Nutritional supplementation, tooth crown size, and trait expression in individuals from Tezonteopan, Mexico.

Understanding how epigenetic factors impact dental phenotypes can help refine the use of teeth for elucidating biological relationships among human populations. We explored relationships among crown size, principal cusp spacing, and accessory cusp expression in maxillary dental casts of nutritionally supplemented (n = 34) and non-supplemented (n = 39) individuals from Tezonteopan, Mexico. We hypothesized that the non-supplemented group would exhibit smaller molar crowns and reduced intercusp spacing. Since intercusp spacing is thought to be more sensitive to epigenetic influences than crown size, we predicted that the supplemented and non-supplemented groups would differ more in the former than the latter. Previous work suggests that molar accessory cusp expression may be elevated under conditions of stress. We therefore expected evidence of greater Carabelli and Cusp 5 trait expression in the non-supplemented group. We further hypothesized that anterior teeth would be affected by nutritional stress during development, with the non-supplemented group having smaller anterior tooth crowns and therefore limited space to form the tuberculum dentale. Finally, we tested whether the presence of molar accessory traits followed predictions of the Patterning Cascade Model of tooth morphogenesis in the entire sample. Our results supported the expectation that cusp spacing would differ more than molar crown size between the two groups. Carabelli trait showed little evidence of frequency differences between groups, but some evidence of greater trait scores in the non-supplemented group. The non-supplemented group also showed evidence of greater Cusp 5 frequency and expression. In the central incisors and canines, there was strong evidence for smaller crown sizes and reduced tuberculum dentale frequency in the non-supplemented group. With both groups pooled together, there was strong evidence of closer mesiodistal distances among principal cusps in molars with accessory cusps, a finding that is consistent with the PCM. Overall, our findings suggest that nutritional stress may affect accessory cusp expression.

Talon cusp expression in Cayo Santiago rhesus macaques (Macaca mulatta).

OBJECTIVES: This brief communication documents the prevalence of maxillary central incisor talon cusps in Cayo Santiago rhesus monkeys (Macaca mulatta) and assesses whether talon cusp presence occurs at equivalent frequencies across matrilines. MATERIALS AND METHODS: The data on cusp presence vs. absence were analyzed by logistic regression in 170 monkeys (82 females, 78 males) from seven different matrilines. Sample sizes per matriline ranged from 10 to 42. Observations of talon cusps were blind with respect to matriline and sex. RESULTS: Talon cusps were present in 9.4% of the sample. By matriline, cusp frequencies ranged from 0%-Matrilines 073 and 106%-to 19.1% in Matriline 076. The frequency of the talon cusp in Matriline 076 was significantly greater than the frequency of the cusp in the remainder of the sample. There was no statistically significant difference in the frequency of the talon cusp by sex. CONCLUSIONS: This study suggests that the talon cusp in rhesus monkeys, as in humans and baboons, is a rare trait. Elevated prevalence of the talon cusp in Matriline 076 suggests the possibility of a genetic influence on talon cusp expression.

How mangabey molar form differs under routine vs. fallback hard-object feeding regimes.

Background: Components of diet known as fallback foods are argued to be critical in shaping primate dental anatomy. Such foods of low(er) nutritional quality are often non-preferred, mechanically challenging resources that species resort to during ecological crunch periods. An oft-cited example of the importance of dietary fallbacks in shaping primate anatomy is the grey-cheeked mangabey Lophocebus albigena. This species relies upon hard seeds only when softer, preferred resources are not available, a fact which has been linked to its thick dental enamel. Another mangabey species with thick enamel, the sooty mangabey Cercocebus atys, processes a mechanically challenging food year-round. That the two mangabey species are both thickly-enameled suggests that both fallback and routine consumption of hard foods are associated with the same anatomical feature, complicating interpretations of thick enamel in the fossil record. We anticipated that aspects of enamel other than its thickness might differ between Cercocebus atys and Lophocebus albigena. We hypothesized that to function adequately under a dietary regime of routine hard-object feeding, the molars of Cercocebus atys would be more fracture and wear resistant than those of Lophocebus albigena. Methods: Here we investigated critical fracture loads, nanomechanical properties of enamel, and enamel decussation in Cercocebus atys and Lophocebus albigena. Molars of Cercopithecus, a genus not associated with hard-object feeding, were included for comparison. Critical loads were estimated using measurements from 2D µCT slices of upper and lower molars. Nanomechanical properties (by nanoindentation) and decussation of enamel prisms (by SEM-imaging) in trigon basins of one upper second molar per taxon were compared. Results: Protocone and protoconid critical fracture loads were significantly greater in Cercocebus atys than Lophocebus albigena and greater in both than in Cercopithecus. Elastic modulus, hardness, and elasticity index in most regions of the crown were greater in Cercocebus atys than in the other two taxa, with the greatest difference in the outer enamel. All taxa had decussated enamel, but that of Cercocebus atys uniquely exhibited a bundle of transversely oriented prisms cervical to the radial enamel. Quantitative comparison of in-plane and out-of-plane prism angles suggests that decussation in trigon basin enamel is more complex in Cercocebus atys than it is in either Lophocebus albigena or Cercopithecus cephus. These findings suggest that Cercocebus atys molars are more fracture and wear resistant than those of Lophocebus albigena and Cercopithecus. Recognition of these differences between Cercocebus atys and Lophocebus albigena molars sharpens our understanding of associations between hard-object feeding and dental anatomy under conditions of routine vs. fallback hard-object feeding and provides a basis for dietary inference in fossil primates, including hominins.

Aspects of molar form and dietary proclivities of African colobines.

This study investigates aspects of molar form in three African colobine species: Colobus polykomos, Colobus angolensis, and Piliocolobus badius. Our samples of C. polykomos and P. badius are from the Taï Forest, Ivory Coast; our sample of C. angolensis is from Diani, Kenya. To the extent that protective layers surrounding seeds are hard, we predicted that molar features related to hard-object feeding would be more pronounced in Colobus than they are Piliocolobus, as seed-eating generally occurs at higher frequencies in species of the former. We further predicted that among the colobines we studied, these features would be most pronounced in Taï Forest C. polykomos, which feeds on Pentaclethra macrophylla seeds encased within hard and tough seed pods. We compared overall enamel thickness, enamel thickness distribution, absolute crown strength, cusp tip geometry, and flare among molar samples. Sample sizes per species and molar type varied per comparison. We predicted differences in all variables except overall enamel thickness, which we expected would be invariant among colobines as a result of selection for thin enamel in these folivorous species. Of the variables we examined, only molar flare differed significantly between Colobus and Piliocolobus. Our findings suggest that molar flare, an ancient feature of cercopithecoid molars, was retained in Colobus but not in Piliocolobus, perhaps as a result of differences in the seed-eating proclivities of the two genera. Contrary to predictions, none of the aspects of molar form we investigated tracked current dietary differences in seed-eating between the two Colobus species. Finally, we explored the possibility that molar flare and absolute crown strength, when analyzed together, might afford greater differentiation among these colobine species. A multivariate t test of molar flare and absolute crown strength differentiated C. polykomos and P. badius, possibly reflecting known niche divergence between these two sympatric Taï Forest species.

Longitudinal changes in juvenile and adolescent body mass indices before, during, and after the COVID-19 lockdown in New Zealand.

OBJECTIVE: This study uses longitudinal data from school children in Dunedin, New Zealand, to evaluate impacts of COVID-19 lockdown measures on changes in body mass (BMI, kg/m2 ). Impacts are assessed using two non-mutually exclusive hypotheses. The "structured days" hypothesis holds that children tend to alter sleep patterns, reduce activity and increase snacking when not in structured environments. The bidirectional hypothesis proposes that over-weight or obese children are predisposed to further gains in unstructured settings. METHODS: Juveniles and adolescents (n = 95, 60% female) were recruited from Dunedin schools. Repeated measures analyses assessed variation in intra-individual change in BMI during four periods: P1 (before summer break), P2 (during summer break), P3 (during the COVID-19 lockdown), and P4 (after the lockdown ended). The model also examined if these changes were influenced by participants' sex or body size early in the first period assessed using log-transformed BMI, log-transformed weight, height, or lower leg length. RESULTS: Repeated measures analyses of per month gains in BMI (kg/m2 ) during the four periods revealed consistent period (p ≤ .001), period by sex (p ≤ .010), and period by body size (p ≤ .001) interactions across all four body size proxies. Both sexes experienced the greatest gains during the lockdown (P3), but differed in response to their summer break (P2). CONCLUSION: Results are mostly consistent with the "structured days" hypothesis, but challenge the bidirectional hypothesis as defined. Further research better characterizing risks of gains in adiposity are needed.

Male Cayo Santiago rhesus macaques (Macaca mulatta) tend to have greater molar wear than females at comparable ages: exploring two possible reasons why.

Objectives: (1) To investigate sex differences in molar wear in known-age Cayo Santiago rhesus macaques (Macaca mulatta) and, (2) To explore sex differences in body weight and molar eruption timing as factors influencing sex differences in molar wear. Materials and Methods: Data set I comprises wear scores, ages and body weights of 212 living monkeys included in the 1985 roundup. Data set II consists of molar wear measurements taken on 2D images of 103 of these monkeys' dental remains. Ordinal logistic regression was used to analyze the first data set. General linear models were used to analyze the second. Results: Males generally exhibited more wear than females at equivalent chronological ages, though results varied by tooth type for the second data set. Male body weight in the full 1985 living sample was significantly related to dental wear, when age was taken into account; however, when males less than eight years of age were eliminated from the sample, the association between dental wear and weight became statistically insignificant. Analysis of the second data set suggested no statistically significant sex difference in dental wear for third molars, despite the approximately two year sex difference in eruption age for this tooth type. Discussion: This study suggests that body weight in males might be a predictor of dental wear and that if it is, body weight might also influence sex differences in dental wear. Sex differences in dental eruption timing do not appear to explain sex differences in dental wear in this sample.

Dental biorhythm is associated with adolescent weight gain.

Background: Evidence of a long-period biological rhythm present in mammalian hard tissue relates to species average body mass. Studies have just begun to investigate the role of this biorhythm in human physiology. Methods: The biorhythm is calculated from naturally exfoliated primary molars for 61 adolescents. We determine if the timing relates to longitudinal measures of their weight, height, lower leg length and body mass collected over 14 months between September 2019 to October 2020. We use univariate and multivariate statistical analyses to isolate and identify relationships with the biorhythm. Results: Participants with a faster biorhythm typically weigh less each month and gain significantly less weight and mass over 14-months, relative to those with a slower biorhythm. The biorhythm relates to sex differences in weight gain. Conclusions: We identify a previously unknown factor that associates with the rapid change in body size that accompanies human adolescence. Our findings provide a basis from which to explore novel relationships between the biorhythm and weight-related health risks.

Dental macrowear, diet, and anterior tooth use in Colobus polykomos and Piliocolobus badius.

Two similarly-sized colobine species living sympatrically in the Ivory Coast's Taï Forest that differ in both diet and oral processing behavior provide an opportunity to explore the strength of associations between feeding behavior and dental wear patterns. Here we test the hypothesis that vigorous processing of tough, hard Pentaclethra macrophylla pods by Colobus polykomos manifests in greater anterior tooth wear relative to that observed in Piliocolobus badius, which does not exploit this resource. We assessed levels of anterior tooth wear in a sample of 160 upper incisors and 131 lower incisors from 18 adult Colobus polykomos and 62 adult Piliocolobus badius naturally deceased individuals from Taï National Park. We operationalized tooth wear by dividing the area of exposed dentin by total occlusal crown area. To assess relative degrees of incisor wear, we regressed incisor wear against molar wear (sample = 105 upper molars, 135 lower molars) for the pooled Colobus polykomos and Piliocolobus badius wear data and compared the number of individuals from each species that fell above and below the pooled regression curve for each model using Chi-square tests of independence and odds ratios. Under our hypothesis, we would expect more Colobus polykomos points above the pooled regression curve than Piliocolobus badius, indicating higher incisor wear relative to molar wear in Colobus polykomos. Nine of sixteen interspecific comparisons demonstrated this predicted pattern; however, none of the Chi-square tests or odds ratios were significant, indicating no difference between Colobus polykomos and Piliocolobusbadius incisor wear relative to molar wear. The absence of significant differences in incisor wear relative to molar wear highlights the challenge of identifying idiosyncratic feeding behavior in fossil taxa and the necessity for continued exploration of the relationship between diet and macrowear.

Reconstructing tooth crown heights and enamel caps: A comparative test of three existing methods with recommendations for their use.

Studies of enamel growth and thickness, whether in paleoanthropology, bioarchaeology, or primatology, require measurements of crown height (CH), cuspal enamel thickness (CET), average (AET), and/or regional enamel thickness (RegAET) on complete, unworn crowns. Yet because fully unworn crowns are uncommon, three methods to bolster sample sizes by reconstructing slightly worn teeth have been developed: Profile, Polynomial, and Pen Tool. Although these methods have been tested for accuracy, no study has yet directly compared the three methods to assess their performance across CH, CET, AET, and RegAET measurements. Moreover, it is currently unclear how accurate the methods are when reconstructing crowns with varying degrees of wear. The present study addresses this gap in our understanding of how these methods perform on four key dental measurements, evaluates the degree of wear for which accurate crown reconstructions can be completed, and offers recommendations for applying these methods. Here, the methods are compared on Paranthropus robustus mandibular molars, a sample chosen because it exhibits variable morphology, presenting a challenge for reconstruction methods. For minimally worn teeth, Profile, Polynomial, and Pen Tool methods can be employed (in that order) for all measurements except CET, which cannot be reliably measured on reconstructions. For teeth with wear that obliterates the nadir of the occlusal basin or dentin horns, CH and AET can be measured using Profile and Polynomial reconstructions; however, no other measurements or methods were reliable. Recommendations provided here will make it possible to increase sample sizes and replicability, enhancing studies of enamel thickness and growth.

Enamel daily secretion rates of deciduous molars from a global sample of children.

OBJECTIVE: To investigate and describe the variation in enamel daily secretion rates (DSRs) of naturally exfoliated deciduous molars (n = 345) from five modern-day populations (Aotearoa New Zealand, Britain, Canada, France, and Sweden). DESIGN: Each tooth was thin sectioned and examined using a high-powered Olympus BX51 microscope and DP25 digital microscope camera. Mean DSRs were recorded for the inner, mid, and outer regions of cuspal and lateral enamel, excluding enamel nearest the enamel-dentin junction and at the outermost crown surface. RESULTS: Mean DSRs did not vary significantly between populations, or by sex. Cuspal enamel grew slightly faster than lateral enamel (mean difference 0.16 µm per day; p < 0.001). The trajectory of DSRs remained relatively constant from inner to outer cuspal enamel and increased slightly in lateral enamel (p = 0.003). CONCLUSIONS: The DSRs of deciduous molars from modern-day children are remarkably consistent when compared among populations. While growth rates are faster in cuspal than lateral enamel, the trajectory of enamel formation changes only slightly from inner to outer regions. The trajectory of DSRs for deciduous molars differs to that of permanent molar enamel, which typically display a steep increase in matrix deposition from inner to outer enamel.

Heterogeneous frailty and the expression of linear enamel hypoplasia in a genealogical population.

OBJECTIVES: Linear enamel hypoplasia (LEH) is a common skeletal marker of physiological stress (e.g., malnutrition or illness) that is studied within and across populations, without reference to familial risk. We examine LEH prevalence in a population with known genealogical relationships to determine the potential influence of genetic heritability and shared environment. METHODS: LEH data of 239 individuals from a single population were recorded from the Ohio State University Menegaz-Bock collection dental casts. All individuals were of known age, sex, and genealogy. Narrow-sense heritability estimates were obtained for LEH presence and count data from all unworn, fully erupted teeth (excluding third molars) using SOLAR (v.8.1.1). Age, sex, and age-sex interaction were included as covariates. Models were re-run with a household effect variable. RESULTS: LEH persists across generations in this study population with moderate, significant heritability estimates for presence in four teeth, and count in four teeth (three teeth were significant for both). When a household effect variable was added, no residual heritability remained for LEH count on any tooth. There was no significant household effect for three of the four teeth that had significant heritability estimates for LEH presence. Age was a significant covariate. Further analyses with birth year data revealed a secular trend toward less LEH. CONCLUSIONS: This study provides evidence for familial risk of LEH (genetic and environmental) that has consequences for the broad use of this skeletal marker of stress. These results have repercussions for archaeological assemblages, or population health studies, where genetic relatives and household groups might be heavily represented.

3D enamel profilometry reveals faster growth but similar stress severity in Neanderthal versus Homo sapiens teeth.

Early life stress disrupts growth and creates horizontal grooves on the tooth surface in humans and other mammals, yet there is no consensus for their quantitative analysis. Linear defects are considered to be nonspecific stress indicators, but evidence suggests that intermittent, severe stressors create deeper defects than chronic, low-level stressors. However, species-specific growth patterns also influence defect morphology, with faster-growing teeth having shallower defects at the population level. Here we describe a method to measure the depth of linear enamel defects and normal growth increments (i.e., perikymata) from high-resolution 3D topographies using confocal profilometry and apply it to a diverse sample of Homo neanderthalensis and H. sapiens anterior teeth. Debate surrounds whether Neanderthals exhibited modern human-like growth patterns in their teeth and other systems, with some researchers suggesting that they experienced more severe childhood stress. Our results suggest that Neanderthals have shallower features than H. sapiens from the Upper Paleolithic, Neolithic, and medieval eras, mirroring the faster growth rates in Neanderthal anterior teeth. However, when defect depth is scaled by perikymata depth to assess their severity, Neolithic humans have less severe defects, while Neanderthals and the other H. sapiens groups show evidence of more severe early life growth disruptions.

An inconstant biorhythm: The changing pace of Retzius periodicity in human permanent teeth.

OBJECTIVES: Human tooth enamel retains evidence of growth in the form of Retzius lines. The number of daily growth increments between the regularly occurring lines defines their repeat interval, or periodicity. Retzius periodicity is often incorporated into enamel formation times, age-at-death reconstructions, or used to provide a basis from which to explore an underlying biorhythm. Biological anthropologists typically assume that RP remains constant within an individual and does not vary along the tooth-row. Here, we test that assumption. MATERIALS AND METHODS: RP was calculated from n = 223 thin sections of human permanent teeth from individuals of British and southern African origin. Forty individuals provided multiple teeth (n = 102 teeth) and a further 121 individuals each provided a single tooth. RESULTS: We report first evidence that RP of permanent teeth does not always remain constant within an individual. Of those individuals that provided multiple teeth, 42% (n = 17/40) demonstrated a decrease in RP along the tooth row, with most shifting by two or more days (n = 11). Across the entire sample, mean RP of anterior teeth was significantly higher than molars. Mean premolar RP tended to be intermediate between anterior teeth and molars. DISCUSSION: Our data do not support the assumption that RP invariably remains constant within the permanent teeth of an individual. Transferring RP from molars to incisors within an individual can result in a miscalculation of formation time and age-at-death by up to 1 year. Implications for biological anthropologists and the source of the underlying long period biorhythm are discussed.

Conceptual Design and Prototyping for a Primate Health History Knowledge Model.

Primate models are important for understanding human conditions, especially in studies of ageing, pathology, adaptation, and evolution. However, how to integrate data from multiple disciplines and render them compatible with each other for datamining and in-depth study is always challenging. In a long-term project, we have started a collaborative research endeavor to examine the health history of a free-ranging rhesus macaque colony at Cayo Santiago, and build a knowledge model for anthropological and biomedical/translational studies of the effects of environment and genetics on bone development, aging, and pathologies. This paper discusses the conceptual design as well as the prototyping of this model and related graphical user interfaces, and how these will help future scientific queries and studies.

A structural biorhythm related to human sexual dimorphism.

Life on earth is regulated by biological rhythms, some of which oscillate with a circadian, monthly or lunar cycle. Recent research suggests that there is a near weekly biorhythm that may exert an influence on human skeletal growth. Evidence for the timing of this biorhythm is retained in tooth enamel as the periodicity of Retzius lines. Studies report that Retzius periodicity (RP) relates to adult human stature and enamel thickness. Adult human stature is sexually dimorphic, and so is enamel thickness of maxillary third molars (M3) but not mandibular M3. Yet, previous studies report sex differences in RP are apparent in some populations but not others, and it is unknown if dimorphism in enamel thickness relates to RP. To further our understanding of this biorhythm we analysed sex-related variation in RP and its relationship with enamel thickness in a sample of M3's (n = 94) from adults in Northern Britain. Results reveal RP was significantly higher in our sample of female molars compared to those of males, which is consistent with the previously reported correlation between the biorhythm and adult stature. The RP of maxillary M3 related to sex differences in enamel thickness, but this relationship was not present in mandibular M3. Our results support previous findings suggesting that this biorhythm is sexually dimorphic and provide the first evidence that RP may be one factor influencing sex differences in enamel thickness. Our study also shows that correlations between RP and enamel thickness appear to be most readily detected for tooth types with sufficiently wide ranges of enamel thickness variation, as is the case for maxillary but not mandibular M3. Achieving a sufficient sample size was critical for detecting a sex difference in periodicity.

Enamel chipping in Taï Forest cercopithecids: Implications for diet reconstruction in paleoanthropological contexts.

Antemortem enamel chipping in living and fossil primates is often interpreted as evidence of hard-object feeding (i.e., 'durophagy'). Laboratory analyses of tooth fracture have modeled the theoretical diets and loading conditions that may produce such chips. Previous chipping studies of nonhuman primates tend to combine populations into species samples, despite the fact that species can vary significantly in diet across their ranges. Chipping is yet to be analyzed across population-specific species samples for which long-term dietary data are available. Here, we test the association between enamel chipping and diet in a community of cercopithecid primates inhabiting the Taï Forest, Ivory Coast. We examined fourth premolars and first molars (n = 867) from naturally deceased specimens of Cercocebus atys, Colobus polykomos, Piliocolobus badius,Procolobus verus, and three species of Cercopithecus. We found little support for a predictive relationship between enamel chipping and diet across the entire Taï monkey community. Cercocebus atys, a dedicated hard-object feeder, exhibited the highest frequencies of (1) chipped teeth and (2) chips of large size; however, the other monkey with a significant degree of granivory, Co. polykomos, exhibited the lowest chip frequency. In addition, primates with little evidence of mechanically challenging or hard-food diets-such as Cercopithecus spp., Pi. badius, and Pr. verus-evinced higher chipping frequencies than expected. The equivocal and stochastic nature of enamel chipping in the Taï monkeys suggests nondietary factors contribute significantly to chipping. A negative association between canopy preference and chipping suggests a role of exogenous particles in chip formation, whereby taxa foraging closer to the forest floor encounter more errant particulates during feeding than species foraging in higher strata. We conclude that current enamel chipping models may provide insight into the diets of fossil primates, but only in cases of extreme durophagy. Given the role of nondietary factors in chip formation, our ability to reliably reconstruct a range of diets from a gradient of chipping in fossil taxa is likely weak.

Faster growth corresponds with shallower linear hypoplastic defects in great ape canines.

Deeper or more 'severe' linear enamel hypoplasia (LEH) defects are hypothesized to reflect more severe stress during development, but it is not yet clear how depth is influenced by intrinsic enamel growth patterns. Recent work documented inter- and intraspecific differences in LEH defect depth in extant great apes, with mountain gorillas having shallower defects than other taxa, and females having deeper defects than males. Here, we assess the correspondence of inter- and intraspecific defect depth and intrinsic aspects of enamel growth: enamel extension rates, outer enamel striae of Retzius angles, and linear enamel thickness. Thin sections of great ape canines (n = 40) from Gorilla beringei beringei, Gorilla gorilla gorilla, Pan troglodytes, and Pongo spp. were analyzed. Enamel extension rates were calculated within deciles of enamel-dentine junction length. Linear enamel thickness and the angle of intersection between striae of Retzius and the outer enamel surface were measured in the imbricational enamel. Mountain gorillas have faster enamel extension rates and shallower striae angles than the other taxa examined. Mountain gorillas have thinner imbricational enamel than western lowland gorillas and orangutans, but not chimpanzees. In the combined-taxon sample, females exhibit larger striae angles and thicker imbricational enamel than males. Enamel extension rates are highly negatively correlated with striae angles and LEH defect depth. Enamel growth variation corresponds with documented inter- and intraspecific differences in LEH defect depth in great ape canines. Mountain gorillas have shallower striae angles and faster extension rates than other taxa, which might explain their shallow LEH defect morphology and the underestimation of their LEH prevalence in previous studies. These results suggest that stressors of similar magnitude and timing might produce defects of different depths in one species or sex vs. another, which has implications for interpretations of stress histories in hominins with variable enamel growth patterns.

First systematic assessment of dental growth and development in an archaic hominin (genus, Homo) from East Asia.

Several human dental traits typical of modern humans appear to be associated with the prolonged period of development that is a key human attribute. Understanding when, and in which early hominins, these dental traits first appeared is thus of strong interest. Using x-ray multiresolution synchrotron phase-contrast microtomography, we quantify dental growth and development in an archaic Homo juvenile from the Xujiayao site in northern China dating to 161,000-224,000 years or 104,000-125,000 years before present. Despite the archaic morphology of Xujiayao hominins, most aspects of dental development of this juvenile fall within modern human ranges (e.g., prolonged crown formation time and delayed first molar eruption). For its estimated age-at-death (6.5 years), its state of dental development is comparable to that of equivalently aged modern children. These findings suggest that several facets of modern human dental growth and development evolved in East Asia before the appearance of fully modern human morphology.