Vascular smooth muscle-specific LRRC8A knockout ameliorates angiotensin II-induced cerebrovascular remodeling by inhibiting the WNK1/FOXO3a/MMP signaling pathway.

Hypertensive cerebrovascular remodeling involves the enlargement of vascular smooth muscle cells (VSMCs), which activates volume-regulated Cl- channels (VRCCs). The leucine-rich repeat-containing family 8 A (LRRC8A) has been shown to be the molecular identity of VRCCs. However, its role in vascular remodeling during hypertension is unclear. In this study, we used vascular smooth muscle-specific LRRC8A knockout (CKO) mice and an angiotensin II (Ang II)-induced hypertension model. The results showed that cerebrovascular remodeling during hypertension was ameliorated in CKO mice, and extracellular matrix (ECM) deposition was reduced. Based on the RNA-sequencing analysis of aortic tissues, the level of matrix metalloproteinases (MMPs), such as MMP-9 and MMP-14, were reduced in CKO mice with hypertension, which was further verified in vivo by qPCR and immunofluorescence analysis. Knockdown of LRRC8A in VSMCs inhibited the Ang II-induced upregulation of collagen I, fibronectin, and matrix metalloproteinases (MMPs), and overexpression of LRRC8A had the opposite effect. Further experiments revealed an interaction between with-no-lysine (K)-1 (WNK1), which is a "Cl--sensitive kinase", and Forkhead transcription factor O3a (FOXO3a), which is a transcription factor that regulates MMP expression. Ang II induced the phosphorylation of WNK1 and downstream FOXO3a, which then increased the expression of MMP-2 and MMP-9. This process was inhibited or potentiated when LRRC8A was knocked down or overexpressed, respectively. Overall, these results demonstrate that LRRC8A knockout in vascular smooth muscle protects against cerebrovascular remodeling during hypertension by reducing ECM deposition and inhibiting the WNK1/FOXO3a/MMP signaling pathway, demonstrating that LRRC8A is a potential therapeutic target for vascular remodeling-associated diseases such as stroke.

Construction of Magnesium Phosphate Chemical Conversion Coatings with Different Microstructures on Titanium to Enhance Osteogenesis and Angiogenesis.

Titanium (Ti) and its alloys are widely used as hard tissue substitutes in dentistry and orthopedics, but their low bioactivity leads to undesirable osseointegration defects in the early osteogenic phase. Surface modification is an important approach to overcome these problems. In the present study, novel magnesium phosphate (MgP) coatings with controllable structures were fabricated on the surface of Ti using the phosphate chemical conversion (PCC) method. The effects of the microstructure on the physicochemical and biological properties of the coatings on Ti were researched. The results indicated that accelerators in PCC solution were important factors affecting the microstructure and properties of the MgP coatings. In addition, the coated Ti exhibited excellent hydrophilicity, high bonding strength, and good corrosion resistance. Moreover, the biological results showed that the MgP coatings could improve the spread, proliferation, and osteogenic differentiation of mouse osteoblast cells (MC3T3-E1) and vascular differentiation of human umbilical vein endothelial cells (HUVECs), indicating that the coated Ti samples had a great effect on promoting osteogenesis and angiogenesis. Overall, this study provided a new research idea for the surface modification of conventional Ti to enhance osteogenesis and angiogenesis in different bone types for potential biomedical applications.

Atropisomeric Carboxylic Acids Synthesis via Nickel-Catalyzed Enantioconvergent Carboxylation of Aza-Biaryl Triflates with CO2.

Upgrading CO2 to value-added chiral molecules via catalytic asymmetric C-C bond formation is a highly important yet challenging task. Although great progress on the formation of centrally chiral carboxylic acids has been achieved, catalytic construction of axially chiral carboxylic acids with CO2 has never been reported to date. Herein, we report the first catalytic asymmetric synthesis of axially chiral carboxylic acids with CO2, which is enabled by nickel-catalyzed dynamic kinetic asymmetric reductive carboxylation of racemic aza-biaryl triflates. A variety of important axially chiral carboxylic acids, which are valuable but difficult to obtain via catalysis, are generated in an enantioconvergent version. This new methodology features good functional group tolerance, easy to scale-up, facile transformation and avoids cumbersome steps, handling organometallic reagents and using stoichiometric chiral materials. Mechanistic investigations indicate a dynamic kinetic asymmetric transformation process induced by chiral nickel catalysis.

High paternal homocysteine causes ventricular septal defects in mouse offspring.

Maternal hyperhomocysteinemia is widely considered as an independent risk of congenital heart disease (CHD). However, whether high paternal homocysteine causes CHD remains unknown. Here, we showed that increased homocysteine levels of male mice caused decreased sperm count, sperm motility defect and ventricular septal defect of the offspring. Moreover, high levels of paternal homocysteine decrease sperm DNMT3A/3B, accompanied with changes in DNA methylation levels in the promoter regions of CHD-related genes. Folic acid supplement could decrease the occurrence of VSD in high homocysteine male mice. This study reveals that increased paternal homocysteine level increases VSD risk in the offspring, indicating that decreasing paternal homocysteine may be an intervening target of CHD.

The Formation Process and Mechanism of the 3D Porous Network on the Sulfonated PEEK Surface.

A three-dimensional (3D) porous network can be prepared on the PEEK surface by sulfonation with enhanced osseointegration and antibacterial properties. However, few studies have been conducted on the formation mechanism of a 3D porous network. In this work, the surface and cross-sectional morphologies, chemical compositions, functional groups, surface wettability, and crystalline states of sulfonated PEEK were investigated at different sulfonation times and coagulant concentrations. The results show that the number of nodular structures and broken fibers on the sulfonated PEEK surface as well as the size of macrovoids in the cross sections increase with increasing sulfonation times when water is used as a coagulant. In contrast, dilute sulfuric acid as a coagulant can inhibit the formation of surface porous structures and macrovoids in the cross sections. Moreover, all of the sulfonated PEEK samples have the same chemical compositions but exhibit better hydrophilicity as the number of microsized pores decreases. It is proposed that non-solvent-induced phase separation (NIPS) occurs during the sulfonation process, and the formation mechanism of surface and cross-sectional morphologies is discussed. Furthermore, it is assumed that the air is trapped in the microsized pores, leaving the surface of the 3D porous network in the Cassie-wetting state. All of these preliminary results throw light on the nature of the sulfonation process and may guide further modification of the structures of sulfonated PEEK.

Cu-Catalyzed Asymmetric Dicarboxylation of 1,3-Dienes with CO2.

Dicarboxylic acids and derivatives are important building blocks in organic synthesis, biochemistry, and the polymer industry. Although catalytic dicarboxylation with CO2 represents a straightforward and sustainable route to dicarboxylic acids, it is still highly challenging and limited to generation of achiral or racemic dicarboxylic acids. To date, catalytic asymmetric dicarboxylation with CO2 to give chiral dicarboxylic acids has not been reported. Herein, we report the first asymmetric dicarboxylation of 1,3-dienes with CO2 via Cu catalysis. This strategy provides an efficient and environmentally benign route to chiral dicarboxylic acids with high regio-, chemo-, and enantioselectivities. The copper self-relay catalysis, that is, Cu-catalyzed boracarboxylation of 1,3-dienes to give carboxylated allyl boronic ester intermediates and subsequent carboxylation of C-B bonds to give dicarboxylates, is key to the success of this dicarboxylation. Moreover, this protocol exhibits broad substrate scope, good functional group tolerance, easy product derivatizations, and facile synthesis of chiral liquid crystalline polyester and drug-like scaffolds.

The Effect of Dezocine on the Median Effective Dose of Sufentanil-Induced Respiratory Depression in Patients Undergoing Spinal Anesthesia Combined with Low-Dose Dexmedetomidine.

Purpose: The application of sedation and analgesia in spinal anesthesia has many benefits, but the risk of respiratory depression (RD) caused by opioids cannot be ignored. We aimed to observe the effect of dezocine, a partial agonist of µ-receptor, on the median effective dose (ED50) of sufentanil-induced RD in patients undergoing spinal anesthesia combined with low-dose dexmedetomidine. Patients and Methods: Sixty-two patients were randomly assigned to dezocine group (DS) and control group (MS). After spinal anesthesia, mask oxygen (5 L/min) and dexmedetomidine (0.1 ug/kg) were given. Five minutes later, patients in the DS group received an Intravenous (IV) bolus of sufentanil and 0.05mg/kg dezocine, while patients in the MS group only received an IV bolus of sufentanil. Results: ED50 of DS group was 0.342 ug/kg, 95% confidence interval (CI) was (0.269, 0.623) ug/kg, and the ED50 of MS group was 0.291 ug/kg, 95% CI was (0.257, 0.346) ug/kg. There was no difference in the type and treatment measures of RD and hemodynamic changes between the two groups, and no serious adverse reactions occurred in either group. Conclusion: Dezocine can improve RD induced by sufentanil in patients with spinal anesthesia combined with low-dose dexmedetomidine, and increase the safety window of sufentanil use.

Analgesic Effects of Different Local Infiltration Anesthesia Techniques Combined with Femoral Nerve Block in Patients Undergoing Total Knee Arthroplasty: A Randomized Controlled Clinical Trial.

Objective: Pain after total knee arthroplasty (TKA) remains an unresolved problem. Femoral nerve block (FNB) could relieve pain; however, it alone is insufficient. The local infiltration anesthesia technique (LIA) has been suggested as a supplement to FNB. This study aimed to evaluate the analgesic effects of different LIA combined with FNB in TKA patients. Methods: The femoral nerve was blocked with 0.375% ropivacaine 20mL, and all patients routinely received general anesthesia. The primary indicator was the proportion of patients who did not receive post-operative remedial analgesia. Seventy-eight patients were randomly assigned to PAI (periarticular injection combined with FNB), IAI (intra-articular injection combined with FNB), or control (FNB alone) groups. All patients underwent FNB under general anesthesia. The primary outcome was the proportion of patients who did not receive additional postoperative analgesia within the first 48 h after surgery. Results: Compared with the PAI and control groups, the IAI group had a higher proportion (69.23%) of patients who did not receive remedial analgesia within 48 hours after surgery (P = 0.009; P = 0.009), a lower consumption of diclofenac sodium lidocaine (P = 0.021; P < 0.001), and an earlier time of walking with a walker (P < 0.001; P < 0.001). The time of first need for remedial analgesia postoperatively in IAI group was longer than the PAI group (P = 0.008) and IAI group has a shorter hospital stay than the control group (P = 0.008). The maximum NRS during the first 48 hours postoperatively and NRS 24 hours after surgery in the IAI group were lower than those in the control and PAI groups. The incidences of POD and PONV were similar among the three groups (P = 0.610; P = 0.264). Conclusion: When combined with FNB, intra-articular injection offers a superior analgesic effect and favorable recovery compared to periarticular injection and separate application of FNB.

On-board measurements of OC/EC ratio, mixing state, and light absorption of ship-emitted particles.

Carbonaceous aerosols play important roles in environmental impacts and climate effects. The characteristics of ship-emitted carbonaceous aerosols keep unclear under the latest global low sulfur fuel oil policy. This study selected four ocean-going vessels burning low sulfur fuel oils for on-board exhaust testing. The emission factors of ship carbonaceous aerosols were obtained under different engine types (main and auxiliary engines), fuel types, and engine loads. Our results showed that fuel and engine types were both important factors affecting carbonaceous aerosol emissions for ship engines. The emission factors of OC and EC from main engines were 1.18 ± 0.62 and 0.06 ± 0.04 g/kg burning heavy fuel oil (HFO), while 0.52 ± 0.35 and 0.04 ± 0.03 g/kg burning marine gas oil (MGO), respectively. The OC/EC ratios of ship-emitted particles were within a large range of 2 to 23. The OC/EC ratios from the main engines were significantly higher than those from the auxiliary engines by a factor of 6.3. The result of chemical mixing states of ship-emitted particles observed by a single particle mass spectrometer (SPAMS) showed that OC and EC were internally mixed and existed as the ECOC-bonded forms in single particles. The measured light absorption of ship-emitted particles with higher OC/EC ratios showed an evident short-wave absorption enhancement based on the aethalometer AE-33. Our results implied that ship-emitted carbonaceous aerosols (especially with high OC/EC ratios) could not be uniformly treated regarding the optical properties to more precisely estimate their potential environmental impacts and climate effects in model systems in the future.

Effect of Reaction Temperature on the Microstructure and Properties of Magnesium Phosphate Chemical Conversion Coatings on Titanium.

Magnesium phosphate (MgP) has garnered growing interest in hard tissue replacement processes due to having similar biological characteristics to calcium phosphate (CaP). In this study, an MgP coating with the newberyite (MgHPO4·3H2O) was prepared on the surface of pure titanium (Ti) using the phosphate chemical conversion (PCC) method. The influence of reaction temperature on the phase composition, microstructure, and properties of coatings was systematically researched with the use of an X-ray diffractometer (XRD), a scanning electron microscope (SEM), a laser scanning confocal microscope (LSCM), a contact angle goniometer, and a tensile testing machine. The formation mechanism of MgP coating on Ti was also explored. In addition, the corrosion resistance of the coatings on Ti was researched by assessing the electrochemical behavior in 0.9% NaCl solution using an electrochemical workstation. The results showed that temperature did not obviously affect the phase composition of the MgP coatings, but affected the growth and nucleation of newberyite crystals. In addition, an increase in reaction temperature had a great impact on properties including surface roughness, thickness, bonding strength, and corrosion resistance. Higher reaction temperatures resulted in more continuous MgP, larger grain size, higher density, and better corrosion resistance.

Pathological pathway analysis in an experimental rheumatoid arthritis model and the tissue repair effect of acupuncture at ST36.

Rheumatoid arthritis (RA) is an autoimmune disease that generally affects the joints. In the face of inflammation-induced cartilage and bone damage, RA treatment remains insufficient. While research evidence indicates that acupuncture can exert anti-inflammatory and analgesic effects, improve the joint function of RA patients, and delay the disease, data on whether it can promote RA repair are lacking. Findings from the present work demonstrated that both the antigen-induced arthritis (AIA) and collagen-induced arthritis (CIA) models can simulate joint swelling of RA. The AIA model was more stable than the CIA model, with a higher incidence of successful arthritis modeling. Moreover, the AIA mice model could simulate the signal molecules and related pathological processes of the autoimmune response in RA, as well as major pathways related to RA and antigen immune response mechanisms. Manual acupuncture (MA) at Zusanli (ST36) significantly improved paw redness and swelling, pain, and inflammatory cell infiltration in the joints in AIA mice. The therapeutic effect of MA on AIA is achieved primarily through the regulation of steroid hormone biosynthesis, cell metabolism, and tissue repair processes. MA at ST36 can increase the gene contents of tissue repair growth factors, including PEG3, GADD45A, GDF5, FGF5, SOX2, and ATP6V1C2 in the inflammatory side joints of AIA mice, as well as the gene expression of the anti-inflammatory cytokine IL-10. In conclusion, acupuncture may alleviate RA in the joints via modulating the tissue healing process.

Novel combined endoscopic and laparoscopic surgery for advanced T2 gastric cancer: Two case reports.

BACKGROUND: The standard treatment for advanced T2 gastric cancer (GC) is laparoscopic or surgical gastrectomy (either partial or total) and D2 lymphadenectomy. A novel combined endoscopic and laparoscopic surgery (NCELS) has recently been proposed as a better option for T2 GC. Here we describe two case studies demonstrating the efficacy and safety of NCELS. CASE SUMMARY: Two T2 GC cases were both resected by endoscopic submucosal dissection and full-thickness resection and laparoscopic lymph nodes dissection. This method has the advantage of being more precise and minimally invasive compared to current methods. The treatment of these 2 patients was safe and effective with no complications. These cases were followed up for nearly 4 years without recurrence or metastasis. CONCLUSION: This novel method provides a minimally invasive treatment option for T2 GC, and its potential indications, effectiveness and safety needs to be further evaluated in controlled studies.

Calcium-Zinc Phosphate Chemical Conversion Coating Facilitates the Osteointegration of Biodegradable Zinc Alloy Implants by Orchestrating Macrophage Phenotype.

Zinc (Zn) alloys provide a new generation for orthopedic applications due to their essential physiological effects and promising degradation properties. However, excessive release of Zn ions (Zn2+ ) during degradation and the severe inflammatory microenvironment are not conducive to osseointegration, which is determined by the characteristics of the implant surface. Therefore, it is essential to modulate the release rate of Zn alloys by surface modification technology and endow them with anti-inflammatory and osteogenic effects. In this study, two kinds of phosphate chemical conversion (PCC) coatings with different compositions and morphological structures are prepared, namely Zn-P (with disk-like crystals) and Ca-Zn-P (with lamellar crystals). Although all the PCC-coated Zn implants have low cytotoxicity, Ca-Zn-P show better osteoimmunomodulation effects in several aspects: the induction of the M2-phenotype macrophage polarization and thus promotion of osteogenesis in vitro; the regulation of the bone immune microenvironment which is conducive to tissue regeneration and osseointegration in vivo; and the release of ions (through PI3K/AKT and Wnt signaling pathways) and the morphological structures (through RhoGTPase signaling pathways) act as possible mechanisms of M2 polarization. The Ca-Zn-P coating can be considered to provide new insights into bone immunomodulation and osseointegration.

A NIR Fluorescent Probe Benzopyrylium Perchlorate-based for Visual Sensing and Imaging of SO2 Derivatives in Living Cells.

Endogenous sulfur dioxide (SO2), as a gas signal molecule, has a certain physiological functions. Understanding the role of endogenous SO2 in human physiology and pathology is of great significance to the biological characteristics of SO2,which bring challenges to develop fluorescent probes with excellent performance. Herein, we rationally designed and constructed a novel near-infrared bioprobe benzaldehyde-benzopyrylium (BBp) by employing the nucleophilic addition benzopyrylium perchlorate fluorophore and benzaldehyde moiety by means of C = C/C = O group that serves as both fluorescence reporting unit. Probe BBp exhibit excellent sensing performance with fluorescent "On - Off"rapid response (100 s) and long-wavelength emission (670 nm). With the treatment of HSO3-, the color of BBp solution obviously varies from purple to colorless, and the fluorescent color varies from red to colorless. By the fluorescence and colorimetric changes, probe BBp was capable of sensitive determination HSO3- with low limits of detection (LOD) of 0.43 µM, realizing visual quantitative monitoring SO2 derivative levels. Due to the low phototoxicity and good biocompatibility, it was successfully applied to monitor SO2 derivatives and fluorescence imaging in HepG2 and HeLa living cells. Hopefully, this work supplies a new strategy for designing NIR fluorescent probes for quantitative determination SO2 derivatives in biological samples.

Nicotinamide Mononucleotide Alleviates Cardiomyopathy Phenotypes Caused by Short-Chain Enoyl-Coa Hydratase 1 Deficiency.

Short-chain enoyl-CoA hydratase 1 (ECHS1) deficiency plays a role in cardiomyopathy. Whether ECHS1 deficiency causes or is only associated with cardiomyopathy remains unclear. By using Echs1 heterogeneous knockout (Echs1 +/-) mice, we found that ECHS1 deficiency caused cardiac dysfunction, as evidenced by diffuse myocardial fibrosis and upregulated fibrosis-related genes. Mechanistically, ECHS1 interacts with the p300 nuclear localization sequence, preventing its nuclear translocation in fibroblasts. ECHS1 deficiency promotes p300 nuclear translocation, leading to increased H3K9 acetylation, a known risk factor for cardiomyopathy. Nicotinamide mononucleotide-mediated acetylation targeting suppressed ECHS1 deficiency-induced cardiomyopathy phenotypes in Echs1 +/- mice. Thus, enhancing p300-mediated H3K9ac is a potential interventional approach for preventing ECHS1 deficiency-induced cardiomyopathy.