Revealing the Chemistry and Morphology of Buried Donor/Acceptor Interfaces in Organic Photovoltaics.

With power conversion efficiencies (PCEs) of <13% and plagued by stability issues, organic photovoltaics (OPVs) still lack wide adoption, despite significant recent advances. Currently, the most progress in OPV device performance is achieved by "trial-and-error" preparation procedures that lead to complex and largely unknown-despite tremendous analytical efforts-morphologies. Here, we demonstrate a proof-of-principle, chemical imaging methodology that combines experimental high spatial sensitivity and chemical selectivity with theoretical modeling, capable of analyzing the three-dimensional composition and morphology of virtually any device. Allowing the precise measurement of composition and direct visualization of film morphology with depth, our approach reveals the intricate buried donor/acceptor (D/A) interface of a model polymer/fullerene system, poly(3-hexylthiphene-2,5-diyl)/[6,6]-phenyl-C61-butyric acid methyl ester (P3HT/PCBM). In particular, our technique is able to identify and quantify the D/A interface length, that is, the extent of molecular mixing at the D/A interface, a parameter crucial for device performance, yet never measured. Extracting this parameter allows demonstrating that, contrary to the general understanding, when starting with a fully mixed D/A phase in our model system, thermal annealing, which is known to substantially (however limited) increase the device performance by phase segregation, does not create but small amounts of pure phases, leaving the device mostly mixed, which limits the performance improvement.

Reversible and Irreversible Electric Field Induced Morphological and Interfacial Transformations of Hybrid Lead Iodide Perovskites.

We report reversible and irreversible strain effects and interfacial atomic mixing in MAPbI3/ITO under influence of external electric bias and photoillumination. Using conductive-probe atomic force microscopy, we locally applied a bias voltage between the MAPbI3/ITO and the conductive tip and observed local dynamic strain effects and current under conditions of forward bias. We found that the reversible part of the strain is associated with a current spike at the current onset stage and can therefore be related to an electrochemical process accompanied by local molar volume change. Similar partly reversible surface deformation was observed when the tip-sample contact was illuminated by light. Time-of-flight secondary ion mass spectrometry of electrically biased regions revealed massive atomic mixing at the buried MAPbI3/ITO interface, while the top MAPbI3 surface, subjected to strong morphological damage at the tip-surface contact, revealed less significant chemical decomposition.