubricants, such as commercial engine oil.

Focal adhesion contact formation by fibroblasts cultured on surface-modified dental implants: an in vitro study.

A major consideration in designing dental implants is to create a surface that provides strong attachment of the implant to bone, connective tissue and epithelium. The aim of the present study was to examine the influence of different treatments of titanium (Ti) implant surfaces on focal adhesion contact (FAC) formation in fibroblast cultures. Human gingival fibroblasts were cultured on glass sheets and polished Ti discs with different surface coatings (applied by physical vapor deposition (PVD): Ti, titanium nitride (TiN), zirconium nitride (ZrN)) or on Ti discs with different surface topographies. For characterization of all surfaces, modified estimation of surface roughness and spacing parameter was carried out using a contact stylus profilometer. Contact angle measurements were carried out to calculate surface energy. Fibroblasts were prepared for transmission electron microscopy at day 3 after seeding, and the number of FACs and the ratio FAC/cellular cross-sections was determined at a length of 300 microm in ultrathin sections. To visualize the extracellular fibronectin and vitronectin molecules and the intracellular actin and vinculin in FAC areas, immunogold labeling was performed. The results revealed a strong correlation between the number of FACs and the surface roughness. The highest number of FACs and the majority of the immunogold-labeled intra- and extracellular matrix molecules were counted on surfaces with the lowest surface roughness: glass sheets coated with either Ti, TiN or ZrN (roughness average=0.03-0.1 microm). These surfaces appear to favor cellular attachment of human gingival fibroblasts and moreover in previous studies the hard coatings have been shown to reduce bacterial adhesion.

The determination of the efficiency of energy dispersive X-ray spectrometers by a new reference material.

A calibration procedure for the detection efficiency of energy dispersive X-ray spectrometers (EDS) used in combination with scanning electron microscopy (SEM) for standardless electron probe microanalysis (EPMA) is presented. The procedure is based on the comparison of X-ray spectra from a reference material (RM) measured with the EDS to be calibrated and a reference EDS. The RM is certified by the line intensities in the X-ray spectrum recorded with a reference EDS and by its composition. The calibration of the reference EDS is performed using synchrotron radiation at the radiometry laboratory of the Physikalisch-Technische Bundesanstalt. Measurement of RM spectra and comparison of the specified line intensities enables a rapid efficiency calibration on most SEMs. The article reports on studies to prepare such a RM and on EDS calibration and proposes a methodology that could be implemented in current spectrometer software to enable the calibration with a minimum of operator assistance.

Do different implant surfaces exposed in the oral cavity of humans show different biofilm compositions and activities?

Osseointegrated dental implants play an important role in restorative dentistry. However, plaque accumulation may cause inflammatory reactions around the implants, sometimes leading to implant failure. In this in vivo study the influence of two physical hard coatings on bacterial adhesion was examined in comparison with a pure titanium surface. Thin glass sheets coated with titanium nitride (TiN), zirconium nitride (ZrN) or pure titanium were mounted on removable intraoral splints in two adults. After 60 h of intraoral exposure, the biofilms were analyzed to determine the number of bacteria, the types of bacteria [by applying single-strand conformation polymorphism (SSCP analysis) of 16S rRNA genes], and whether or not the bacteria were active (by SSCP analysis of 16S rRNA). The results showed that bacterial cell counts were higher on the pure titanium-coated glass sheets than on the glass sheets coated with TiN or ZrN. The lowest number of bacterial cells was present on theZrN-coated glass. However, the metabolic activity (RNA fingerprints) of bacteria on TiN- and ZrN-coated glass sheets seemed to be lower than the activity of bacteria on the titanium-coated surfaces, whereas SSCP fingerprints based on 16S rDNA revealed that the major 16S bands are common to all of the fingerprints, independently of the surface coating.

Fibroblast growth on surface-modified dental implants: an in vitro study.

A major consideration in designing dental implants is the creation of a surface that provides strong attachment between the implant and bone, connective tissue, or epithelium. In addition, it is important to inhibit the adherence of oral bacteria on titanium surfaces exposed to the oral cavity to maintain plaque-free implants. Previous in vitro studies have shown that titanium implant surfaces coated with titanium nitride (TiN) reduced bacterial colonization compared to other clinically used implant surfaces. The aim of the present study was to examine the support of fibroblast growth by a TiN surface that has antimicrobial characteristics. Mouse fibroblasts were cultured on smooth titanium discs that were either magnetron-sputtered with a thin layer of titanium nitride, thermal oxidized, or modified with laser radiation (using a Nd-YAG laser). The resulting surface topography was examined by scanning electron microscopy (SEM), and surface roughness was estimated using a two-dimensional contact stylus profilometer. A protein assay (BCA assay) and a colorimetric assay to examine fibroblast metabolism (MTT) were used. Cellular morphology and cell spreading were analyzed using SEM and fluorescence microscopy. Fibroblasts on oxidized titanium surfaces showed a more spherical shape, whereas cells on laser-treated titanium and on TiN appeared intimately adherent to the surface. The MTT activity and total protein were significantly increased in fibroblasts cultured on titanium surfaces coated with TiN compared to all other surface modifications tested. This study suggests that a titanium nitride coating might be suitable to support tissue growth on implant surfaces.