The Spatial Relationship Between Coronoid Process and Zygomatic Complex After Reduction Malarplasty.

BACKGROUND: Reduction malarplasty presents challenges in terms of postoperative complications, particularly limited mouth opening. Excessive inward displacement of the zygomatic complex can impinge on the coronoid process resulting in restricted mouth opening. This study aimed to assess the spatial relationship between the coronoid process and the zygomatic complex after reduction malarplasty. METHODS: A retrospective study was conducted, including consecutive patients underwent reduction malarplasty. Radiological measurements were performed before surgery and during the final follow-up, including the coronoid-condylar index, distance between the coronoid process and zygomatic complex, and thickness and density of the temporal and masseter muscles. Clinical and radiographic data were recorded and analyzed. RESULTS: A total of 159 female patients were included with an average age of 28.1 years and a mean follow-up of 6.7 months. The mean coronoid-condylar index was 1:1.4, ranging from 1:0.6 to 1:2.6. Following surgery, the distances between the coronoid process and the anterior zygoma decreased by approximately 1 mm. Additionally, the postoperative distance between the highest point of the coronoid process and the zygomatic arch decreased by around 4 mm horizontally and changed approximately 1 mm vertically. No significant changes were observed in the thickness and density of the temporal and masseter muscles after surgery. CONCLUSIONS: Reduction malarplasty led to a slight decrease in the distance between the coronoid process and the zygoma. The operation generally resulted in proximity between the highest point of the coronoid process and the zygomatic arch. However, we believe that common reduction malarplasty rarely leads to osseous impingement. LEVEL OF EVIDENCE IV: This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266.

Current progress in chimeric antigen receptor-modified T cells for the treatment of metastatic breast cancer.

Breast cancer is the leading cancer in women. Around 20-30% breast cancer patients undergo invasion or metastasis after radical surgical resection and eventually die. Number of breast cancer patients show poor sensitivity toward treatments despite the advances in chemotherapy, endocrine therapy, and molecular targeted treatments. Therapeutic resistance and tumor recurrence or metastasis develop with the ongoing treatments. Conducive treatment strategies are thus required. Chimeric antigen receptor (CAR)-modified T-cell therapy has progressed as a part of tumor immunotherapy. However, CAR-T treatment has not been effective in solid tumors because of tumor microenvironment complexity, inhibitory effects of extracellular matrix, and lacking ideal tumor antigens. Herein, the prospects of CAR-T cell therapy for metastatic breast cancer are discussed, and the targets for CAR-T therapy in breast cancer (HER-2, C-MET, MSLN, CEA, MUC1, ROR1, EGFR) at clinical level are reviewed. Moreover, solutions are proposed for the challenges of breast cancer CAR-T therapy regarding off-target effects, heterogeneous antigen expression by tumor cells and immunosuppressive tumor microenvironment. Ideas for improving the therapeutics of CAR-T cell therapy in metastatic breast cancer are suggested.

Reconstructive Operation of Severe Orbital Hypertelorism With Computer-Assisted Precise Virtual Plan.

Orbital hypertelorism correction is still a less precise procedure, with a simple preoperative design and surgical results often depending on the operator's experience. In recent years, computer-assisted technology has been fully utilized in craniofacial surgery. This article aims to explore the clinical results of computer-assisted technology in orbital hypertelorism correction and discuss its advantages and effects on treatment. Four patients with orbital hypertelorism underwent intracranial and extracranial combined box osteotomy correction. Preoperative computed tomography scans were performed, and 3-dimensional 3D digital technology was used to measure the orbital spacing, virtually design the 3D cutting scheme, and guide the intraoperative 3D cutting to improve the accuracy of periorbital osteotomy and reduce the surgical risk. Four patients underwent successful surgery, and the average distance of the medial orbital wall was decreased from 43.6 to 23.4 mm. Computer-assisted box osteotomy shortens the operative time and provides better corrective results.

Stab access fascia suspension lift: A facelift technique without skin excision and visible scar.

BACKGROUND: Traditional middle and lower facelifts are not suitable for patients with mild skin laxity or who wish to avoid incision scars. OBJECTIVE: We present the stab access fascia suspension lift (SAFS-lift) technique, which does not require regular skin incisions, as a reliable surgical facelift strategy for the lower and middle face. METHODS: From September 2020 to September 2021, 38 patients underwent SAFS-lift. SAFS-lift involved (1) incomplete subcutaneous undermining with hydrodissection-assisted tunneling; (2) complete subcutaneous undermining with a dissecting cannula in the zygomatic buccal groove area and hollow below zygomatic arch; and (3) maximal firm superficial musculoaponeurotic system suspension with polydioxanone barbed threads in loops. All patients evaluated the outcome according to the Global Aesthetic Improvement Scale. Four plastic surgeons evaluated postsurgery result with a five-point Likert scale (5 = excellent, 4 = good, 3 = fair, 2 = no change, and 1 = worse). RESULTS: Thirty-six patients were successfully enrolled. The mean follow-up period was 14.72 ± 3.89 months. No patients showed visible scarring 6 months after surgery. The minor complication rate was 19.4%. They all subsided within 1-6 weeks without treatment. No infection, hematoma, seroma, or facial nerve injury was observed. Patients' outcome ratings were 4.22 ± 0.58 (3 months), 4.69 ± 0.46 (6 months), and 4.69 ± 0.54 (1 year). Surgeons' outcome scoring was 3.98 ± 0.95. CONCLUSIONS: Stab access fascia suspension-lift is a predictable, effective, and safe facelift technique that can be performed without making noticeable incisions and resecting the skin.

Clinical application status and prospect of the combined anti-tumor strategy of ablation and immunotherapy.

Image-guided tumor ablation eliminates tumor cells by physical or chemical stimulation, which shows less invasive and more precise in local tumor treatment. Tumor ablation provides a treatment option for medically inoperable patients. Currently, clinical ablation techniques are widely used in clinical practice, including cryoablation, radiofrequency ablation (RFA), and microwave ablation (MWA). Previous clinical studies indicated that ablation treatment activated immune responses besides killing tumor cells directly, such as short-term anti-tumor response, immunosuppression reduction, specific and non-specific immune enhancement, and the reduction or disappearance of distant tumor foci. However, tumor ablation transiently induced immune response. The combination of ablation and immunotherapy is expected to achieve better therapeutic results in clinical application. In this paper, we provided a summary of the principle, clinical application status, and immune effects of tumor ablation technologies for tumor treatment. Moreover, we discussed the clinical application of different combination of ablation techniques with immunotherapy and proposed possible solutions for the challenges encountered by combined therapy. It is hoped to provide a new idea and reference for the clinical application of combinate treatment of tumor ablation and immunotherapy.

Three-dimensional measurements on the mandible of patients with hemifacial microsomia.

BACKGROUND: Hemifacial microsomia (HFM), which involves multiple sites with different levels of severity, is the second most common congenital craniofacial deformity after cleft lip and palate. However, three-dimensional (3D) measurements of mandibular deformities have not yet been studied in detail. The objective of this study is to investigate the method of 3D measurements of mandibular deformities in HFM patients. METHODS: A total of 48 HFM patients were included in this study. All clinical treatment for patients was performed in the Plastic Surgery Hospital of the Chinese Academy of Medical Sciences at Peking Union Medical College from June 2006 to June 2020. The patients' 3D computerized tomography scan data were processed using medical imaging software, following four iterative steps: 3D reconstruction, mirroring, differential analysis, and partition. RESULTS: The characteristics of the mandibular bone in HFM patients are mainly presented as follows: (1) compared to the normal side, the part of the bone body that extends from the ascending ramus to the pogonion (Po-NB) is analyzed using a dynamic process: less fullness-fullness-more fullness; (2) absences were frequently observed among the angular zones, that is, the height of the ascending ramus is deficient. CONCLUSIONS: HFM is a complicated condition with numerous variations in clinical presentation. We employed both 3D image reconstruction and computerization image processing techniques to investigate asymmetrical mandibular deformity in HFM patients in detail and with great accuracy. This will be of great use to clinicians for disease management.

Computer-assisted mandibular curved osteotomy: An automatic method to design the new aesthetic gonion and osteotomy line.

BACKGROUND: Digital technology has been widely used in mandibular curved osteotomy to improve accuracy. However, the planning process still highly dependent on the experience and judgement of the surgeon. This study describes an automatic method to design the new gonion and osteotomy line based on the aesthetic standards in attractive women, and assesses its clinical outcomes. METHODS: An automatic surgical planning method for mandibular curved osteotomy was developed based on our previous research of mandibular angle aesthetics. A prospective clinical study was conducted from April 2016 to April 2018. Twenty-five female patients with prominent mandibular angle were enrolled. Pre- and postoperative skull computed tomography (CT) was performed. Three-dimensional (3D) CT data were obtained and processed by Mimics 18.0. Surgical templates were designed according to the automatic surgical planning method and 3D printed for the surgery. Preoperative measurements, surgical simulation and postoperative measurements were taken to evaluate the surgical outcomes. RESULTS: There were significant differences between the preoperative and the postoperative groups' results (p < 0.01). There was no difference between the surgical simulation and the postoperative results. All postoperative measurements were consistent with aesthetic features of mandibles. Patients were satisfied with their outcomes in terms of outline, symmetry and lower facial width. CONCLUSIONS: Our study developed an automatic method to position the new aesthetic gonion and osteotomy line for prominent mandibular angle patients. We proved that this method is safe, effective and reliable.

Characteristics of the Sphenoid Bone in Crouzon Syndrome.

BACKGROUND: The goal of this study is to analyze the safety of reconstructive surgeries for Crouzon syndrome, and to understand the deformities and complications related to the surgical procedure. METHODS: Thirty-nine subjects underwent preoperative computed tomographic scans were included (Crouzon, n = 19; controls, n = 20) in this study. Craniofacial cephalometric measurements were analyzed by Materialise software. RESULTS: The overall average distance from the pterygoid junction to the coronal plane in the patients with Crouzon syndrome was 21.34 mm (standard deviation [SD] 5.13), which was deeper than that in the controls by 35% (P = 0.000).The overall average distances between the left and right foramen ovale and pterion on the sphenoid bone in the subjects were 64.93 mm (SD 7.56) and 67.83 mm (SD 8.57), which were increased by 13% (P = 0.001) and 14% (P = 0.001) compared with those in the controls.The overall distances between the most inferior point of the left and right lateral pterygoid plate and the medial pterygoid plate in the subjects were 51.09 mm (SD 6.68) and 51.51 mm (SD 10.98), which was not statically different from the controls (P = 0.887, P = 0.991, respectively). CONCLUSIONS: This study characterized the surgically relevant anatomy of the sphenoidal bone. The pterygomaxillary junction is located in the posterior of the skull. Though there are some anatomical differences due to age, it is well known that the cranial cavity of the sphenoid side is likely to be enlarged in Crouzon syndrome, which may contribute to the other complications of the disease.

S-Type Posterolateral Approach for Open Reduction and Internal Fixation of Pronation External Rotation Ankle Fractures: Improved Visualisation of the Posterior Joint and the Lateral Malleolus.

Pronation external rotation (PER) fractures are unstable ankle fractures that require anatomically stable fixation. However, due to the long distance between the fibula and the posterior malleolus in PER IV, existing approaches may make it difficult for the fixation of the associated posterior joint and the lateral malleolus. We describe an S-type posterolateral approach for the open reduction and internal fixation of posterior malleolar fractures with an associated lateral malleolar fracture in PER IV.

Preparation and characterization of ZnO/PEG-Co(II)-PbO2 nanocomposite electrode and an investigation of the electrocatalytic degradation of phenol.

A ZnO/PEG (polyethylene glycol) -Co(II)-PbO2 nanocomposite electrode was constructed by using the anodic electrodeposition method and used for the electrocatalytic degradation phenol. The results showed that the electrode surface formed numerous PbO2 nanosphere structures, and the average size of a single nanosphere is approximately 0.4 µm. XRD and EDS results showed the active layer consisted of ß-PbO2, and contained small amounts of cobalt and carbon. The electrochemical measurements showed that the electrode possessed a lower activation energy (Ea = 17.517 kJ∙mol-1) and charge transfer resistance (Rct = 7.564 Ω cm2) and a larger exchange current density (i°=1.476 × 10-4 mA cm-2). The phenol degradation process was controlled by the adsorption process and kinetic parameters were obtained with an initial concentration of 100 mg L-1. The electrode possessed a shorter half-life, larger reaction rate constant, and degradation efficiency (RE = 91.1 %) after 180 min. Reaction order was also calculated, and the degradation followed the pseudo-first-order reaction kinetics. HPLC results showed that the degradation pathway is as follows: firstly, phenol is gradually decomposed into o-diphenol, p-diphenol and benzoquinone under hydroxyl radicals attack. Then, benzoquinone is broken into maleic acid and fumaric acid. Finally, these acidic compounds are broken into oxalic acid, which is eventually mineralized.

Repairing Cranial Defect With Autogenous Mandibular Outer Plate.

BACKGROUND: Autogenous bone is the best material in cranioplasty because of biological advantages. Previously, skull, rib, ilium, and fibula have been used in the reconstruction of cranial defects. However, the application of autologous mandibular outer plate in the treatment of skull defect is rarely reported. This study evaluated the application of the autogenous mandibular outer plate in the reconstruction of cranial defect. METHODS: Eleven patients who underwent cranioplasty with mandibular outer plate were recruited. Three-dimensional tomography data were collected to calculate the preoperative, immediate postoperative, and long-term follow-up volume of the bone graft area and donor bone site, and then the absorption rate and the regeneration rate of autogenous bone were analyzed. RESULTS: The majority of the patients were satisfied with the reconstructive outcome. There are statistical differences in the volumetric measurements of the bone graft area and bone donor site at different time periods (P<0.05). The mean absorptivity of mandibular outer plate implanted in the cranial defect area was (17.30 ±â€Š5.03)% after 3 to 24 months postoperatively, the average regeneration rate of mandibular outer plate volume was (41.65 ±â€Š9.85)% at the same period. CONCLUSION: This report shows that the cranioplasty with mandibular outer plate bone graft may be an optional surgical procedure.

DOES IT WORK? -a randomized controlled trial to test the efficacy of HCV and HIV-related education on drug users in MMT, China.

BACKGROUND: HCV (Hepatitis C virus) is a prevalent chronic disease with potentially deadly consequences, especially for drug users. However, there are no special HCV or HIV (human immunodeficiency virus)-related intervention programs that are tailored for drug users in China; to fill this gap, the purpose of this study was to explore HCV and HIV-related knowledge among drug users in MMT (methadone maintenance treatment) sites of China and to investigate the effectiveness of HCV and HIV-related education for improving the knowledge of IDUs (injection drug users) and their awareness of infection. METHODS: The study was a randomized cluster controlled trial that compared a usual care group to a usual care plus HCV/HIV-REP (HCV/HIV-Reduction Education Program) group with a 24-week follow-up. The self-designed questionnaires, the HCV- and HIV-related knowledge questionnaire and the HIV/HCV infection awareness questionnaire, were used to collect the data. Four MMT clinics were selected for this project; two MMT clinics were randomly assigned to the research group, with subjects receiving their usual care plus HCV/HIV-REP, and the remaining two MMT clinics were the control group, with subjects receiving their usual care over 12 weeks. Sixty patients were recruited from each MMT clinic. A total of 240 patients were recruited. Follow-up studies were conducted at the end of the 12th week and the 24th week after the intervention. RESULTS: At baseline, the mean score (out of 20 possible correct answers) for HCV knowledge among the patients in the group receiving the intervention was 6.51 (SD = 3.5), and it was 20.57 (SD = 6.54) for HIV knowledge (out of 45 correct answers) and 8.35 (SD = 2.8) for HIV/HCV infection awareness (out of 20 correct answers). At the 12-week and 24-week follow-up assessments, the research group showed a greater increase in HCV-/HIV-related knowledge (group × time effect, F = 37.444/11.281, P < 0.05) but no difference in their HIV/HCV infection awareness (group × time effect, F = 2.056, P > 0.05). CONCLUSION: An MMT-based HCV/HIV intervention program could be used to improve patient knowledge of HCV and HIV prevention, but more effort should be devoted to HIV/HCV infection awareness. TRIAL REGISTRATION: Protocols for this study were approved by institution review board (IRB) of Shanghai Mental Health Center (IRB:2009036), and registered in U.S national institutes of health (http://www.clinicaltrials.gov, NCT01647191 ). Registered 23 July 2012.

Assessment of a Novel Standardized Training System for Mandibular Contour Surgeries.

IMPORTANCE: Mandibular contour surgeries (MCS) involving reduction gonioplasty and genioplasty are rewarding for patients with square faces; however, the procedure has inherently difficult clinician learning curves and unpredictable skill acquisitions. To our knowledge, there has been no effective, validated training model that might improve training and surgical outcomes for MCS. OBJECTIVE: To establish and evaluate a standardized intraoral MCS training system. DESIGN, SETTING, AND PARTICIPANTS: Intraoral MCS training models were constructed by 3-dimensional (3D) skull models covered with elastic head cloths. From April 2016 to April 2018, 90 consecutive MCS patients (30 per group) and 15 craniofacial surgery fellow physicians (5 per group) were enrolled in the prospective observational study. They were randomly divided into intervention groups (A and B) and a control group (C). Intervention groups A and B completed 5 training sessions on the intraoral MCS training models before each clinical case. Group A performed both the model training sessions and clinical surgeries with surgical templates. Control group C had no extra training before clinical surgeries. All groups completed clinical surgery under supervision on 6 patients. The duration of follow-up was at least 3 months postoperatively. INTERVENTIONS: Intraoral MCS training models were provided to intervention groups (A and B) before clinical surgeries. Surgical templates were provided to intervention group A both in training sessions and clinical surgeries. MAIN OUTCOMES AND MEASURES: The completion time, surgical accuracy, learning curves, operating confidence, surgical skill, and outcome satisfaction of each procedure were recorded and analyzed with paired t test and 1-way analysis of variance test by blinded observers. RESULTS: All 90 patients (14 men, 76 women; mean [SD] age, 26 [5] years) were satisfied with their postoperative mandible contours. The intervention groups (A and B), especially the group with surgical templates (A) showed improvements in clinical surgery time (mean [SD], group A 147.2 [24.71] min; group B, 184.47 [16.28] min; group C, 219.3 [35.3] min; P = .001), surgical accuracy (mean [SD], group A, 0.68 [0.22] mm; group B, 1.22 [0.38] mm; group C, 1.88 [0.54] mm; P < .001), learning curves, and operators' confidence and surgical skill. CONCLUSIONS AND RELEVANCE: The intraoral MCS training model was effective and practical. The optimal intraoral MCS training system included intraoral MCS training models and surgical templates. The system significantly decreased clinical surgery time, improved surgical accuracy, shortened the learning curve, boosted operators' confidence, and was associated with better acquisition of surgical skills. LEVEL OF EVIDENCE: NA.

Mandibular Augmentation With a New Sandwich Osteotomy: A Morphologic Study.

OBJECTIVE: Facial asymmetry is one of common complaints in plastic and craniofacial surgery in Orient. Hemimandibular dysplasia has considered to be the key role in facial asymmetry. Despite of the undergrow of mandibular length and height, the lackness of mandibular thickness contributes to the asymmetry. The aim of this study was to describe the therapeutic efficiency of mandibular augmentation with a new sandwich osteotomy with interpositional natural coral and coralline hydroxyapatite (CHA). METHODS: Nine goats were randomly divided into 3 groups and observed at 6, 12, and 18 months after surgery. All goats received splitting of bilateral mandibular outer cortex and interpositional grafting with natural coral and CHA, respectively (sandwich osteotomy). Data were evaluated and statistically analyzed by t-test. RESULTS: All goats were observed at 3 different time points. The computed tomography images show that the area of operation was healed and the thickness of the mandible was increased in 3 time points. In the 3 groups, mandibular thickness and volume were significantly different compared with those before operation (P < 0.05). The volume of CHA group improved better than coral group (P < 0.05). CONCLUSION: This study provides a promising alternative method for mandibular augmentation with a sandwich osteotomy and interpositional grafting with natural coral and CHA. The thickness and volume of mandible had been effectively increased in follow-ups.

An Effective Simulator for Intraoral Facial Skeletal Contour Surgeries.

BACKGROUND: In East Asia, intraoral facial skeletal contour surgeries (intraoral FSCSs), including reduction gonioplasty, reduction malarplasty, and genioplasty, have become increasingly popular. Nonetheless, intraoral FSCSs are technically difficult and have a steep learning curve. An effective simulator could be beneficial for intraoral FSCS training. However, there is no intraoral FSCS simulator available. We introduced an intraoral FSCS simulator and assessed its effectiveness. METHODS: An intraoral FSCS simulator was established by covering a 3-dimensional printed skull with elastic cloth. Twenty residents were enrolled and randomly divided into experimental group A and control group B. Group A performed the intraoral FSCS on the simulator for 3 times. Group B performed the intraoral FSCS on skull model for 3 times. The intraoral FSCS simulator and trainees' performance were evaluated by a trainee-reported questionnaire before and after training, the surgical outcomes were graded by 3 senior attending physicians. All questions and the surgical outcome were scored based on a 5-point Likert scale (1 = very poor, 5 = very good). The surgical times were recorded. RESULTS: The intraoral FSCS simulator (4.13 ± 0.64) simulated the surgical reality significantly better than the skull (2.6 ± 0.63). In intraoral FSCS simulator training, the restriction and compliance of the facial soft tissue were vividly mimicked (4.4 ± 0.51); the intraoral approach was vividly mimicked (4.07 ± 0.59). The intraoral FSCS simulator is significantly superior to the skull in improving participants' confidence in performing intraoral FSCS, power system control, and intraoral approach adoption (<0.001). The average surgical outcome score was 3.11 ± 0.45 in group A and 3.91 ± 0.24 in group B. The average surgical time was 177.78 ± 28.38 minutes in group A and 65.26 ± 15.38 minutes in group B. CONCLUSIONS: We developed the first intraoral FSCS simulator and proved its effectiveness preliminarily. Randomized controlled study with clinical cases is needed to further test its effectiveness.

Zygomatic Nonunion: A Misunderstood Complication of Reduction Malarplasty.

Reduction malarplasty is a popular facial skeletal contour surgery in East Asia. Zygomatic nonunion is a reported complication. However, it is often misunderstood and misdiagnosed. Here we present typical misdiagnosed zygomatic nonunion cases, propose and preliminarily clarify 4 major misunderstandings of zygomatic nonunion: diagnostic standard, the cause, the incidence, and the prognosis of zygomatic nonunion.

The GWAS Risk Genes for Depression May Be Actively Involved in Alzheimer's Disease.

Depression is one of the most frequent psychiatric symptoms observed in people during the development of Alzheimer's disease (AD). We hypothesized that genetic factors conferring risk of depression might affect AD development. In this study, we screened 31 genes, which were located in 19 risk loci for major depressive disorder (MDD) identified by two recent large genome-wide association studies (GWAS), in AD patients at the genomic and transcriptomic levels. Association analysis of common variants was performed by using summary statistics of the International Genomics of Alzheimer's Project (IGAP), and association analysis of rare variants was conducted by sequencing the entire coding region of the 31 MDD risk genes in 107 Han Chinese patients with early-onset and/or familial AD. We also quantified the mRNA expression alterations of these MDD risk genes in brain tissues of AD patients and AD mouse models, followed by protein-protein interaction network prediction to show their potential effects in AD pathways. We found that common and rare variants of L3MBTL2 were significantly associated with AD. mRNA expression levels of 18 MDD risk genes, in particular SORCS3 and OAT, were differentially expressed in AD brain tissues. 13 MDD risk genes were predicted to physically interact with core AD genes. The involvement of HACE1, NEGR1, and SLC6A15 in AD was supported by convergent lines of evidence. Taken together, our results showed that MDD risk genes might play an active role in AD pathology and supported the notion that depression might be the "common cold" of psychiatry.

Three-Dimensional Analysis of Mandibular Angle Classification and Aesthetic Evaluation of the Lower Face in Chinese Female Adults.

BACKGROUND: Reduction gonioplasty is very popular in East Asia. However, there has been little quantitative criteria for mandibular angle classification or aesthetics. The aim of this study was to investigate the quantitative differences of mandibular angle types and determine the morphologic features of mandibular angle in attractive women. METHODS: We created a database of skull computed tomography and standardized frontal and lateral photographs of 96 Chinese female adults. Mandibular angle was classified into 3 groups, namely, extraversion, introversion, and healthy group, based on the position of gonion. We used a 5-point Likert scale to quantify attractiveness based on photographs. Those who scored 4 or higher were defined as attractive women. Three types of computed tomography measurements of the mandible were taken, including 4 distances, 4 angles, and 3 proportions. Discriminant analysis was applied to establish a mathematic model for mandibular angle aesthetics evaluation. RESULTS: Significant differences were observed between the different types of mandibular angle in lower facial width (Gol-Gor), mandibular angle (Co-Go-Me), and gonion divergence angle (Gol-Me-Gor) (P < 0.01). Chinese attractive women had a mandibular angle of 123.913 ± 2.989 degrees, a FH-MP of 27.033 ± 2.695 degrees, and a Go-Me/Co-Go index of 2.0. The "healthy" women had a mandibular angle of 116.402 ± 5.373 degrees, a FH-MP of 19.556 ± 5.999 degrees, and a Go-Me/Co-Go index of 1.6. The estimated Fisher linear discriminant function for the identification of attractive women was as follows: Y = -0.1516X1(Co-Go) + 0.128X2(Go-Me) + 0.04936X3(Co-Go-Me) +0.0218X4(FH-MP). CONCLUSIONS: Our study quantified the differences of mandibular angle types and identified the morphological features of mandibular angle in attractive Chinese female adults. Our results could assist plastic surgeons in presurgical designing of new aesthetic gonion and help to evaluate lower face aesthetics.

Interpositional Arthroplasty by Temporalis Fascia Flap and Galea Aponeurotica Combined With Distraction Osteogenesis: a Modified Method in Treatment of Adult Patients With Temporomandibular Joint Ankylosis and Mandibular Dysplasia.

BACKGROUND: Interpositional arthroplasty (IPA) with temporalis fascia flap has been one of the most frequently performed procedures to treat temporomandibular joint (TMJ) ankylosis. However, recurrence often occurs when the flap lacks bulk or atrophies. Whether to perform IPA or distraction osteogenesis (DO) first has long been a controversial issue when patients presented mandibular dysplasia (MD). This study provided IPA a new graft material sufficient to prevent recurrence, combined the modified protocol of performing DO 6 months after IPA, and evaluated its efficacy in treating TMJ ankylosis patients with MD. METHODS: Six patients with unilateral TMJ ankylosis and MD were treated in the authors' study. The temporalis fascia flap and part of adjacent galea aponeurotica were filled the space after surgical release. Mouth-opening exercises started immediately post-IPA. Distraction osteogenesis was performed 6 months after IPA and had a 4-month consolidation. The maximum interincisal distance at preoperative, immediately post-IPA and the latest follow-up were recorded, as was the distraction length. The body mass index was measured at each patient's postoperative visit. RESULT: All patients had significant improvements in facial aesthetic, mouth-opening, and occlusion. No major complication or recurrence was observed at 3 to 4 years' follow-up. The mean maximum interincisal distance was 4.83 ±â€Š2.79 mm preoperative and 35.67 ±â€Š3.39 mm at the latest follow-up. The mean distraction distance was 16.17 ±â€Š5.98 mm. The body mass index improved from 17.33 ±â€Š0.64 kg/m preoperative to 18.75 ±â€Š0.60 kg/m before DO. CONCLUSIONS: Temporalis fascia flap and adjacent galea aponeurotica as new graft materials are recommended for IPA. The modified staged treatment proved to be reliable and effective to prevent recurrence, improve mandibular length and final occlusion.

Macrophages in keloid are potent at promoting the differentiation and function of regulatory T cells.

The mechanistic details of keloid formation are still not understood. Given that the immune system is engaged in skin lesion repair, we examined the CD14+ macrophages and CD3+ T cells in keloid tissues and in the normal skin. Compared to the normal skin, keloid tissues presented significantly elevated infiltration by CD14+ macrophages. Moreover, the transcription and protein expression of iNOS, IL-12, IL-10, and TGF-ß were significantly higher in keloid macrophages than in normal skin macrophages, in which the expression of M2-associated genes were further elevated compared to M1-associated genes in keloid. We also observed that keloid tissues presented higher infiltration by CD3+ T cells, of which the majority was CD4+ T cells. Notably, the frequency of Foxp3+ regulatory T cells (Tregs) in keloid tissues was significantly higher compared to that in the peripheral blood. Furthermore, macrophages from keloid tissues possessed potent capacity to induce Foxp3 expression in circulating CD3+ T cells. Together, this study suggested that macrophages in keloid tissues presented high activation status and were polarized toward the M2 subtype; moreover, these macrophages could promote Treg differentiation by upregulating Foxp3 expression.