Branching in poly(amine-co-ester) polyplexes impacts mRNA transfection.

Branching is a key structural parameter of polymers, which can have profound impacts on physicochemical properties. It has been demonstrated that branching is a modulating factor for mRNA delivery and transfection using delivery vehicles built from cationic polymers, but the influence of polymer branching on mRNA delivery remains relatively underexplored compared to other polymer features such as monomer composition, hydrophobicity, pKa, or the type of terminal group. In this study, we examined the impact of branching on the physicochemical properties of poly(amine-co-esters) (PACE) and their efficiency in mRNA transfection in vivo and in vitro under various conditions. PACE polymers were synthesized with various degrees of branching ranging from 0 to 0.66, and their transfection efficiency was systemically evaluated. We observed that branching improves the stability of polyplexes but reduces the pH buffering capacity. Therefore, the degree of branching (DB) must be optimized in a delivery route specific manner due to differences in challenges faced by polyplexes in different physiological compartments. Through a systematic analysis of physicochemical properties and mRNA transfection in vivo and in vitro, this study highlights the influence of polymer branching on nucleic acid delivery.

Modifying the Backbone Chemistry of PEG-Based Bottlebrush Block Copolymers for the Formation of Long-Circulating Nanoparticles.

Nanoparticle physicochemical properties have received great attention in optimizing the performance of nanoparticles for biomedical applications. For example, surface functionalization with small molecules or linear hydrophilic polymers is commonly used to tune the interaction of nanoparticles with proteins and cells. However, it is challenging to control the location of functional groups within the shell for conventional nanoparticles. Nanoparticle surfaces composed of shape-persistent bottlebrush polymers allow hierarchical control over the nanoparticle shell but the effect of the bottlebrush backbone on biological interactions is still unknown. The synthesis is reported of novel heterobifunctional poly(ethylene glycol) (PEG)-norbornene macromonomers modified with various small molecules to form bottlebrush polymers with different backbone chemistries. It is demonstrated that micellar nanoparticles composed of poly(lactic acid) (PLA)-PEG bottlebrush block copolymer (BBCP) with neutral and cationic backbone modifications exhibit significantly reduced cellular uptake compared to conventional unmodified BBCPs. Furthermore, the nanoparticles display long blood circulation half-lives of ≈22 hours and enhanced tumor accumulation in mice. Overall, this work sheds light on the importance of the bottlebrush polymer backbone and provides a strategy to improve the performance of nanoparticles in biomedical applications.

Nanoscale Surface Topography of Polyethylene Glycol-Coated Nanoparticles Composed of Bottlebrush Block Copolymers Prolongs Systemic Circulation and Enhances Tumor Uptake.

Improving the performance of nanocarriers remains a major challenge in the clinical translation of nanomedicine. Efforts to optimize nanoparticle formulations typically rely on tuning the surface density and thickness of stealthy polymer coatings, such as poly(ethylene glycol) (PEG). Here, we show that modulating the surface topography of PEGylated nanoparticles using bottlebrush block copolymers (BBCPs) significantly enhances circulation and tumor accumulation, providing an alternative strategy to improve nanoparticle coatings. Specifically, nanoparticles with rough surface topography achieve high tumor cell uptake in vivo due to superior tumor extravasation and distribution compared to conventional smooth-surfaced nanoparticles based on linear block copolymers. Furthermore, surface topography profoundly impacts the interaction with serum proteins, resulting in the adsorption of fundamentally different proteins onto the surface of rough-surfaced nanoparticles formed from BBCPs. We envision that controlling the nanoparticle surface topography of PEGylated nanoparticles will enable the design of improved nanocarriers in various biomedical applications.

Polymer nanoparticles deliver mRNA to the lung for mucosal vaccination.

An inhalable platform for messenger RNA (mRNA) therapeutics would enable minimally invasive and lung-targeted delivery for a host of pulmonary diseases. Development of lung-targeted mRNA therapeutics has been limited by poor transfection efficiency and risk of vehicle-induced pathology. Here, we report an inhalable polymer-based vehicle for delivery of therapeutic mRNAs to the lung. We optimized biodegradable poly(amine-co-ester) (PACE) polyplexes for mRNA delivery using end-group modifications and polyethylene glycol. These polyplexes achieved high transfection of mRNA throughout the lung, particularly in epithelial and antigen-presenting cells. We applied this technology to develop a mucosal vaccine for severe acute respiratory syndrome coronavirus 2 and found that intranasal vaccination with spike protein-encoding mRNA polyplexes induced potent cellular and humoral adaptive immunity and protected susceptible mice from lethal viral challenge. Together, these results demonstrate the translational potential of PACE polyplexes for therapeutic delivery of mRNA to the lungs.

Polyglycerol and Poly(ethylene glycol) exhibit different effects on pharmacokinetics and antibody generation when grafted to nanoparticle surfaces.

Poly(ethylene glycol) (PEG) is widely employed for passivating nanoparticle (NP) surfaces to prolong blood circulation and enhance localization of NPs to target tissue. However, the immune response of PEGylated NPs-including anti-PEG antibody generation, accelerated blood clearance (ABC), and loss of delivery efficacy-is of some concern, especially for treatments that require repeat administrations. Although polyglycerol (PG), which has the same ethylene oxide backbone as PEG, has received attention as an alternative to PEG for NP coatings, the pharmacokinetic and immunogenic impact of PG has not been studied systematically. Here, linear PG, hyperbranched PG (hPG), and PEG-coated polylactide (PLA) NPs with varying surface densities were studied in parallel to determine the pharmacokinetics and immunogenicity of PG and hPG grafting, in comparison with PEG. We found that linear PG imparted the NPs a stealth property comparable to PEG, while hPG-grafted NPs needed a higher surface density to achieve the same pharmacokinetic impact. While linear PG-grafted NPs induced anti-PEG antibody production in mice, they exhibited minimal accelerated blood clearance (ABC) effects due to the poor interaction with anti-PEG immunoglobulin M (IgM). Further, we observed no anti-polymer IgM responses or ABC effects for hPG-grafted NPs.

Inhalable polymer nanoparticles for versatile mRNA delivery and mucosal vaccination.

An inhalable platform for mRNA therapeutics would enable minimally invasive and lung targeted delivery for a host of pulmonary diseases. Development of lung targeted mRNA therapeutics has been limited by poor transfection efficiency and risk of vehicle-induced pathology. Here we report an inhalable polymer-based vehicle for delivery of therapeutic mRNAs to the lung. We optimized biodegradable poly(amine-co-ester) polyplexes for mRNA delivery using end group modifications and polyethylene glycol. Our polyplexes achieved high transfection of mRNA throughout the lung, particularly in epithelial and antigen-presenting cells. We applied this technology to develop a mucosal vaccine for SARS-CoV-2. Intranasal vaccination with spike protein mRNA polyplexes induced potent cellular and humoral adaptive immunity and protected K18-hACE2 mice from lethal viral challenge. One-sentence summary: Inhaled polymer nanoparticles (NPs) achieve high mRNA expression in the lung and induce protective immunity against SARS-CoV-2.

Surface Topography of Polyethylene Glycol Shell Nanoparticles Formed from Bottlebrush Block Copolymers Controls Interactions with Proteins and Cells.

Although poly(ethylene glycol) (PEG) is commonly used in nanoparticle design, the impact of surface topography on nanoparticle performance in biomedical applications has received little attention, despite showing significant promise in the study of inorganic nanoparticles. Control of the surface topography of polymeric nanoparticles is a formidable challenge due to the limited conformational control of linear polymers that form the nanoparticle surface. In this work, we establish a straightforward method to precisely tailor the surface topography of PEGylated polymeric nanoparticles based on tuning the architecture of shape-persistent amphiphilic bottlebrush block copolymer (BBCP) building blocks. We demonstrate that nanoparticle formation and surface topography can be controlled by systematically changing the structural parameters of BBCP architecture. Furthermore, we reveal that the surface topography of PEGylated nanoparticles significantly affects their performance. In particular, the adsorption of a model protein and the uptake into HeLa cells were closely correlated to surface roughness and BBCP terminal PEG block brush width. Overall, our work elucidates the importance of surface topography in nanoparticle research as well as provides an approach to improve the performance of PEGylated nanoparticles.

Brush-First and ROMP-Out with Functional (Macro)monomers: Method Development, Structural Investigations, and Applications of an Expanded Brush-Arm Star Polymer Platform.

The efficient synthesis of complex functional polymeric nanomaterials is often challenging. Ru-initiated ring-opening metathesis polymerization (ROMP) of multivalent macromonomers followed by cross-linking to form brush-arm star (BASP) polymers enables access to well-defined nano-structures with diverse functionality. This "brush-first" method leaves active Ru in the BASP microgel core, which could potentially be used in a subsequent "ROMP-out" (RO) step to introduce further modifications to the BASP structure via the addition of (macro)monomers. Here, we study this RO approach in depth. The efficiency of RO is assessed for a variety of BASP compositions using a combination of inductively coupled plasma mass spectrometry and gel permeation chromatography. To demonstrate the modularity of the RO process, arylboronic acid-functionalized BASPs were prepared; uptake of these RO-BASPs into hypersialylated cancer cells was enhanced relative to non-functionalized BASPs as determined by flow cytometry and fluorescence microscopy. In addition, the self-assembly of miktoarm BASPs prepared via brush-first and RO with different macromonomers is demonstrated. The combination of brush-first ROMP with RO provides a simple, modular strategy for access to a wide array of functional nanomaterials.