From energy to electron transfer photocatalysis (PenT → PET): oxidative cyclobutane cleavage alters the product composition.

Photocatalytic [2+2]-cycloadditions between cyclic enones and electron-rich cyclic enol ethers are initiated by triplet-triplet energy transfer from an excited iridium photocatalyst to the enone acceptor. The composition of the resulting cycloadduct mixture shows a surprising time dependency of the cyclobutane stereoisomeric ratio which indicates that the products are not photostable under the reaction conditions. The isomerisation of the cycloadducts 3 by a photoinduced redox process points to a switch from triplet energy transfer (PenT) to photoinduced electron transfer (PET) catalysis.

Photosensitized [2 + 2]-Cycloaddition of Complex Acceptor-Donor Combinations: A Regio/Diastereoselectivity Study.

The photosensitized [2 + 2]-cycloaddition of chalcones, conjugated cyclopentenones, and cyclohexenones with electron-rich alkenes such as cyclic enolethers and polymethylated alkenes was investigated. While cyclic enones showed high regio- and stereoselectivity, acyclic enones resulted in a more complex product mixture containing dimers as well as four dominant regio- and diastereoisomers. This complex product mixture can be controlled by adjusting the reaction conditions such as sensitizer, solvents, or additives.

Awakening a Molecular Mummy: The Inter-and Intramolecular Photochemistry of Pyromellitic Diimides with Alkyl Carboxylates.

Pyromellitic acid diimides are not as chemically unreactive as conjecturable (and presupposed) from their numerous applications as electron acceptor units or electron carriers in molecular donor-acceptor dyads or triads. Similar to the corresponding phthalimides, electronically excited pyromellitic diimides oxidize alkyl carboxylates in aqueous solution via intermolecular electron transfer (PET) processes, which eventually results in radical-radical combination products, e.g., the benzylation product 6 from N,N'-dimethyl pyromellitic diimide 5. The analogous product 7 was formed with pivalic acid as tert-butyl radical source. One additional product 8 was isolated from alkylation/dearomatization and multiple radical additions, respectively, after prolonged irradiation. In intramolecular versions, from N-carboxyalkylated pyromellitic diimides 9a-e (C1 to C5-spaced), degradation processes were detected, e.g., the cyclization products 10 from the GABA substrate 9c. In sharp contrast to phthalimide photochemistry, the green pyromellitic diimide radical anion was detected here by UV-vis absorption (λabs = 720 nm), EPR (from 9d), and NMR spectroscopy for several intramolecular electron transfer examples. Only the yellow 1,4-quinodial structure is formed from intermolecular PET, which was deduced from the absorption spectra (λabs = 440 nm) and the subsequent chemistry. The pyromellitimide radical anion lives for hours at room temperature in the dark, but is further degraded under photochemical reaction conditions.

Spin Photochemistry: Electron Spin Multiplicity as a Tool for Reactivity and Selectivity Control.

Spin chemistry involving small organic molecules without heavy atoms is highly sensitive to spin-orbit-coupling (SOC) modulating biradical conformation as well as hyperfine coupling (HFC) modulating magnetic isotope interactions. Several easily available reaction properties such as chemo-, regio-, and diastereoselectivity as well as quantum yields serve as analytical tools to follow intersystem crossing (ISC) dynamics and allow titrating spin selectivities.

New Photochromic α-Methylchalcones Are Highly Photostable, Even under Singlet Oxygen Conditions: Breaking the α-Methyl Michael-System Reactivity by Reversible Peroxybiradical Formation.

The α-methylated chalcones 7a-7e behave as P-type photochromic substances with photo-stationary states (PSS) as high as 15:85 when irradiated at 350 nm. These compounds are easily accessible in pure E-configuration by aldol condensation or by oxidative coupling/elimination. The α-methyl groups make these compounds potentially reactive with singlet oxygen following the gem-rule that predicts 1O2 regioselectivity. Even after long irradiations times in the presence of the singlet oxygen sensitizer tetraphenylporphyrin (TPP) and oxygen, however, no oxygenation products were detected. Under these conditions, all substrates were converted into 9:1 E/Z-mixtures despite the use of low-energy light that does not allow direct or sensitized excitation of the substrates 7. Additionally, chalcone 7a reduced the singlet oxygen reactivity of the tiglic ketone 3a by about a factor of two, indicating substantial physical quenching of singlet oxygen by the α-methylated chalcones 7a-7e. Thus, a singlet oxygen-induced E/Z-isomerization involving 1,2-dioxatetra-methylene biradicals that leads to triplet oxygen and thermodynamic E/Z-mixtures is postulated and supported by quantum chemical (DFT)-calculations.

From 3D to 4D printing: a reactor for photochemical experiments using hybrid polyurethane acrylates for vat-based polymerization and surface functionalization.

The vat-based 3D printing of a chemical reactor with flow-meter geometry from an isocyanate-functionalized acrylate monomer followed by post-processing with amino-functionalized photocatalysts is described. This approach results in solvent- and air-stable flow photochemical reactors with UV-A transparent windows that can be applied for photooxygenation and photo redox catalysis.

Hydrogen Peroxide Sensors Based on Fluorescence Quenching of the 2-AminobenzimidazoleFluorophore.

The fluorescence emission of the parent 2-aminobenzimidazole (ABZ, 1), the mono- and disubstituted derivatives (2, 3), 2-aminonaphthoimidazole (4), and 4-amino dinaphthodiazepine 5 (λem = 315-400 nm) is strongly quenched in the presence of aqueous hydrogen peroxide. The quenching process is dual: for diazepine 5, quenching is dynamic at lower H2O2 concentrations with linear reduction of the fluorescence lifetime from 4.3 to 2.6 ns. At higher H2O2 concentrations, a second species appears in the absorption and emission spectra with fluorescence lifetimes of 1.3 ns, indicating the formation of a new (ground-state) hydrogen-bonded ABZ-H2O2 complex (static quenching). Sensors 1 and 2 show also dual quenching that fits with a static 1:1 and 1:2 model with K1:1 = 8(11) M-1 and K1:2 = 21(147) M-1 for 1(2). The formation of a 1:2 complex (1:(H2O2)2) is also supported by density functional theory (DFT) calculations and spectra simulations.

Spirofused and Annulated 1,2,4-Trioxepane-, 1,2,4-Trioxocane-, and 1,2,4-Trioxonane-Cyclohexadienones: Cyclic Peroxides with Unusual Ring Conformation Dynamics.

C3- or C4-hydroxyalkylated phenols are highly reactive towards peroxidation with oxone, which results in the formation of tertiary C3 hydroperoxides. This reaction can also be performed with photochemically generated singlet oxygen. However, other characteristic singlet oxygen reactions do not proceed with caroate. The initially formed hydroperoxides cyclize in the presence of a Lewis acid catalyst based on boron, indium, or iron to give spiroannulated peroxides. These exhibit restricted ring inversion whereas larger nine-membered-ring peroxides are thermally less stable and show higher ring flexibility (according to NMR analysis).

Electrochemiluminescence Bioassays with a Water-Soluble Luminol Derivative Can Outperform Fluorescence Assays.

The most efficient and commonly used electrochemiluminescence (ECL) emitters are luminol, [Ru(bpy)3 ]2+ , and derivatives thereof. Luminol stands out due to its low excitation potential, but applications are limited by its insolubility under physiological conditions. The water-soluble m-carboxy luminol was synthesized in 15 % yield and exhibited high solubility under physiological conditions and afforded a four-fold ECL signal increase (vs. luminol). Entrapment in DNA-tagged liposomes enabled a DNA assay with a detection limit of 3.2 pmol L-1 , which is 150 times lower than the corresponding fluorescence approach. This remarkable sensitivity gain and the low excitation potential establish m-carboxy luminol as a superior ECL probe with direct relevance to chemiluminescence and enzymatic bioanalytical approaches.

Synthetic Approaches to Mono- and Bicyclic Perortho-Esters with a Central 1,2,4-Trioxane Ring as the Privileged Lead Structure in Antimalarial and Antitumor-Active Peroxides and Clarification of the Peroxide Relevance.

The synthesis of 4-styryl-substituted 2,3,8-trioxabicyclo[3.3.1]nonanes, peroxides with the core structure of the bioactive 1,2,4-trioxane ring, was conducted by a multistep route starting from the aryl methyl ketones 1a-1c. Condensation and reduction/oxidation delivered enals 4a-4c that were coupled with ethyl acetate and reduced to the 1,3-diol substrates 6a-6c. Highly diastereoselective photooxygenation delivered the hydroperoxides 7a-7c and subsequent PPTS (pyridinium-p-toluenesulfonic acid)-catalyzed peroxyacetalization with alkyl triorthoacetates gave the cyclic peroxides 8a-8e. These compounds in general show only moderate antimalarial activities. In order to extend the repertoire of cyclic peroxide structure, we aimed for the synthesis of spiro-perorthocarbonates from orthoester condensation of ß-hydroxy hydroperoxide 9 but could only realize the monocyclic perorthocarbonate 10. That the central peroxide moiety is the key structural motif in anticancer active GST (glutathione S-transferase)-inhibitors was elucidated by the synthesis of a 1,3-dioxane 15-with a similar substitution pattern as the pharmacologically active peroxide 11-via a singlet oxygen ene route from the homoallylic alcohol 12.

Multidimensional monitoring of anaerobic/aerobic azo dye based wastewater treatments by hyphenated UPLC-ICP-MS/ESI-Q-TOF-MS techniques.

Sulfonated reactive azo dyes, such as Reactive Orange 107, are extensively used in textile industries. Conventional wastewater treatment systems are incapable of degrading and decolorizing reactive azo dyes completely from effluents, because of their stability and resistance to aerobic biodegradation. However, reactive azo dyes are degradable under anaerobic conditions by releasing toxic aromatic amines. To clarify reaction mechanisms and the present toxicity, the hydrolyzed Reactive Orange 107 was treated in anaerobic-aerobic two-step batch experiments. Sulfonated transformation products were identified employing coupled ICP-MS and Q-TOF-MS measurements. Suspected screening lists were generated using the EAWAG-BBD. The toxicity of the reactor content was determined utilizing online measurements of the inhibition of Vibrio fischeri. The OCHEM web platform for environmental modeling was instrumental in the estimations of the environmental impact of generated transformation products.

Combined Photoredox and Lewis Acid Catalyzed α-Hydroxyalkylation of Cyclic Ethers with Aromatic Ketones.

The photochemically induced coupling of aromatic ketones with cyclic ethers such as tetrahydrofuran, tetrahydropyran, and 1,4-dioxane was studied. Direct photolysis of the substrates with UV-A light centered at 350 nm does not lead to photoinduced hydrogen transfer whereas the addition of a mixture of the Lewis acid catalysts Ti(O(i)Pr)4 and BF3 enables the formation of the hydroxyalkylation products.

Steric Enhancement of the Chemiluminescence of Luminols.

A surprising 20-fold increase in chemiluminescence efficiency was observed for dialkyl luminol derivatives in comparison with the parent compound. This effect could be a direct consequence of steric gearing which facilitates the transition from the intermediate endoperoxide to the electronically excited phthalate. Mechanistic aspects of this process have been supported by computational calculations (CASPT2//CASSCF).

Selective inhibitors of glutathione transferase P1 with trioxane structure as anticancer agents.

The response to chemotherapy in cancer patients is frequently compromised by drug resistance. Although chemoresistance is a multifactorial phenomenon, many studies have demonstrated that altered drug metabolism through the expression of phase II conjugating enzymes, including glutathione transferases (GSTs), in tumor cells can be directly correlated with resistance against a wide range of marketed anticancer drugs. In particular, overexpression of glutathione transferase P1 (GSTP1) appears to be a factor for poor prognosis during cancer therapy. Former and ongoing clinical trials have confirmed GSTP1 inhibition as a principle for antitumor therapy. A new series of 1,2,4-trioxane GSTP1 inhibitors were designed via a type II photooxygenation route of allylic alcohols followed by acid-catalyzed peroxyacetalization with aldehydes. A set of novel inhibitors exhibit low micromolar to high nanomolar inhibition of GSTP1, revealing preliminary SAR for further lead optimization. Importantly, high selectivity over another two human GST classes (GSTA1 and GSTM2) has been achieved. The trioxane GSTP1 inhibitors may therefore serve as a basis for the development of novel drug candidates in overcoming chemoresistance.

Homogeneous and heterogeneous photoredox-catalyzed hydroxymethylation of ketones and keto esters: catalyst screening, chemoselectivity and dilution effects.

The homogeneous titanium- and dye-catalyzed as well as the heterogeneous semiconductor particle-catalyzed photohydroxymethylation of ketones by methanol were investigated in order to evaluate the most active photocatalyst system. Dialkoxytitanium dichlorides are the most efficient species for chemoselective hydroxymethylation of acetophenone as well as other aromatic and aliphatic ketones. Pinacol coupling is the dominant process for semiconductor catalysis and ketone reduction dominates the Ti(OiPr)4/methanol or isopropanol systems. Application of dilution effects on the TiO2 catalysis leads to an increase in hydroxymethylation at the expense of the pinacol coupling.

Ene-diene transmissive cycloaddition reactions with singlet oxygen: the vinylogous gem effect and its use for polyoxyfunctionalization of dienes.

The singlet oxygen reactivities and regioselectivities of the model compounds 1b-d were compared with those of the geminal (gem) selectivity model ethyl tiglate (1a). The kinetic cis effect is k(E)/k(Z) = 5.2 for the tiglate/angelate system 1a/1a' without a change in the high gem regioselectivity. Further conjugation to vinyl groups enabled mode-selective processes, namely, [4 + 2] cycloadditions versus ene reactions. The site-specific effects of methylation on the mode selectivity and the regioselectivity of the ene reaction were studied for dienes 1e-g. A vinylogous gem effect was observed for the γ,δ-dimethylated and α,γ,δ-trimethylated substrates 1h and 1i, respectively. The corresponding phenylated substrates 1j-l showed similar mode selectivity, as monomethylated 1j exhibited exclusively [4 + 2] reactivity while the tandem products 12 and 14 were isolated from the di- and trimethylated substrates 1k and 1l, respectively. The vinylogous gem effect favors the formation of 1,3-dienes from the substrates, and thus, secondary singlet oxygen addition was observed to give hydroperoxy-1,2-dioxenes 19 and 20 in an ene-diene transmissive cycloaddition sequence. These products were reduced to give alcohols (16, 17, and 18) or furans (24 and 25), respectively, or treated with titanium(IV) alkoxides to give the epoxy alcohols 26 and 27. The vinylogous gem effect is rationalized by DFT calculations showing that biradicals are the low-energy intermediates and that no reaction path bifurcations compete.

A new directing mode for singlet oxygen ene reactions: the vinylogous gem effect enables a 1O2 domino ene/[4 + 2] process.

The singlet oxygen reactions of 4-methyl-2,4-hexadienoates E,E- and E,Z-4 proceed in a highly mode selective and regioselective domino process. The initial product is the allylic hydroperoxide 5 directed by a vinylogous gem effect. The subsequent (1)O2 [4 + 2] cycloaddition delivers a 3:2 diastereoisomeric mixture of 1,2-dioxanes 8 in a one-pot process. The identical protocol delivers from the more reactive α-methylated substrates E,E-10 and E,Z-10 with excellent primary regioselectivity the 1,2-dioxane 13.

Singlet oxygen photo-oxygenation in water/pluronic F-127 hydrogels: increased reaction efficiency coupled with a switch in regioselectivity.

Pluronic F-127 hydrogels are highly efficient microenvironments for photochemical reactions, as demonstrated for singlet oxygen reactions of monoalkenes. Nonpolar substrates are localized in the nanosized polymer compartment, which can be visualized by neutron scattering. The efficiency of (1)O(2) reactions is strongly increased for tiglate derivatives and the regioselectivity of the ene reaction of trisubstituted alkenes is completely switched in comparison with solution phase and inverted in comparison with intrazeolite photo-oxygenations.

Aromatic aldols and 1,5-diketones as optimized fragrance photocages.

Aromatic aldols and 1,5-diketones with abstractable γ-hydrogen atoms are highly photoactive cage molecules for the release of fragrance carbonyl compounds (aldehydes and Michael ketones, respectively). Aldols 3a-d are easily accessible by Mukaiyama addition and are cleaved to form the substrates with high quantum yields under solar radiation. By tuning the properties of the chromophores, a series of δ-damascone cages 5 were developed that can be used for selective and fast (5a,e) or slow (5b,d) release of fragrances under air and solar irradiation. The intermediates of the Norrish II process were observed by laser transient absorption spectroscopy.