Copolymerization of ß-Butyrolactones into Functionalized Polyhydroxyalkanoates Using Aluminum Catalysts: Influence of the Initiator in the Ring-Opening Polymerization Mechanism.

Within bioplastics, natural poly(3-hydroxybutyrate) (PHB) stands out as fully biocompatible and biodegradable, even in marine environments; however, its high isotacticity and crystallinity limits its mechanical properties and hence its applications. PHB can also be synthesized with different tacticities via a catalytic ring-opening polymerization (ROP) of rac-ß-butyrolactone (BBL), paving the way to PHB with better thermomechanical and processability properties. In this work, the catalyst family is extended based on aluminum phenoxy-imine methyl catalyst [AlMeL2], that reveals efficient in the ROP of BBL, to the halogeno analogous complex [AlClL2]. As well, the impact on the ROP mechanism of different initiators is further explored with a particular focus in dimethylaminopyridine (DMAP), a hardly studied initiator for the ROP of BBL. A thorough mechanistic study is performed that evidences the presence of two concomitant DMAP-mediated mechanisms, that lead to either a DMAP or a crotonate end-capping group. Besides, in order to increase the possibilities of PHB post-polymerization functionalization, the introduction of a side-chain functionality is explored, establishing the copolymerization of BBL with ß-allyloxymethylene propiolactone (BPLOAll), resulting in well-defined P(BBL-co-BPLOAll) copolymers.

Chemistry that allows plastic recycling.

Enhancing thermal stability of polyhydroxyalkanoates for their closed-loop chemistry.

Precise control of water stress in the field reveals different response thresholds for forage yield and digestibility of maize hybrids.

Introduction: With dwindling global freshwater supplies and increasing water stress, agriculture is coming under increasing pressure to reduce water use. Plant breeding requires high analytical capabilities. For this reason, near-infrared spectroscopy (NIRS) has been used to develop prediction equations for whole-plant samples, particularly for predicting dry matter digestibility, which has a major impact on the energy value of forage maize hybrids and is required for inclusion in the official French catalogue. Although the historical NIRS equations have long been used routinely in seed company breeding programmes, they do not predict all variables with the same accuracy. In addition, little is known about how accurate their predictions are under different water stress-environments. Methods: Here, we examined the effects of water stress and stress intensity on agronomic, biochemical, and NIRS predictive values in a set of 13 modern S0-S1 forage maize hybrids under four different environmental conditions resulting from the combination of a northern and southern location and two monitored water stress levels in the south. Results: First, we compared the reliability of NIRS predictions for basic forage quality traits obtained using the historical NIRS predictive equations and the new equations we recently developed. We found that NIRS predicted values were affected to varying degrees by environmental conditions. We also showed that forage yield gradually decreased as a function of water stress, whereas both dry matter and cell wall digestibilities increased regardless of the intensity of water stress, with variability among the tested varieties decreasing under the most stressed conditions. Discussion: By combining forage yield and dry matter digestibility, we were able to quantify digestible yield and identify varieties with different strategies for coping with water stress, raising the exciting possibility that important potential selection targets still exist. Finally, from a farmer's perspective, we were able to show that late silage harvest has no effect on dry matter digestibility and that moderate water stress does not necessarily result in a loss of digestible yield.

Polythioesters Prepared by Ring-Opening Polymerization of Cyclic Thioesters and Related Monomers.

Polyhydroxyalkanoates (PHAs) are biodegradable and biocompatible polyesters with a wide range of applications; in particular, they currently stand as promising alternatives to conventional polyolefin-based "plastics". The introduction of sulfur atoms within the PHAs backbone can endow the resulting polythioesters (PTEs) with differentiated, sometimes enhanced thermal, optical and mechanical properties, thereby widening their versatility and use. Hence, PTEs have been gaining increasing attention over the past half-decade. This review highlights recent advances towards the synthesis of well-defined PTEs by ring-opening polymerization (ROP) of cyclic thioesters - namely thiolactones - as well as of S-carboxyanhydrides and thionolactones; it also covers the ring-opening copolymerization (ROCOP) of cyclic thioanhydrides or thiolactones with epoxides or episulfides. Most of the ROP reactions described are of anionic type, mediated by inorganic, organic or organometallic initiators/catalysts, along with a few enzymatic reactions as well. Emphasis is placed on the reactivity of the thio monomers, in relation to their ring-size ranging from 4- to 5-, 6- and 7-membered cycles, the nature of the catalyst/initiating systems implemented and their efficiency in terms of activity and control over the PTE molar mass, dispersity, topology, and microstructure.

Tacticity Control of Cyclic Poly(3-Thiobutyrate) Prepared by Ring-Opening Polymerization of Racemic ß-Thiobutyrolactone.

We report here on the ring-opening polymerization (ROP) of racemic ß-thiobutyrolactone (rac-TBL), as the first chemical synthesis of poly(3-thiobutyrolactone) (P3TB), the thioester analogue of the ubiquitous poly(3-hydroxybutyrate) (P3HB). The ROP reactions proceed very fast (TOF >12 000 h-1 at r.t.) in the presence of various metal-based catalysts. Remarkably, catalyst systems based on non-chiral yttrium complexes stabilized by tetradentate amino alkoxy- or diamino-bis(phenolate) ligands {ONXOR1,R2 }2- (X=O, N) provide access to cyclic P3TB with either high isoselectivity (Pm up to 0.90) or high syndiotactic bias (Pr up to 0.70). The stereoselectivity can be controlled by manipulation of the substituents on the ligand platform and adequate choice of the reaction solvent and temperature as well. The cyclic polymer topology is evidenced by MALDI-ToF MS, NMR and TGA. Highly isotactic cyclic P3TB is a semi-crystalline material as revealed by DSC.

Normal delivery: physiologic support and medical interventions. Guidelines of the French National Authority for Health (HAS) with the collaboration of the French College of Gynecologists and Obstetricians (CNGOF) and the French College of Midwives (CNSF).

OBJECTIVE: To define for women at low obstetric risk methods of management that respect the rhythm and the spontaneous course of giving birth as well as each woman's preferences. METHODS: These clinical practice guidelines were developed through professional consensus based on an analysis of the literature and of the French and international guidelines available on this topic. RESULTS: Labor should be monitored with a partograph (professional consensus). Digital cervical examination should be offered every 4 h during the first stage of labor, hourly during the second. The choice between continuous (cardiotocography) or discontinuous (by cardiotocography or intermittent auscultation) monitoring should be left to the woman (professional consensus). In the active phase of the first stage of labor, dilation speed is considered abnormal if it is less than 1 cm/4 h between 5 and 7 cm or less than 1 cm/2 h after 7 cm. In those cases, an amniotomy is recommended if the membranes are intact, and the administration of oxytocin if the membranes are already broken and uterine contractions are judged insufficient (professional consensus). It is recommended that pushing not begin when full dilation has been reached; rather, the fetus should be allowed to descend (grade A). Umbilical cord clamping should be delayed beyond the first 30 s in newborns who do not require resuscitation (grade C). CONCLUSION: The establishment of these clinical practice guidelines should enable women at low obstetric risk to receive better care in conditions of optimal safety while supporting physiologic birth.

Follow-up for pregnant women during the COVID-19 pandemic: French national authority for health recommendations.

INTRODUCTION: In the context of the stage 3 SARS-Cov-2 epidemic situation, it is necessary to put forward a method of rapid response for an HAS position statement in order to answer to the requests from the French Ministry of Solidarity and Health, healthcare professionals and/or health system users' associations concerning follow-up of pregnant women during the COVID-19 outbreak. METHODS: A simplified 7-step process that favours HAS collaboration with experts (healthcare professionals, health system users' associations, scientific societies etc.), the restrictive selection of available evidence and the use of digital means of communication. A short and specific dissemination format, which can be quickly updated in view of the changes in available data has been chosen.

Post-natal follow-up for women and neonates during the COVID-19 pandemic: French National Authority for Health recommendations.

INTRODUCTION: In the context of the stage 3 SARS-Cov-2 epidemic situation, it is necessary to put forward a method of rapid response for an HAS position statement in order to answer to the requests from the French Ministry of Solidarity and Health, healthcare professionals and/or health system users' associations, concerning post-natal follow-up for women and neonates during the COVID-19 pandemic. METHODS: A simplified 7-step process that favours HAS collaboration with experts (healthcare professionals, health system users' associations, scientific societies etc.), the restrictive selection of available evidence and the use of digital means of communication. A short and specific dissemination format, which can be quickly updated in view of the changes in available data has been chosen.

Recent Advances in Metal-Mediated Stereoselective Ring-Opening Polymerization of Functional Cyclic Esters towards Well-Defined Poly(hydroxy acid)s: From Stereoselectivity to Sequence-Control.

Poly(hydroxy acid)s are a family of biocompatible and (bio)degradable polyesters with various outcomes in different domains of application. To date, poly(hydroxy acid)s are best prepared by ring-opening polymerization (ROP) of the corresponding cyclic esters. Using racemic chiral monomers featuring side-chain groups enables to access, providing a stereoselective catalyst/initiator system is implemented, stereoregular functional polymers, thereby improving their physico-chemical properties, and ultimately, widening their range of uses. Here, we highlight a few important advances in metal-mediated stereoselective ROP of cyclic esters towards the synthesis of (functional) stereoregular poly(hydroxy acid)s that have recently been disclosed, emphasizing on (functional) ß- and γ-lactones, diolide and O-carboxyanhydride (OCA) monomers and yttrium-based catalysis. Fine-tuning of the substituents flanked on the catalyst ligand enables reaching poly(hydroxy acid)s with syndiotactic and also isotactic microstructures. The stereocontrol mechanisms at work and their probable origin, relying on steric but also electronic factors imparted in particular by the ligand substituents, are discussed. Taking advantage of such stereoselective ROPs, original copoly(hydroxy acid)s with gradient or alternated patterns then become accessible from the use of mixtures of chemically different, oppositely configured enantiopure monomers.

Yttrium-Mediated Ring-Opening Copolymerization of Oppositely Configurated 4-Alkoxymethylene-ß-Propiolactones: Effective Access to Highly Alternated Isotactic Functional PHAs.

The ring-opening copolymerization (ROCOP) of functional 4-alkoxymethylene-ß-propiolactones (BPLOR s) by yttrium-bisphenolate complexes was investigated. The ROCOP of equimolar mixtures of BPLOR s of opposite configurations, namely (R)-BPLOR1 /(S)-BPLOR2 [R1 , R2 =OMe, OAllyl, OCH2 Ph (=OBn), OSiMe2 tBu (=OTBDMS)], by the syndioselective Y{ONOOcum }/iPrOH catalyst/initiator system affords P(HBOR1 -alt-HBOR2 ) copolymers with high alternation degrees (altern.=89-94 %), as determined by comprehensive kinetic, 13 C{1 H} NMR spectroscopy, MALDI-ToF MS and ESI MS/MS fragmentation studies. The ROCOP of the (R)-BPLOMe /(S)-BPLOTBDMS combination, featuring a large difference in the substituents' bulkiness, constitutes the only observed exception to this trend (altern.=64 %). On the other hand, the isoselectivity of the Y{ONNOCl }/iPrOH catalyst/initiator system has been exploited to generate, in a one-pot/one-step procedure, original mixtures of isotactic poly(hydroxyalkanoate)s (PHAs). This system efficiently transforms equimolar mixtures of (R)-BPLOAll /(S)-BPLOMe into a 1:1 mixture of the corresponding isotactic iso-(R)-PHBOAll and iso-(S)-PHBOMe homopolymers; almost no copolymerization defects are observed. This new approach has been extended successfully to the ROCOP of equimolar mixtures of racemic monomers, rac-BPLOAll /rac-BPLOMe .

Steric vs. electronic stereocontrol in syndio- or iso-selective ROP of functional chiral ß-lactones mediated by achiral yttrium-bisphenolate complexes.

Origins of stereoselectivity in ROP of racemic chiral cyclic esters promoted by achiral yttrium complexes, resulting in the formation of highly heterotactic polylactide, and highly syndiotactic or, more uniquely, highly isotactic poly(3-hydroxybutyrate)s, are discussed. A close interplay between the nature of the cyclic ester, most particularly of the exocyclic functional chain installed on the chiral center of ß-lactones, and the ortho-substituents installed on the phenolate rings of the ligand, results in various determining secondary interactions of steric and also electronic nature.

α,ω-Epoxide, Oxetane, and Dithiocarbonate Telechelic Copolyolefins: Access by Ring-Opening Metathesis/Cross-Metathesis Polymerization (ROMP/CM) of Cycloolefins in the Presence of Functional Symmetric Chain-Transfer Agents.

Epoxide- and oxetane-α,ω-telechelic (co)polyolefins have been successfully synthesized by the tandem ring-opening metathesis polymerization (ROMP)/cross-metathesis (CM) of cyclic olefins using Grubbs' second-generation catalyst (G2) in the presence of a bifunctional symmetric alkene epoxide- or oxetane-functionalized chain-transfer agent (CTA). From cyclooctene (COE), trans,trans,cis-1,5,9-cyclododecatriene (CDT), norbornene (NB), and methyl 5-norbornene-2-carboxylate (NBCOOMe), with bis(oxiran-2-ylmethyl) maleate (CTA 1), bis(oxetane-2-ylmethyl) maleate (CTA 2), or bis(oxetane-2-ylmethyl) (E)-hex-3-enedioate (CTA 3), well-defined α,ω-di(epoxide or oxetane) telechelic PCOEs, P(COE-co-NB or -NBCOOMe)s, and P(NB-co-CDT)s were isolated under mild operating conditions (40 or 60 °C, 24 h). The oxetane CTA 3 and the epoxide CTA 1 were revealed to be significantly more efficient in the CM step than CTA 2, which apparently inhibits the reaction. Quantitative dithiocarbonatation (CS2/LiBr, 40 °C, THF) of an α,ω-di(epoxide) telechelic P(NB-co-CDT) afforded a convenient approach to the analogous α,ω-bis(dithiocarbonate) telechelic P(NB-co-CDT). The nature of the end-capping function of the epoxide/oxetane/dithiocarbonate telechelic P(NB-co-CDT)s did not impact their thermal signature, as measured by DSC. These copolymers also displayed a low viscosity liquid-like behavior and a shear thinning rheological behavior.

Evaluation of Band-Selective HSQC and HMBC: Methodological Validation on the Cyclosporin Cyclic Peptide and Application for Poly(3-hydroxyalkanoate)s Stereoregularity Determination.

Band-selective (bs) HSQC, improving spectral resolution by restriction of the heteronuclear dimension without inducing spectral folding, has been recently used for polymer tacticity determination. Herein is reported an evaluation of various bs-HSQC and bs-HMBC sequences, first from a methodological point of view (selectivity, dependence to INEPT interpulse delay or relaxation delay), using the cyclic peptide cyclosporin selected as a model compound, and then from an applicative approach, comparing tacticity determined from bs-HSQC and bs-HMBC experiments to the one obtained from 1D 13C{¹H} on poly(3-hydroxyalkanoate)s samples. For HSQC sequences, the 13C selectivity scheme consisting in substituting a 13C broadband refocalization by a selective one revealed itself problematic, with unwanted aliased signals, whereas the insertion of double pulsed field gradients spin-echo (DPFGSE) or the use of opposite sign gradients bracketing a selective refocalization gave satisfactory results. Determination of the probability of syndiotactic enchainments, Ps, by bs-HSQC is fully consistent and no precision loss was observed when decreasing acquisition time (37 min vs. 106 min for 1D 13C{¹H}). Bs-HMBC, although not straightforwardly applicable for tacticity determination, could provide (after a calibration step) an alternative for compounds of which only 13C carbonyl signals are resolved enough for discriminating between syndiotactic and isotactic configurations.

Highly Syndiotactic or Isotactic Polyhydroxyalkanoates by Ligand-Controlled Yttrium-Catalyzed Stereoselective Ring-Opening Polymerization of Functional Racemic ß-Lactones.

Reported herein is the first stereoselective controlled ROP of a specific family of racemic functional ß-lactones, namely 4-alkoxymethylene-ß-propiolactones (BPLOR s). This process is catalyzed by an yttrium complex stabilized by a nonchiral tetradentate amino alkoxy bisphenolate ligand {ONOOR'2 }2- , which features both a good activity and a high degree of control over the molar masses of the resulting functional poly(3-hydroxyalkanoate)s. A simple modification of the R' substituents in ortho and para position on the ligand platform allows for a complete reversal from virtually pure syndioselectivity (Ps up to 0.91 with R'=cumyl) to very high isoselectivity (Pi up to 0.93 with R'=Cl), as supported by DFT insights. This is the first example of a highly isoselective ROP of a racemic chiral ß-lactone.

Opsonisation of nanoparticles prepared from poly(ß-hydroxybutyrate) and poly(trimethylene carbonate)-b-poly(malic acid) amphiphilic diblock copolymers: Impact on the in vitro cell uptake by primary human macrophages and HepaRG hepatoma cells.

The present work reports the investigation of the biocompatibility, opsonisation and cell uptake by human primary macrophages and HepaRG cells of nanoparticles (NPs) formulated from poly(ß-malic acid)-b-poly(ß-hydroxybutyrate) (PMLA-b-PHB) and poly(ß-malic acid)-b-poly(trimethylene carbonate) (PMLA-b-PTMC) diblock copolymers, namely PMLA800-b-PHB7300, PMLA4500-b-PHB4400, PMLA2500-b-PTMC2800 and PMLA4300-b-PTMC1400. NPs derived from PMLA-b-PHB and PMLA-b-PTMC do not trigger lactate dehydrogenase release and do not activate the secretion of pro-inflammatory cytokines demonstrating the excellent biocompatibility of these copolymers derived nano-objects. Using a protein adsorption assay, we demonstrate that the binding of plasma proteins is very low for PMLA-b-PHB-based nano-objects, and higher for those prepared from PMLA-b-PTMC copolymers. Moreover, a more efficient uptake by macrophages and HepaRG cells is observed for NPs formulated from PMLA-b-PHB copolymers compared to that of PMLA-b-PTMC-based NPs. Interestingly, the uptake in HepaRG cells of NPs formulated from PMLA800-b-PHB7300 is much higher than that of NPs based on PMLA4500-b-PHB4400. In addition, the cell internalization of PMLA800-b-PHB7300 based-NPs, probably through endocytosis, is strongly increased by serum pre-coating in HepaRG cells but not in macrophages. Together, these data strongly suggest that the binding of a specific subset of plasmatic proteins onto the PMLA800-b-PHB7300-based NPs favors the HepaRG cell uptake while reducing that of macrophages.

New Linear and Star-Shaped Thermogelling Poly([R]-3-hydroxybutyrate) Copolymers.

The synthesis of multi-arm poly([R]-3-hydroxybutyrate) (PHB)-based triblock copolymers (poly([R]-3-hydroxybutyrate)-b-poly(N-isopropylacrylamide)-b-[[poly(methyl ether methacrylate)-g-poly(ethylene glycol)]-co-[poly(methacrylate)-g-poly(propylene glycol)]], PHB-b-PNIPAAM-b-(PPEGMEMA-co-PPPGMA), and their subsequent self-assembly into thermo-responsive hydrogels is described. Atom transfer radical polymerization (ATRP) of N-isopropylacrylamide (NIPAAM) followed by poly(ethylene glycol) methyl ether methacrylate (PEGMEMA) and poly(propylene glycol) methacrylate (PPGMA) was achieved from bromoesterified multi-arm PHB macroinitiators. The composition of the resulting copolymers was investigated by (1) H and (13) C J-MOD NMR spectroscopy as well as size-exclusion chromatography (SEC), thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC). The copolymers featuring different architectures and distinct hydrophilic/hydrophobic contents were found to self-assemble into thermo-responsive gels in aqueous solution. Rheological studies indicated that the linear one-arm PHB-based copolymer tend to form a micellar solution, whereas the two- and four-arm PHB-based copolymers afforded gels with enhanced mechanical properties and solid-like behavior. These investigations are the first to correlate the gelation properties to the arm number of a PHB-based copolymer. All copolymers revealed a double thermo-responsive behavior due to the NIPAAM and PPGMA blocks, thus allowing first the copolymer self-assembly at room temperature, and then the delivery of a drug at body temperature (37 °C). The non-significant toxic response of the gels, as assessed by the cell viability of the CCD-112CoN human fibroblast cell line with different concentrations of the triblock copolymers ranging from 0.03 to 1 mg mL(-1) , suggest that these PHB-based thermo-responsive gels are promising candidate biomaterials for drug-delivery applications.

Highly Stereocontrolled Ring-Opening Polymerization of Racemic Alkyl ß-Malolactonates Mediated by Yttrium [Amino-alkoxy-bis(phenolate)] Complexes.

Yttrium [amino-alkoxy-bis(phenolate)]amido complexes have been used for the ring-opening polymerization (ROP) of racemic alkyl ß-malolactonates (4-alkoxycarbonyl-2-oxetanones, rac-MLA(R) s) bearing an allyl (All), benzyl (Bz) or methyl (Me) lateral ester function. The nature of the ortho-substituent on the phenolate rings in the metal ancillary dictated the stereocontrol of the ROP, and consequently the syndiotactic enrichment of the resulting polyesters. ROP promoted by catalysts with halogen (Cl, Br)-disubstituted ligands allowed the first reported synthesis of highly syndiotactic PMLA(R) s (Pr ≥ 0.95); conversely, catalysts bearing bulky alkyl and aryl ortho-substituted ligands proved largely ineffective. All polymers have been characterized by (1) H and (13) C{(1) H} NMR spectroscopy, MALDI-ToF mass spectrometry and DSC analyses. Statistical and thermal analyses enabled the rationalization of the chain-end control mechanism. Whereas the stereocontrol of the polymerization obeyed a Markov first-order (Mk1) model for the ROP of rac-MLA(Bz) and rac-MLA(All) , the ROP of rac-MLA(Me) led to a chain end-control of Markov second-order type (Mk2). DFT computations suggest that the high stereocontrol ability featured by catalysts bearing Cl- and Br-substituted ligands does not likely originate from halogen bonding between the halogen substituent and the growing polyester chain.

Poly(trimethylene carbonate)/Poly(malic acid) Amphiphilic Diblock Copolymers as Biocompatible Nanoparticles.

Amphiphilic polycarbonate-poly(hydroxyalkanoate) diblock copolymers, namely, poly(trimethylene carbonate) (PTMC)-b-poly(ß-malic acid) (PMLA), are reported for the first time. The synthetic strategy relies on commercially available catalysts and initiator. The controlled ring-opening polymerization (ROP) of trimethylene carbonate (TMC) catalyzed by the organic guanidine base 1,5,7-triazabicyclo[4.4.0]dec-5-ene (TBD), associated with iPrOH as an initiator, provided iPrO-PTMC-OH, which served as a macroinitiator in the controlled ROP of benzyl ß-malolactonate (MLABe) catalyzed by the neodymium triflate salt (Nd(OTf)3). The resulting hydrophobic iPrO-PTMC-b-PMLABe-OH copolymers were then hydrogenolyzed into the parent iPrO-PTMC-b-PMLA-OH copolymers. A range of well-defined copolymers, featuring different sizes of segments (Mn,NMR up to 9300 g mol(-1) ; ÐM =1.28-1.40), were thus isolated in gram quantities, as evidenced by NMR spectroscopy, size exclusion chromatography, thermogravimetric analysis, differential scanning calorimetry, and contact angle analyses. Subsequently, PTMC-b-PMLA copolymers with different hydrophilic weight fractions (11-75 %) self-assembled in phosphate-buffered saline upon nanoprecipitation into well-defined nano-objects with Dh =61-176 nm, a polydispersity index <0.25, and a negative surface charge, as characterized by dynamic light scattering and zeta-potential analyses. In addition, these nanoparticles demonstrated no significant effect on cell viability at low concentrations, and a very low cytotoxicity at high concentrations only for PTMC-b-PMLA copolymers exhibiting hydrophilic fractions over 47 %, thus illustrating the potential of these copolymers as promising nanoparticles.