Decrease of ESKAPE virulence with a cationic heme-mimetic gallium porphyrin photosensitizer: The Trojan horse strategy that could help address antimicrobial resistance.

INTRODUCTION: Emerging antibiotic resistance among bacterial pathogens has forced an urgent need for alternative non-antibiotic strategies development that could combat drug resistant-associated infections. Suppression of virulence of ESKAPE pathogens' by targeting multiple virulence traits provides a promising approach. OBJECTIVES: Here we propose an iron-blocking antibacterial therapy based on a cationic heme-mimetic gallium porphyrin (GaCHP), which antibacterial efficacy could be further enhanced by photodynamic inactivation. METHODS: We used gallium heme mimetic porphyrin (GaCHP) excited with light to significantly reduce microbial viability and suppress both the expression and biological activity of several virulence traits of both Gram-positive and Gram-negative ESKAPE representatives, i.e., S. aureus and P. aeruginosa. Moreover, further improvement of the proposed strategy by combining it with routinely used antimicrobials to resensitize the microbes to antibiotics and provide enhanced bactericidal efficacy was investigated. RESULTS: The proposed strategy led to substantial inactivation of critical priority pathogens and has been evidenced to suppress the expression and biological activity of multiple virulence factors in S. aureus and P. aeruginosa. Finally, the combination of GaCHP phototreatment and antibiotics resulted in promising strategy to overcome antibiotic resistance of the studied microbes and to enhance disinfection of drug resistant pathogens. CONCLUSION: Lastly, considering high safety aspects of the proposed treatment toward host cells, i.e., lack of mutagenicity, no dark toxicity and mild phototoxicity, we describe an efficient alternative that simultaneously suppresses the functionality of multiple virulence factors in ESKAPE pathogens.

Can antimicrobial blue light contribute to resistance development? Genome-wide analysis revealed aBL-protective genes in Escherichia coli.

IMPORTANCE: Increasing antibiotic resistance and the lack of new antibiotic-like compounds to combat bacterial resistance are significant problems of modern medicine. The development of new alternative therapeutic strategies is extremely important. Antimicrobial blue light (aBL) is an innovative approach to combat multidrug-resistant microorganisms. aBL has a multitarget mode of action; however, the full mechanism of aBL antibacterial action requires further investigation. In addition, the potential risk of resistance development to this treatment should be considered.

Photoactivated Gallium Porphyrin Reduces Staphylococcus aureus Colonization on the Skin and Suppresses Its Ability to Produce Enterotoxin C and TSST-1.

Staphylococcus aureus is a key pathogen in atopic dermatitis (AD) pathogenicity. Over half of AD patients are carriers of S. aureus. Clinical isolates derived from AD patients produce various staphylococcal enterotoxins, such as staphylococcal enterotoxin C or toxic shock syndrome toxin. The production of these virulence factors is correlated with more severe AD. In this study, we propose cationic heme-mimetic gallium porphyrin (Ga3+CHP), a novel gallium metalloporphyrin, as an anti-staphylococcal agent that functions through dual mechanisms: a light-dependent mechanism (antimicrobial photodynamic inactivation, aPDI) and a light-independent mechanism (suppressing iron metabolism). Ga3+CHP has two additive quaternary ammonium groups that increase its water solubility. Furthermore, Ga3+CHP is an efficient generator of singlet oxygen and can be recognized by heme-target systems such as Isd, which improves the intracellular accumulation of this compound. Ga3+CHP activated with green light effectively reduced the survival of clinical S. aureus isolates derived from AD patients (>5 log10 CFU/mL) and affected their enterotoxin gene expression. Additionally, there was a decrease in the biological functionality of studied toxins regarding their superantigenicity. In aPDI conditions, there was no pronounced toxicity in HaCaT keratinocytes with both normal and suppressed filaggrin gene expression, which occurs in ∼50% of AD patients. Additionally, no mutagenic activity was observed. Green light-activated gallium metalloporphyrins may be a promising chemotherapeutic to reduce S. aureus colonization on the skin of AD patients.

Antimicrobial Photodynamic Inactivation: An Alternative for Group B Streptococcus Vaginal Colonization in a Murine Experimental Model.

BACKGROUND: Streptococcus agalactiae, referred to as Group B Streptococcus (GBS), is a prominent bacterium causing life-threatening neonatal infections. Although antibiotics are efficient against GBS, growing antibiotic resistance forces the search for alternative treatments and/or prevention approaches. Antimicrobial photodynamic inactivation (aPDI) appears to be a potent alternative non-antibiotic strategy against GBS. METHODS: The effect of rose bengal aPDI on various GBS serotypes, Lactobacillus species, human eukaryotic cell lines and microbial vaginal flora composition was evaluated. RESULTS: RB-mediated aPDI was evidenced to exert high bactericidal efficacy towards S. agalactiae in vitro (>4 log10 units of viability reduction for planktonic and >2 log10 units for multispecies biofilm culture) and in vivo (ca. 2 log10 units of viability reduction in mice vaginal GBS colonization model) in microbiological and metagenomic analyses. At the same time, RB-mediated aPDI was evidenced to be not mutagenic and safe for human vaginal cells, as well as capable of maintaining the balance and viability of vaginal microbial flora. CONCLUSIONS: aPDI can efficiently kill GBS and serve as an alternative approach against GBS vaginal colonization and/or infections.

Post grafted gallic acid to chitosan-Ag hybrid nanoparticles via free radical-induced grafting reactions.

The present study proposes two unique systems using free radical-induced grafting reactions to combine Ag, chitosan (CS) and gallic acid (GA) into a single particulate nanostructure. GA-grafted-CS (GA-g-CS) was used to reduce Ag+ to Ag0, and producing Ag-GA-g-CSNPs (hybrid NPs I). Also, GA was grafted into CS-AgNPs, to form GA-g-CS AgNPs (hybrid NPs II). Although there were previous attempts to graft GA into CS, this is first time to graft GA into CS-AgNPs. The study aimed to enhance biocompatibility, antibacterial and antioxidant properties of CS-AgNPs via grafted GA. Grafting GA into CS-AgNPs was confirmed by UV-Vis, DLS, DSC/TGA, XRD, EDX and FTIR. The morphology and size of NPs were studied by TEM and SEM. The decrease of ζ-potential from +50 mV in CS-Ag NPs to +33 and + 29 mV, in the presented 2 nanoforms hybrid NPs I and II, respectively, is an indication for the successful GA graft. Among all samples, hybrid NPs II showed lower toxicity, higher antioxidant and antibacterial activity. The obtained results revealed that grafting GA to CS-AgNPs, as a new method to combine Ag, CS and GA in a uniparticulate structure, is a unique process which may deserve a more future consideration.

Priming effect with photoinactivation against extensively drug-resistant Enterobacter cloacae and Klebsiella pneumoniae.

In this study, we present antimicrobial blue light (aBL) and antimicrobial photoinactivation with green light in the presence of Rose Bengal (aPDI) to modulate the susceptibility of extensively drug-resistant (XDR) Enterobacter cloacae and Klebsiella pneumoniae clinical isolates to antimicrobials. This process can be considered a photodynamic priming tool that influences other therapeutic options, such as antibiotics. The current study evaluated the different environments to estimate the most effective priming conditions by testing a broad spectrum of antimicrobials (including antimicrobials with different targets and mechanisms of action). The susceptibility of the E. cloacae and K. pneumoniae clinical isolates to various antibiotics after aBL and green light (with rose bengal) as aPDI treatment was examined with multiple methods of synergy testing (e.g., diffusion methods, checkerboard assay, postantibiotic effect), and most effective photoinactivation conditions were implemented for each environment. When Enterobacteriaceae were exposed to aBL, the most efficient reduction in survival rate under TSB conditions was observed. Similar results were observed when rose bengal, as a photosensitizer, was present during the exposure to green light in PBS. aBL and aPDI led to an increased susceptibility of K. pneumoniae and E. cloacae isolates to chloramphenicol and colistin or fosfomycin and colistin antibiotics, respectively. However, among the 4 tested isolates, we observed synergies between different antimicrobial agents and photoinactivation conditions. Thus, it may suggest that the sensitization process may be considered a strain dependent priming tool.

Combined Antimicrobial Blue Light and Antibiotics as a Tool for Eradication of Multidrug-Resistant Isolates of Pseudomonas aeruginosa and Staphylococcus aureus: In Vitro and In Vivo Studies.

Increased development of resistance to antibiotics among microorganisms promotes the evaluation of alternative approaches. Within this study, we examined the efficacy of antimicrobial blue light (aBL) with routinely used antibiotics against multidrug-resistant isolates of Pseudomonas aeruginosa and Staphylococcus aureus as combined alternative treatment. In vitro results of this study confirm that both S. aureus and P. aeruginosa can be sensitized to antibiotics, such as chloramphenicol, linezolid, fusidic acid or colistin, fosfomycin and ciprofloxacin, respectively. The assessment of increased ROS production upon aBL exposure and the changes in cell envelopes permeability were also goals that were completed within the current study. Moreover, the in vivo experiment revealed that, indeed, the synergy between aBL and antibiotic (chloramphenicol) occurs, and the results in the reduced bioluminescence signal of the S. aureus Xen31 strain used to infect the animal wounds. To conclude, we are the first to present the possible mechanism explaining the observed synergies among photoinactivation with blue light and antibiotics in the term of Gram-positive and Gram-negative representatives.

Dual Spinneret Electrospun Polyurethane/PVA-Gelatin Nanofibrous Scaffolds Containing Cinnamon Essential Oil and Nanoceria for Chronic Diabetic Wound Healing: Preparation, Physicochemical Characterization and In-Vitro Evaluation.

In this study, a dual spinneret electrospinning technique was applied to fabricate a series of polyurethane (PU) and polyvinyl alcohol-gelatin (PVA/Gel) nanofibrous scaffolds. The study aims to enhance the properties of PU/PVA-Gel NFs loaded with a low dose of nanoceria through the incorporation of cinnamon essential oil (CEO). The as-prepared nCeO2 were embedded into the PVA/Gel nanofibrous layer, where the cinnamon essential oil (CEO) was incorporated into the PU nanofibrous layer. The morphology, thermal stability, mechanical properties, and chemical composition of the produced NF mats were investigated by STEM, DSC, and FTIR. The obtained results showed improvement in the mechanical, and thermal stability of the dual-fiber scaffolds by adding CEO along with nanoceria. The cytotoxicity evaluation revealed that the incorporation of CEO to PU/PVA-Gel loaded with a low dose of nanoceria could enhance the cell population compared to using pure PU/PVA-Gel NFs. Moreover, the presence of CEO could inhibit the growth rate of S. aureus more than E. coli. To our knowledge, this is the first time such nanofibrous membranes composed of PU and PVA-Gel have been produced. The first time was to load the nanofibrous membranes with both CEO and nCeO2. The obtained results indicate that the proposed PU/PVA-Gel NFs represent promising platforms with CEO and nCeO2 for effectively managing diabetic wounds.

Can Gram-Negative Bacteria Develop Resistance to Antimicrobial Blue Light Treatment?

Antimicrobial blue light (aBL) treatment is considered low risk for the development of bacterial resistance and tolerance due to its multitarget mode of action. The aim of the current study was to demonstrate whether tolerance development occurs in Gram-negative bacteria. We evaluated the potential of tolerance/resistance development in Escherichia coli, Klebsiella pneumoniae, and Pseudomonas aeruginosa and demonstrated that representative Gram-negative bacteria may develop tolerance to aBL. The observed adaption was a stable feature. Assays involving E. coli K-12 tolC-, tolA-, umuD-, and recA-deficient mutants revealed some possible mechanisms for aBL tolerance development.

Development and In Vitro Evaluation of Biocompatible PLA-Based Trilayer Nanofibrous Membranes for the Delivery of Nanoceria: A Novel Approach for Diabetic Wound Healing.

The attempts to explore and optimize the efficiency of diabetic wound healing's promotors are still in progress. Incorporation of cerium oxide nanoparticles (nCeO2) in appropriate nanofibers (NFs) can prolong and maximize their promoting effect for the healing of diabetic wounds, through their sustained releases, as well as the nanofibers role in mimicking of the extra cellular matrix (ECM). The as-prepared nCeO2 were analyzed by using UV-Vis spectroscopy, XRD, SEM-EDX, TEM and FTIR, where TEM and SEM images of both aqueous suspension and powder showed spherical/ovoid-shaped particles. Biodegradable trilayer NFs with cytobiocompatibility were developed to sandwich nCeO2 in PVA NFs as a middle layer where PLA NFs were electrospun as outer bilayer. The nCeO2-loaded trilayer NFs were characterized by SEM, XRD, FTIR and DSC. A two-stage release behavior was observed when the nanoceria was released from the trilayer-based nanofibers; an initial burst release took place, and then it was followed by a sustained release pattern. The mouse embryo fibroblasts, i.e., 3T3 cells, were seeded over the nCeO2-loaded NFs mats to investigate their cyto-biocompatibility. The presence and sustained release of nCeO2 efficiently enhance the adhesion, growth and proliferation of the fibroblasts' populations. Moreover, the incorporation of nCeO2 with a higher amount into the designed trilayer NFs demonstrated a significant improvement in morphological, mechanical, thermal and cyto-biocompatibility properties than lower doses. Overall, the obtained results suggest that designated trilayer nanofibrous membranes would offer a specific approach for the treatment of diabetic wounds through an effective controlled release of nCeO2.

Optimization of Streptococcus agalactiae Biofilm Culture in a Continuous Flow System for Photoinactivation Studies.

Streptococcus agalactiae is a relevant cause of neonatal mortality. It can be transferred to infants via the vaginal tract and cause meningitis, pneumonia, arthritis, or sepsis, among other diseases. The cause of therapy ineffectiveness and infection recurrence is the growth of bacteria as biofilms. To date, several research teams have attempted to find a suitable medium for the cultivation of S. agalactiae biofilms. Among others, simulated vaginal fluid has been used; however, biofilm production in this medium has been found to be lower than that in tryptic soy broth. We have previously shown that S. agalactiae can be successfully eradicated by photoinactivation in planktonic culture, but there have been no studies on biofilms. The aim of this study was to optimize S. agalactiae biofilm culture conditions to be used in photoinactivation studies. We compared biofilm production by four strains representing the most common serotypes in four different broth media with crystal violet staining. Then, we evaluated stationary biofilm culture in microtiter plates and biofilm growth in a CDC Biofilm Reactor® (BioSurface Technologies, Bozeman, MT, USA) under continuous flow conditions. Subsequently, we applied Rose Bengal-mediated photoinactivation to both biofilm models. We have shown that photoinactivation is efficient in biofilm eradication and is not cyto/phototoxic to human keratinocytes. We found conditions allowing for stable and repetitive S. agalactiae biofilm growth in continuous flow conditions, which can be successfully utilized in photoinactivation assays and potentially in all other antibacterial studies.

Dual-drug delivery of Ag-chitosan nanoparticles and phenytoin via core-shell PVA/PCL electrospun nanofibers.

Dual-drug delivery systems were constructed through coaxial techniques, which were convenient for the model drugs used the present work. This study aimed to fabricate core-shell electrospun nanofibrous membranes displaying simultaneous cell proliferation and antibacterial activity. For that purpose, phenytoin (Ph), a well-known proliferative agent, was loaded into a polycaprolactone (PCL) shell membrane, and as-prepared silver-chitosan nanoparticles (Ag-CS NPs), as biocidal agents, were embedded in a polyvinyl alcohol (PVA) core layer. The morphology, chemical composition, mechanical and thermal properties of the nanofibrous membranes were characterized by FESEM/STEM, FTIR and DSC. The coaxial PVA-Ag CS NPs/PCL-Ph nanofibers (NFs) showed more controlled Ph release than PVA/PCL-Ph NFs. There was notable improvement in the morphology, thermal, mechanical, antibacterial properties and cytobiocompatibility of the fibers upon incorporation of Ph and Ag-CS NPs. The proposed core-shell PVA/PCL NFs represent promising scaffolds for tissue regeneration and wound healing by the effective dual delivery of phenytoin and Ag-CS NPs.

Chitosan/Gold Hybrid Nanoparticles Enriched Electrospun PVA Nanofibrous Mats for the Topical Delivery of Punica granatum L. Extract: Synthesis, Characterization, Biocompatibility and Antibacterial Properties.

PURPOSE: Intending to obtain Punica granatum L. extract (PE)-loaded drug delivery system of better impact and biomedical applicability, the current study reports the use of crosslinked PVA nanofibers (NFs) as platforms incorporating different amounts of biosynthesized PE-CS-gold nanoparticles (PE-CS-Au NPs). METHODS: PE-conjugated CS-Au nanoparticles (PE-CS-Au NPs) were synthesized via green chemistry approach. The formation of PE-CS-Au NPs was confirmed by UV spectroscopy, DLS, SEM and STEM. PE-CS-Au NPs were then dispersed into polyvinyl alcohol (PVA) solution at different ratios, where the optimized ratios were selected for electrospinning and further studies. Crosslinking of PE-CS-Au NPs loaded PVA nanofibers (NFs) was performed via glutaraldehyde vapor. The morphology, chemical compositions, thermal stability and mechanical properties of PE-CS-Au NPs loaded NFs were evaluated by SEM, FTIR and DSC. Swelling capacity, biodegradability, PE release profiles, release kinetics, antibacterial and cell biocompatibility were also demonstrated. RESULTS: By incorporating PE-CS-Au NPs at 0.6% and 0.9%, the diameters of the nanofibers decreased from 295.7±83.1 nm in neat PVA to 165.6±43.4 and 147.8±42.7 nm, respectively. It is worth noting that crosslinking and incorporation of PE-CS-Au NPs improved thermal stability and mechanical properties of the obtained NFs. The release of PE from NFs was controlled by a Fickian diffusion mechanism (n value ˂0.5), whereas Higuchi was the mathematical model which could describe this release. The antibacterial activity was found to be directly proportional to the amount of the incorporated PE-CS-Au NPs. The human fibroblasts (HFF-1) showed the highest viability (123%) by seeding over the PVA NFs mats containing 0.9% PE-CS-Au NPs. CONCLUSION: The obtained results suggest that the electrospun PVA NFs composites containing 0.9% PE-CS-Au NPs can be used as antibacterial agents against antibiotic-resistant bacteria, and as suitable scaffolds for cell adhesion, growth and proliferation of fibroblast populations.

Antimicrobial Photodynamic Inactivation Affects the Antibiotic Susceptibility of Enterococcus spp. Clinical Isolates in Biofilm and Planktonic Cultures.

Enterococcus faecium and Enterococcus faecalis are opportunistic pathogens that can cause a vast variety of nosocomial infections. Moreover, E. faecium belongs to the group of ESKAPE microbes, which are the main cause of hospital-acquired infections and are especially difficult to treat because of their resistance to many antibiotics. Antimicrobial photodynamic inactivation (aPDI) represents an alternative to overcome multidrug resistance problems. This process requires the simultaneous presence of oxygen, visible light, and photosensitizing compounds. In this work, aPDI was used to resensitize Enterococcus spp. isolates to antibiotics. Antibiotic susceptibility testing according to European Committee on Antimicrobial Susceptibility Testing (EUCAST) recommendations was combined with synergy testing methods recommended by the American Society for Microbiology. Two clinical isolates, E. faecalis and E. faecium, were treated with a combination of aPDI utilizing rose bengal (RB) or fullerene (FL) derivative as photosensitizers, antimicrobial blue light (aBL), and 10 recommended antibiotics. aPDI appeared to significantly impact the survival rate of both isolates, while aBL had no significant effect. The synergy testing results differed between strains and utilized methods. Synergy was observed for RB aPDI in combination with gentamycin, ciprofloxacin and daptomycin against E. faecalis. For E. faecium, synergy was observed between RB aPDI and gentamycin or ciprofloxacin, while for RB aPDI with vancomycin or daptomycin, antagonism was observed. A combination of FL aPDI gives a synergistic effect against E. faecalis only with imipenem. Postantibiotic effect tests for E. faecium demonstrated that this isolate exposed to aPDI in combination with gentamycin, streptomycin, tigecycline, doxycycline, or daptomycin exhibits delayed growth in comparison to untreated bacteria. The results of synergy testing confirmed the effectiveness of aPDI in resensitization of the bacteria to antibiotics, which presents great potential in the treatment of infections caused by multidrug-resistant strains.

Factors Determining the Susceptibility of Bacteria to Antibacterial Photodynamic Inactivation.

Photodynamic inactivation of microorganisms (aPDI) is an excellent method to destroy antibiotic-resistant microbial isolates. The use of an exogenous photosensitizer or irradiation of microbial cells already equipped with endogenous photosensitizers makes aPDI a convenient tool for treating the infections whenever technical light delivery is possible. Currently, aPDI research carried out on a vast repertoire of depending on the photosensitizer used, the target microorganism, and the light delivery system shows efficacy mostly on in vitro models. The search for mechanisms underlying different responses to photodynamic inactivation of microorganisms is an essential issue in aPDI because one niche (e.g., infection site in a human body) may have bacterial subpopulations that will exhibit different susceptibility. Rapidly growing bacteria are probably more susceptible to aPDI than persister cells. Some subpopulations can produce more antioxidant enzymes or have better performance due to efficient efflux pumps. The ultimate goal was and still is to identify and characterize molecular features that drive the efficacy of antimicrobial photodynamic inactivation. To this end, we examined several genetic and biochemical characteristics, including the presence of individual genetic elements, protein activity, cell membrane content and its physical properties, the localization of the photosensitizer, with the result that some of them are important and others do not appear to play a crucial role in the process of aPDI. In the review, we would like to provide an overview of the factors studied so far in our group and others that contributed to the aPDI process at the cellular level. We want to challenge the question, is there a general pattern of molecular characterization of aPDI effectiveness? Or is it more likely that a photosensitizer-specific pattern of molecular characteristics of aPDI efficacy will occur?

Development of Antimicrobial Phototreatment Tolerance: Why the Methodology Matters.

Due to rapidly growing antimicrobial resistance, there is an urgent need to develop alternative, non-antibiotic strategies. Recently, numerous light-based approaches, demonstrating killing efficacy regardless of microbial drug resistance, have gained wide attention and are considered some of the most promising antimicrobial modalities. These light-based therapies include five treatments for which high bactericidal activity was demonstrated using numerous in vitro and in vivo studies: antimicrobial blue light (aBL), antimicrobial photodynamic inactivation (aPDI), pulsed light (PL), cold atmospheric plasma (CAP), and ultraviolet (UV) light. Based on their multitarget activity leading to deleterious effects to numerous cell structures-i.e., cell envelopes, proteins, lipids, and genetic material-light-based treatments are considered to have a low risk for the development of tolerance and/or resistance. Nevertheless, the most recent studies indicate that repetitive sublethal phototreatment may provoke tolerance development, but there is no standard methodology for the proper evaluation of this phenomenon. The statement concerning the lack of development of resistance to these modalities seem to be justified; however, the most significant motivation for this review paper was to critically discuss existing dogma concerning the lack of tolerance development, indicating that its assessment is more complex and requires better terminology and methodology.

Boosting the antibacterial activity of chitosan-gold nanoparticles against antibiotic-resistant bacteria by Punicagranatum L. extract.

The present work describes the synthesis of a new series of chitosan-gold hybrid nanoparticles (CS-AuNPs) for the delivery of Punicagranatum L. extract (PE). It proposes CS and PE as reducing agents for gold ions in aqueous solution. The effect of PE on the physicochemical properties of the CS-AuNPs was investigated with UV spectroscopy, DLS, DSC, XRD, FTIR, SEM/EDX and TEM. Interestingly, about 50 % reduction in size was observed with using PE alone for gold reduction. The ζ-potential of CS-AuNPs was shifted from +53.1 ± 6.7 mV to 31.0 ± 6.0 mV upon conjugation of the negatively-charged PE polyphenols. The developed PE-conjugated CS-AuNPs exhibited higher stability at different pH values. About 87 % of the loaded PE was released from the NPs over 24 h. The antibacterial activity of CS-PE-AuNPs displayed a synergetic affect against methicillin-resistant S. aureus with MIC and MBC values of 15.6 and 62.5 µg/mL, respectively.

Increased photoinactivation stress tolerance of Streptococcus agalactiae upon consecutive sublethal phototreatments.

Streptococcus agalactiae (Group B Streptococcus, GBS) is a common commensal bacterium in adults but remains a leading source of invasive infections in newborns, pregnant women, and the elderly, and more recently, causes an increased incidence of invasive disease in nonpregnant adults. Reduced penicillin susceptibility and emerging resistance to non-ß-lactams pose challenges for the development and implementation of novel, nonantimicrobial strategies to reduce the burden of GBS infections. Antimicrobial photodynamic inactivation (aPDI) via the production of singlet oxygen or other reactive oxygen species leads to the successful eradication of pathogenic bacteria, affecting numerous cellular targets of microbial pathogens and indicating a low risk of resistance development. Nevertheless, we have previously reported possible aPDI tolerance development upon repeated sublethal aPDI applications; thus, the current work was aimed at investigating whether aPDI tolerance could be observed for GBS and what mechanisms could cause it. To address this problem, 10 cycles of sublethal aPDI treatments employing rose bengal as a photosensitizer, were applied to the S. agalactiae ATCC 27956 reference strain and two clinical isolates (2306/02 and 2974/07, serotypes III and V, respectively). We demonstrated aPDI tolerance development and stability after 5 cycles of subculturing with no aPDI exposure. Though the treatment resulted in a stable phenotype, no increases in mutation rate or accumulated genetic alterations were observed (employing a RIF-, CIP-, STR-resistant mutant selection assay and cyl sequencing, respectively). qRT-PCR analysis demonstrated that 10 sublethal aPDI exposures led to increased expression of all tested major oxidative stress response elements; changes in sodA, ahpC, npx, cylE, tpx and recA expression indicate possible mechanisms of developed tolerance. Increased expression upon sublethal aPDI treatment was reported for all but two genes, namely, ahpC and cylE. aPDI targeting cylE was further supported by colony morphology changes induced with 10 cycles of aPDI (increased SCV population, increased hemolysis, increased numbers of dark- and unpigmented colonies). In oxidant killing assays, aPDI-tolerant strains demonstrated no increased tolerance to hypochlorite, superoxide (paraquat), singlet oxygen (new methylene blue) or oxidative stress induced by aPDI employing a structurally different photosensitizer, i.e., zinc phthalocyanine, indicating a lack of cross resistance. The results indicate that S. agalactiae may develop stable aPDI tolerance but not resistance when subjected to multiple sublethal phototreatments, and this risk should be considered significant when defining efficient anti-S. agalactiae aPDI protocols.

An extended logistic model of photodynamic inactivation for various levels of irradiance using the example of Streptococcus agalactiae.

Irradiance is an important factor influencing the acceleration of microorganism mortality in photodynamic inactivation (PDI) processes. Experimental observations of PDI processes indicate that the greater the irradiation power is, the faster the decrease in the population size of microorganisms. However, commonly used mathematical models of PDI processes usually refer only to specific values of irradiance without taking into account the influence of change in irradiance on the dynamic properties of inactivation. The main goal of this paper is to analyze the effect of irradiance on the PDI process and attempt to mathematically model the obtained dependencies. The analysis was carried out using the example of photodynamic inactivation of the bacterium Streptococcus agalactiae with the adopted Logistic PDI model optimized for several selected levels of irradiance. To take into account the impact of changes in irradiation power on the PDI model, the selected parameters were made appropriately dependent on this factor. The paper presents several variants of parameter modification with an evaluation of the model fitting quality criterion. The discussion on appropriate selection of parameters to be modified was carried out as a comparative analysis of several case studies. The extended logistic PDI model obtained in the conducted research effectively describes the dynamics of microorganism mortality in the whole tested irradiation power range.

Exploring the physicochemical and antimicrobial properties of gold-chitosan hybrid nanoparticles composed of varying chitosan amounts.

A green synthesis method for gold-chitosan hybrid nanoparticles (Au-CS hNPs) using different concentrations of CS as a capping/reducing agent is reported to investigate the effect of CS concentration on the physicochemical properties as well as the antimicrobial activity of the developed Au-CS hNPs. The as-synthesized Au-CS hNPs were characterized using visible spectrophotometry, FTIR, dynamic light scattering, DSC, XRD, SEM-EDX and TEM. The size of the formed hNPs ranges from 16.9 ± 3.9 nm (highest CS concentration) to 34.7 ± 7.6 nm (lowest CS concentration). It was noticed that increasing the amount of CS increases the ζ-potential from +25.1 to +53.1 mV and enhances the 6-months stability of the produced Au-CS hNPs. Furthermore, the obtained results indicated that the antimicrobial activity, in terms of MIC and CFU assays, is directly proportional to the amount of CS used in the preparation procedure. FTIR analysis revealed that the mechanism of formation of the Au-CS hNPs may involve complexation of CS with Au ions via its NH2 and OH groups followed by the chemical reduction of Au ions to metallic Au NPs. Eventually, higher amounts of CS are necessary for synthesizing highly stable Au-CS hNPs with small size, homogeneous shape and potent antibacterial/antifungal properties.