Bipolar Resistive Switching in 2D MoSe2 Grown by Atmospheric Pressure Chemical Vapor Deposition.

Two-dimensional (2D) transition metal dichalcogenides (TMDCs) are highly promising nanomaterials for various electronic devices such as field-effect transistors, junction diodes, tunneling devices, and, more recently, memristors. 2D MoSe2 stands out for having high electrical conductivity, charge carrier mobility, and melting point. While these features make it particularly appropriate as a switching layer in memristive devices, reliable and scalable production of large-area 2D MoSe2 still represents a challenge. In this study, we manufacture 2D MoSe2 films by atmospheric-pressure chemical vapor deposition and investigate them on the atomic scale. We selected and transferred MoSe2 bilayer to serve as a switching layer between asymmetric Au-Cu electrodes in miniaturized crossbar vertical memristors. The electrochemical metallization devices showed forming-free, bipolar resistive switching at low voltages, with clearly identifiable nonvolatile states. Other than low-power neuromorphic computing, low switching voltages approaching the range of biological action potentials could unlock hybrid biological interfaces.

Quantitative 3D Characterization of Functionally Relevant Parameters in Heavy-Oxide-Supported 4d Metal Nanocatalysts.

Accurate 3D nanometrology of catalysts with small nanometer-sized particles of light 3d or 4d metals supported on high-atomic-number oxides is crucial for understanding their functionality. However, performing quantitative 3D electron tomography analysis on systems involving metals like Pd, Ru, or Rh supported on heavy oxides (e.g., CeO2) poses significant challenges. The low atomic number (Z) of the metal complicates discrimination, especially for very small nanoparticles (1-3 nm). Conventional reconstruction methods successful for catalysts with 5d metals (e.g., Au, Pt, or Ir) fail to detect 4d metal particles in electron tomography reconstructions, as their contrasts cannot be effectively separated from those of the underlying support crystallites. To address this complex 3D characterization challenge, we have developed a full deep learning (DL) pipeline that combines multiple neural networks, each one optimized for a specific image-processing task. In particular, single-image super-resolution (SR) techniques are used to intelligently denoise and enhance the quality of the tomographic tilt series. U-net generative adversarial network algorithms are employed for image restoration and correcting alignment-related artifacts in the tilt series. Finally, semantic segmentation, utilizing a U-net-based convolutional neural network, splits the 3D volumes into their components (metal and support). This approach enables the visualization of subnanometer-sized 4d metal particles and allows for the quantitative extraction of catalytically relevant structural information, such as particle size, sphericity, and truncation, from compressed sensing electron tomography volume reconstructions. We demonstrate the potential of this approach by characterizing nanoparticles of a metal widely used in catalysis, Pd (Z = 46), supported on CeO2, a very high density (7.22 g/cm3) oxide involving a quite high-atomic-number element, Ce (Z = 58).

A modular design approach to polymer-coated ZnO nanocrystals.

Hybrid materials based on inorganic nanocrystals with organic polymers feature peculiar and fascinating properties and various applications. However, there is still a need for simple synthesis procedures that provide precise control over the polymer/nanocrystal microstructure of these materials. Herein, a novel organometallic approach to polymer-coated ZnO nanocrystals was developed. The presented method merges the initial ring-opening polymerization of ϵ-caprolactone mediated by an organozinc alkoxide initiator and an air-promoted transformation of the resulting macromolecular organozinc species. This one-pot procedure results in quantum-sized ZnO crystals with a core diameter of ca 3 nm coated by poly(ϵ-caprolactone) covalently bonded to the surface. Overall, the ability to create well-defined hybrid composites should provide a unique ability to access various nanosystems.

Dust Monitors in JET with ITER-like Wall for Diagnosis of Mobilized Particles and Co-Deposited Layers.

Silicon plates were installed above the inner and outer divertor of the JET with the ITER-like wall (ILW) after the second and third ILW campaigns to monitor dust generation and deposition with the aim to determine the morphology and content of individual particles and co-deposits, including deuterium content. Particular interest was in metal-based particles: Be, W, steel, Cu. Ex-situ examination after two ILW campaigns was performed by a set of microscopy and ion beam methods including micro-beam nuclear reaction analysis and particle-induced X-ray emission. Different categories of Be-rich particles were found: co-deposits peeled-off from plasma-facing components (PFC), complex multi-element spherical objects, and solid metal splashes and regular spherical droplets. The fuel content on the two latter categories was at the level of 1 × 1016 at/cm-2 indicating that Be melting and splashing occurred in the very last phase of the second experimental campaign. The splashes adhere firmly to the substrate thus not posing risk of Be dust mobilisation. No tungsten droplets were detected. The only W-containing particles were fragments of tungsten coatings from the divertor tiles.

Properties of graphene deposited on GaN nanowires: influence of nanowire roughness, self-induced nanogating and defects.

We present detailed Raman studies of graphene deposited on gallium nitride nanowires with different variations in height. Our results indicate that different density and height of nanowires impact graphene properties such as roughness, strain, and carrier concentration as well as density and type of induced defects. Tracing the manifestation of those interactions is important for the application of novel heterostructures. A detailed analysis of Raman spectra of graphene deposited on different nanowire substrates shows that bigger differences in nanowires height increase graphene strain, while a higher number of nanowires in contact with graphene locally reduces the strain. Moreover, the value of graphene carrier concentration is found to be correlated with the density of nanowires in contact with graphene. The lowest concentration of defects is observed for graphene deposited on nanowires with the lowest density. The contact between graphene and densely arranged nanowires leads to a large density of vacancies. On the other hand, grain boundaries are the main type of defects in graphene on rarely distributed nanowires. Our results also show modification of graphene carrier concentration and strain by different types of defects present in graphene. Therefore, the nanowire substrate is promising not only for strain and carrier concentration engineering but also for defect engineering.

ZnO nanocrystals derived from organometallic approach: Delineating the role of organic ligand shell on physicochemical properties and nano-specific toxicity.

The surface organic ligands have profound effect on modulation of different physicochemical parameters as well as toxicological profile of semiconductor nanocrystals (NCs). Zinc oxide (ZnO) is one of the most versatile semiconductor material with multifarious potential applications and systematic approach to in-depth understand the interplay between ZnO NCs surface chemistry along with physicochemical properties and their nano-specific toxicity is indispensable for development of ZnO NCs-based devices and biomedical applications. To this end, we have used recently developed the one-pot self-supporting organometallic (OSSOM) approach as a model platform to synthesize a series of ZnO NCs coated with three different alkoxyacetate ligands with varying the ether tail length which simultaneously act as miniPEG prototypes. The ligand coating influence on ZnO NCs physicochemical properties including the inorganic core size, the hydrodynamic diameter, surface charge, photoluminescence (quantum yield and decay time) and ZnO NCs biological activity toward lung cells was thoroughly investigated. The resulting ZnO NCs with average core diameter of 4-5 nm and the hydrodynamic diameter of 8-13 nm exhibit high photoluminescence quantum yield reaching 33% and a dramatic slowing down of charge recombination up to 2.4 µs, which is virtually unaffected by the ligand's character. Nano-specific ZnO NCs-induced cytotoxicity was tested using MTT assay with normal (MRC-5) and cancer (A549) human lung cell lines. Noticeably, no negative effect has been observed up to the NCs concentration of 10 µg/mL and essentially very low negative toxicological impact could be noticed at higher concentrations. In the latter case, the MTT data analysis indicate that there is a subtle interconnection between inorganic core-organic shell dimensions and toxicological profile of ZnO NCs (strikingly, the NCs coated by the carboxylate bearing a medium ether chain length exhibit the lowest toxicity level). The results demonstrate that, when fully optimized, our organometallic self-supporting approach can be a highly promising method to obtain high-quality and bio-stable ligand-coated ZnO NCs.

Safe-by-Design Ligand-Coated ZnO Nanocrystals Engineered by an Organometallic Approach: Unique Physicochemical Properties and Low Toxicity toward Lung Cells.

The unique physicochemical properties and biocompatibility of zinc oxide nanocrystals (ZnO NCs) are strongly dependent on the nanocrystal/ligand interface, which is largely determined by synthetic procedures. Stable ZnO NCs coated with a densely packed shell of 2-(2-methoxyethoxy)acetate ligands, which act as miniPEG prototypes, with average core size and hydrodynamic diameter of 4-5 and about 12 nm, respectively, were prepared by an organometallic self-supporting approach, fully characterized, and used as a model system for biological studies. The ZnO NCs from the one-pot, self-supporting organometallic procedure exhibit unique physicochemical properties such as relatively high quantum yield (up to 28 %), ultralong photoluminescence decay (up to 2.1 µs), and EPR silence under standard conditions. The cytotoxicity of the resulting ZnO NCs toward normal (MRC-5) and cancer (A549) human lung cell lines was tested by MTT assay, which demonstrated that these brightly luminescent, quantum-sized ZnO NCs have a low negative impact on mammalian cell lines. These results substantiate that the self-supporting organometallic approach is a highly promising method to obtain high-quality, nontoxic, ligand-coated ZnO NCs with prospective biomedical applications.

An organometallic route to chiroptically active ZnO nanocrystals.

The unique optical properties of zinc oxide nanocrystals (ZnO NCs) are strongly dependent on both the properties and the composition of the inorganic core-organic ligand interface. Developing a novel organometallic self-supporting approach, we report on the synthesis and characterization of ZnO nanocrystals coated by chiral monoanionic aminoalcoholate ligands. The resulting ZnO NCs are both chiroptically active and possess size dependent optical properties. The size and in consequence the emission color of the ZnO NCs could be simply adjusted by the characteristic of the aminoalcohol used.

Insight into the synthesis procedure of Fe3+/TiO2-based photocatalyst applied in the selective photo-oxidation of benzyl alcohol under sun-imitating lamp.

Fe3+/TiO2/zeolite Y photocatalyst synthesized by using sonophotodeposition method was compared with photocatalysts prepared by simple photodeposition and sonodeposition methods in order to clarify the role of light irradiation and ultrasounds while they are used simultaneously. To gain an insight into the mechanism of this method a detailed characterization of the photocatalysts was carried out by means of the following techniques: UV-vis diffuse reflectance spectroscopy, X-ray photoelectron spectroscopy, transmission electron microscopy, Mössbauer measurements and photocatalytic test reaction. Basing on the results from these techniques the chemical role of light and mainly mechanical role of ultrasound were observed. The selective photocatalytic oxidation of benzyl alcohol into benzaldehyde in liquid phase was a test reaction verifying the utility of the prepared materials. The best photocatalytic efficiency in this reaction was performed by photocatalyst synthesized using compilation of ultrasound energy with photoexcitation.

From Well-Defined Alkylzinc Phosphinates to Quantum-Sized ZnO Nanocrystals.

Despite various applications of alkylzinc carboxylates in chemistry and materials science, the corresponding organozinc derivatives of organophosphorus compounds still represent an insufficiently explored area. To fill this gap, we report on the synthesis of alkylzinc phosphinates and their use as efficient precursors of phosphinate-coated ZnO nanocrystals in the quantum size regime. Examples of a series of alkylzinc phosphinates with the general formula [RZn(O2 PR'2 )] (R=tBu or Et) have been prepared through equimolar reactions between ZnR2 and a selected phosphinic acid, namely dimethylphosphinic acid (dmpha-H), methylphenylphosphinic acid (mppha-H), diphenylphosphinic acid (dppha-H), or bis(4-methoxyphenyl)phosphinic acid (dmppha-H). The reactivities of alkylzinc phosphinate complexes toward H2 O and O2 have also been investigated, which resulted in the isolation of two oxo-zinc phosphinate clusters, that is, [Zn4 (µ4 -O)(dppha)6 ] and [Zn4 (µ4 -O)(dmppha)6 ], as well as the unique alkoxy(oxo)zinc cluster [Zn4 (µ4 -O)(µ2 -OtBu)(dppha)5 ]. Analysis of the crystal structures has revealed that organozinc complexes incorporating phosphinate ligands exhibit a unique capacity for shape-driven self-assembly to produce extended networks, including noncovalent quasi-porous materials. Finally, monodispersed and quantum-sized ZnO NCs coated with phosphinate ligands have been prepared using a non-external-surfactant-assisted wet-chemical organometallic approach based on well-defined [RZn(O2 PR'2 )]-type compounds. The resulting brightly luminescent ZnO NCs exhibit average core sizes and hydrodynamic diameters in the ranges 2-4.5 nm and 5-8 nm, respectively. The size of the inorganic core is slightly affected by the character of the incorporated phosphinate ligand, being smallest for ZnO NCs coated by asymmetrically substituted mppha ligands. Regardless of whether or not various phosphinate coating ligands could be controllably applied on the ZnO NC surface, no significant differences were found in the luminescence profiles of the analyzed nanosystems.

'Clickable' ZnO nanocrystals: the superiority of a novel organometallic approach over the inorganic sol-gel procedure.

We demonstrate for the first time a highly efficient Cu(i)-catalyzed alkyne-azide cycloaddition reaction on the surface of ZnO nanocrystals with retention of their photoluminescence properties. Our comparative studies highlight the superiority of a novel self-supporting organometallic method for the preparation of brightly luminescent and well-passivated ZnO nanocrystals over the traditional sol-gel procedure.

Simonsenia aveniformis sp. nov. (Bacillariophyceae), molecular phylogeny and systematics of the genus, and a new type of canal raphe system.

The genus Simonsenia is reviewed and S. aveniformis described as new for science by light and electron microscopy. The new species originated from estuarine environments in southern Iberia (Atlantic coast) and was isolated into culture. In LM, Simonsenia resembles Nitzschia, with bridges (fibulae) beneath the raphe, which is marginal. It is only electron microscope (EM) examination that reveals the true structure of the raphe system, which consists of a raphe canal raised on a keel (wing), supported by rib like braces (fenestral bars) and tube-like portulae; between the portulae the keel is perforated by open windows (fenestrae). Based on the presence of portulae and a fenestrated keel, Simonsenia has been proposed to be intermediate between Bacillariaceae and Surirellaceae. However, an rbcL phylogeny revealed that Simonsenia belongs firmly in the Bacillariaceae, with which it shares a similar chloroplast arrangement, rather than in the Surirellaceae. Lack of homology between the surirelloid and simonsenioid keels is reflected in subtle differences in the morphology and ontogeny of the portulae and fenestrae. The diversity of Simonsenia has probably been underestimated, particularly in the marine environment.

[Dental plaque as a biofilm - a risk in oral cavity and methods to prevent]. / Plytka bakteryjna jako biofilm ­ zagrozenia w jamie ustnej oraz sposoby zapobiegania.

Bacteria living constantly in the oral cavity are in the form of a biofilm. The biofilm formed on a solid base such as the enamel of the teeth, fillings, restorations, orthodontic appliances or obturators is dental plaque. Disturbance of homeostasis of biofilm, excessive growth or increase in the number of acid-forming bacteria leads to the development of the most common diseases of the oral cavity, i.e. dental caries and periodontal disease. The presence of bacterial biofilm on the walls of the root canal or at the top of the root on an outer wall leads to complications and failure in endodontic treatment. The aim of the study was to present the latest information on the occurrence, development and the role of biofilm in the etiopathogenesis of oral diseases and its control. Based on the literature analyzed, it can be concluded that the biofilm, due to its complex structure and numerous mechanisms of bacteria adaptation, is an effective barrier against the traditional agents with antibacterial properties. There are now great hopes for nanotechnology as an innovative method for obtaining new structures of nanometric size and different properties than source materials. The use of antibacterial properties of nano-silver used in dentistry significantly reduces the metabolic activity and the number of colony forming bacteria and lactic acid production in the biofilm.

tert-Butyl(tert-butoxy)zinc hydroxides: hybrid models for single-source precursors of ZnO nanocrystals.

Alkylzinc alkoxides, [RZnOR']4, have received much attention as efficient precursors of ZnO nanocrystals (NCs), and their "Zn4O4 " heterocubane core has been regarded as a "preorganized ZnO". A comprehensive investigation of the synthesis and characterization of a new family of tert-butyl(tert-butoxy)zinc hydroxides, [(tBu)4 Zn4 (µ3-OtBu)x (µ3-OH)4-x], as model single-source precursors of ZnO NCs is reported. The direct reaction between well-defined [tBuZnOH]6 (16) and [tBuZnOtBu]4 (24) in various molar ratios allows the isolation of new mixed cubane aggregates as crystalline solids in a high yield: [(tBu)4 Zn4 (µ3-OtBu)3 (µ3-OH)] (3), [(tBu)4Zn4 (µ3-OtBu)2 (µ3-OH)2] (4), [(tBu)4 Zn4 (µ3-OtBu)(µ3-OH)3] (5). The resulting products were characterized in solution by (1) H NMR and IR spectroscopy, and in the solid state by single-crystal X-ray diffraction. The thermal transformations of 2-5 were monitored by in situ variable-temperature powder X-ray diffraction and thermogravimetric measurements. The investigation showed that the Zn-OH groups appeared to be a desirable feature for the solid-state synthesis of ZnO NCs that significantly decreased the decomposition temperature of crystalline precursors 3-5.

Characterization of Sc2O3&CeO2-stabilized ZrO2 powders via co-precipitation or hydrothermal synthesis.

As the presence of Sc2O3 and CeO2 is known to largely enhance the ionic conductivity in the temperature range of 600-800°C, compared with the conventional yttria-stabilized ZrO2, Sc2O3&CeO2-stabilized ZrO2 provide its applicability as electrolytes in solid oxide fuel cells. The current study introduces the methodology to synthesize Sc2O3&CeO2-stabilized ZrO2 powders by using co-precipitation technique or high-temperature hydrothermal reaction, and further describes the structural characterization of the zirconia powders synthesized by the above-mentioned two methods. The co-precipitation technique was found to allow obtaining powders of cubic phase, whereas high-temperature hydrothermal synthesis results in the presence of a monoclinic phase as well. The scanning transmission electron microscope observations also confirm that the size of the synthesized ZrO2 powders in this study is found to be much smaller than that of commercially available powders.