Study on Linewidth and Phase Noise Characteristics of a Narrow Linewidth External Cavity Diode Laser.

In the field of inter-satellite laser communication, achieving high-quality communication and compensating for the Doppler frequency shift caused by relative motion necessitate lasers with narrow linewidths, low phase noise, and the ability to achieve mode-hop-free tuning within a specific range. To this end, this paper investigates a novel external cavity diode laser (ECDL) with a frequency-selective F-P etalon structure, leveraging the external cavity F-P etalon structure in conjunction with an auxiliary filter to achieve single longitudinal mode selection. The laser undergoes linewidth testing using a delayed self-heterodyne beating method, followed by the testing of its phase noise and frequency noise characteristics using a noise analyzer, yielding beat spectra and noise power spectral density profiles. Furthermore, the paper introduces an innovative bidirectional temperature-scanning laser method to achieve optimal laser-operating point selection and mode-hop-free tuning. The experimental results showcase that the single longitudinal mode spectral side-mode suppression ratio (SMSR) is around 70 dB, and the output power exceeds 10 mW. Enhancing the precision of the F-P etalon leads to a more pronounced suppression of low-frequency phase noise, reducing the Lorentzian linewidth from the initial 10 kHz level to a remarkable 5 kHz level. The bidirectional temperature-scanning laser method not only allows for the selection of the optimal operating point but also enables mode-hop-free tuning within 160 pm.

The Performance Characterization and Optimization of Fiber-Optic Acoustic Pressure Sensors Based on the MOEMS Sensitized Structure.

In order to investigate the factors affecting the acoustic performance of the extrinsic Fabry-Perot interferometer (EFPI) fiber-optic acoustic pressure sensor and to effectively improve its detection capability, this paper enhances the sensor's detection sensitivity by adding more sensitized rings to its acoustic pressure-sensitive film. Furthermore, a novel real-time coupled acoustic test method is proposed to simultaneously monitor the changes in the spectral and acoustic metrics of the sensor to characterize its overall performance. Finally, an EFPI-type fiber-optic acoustic pressure sensor was developed based on the Micro-Optical Electro-Mechanical System (MOEMS). The acoustic tests indicate that the optimized fiber-optic acoustic pressure sensor has a sensitivity as high as 2253.2 mV/Pa, and the acoustic overload point (AOP) and signal-to-noise ratios (SNRs) can reach 108.85 dB SPL and 79.22 dB, respectively. These results show that the sensor produced through performance characterization experiments and subsequent optimization has a very high acoustic performance index, which provides a scientific theoretical basis for improving the overall performance of the sensor and will have broad application prospects in the field of acoustic detection.

Improved Optical Path Structure for Symmetric Demodulation Method in EFPI Fiber Optic Acoustic Sensors Using Wavelength Division Multiplexing.

This paper presents a novel improvement in the optical path structure of a three-wavelength symmetric demodulation method applied to extrinsic Fabry-Perot interferometer (EFPI) fiber optic acoustic sensors. The traditional approach of using couplers to construct the phase difference in the symmetric demodulation method is replaced with a new approach that combines the symmetric demodulation algorithm with wavelength division multiplexing (WDM) technology. This improvement addresses the issue of a suboptimal coupler split ratio and phase difference, which can affect the accuracy and performance of the symmetric demodulation method. In an anechoic chamber test environment, the symmetric demodulation algorithm implemented with the WDM optical path structure achieved a signal-to-noise ratio (SNR) of 75.5 dB (1 kHz), a sensitivity of 1104.9 mV/Pa (1 kHz), and a linear fitting coefficient of 0.9946. In contrast, the symmetric demodulation algorithm implemented with the traditional coupler-based optical path structure achieved an SNR of 65.1 dB (1 kHz), a sensitivity of 891.75 mV/Pa (1 kHz), and a linear fitting coefficient of 0.9905. The test results clearly indicate that the improved optical path structure based on WDM technology outperforms the traditional coupler-based optical path structure in terms of sensitivity, SNR, and linearity.

Deep Learning-Based Speech Enhancement of an Extrinsic Fabry-Perot Interferometric Fiber Acoustic Sensor System.

To achieve high-quality voice communication technology without noise interference in flammable, explosive and strong electromagnetic environments, the speech enhancement technology of a fiber-optic external Fabry-Perot interferometric (EFPI) acoustic sensor based on deep learning is studied in this paper. The combination of a complex-valued convolutional neural network and a long short-term memory (CV-CNN-LSTM) model is proposed for speech enhancement in the EFPI acoustic sensing system. Moreover, the 3 × 3 coupler algorithm is used to demodulate voice signals. Then, the short-time Fourier transform (STFT) spectrogram features of voice signals are divided into a training set and a test set. The training set is input into the established CV-CNN-LSTM model for model training, and the test set is input into the trained model for testing. The experimental findings reveal that the proposed CV-CNN-LSTM model demonstrates exceptional speech enhancement performance, boasting an average Perceptual Evaluation of Speech Quality (PESQ) score of 3.148. In comparison to the CV-CNN and CV-LSTM models, this innovative model achieves a remarkable PESQ score improvement of 9.7% and 11.4%, respectively. Furthermore, the average Short-Time Objective Intelligibility (STOI) score witnesses significant enhancements of 4.04 and 2.83 when contrasted with the CV-CNN and CV-LSTM models, respectively.

Integrated athermal arrayed-waveguide grating multiplexer and demultiplexer with all-metal compensating rod for broadband temperature application.

In this paper, a unique device that can act as both multiplexer and demultiplexer is proposed with two all-metal compensating rods that makes the compensated chip almost the same spectrum profile as the original one. In this way a flat-top athermal arrayed-waveguide grating module of 100-GHz×40-ch is successfully fabricated. A small center wavelength shift of ±25 pm is achieved for the ultra-wide temperature range from -40°C to 85°C with the low insertion loss change of less than ±0.14 dB.