Recreational athletes during downhill-mountain biking (DMB) show high incidence of upper extremity fractures in combination with soft-tissue injuries.

Downhill-mountain biking (DMB) is a high-risk sport and often leads to several injuries, especially in non-professional athletes. We retrospectively analyzed the most common injuries and profiled the injury mechanism. Until now, there is no such analysis of injuries by non-professional mountain bike athletes. We collected patient data from patients who suffered from an injury during DMB. The inclusion criteria were (1) injury during the summer season of 2020 and 2021, (2) injury during off-road and downhill mountain bike sports activity, and (3) treatment at the Department of Traumatology of the Klinik Diakonissen Schladming. Patient data was analyzed regarding the type of injury, location of the injury, patient age and gender of the patients. Most patients with injury are at the age of 26-35. Second most are between 36 and 71 years old. The type of injury differs between age and gender. Mostly upper-extremity injuries occur with a high probability of shoulder injuries. In the elderly patients, we found additional injuries of the thorax and chest. To conclude, most common types of injuries are soft-tissue injuries, often in combination with fractures. The risk for injuries is higher for recreational athletes with different injury characteristics than professional athletes.

Stem Design in Total Hip Arthroplasty Influences Ipsilateral Knee Valgus: A Retrospective Comparative Analysis of 2953 Cases.

BACKGROUND: Total hip arthroplasty (THA) affects the biomechanics of the hip and the patient gait. The stem design influences femoral lever ratios and tissue trauma. Biomechanical changes such as these have the potential to induce knee arthritis. A varus or valgus configuration of knee arthritis is formed by asymmetric loadings. The aim of this study was to evaluate the impact of stem design in THA on knee valgus by comparing a standard implant with an implant with a short stem. METHODS: A total of 2953 patients who underwent primary total knee arthroplasty for end-stage osteoarthritis between 2015 and 2021 were included in this retrospective data analysis. Patients were divided into three groups, depending on hip status (straight stem, short stem, and native joint). Leg alignment was distinguished as varus or valgus, and the degree of axial deviation was measured. Descriptive and explorative statistical analyses were performed, with a p value < 0.05 set as significant. RESULTS: Ipsilateral knee valgus occurred significantly more often in patients with straight stems (57.2%) than in those with short stems (29%) and native joints (25.8%) (p < 0.001). Additionally, mean valgus deviation was significantly increased in patients with straight stems (8.9°) compared to those with short stems (6.4°) or native hip joints (6.7°). Both findings were accentuated in women. CONCLUSIONS: Previous ipsilateral straight-stem THA is associated with knee valgus deformity, especially in women. Short-stem THA seems to be better suited to restoring physiological biomechanics and preventing the development of valgus osteoarthritis of the ipsilateral knee.

Learning Curve for Short-Stem Total HIP Arthroplasty through an Anterolateral Approach.

Background and Objectives: Short-stem total hip arthroplasty has become increasingly popular in recent years. While many studies have shown excellent clinical and radiological results, very little is known about the learning curve for short-stem total hip arthroplasty through an anterolateral approach. Therefore, the aim of this study was to determine the learning curve for short-stem total hip arthroplasty among five residents in training. Materials and Methods: We performed retrospective data analysis of the first 30 cases of five randomly selected residents (n = 150 cases) with no experience before the index surgery. All patients were comparable, and several surgical parameters and radiological outcomes were analyzed. Results: The only surgical parameter with a significant improvement was the surgical time (p = 0.025). The changes in other surgical parameters and radiological outcomes showed no significant changes; only trends can be derived. As a result, the correlation between surgical time, blood loss, length of stay, and incision/suture time can also be seen. Only two of the five residents showed significant improvements in all examined surgical parameters. Conclusions: There are individual differences among the first 30 cases of the five residents. Some improved their surgical skills faster than others. It could be assumed that they assimilated their surgical skills after more surgeries. A further study with more than 30 cases of the five surgeons could provide more information on that assumption.

Age- and Gender-Related Differences in the Morphology of Cuff Tear Arthropathy: A Cross Sectional Analysis.

Rotator cuff tear arthropathy (CTA) is the most common reason for reverse total shoulder arthroplasty (RSA). There is minimal understanding of the natural progression of osteoarthritis of the shoulder and of the morphologic differences between men and women and between younger and older patients. This trial comprised 309 patients (342 shoulders) who underwent RSA due to CTA in the period between January 2009 and September 2019. The patients were divided into gender and age groups. Preoperative X-rays, computed tomography and magnetic resonance imaging were conducted using various classifications to describe the morphology of the CTA. Of all 342 analyzed shoulders, 209 were right and 133 were left shoulders. A total of 257 female shoulders and 85 male shoulders were assessed. Both mean age and age distribution were significantly different (74.37 years in female and 70.11 years in male patients, p = 0.001; 70.2% female patients in the age group <75.5 years and 80.1% in the age group >75.5 years, p = 0.045). A larger extent of progression of the fatty infiltration was detected both in the female cohort (p = 0.006) and in the older age group (p = 0.001). Additionally, older patients had significantly higher levels of muscle retraction (Patte; p = 0.003), a lower acromiohumeral distance (p = 0.042) and more advanced CTA (Seebauer; p = 0.006).

The Effect of Strength Training on Undetected Shoulder Pathology in Asymptomatic Athletes: An MRI Observational Study.

BACKGROUND: Data on the effects of weight training on joint morphology are mostly restricted to muscle gain. However, in many circumstances, it is not stated if there are negative consequences for the joints and their surrounding components. This study was conducted to explore whether long-term excessive resistance training (RT) causes hidden pathological alterations in the shoulder. METHODS: A total of eleven asymptomatic sportsmen (22 shoulders) underwent clinical and radiological examination of both shoulder joints. All participants had engaged in bodybuilding for at least four years, at least three times per week, and for at least four hours per week. All participants were examined clinically using the Constant Murley Score (CMS), Simple Shoulder Test (SST), UCLA Activity Test, and a specially designed questionnaire. All participants received a bilateral shoulder MRI. The MRI scans were checked for pathology using a checklist. RESULTS: Maximum scores were observed for the SST and UCLA Activity Test. The CMS was 97.7 points on average (range, 87-100). RT had been conducted for a mean of 10.7 years (range, 4-20), for an average of 8.8 h a week (range, 4-12). MRI examinations revealed two supraspinatus tendinopathies (9.1%), one labral change (4.5%), three humeral tuberosity cysts (13.6%), fourteen acromioclavicular (AC) joint hypertrophies (63.6%), five AC joint osteophytes (22.7%), and ten signs of AC joint inflammation (45.5%). CONCLUSIONS: The research results show that strength is associated with MRI-documented AC joint pathology. However, it appears that RT may not negatively affect other anatomical structures of the shoulder.

Clinical and Radiological Outcomes after Total Shoulder Arthroplasty Using Custom-Made Glenoid Components: A Systematic Review.

Reverse total shoulder arthroplasty presents itself sometimes as challenging when it comes to addressing massive bone loss, either in primary or revision settings. Custom components recently have made their way into shoulder prosthetics and are meant to help in the case of extensive glenoid bone destruction. Because of strict indication and the fairly recent introduction of these implants, the usage of custom-made glenoid implants is not very common yet. However, the early results are promising. The purpose of this review was to summarize and analyze the available literature. Therefore, a systematic review was performed according to PRISMA guidelines. A comprehensive search of the databases PubMed, Cochrane, and Livivo was performed to screen for studies reporting on clinical and radiological outcomes of custom glenoid implants. Four studies with a total of 46 shoulders were included in this review. The mean patient age was 68.8 years and the mean time of follow-up was 24.3 months. The weighted means showed an increase in CMS (32.7 points), in ASES (39.8 points), in anteversion (67.4 degrees), and in abduction (51.9 degrees) and a decrease in VAS (5.4 points). Custom-made glenoid implants are therefore a viable option in cases of large combined glenoid bone loss, both in primary and revision shoulder arthroplasty.

Functional and Radiological Outcomes after Treatment with Custom-Made Glenoid Components in Revision Reverse Shoulder Arthroplasty.

Glenoid implant position and fixation are challenging in severe glenoid defects in reverse total shoulder arthroplasty (rTSA). Custom-made glenoid implants are metal augmented implants that are specially produced for a certain defect. They provide the restoration of the joint line and proper fixation. This retrospective data analysis investigated the clinical and radiological outcomes after revision using custom-made glenoid implants. Between 2018 and 2020, nine patients (10 shoulders) with severe glenoid defects underwent revision rTSA using a custom-made glenoid implant (Materialise Glenius or Lima ProMade). The pre- and postoperative Constant Murley Score (CMS), UCLA Score and Subjective Shoulder Value (SSV) were assessed. Postoperative CT scans and X-rays in two planes were available. The minimum follow-up was 12 months, with a mean follow-up of 23.1 months. The mean preoperative CMS, UCLA Score and SSV were 10.9, 4.1 and 11.0, respectively. The mean postoperative CMS, UCLA Score and SSV showed significant increases of 51.7 (<0.001), 22.9 (<0.001) and 52.0 (<0.001), respectively. There were no signs of loosening implants or scapular notching, and no revision was necessary. This trial showed promising clinical and radiological short-term outcomes for custom-made glenoid components in revision rTSA.