Active site of chondroitin AC lyase revealed by the structure of enzyme-oligosaccharide complexes and mutagenesis.

The crystal structures of Flavobacterium heparinium chondroitin AC lyase (chondroitinase AC; EC 4.2.2.5) bound to dermatan sulfate hexasaccharide (DS(hexa)), tetrasaccharide (DS(tetra)), and hyaluronic acid tetrasaccharide (HA(tetra)) have been refined at 2.0, 2.0, and 2.1 A resolution, respectively. The structure of the Tyr234Phe mutant of AC lyase bound to a chondroitin sulfate tetrasaccharide (CS(tetra)) has also been determined to 2.3 A resolution. For each of these complexes, four (DS(hexa) and CS(tetra)) or two (DS(tetra) and HA(tetra)) ordered sugars are visible in electron density maps. The lyase AC DS(hexa) and CS(tetra) complexes reveal binding at four subsites, -2, -1, +1, and +2, within a narrow and shallow protein channel. We suggest that subsites -2 and -1 together represent the substrate recognition area, +1 is the catalytic subsite and +1 and +2 together represent the product release area. The putative catalytic site is located between the substrate recognition area and the product release area, carrying out catalysis at the +1 subsite. Four residues near the catalytic site, His225, Tyr234, Arg288, and Glu371 together form a catalytic tetrad. The mutations His225Ala, Tyr234Phe, Arg288Ala, and Arg292Ala, revealed residual activity for only the Arg292Ala mutant. Structural data indicate that Arg292 is primarily involved in recognition of the N-acetyl and sulfate moieties of galactosamine, but does not participate directly in catalysis. Candidates for the general base, removing the proton attached to C-5 of the glucuronic acid at the +1 subsite, are Tyr234, which could be transiently deprotonated during catalysis, or His225. Tyrosine 234 is a candidate to protonate the leaving group. Arginine 288 likely contributes to charge neutralization and stabilization of the enolate anion intermediate during catalysis.

Preparation and structural determination of dermatan sulfate-derived oligosaccharides.

Eight oligosaccharides were prepared from dermatan sulfate (DS) and their structures were elucidated. Porcine intestinal mucosal DS was subjected to controlled depolymerization using chondroitin ABC lyase (chondroitinase ABC). The oligosaccharide mixture formed was fractionated by low-pressure gel permeation chromatography (GPC). Size uniform mixtures of disaccharides, tetrasaccharides, hexasaccharides, octasaccharides, decasaccharides, and dodecasaccharides were obtained. Each size-fractionated mixture was then purified on the basis of charge by repetitive semi-preparative strong-anion-exchange (SAX) high-performance liquid chromatography (HPLC). This approach has led to the isolation of six homogeneous oligosaccharides. The size of the oligosaccharides were determined using GPC-HPLC. Treatment of tetrasaccharide and hexasaccharide fragments with Hg(OAc)2 afforded trisaccharide and pentasaccharide products, respectively. The purity of the oligosaccharides obtained was confirmed by analytical SAX-HPLC, and capillary electrophoresis (CE). The molecular mass and degree of sulfation of the eight purified oligosaccharides were elucidated using electrospray ionization (ESI) mass spectrometry and their structures were established with high field nuclear magnetic resonance (NMR) spectroscopy. These DS-oligosaccharides are currently being used to study for interaction of the DS with biologically important proteins.

Heparinase I acts on a synthetic heparin pentasaccharide corresponding to the antithrombin III binding site.

A synthetic pentasaccharide, containing an intact antithrombin III (ATIII) binding site that is in clinical studies a specific antifactor Xa agent, serves as a substrate for a heparin lyase (heparinase I, EC 4.2.2.7) from Flavobacterium heparinum. Heparinase I, currently being assessed as a heparin reversal agent, also reverses the antifactor Xa activity of this synthetic pentasaccharide by breaking it down to inactive disaccharide and trisaccharide products.

Preparation and isolation of neoglycoconjugates using biotin-streptavidin complexes.

Glycoproteins commercially available in multi-gram quantities, were used to prepare milligram amounts of neoglycoproteins. The glycoproteins bromelain and bovine gamma-globulin were proteolyzed to obtain glycopeptides or converted to a mixture of glycans through hydrazinolysis. The glycan mixture was structurally simplified by carbohydrate remodeling using exoglycosidases. Glycopeptides were biotinylated using N-hydroxysuccinimide activated-long chain biotin while glycoprotein-derived glycans were first reductively aminated with ammonium bicarbonate and then biotinylated. The resulting biotinylated carbohydrates were structurally characterized and then bound to streptavidin to afford neoglycoproteins. The peptidoglycan component of raw, unbleached heparin (an intermediate in the manufacture of heparin) was similarly biotinylated and bound to streptavidin to obtain milligram amounts of a heparin neoproteoglycan. The neoglycoconjugates prepared contain well defined glycan chains at specific locations on the streptavidin core and should be useful for the study of protein-carbohydrate interactions and affinity separations.

Purification and characterization of heparan sulphate proteoglycan from bovine brain.

A heparan sulphate proteoglycan was purified from adult bovine brain tissues and its structure was characterized. The major heparan sulphate proteoglycan from whole bovine brain had a molecular mass of >200 kDa on denaturing SDS/PAGE and a core protein size of 66 kDa following the removal of glycosaminoglycan chains. Fractionation on DEAE-Sephacel showed that this proteoglycan consisted of three major forms having high, intermediate and low overall charge. All core proteins were identical in size and reacted with heparan sulphate proteoglycan-stub antibody and an antibody made to a synthetic peptide based on rat glypican. The three forms of proteoglycans had identical peptide maps and their amino acid compositional analysis did not match any of the known glypicans. The internal sequence of a major peptide showed only 37.5% sequence similarity with human glypican 5. The glycosaminoglycan chain sizes of the three forms of this proteoglycan, determined after beta-elimination by PAGE, were identical. The disaccharide compositional analysis on the heparan sulphate chains from the three forms of the proteoglycan, determined by treatment with a mixture of heparin lyases followed by high-resolution capillary electrophoresis, showed that they differed primarily by degree of sulphation. The most highly sulphated proteoglycan isolated had a disaccharide composition similar to heparan sulphate glycosaminoglycans found in brain tissue. Based on their sensitivity to low pH nitrous acid treatment, the N-sulphate groups in these proteoglycans were found to be primarily in the smaller glycosaminoglycan chains. The heparan sulphate proteoglycans were also heavily glycosylated with O-linked glycans and no glycosylphosphatidylinositol anchor could be detected.

Synthesis and hypnotic activity of new 4-thiazolidinone and 2-thioxo-4,5-imidazolidinedione derivatives.

Conveniently accessible 4-[(2-(3,4-dimethoxyphenyl)ethyl]-3-thiosemicarbazide (2) was converted to new 1-substituted benzylidene/furfurylidene-4- [2-(3,4-dimethoxyphenyl)ethyl]-3-thiosemicarbazides (3) which furnished 2-(substituted benzylidene/furfurylidene) hydrazono-3-[2-(3,4-dimethoxyphenyl)ethyl]thiazolidin-4-ones (4) and 1-(substituted benzylidene/furfurylidene)-amino -3-[2-(3,4-dimethoxyphenyl)ethyl]-2-thioxo-4,5-imidazolidinedio nes (5) on reaction with chloroacetic acid and oxalyl chloride, respectively. The structure of 5 was confirmed by X-ray diffraction studies performed on 5a. 4 and 5 were evaluated for their potentiating effects on pentobarbital induced hypnosis. Most of the compounds caused remarkable increases in pentobarbital sleeping time.

Production and chemical processing of low molecular weight heparins.

Heparin is an animal tissue extract that is widely used as an anticoagulant drug. A number of low molecular weight heparins (LMWHs), introduced in the past decade, are beginning to displace pharmaceutical (or compendial) grade heparins as clinical antithrombotic agents. This article describes the chemical properties of the glycosaminoglycan (GAG) heparin and how it is prepared and processed into pharmaceutical grade heparin. There are several commercially produced LMWHs that are prepared through the controlled depolymerization of pharmaceutical grade heparin. The chemistry of the commercial processes used for manufacturing LMWHs is discussed. Structural differences are found in the LMWHs prepared using different commercial processes. Careful control of process variables has generally resulted in the reproducible preparation of LMWHs that are structurally uniform and of high quality. The specifications, however, remain different for each LMWH. Thus, LMWHs are a group of similar but different drug agents. As the structural properties of LMWHs vary significantly, the bio-equivalence or inequivalence of these agents must ultimately be established by the pharmacologists and the clinicians.

Heparinoids: structure, biological activities and therapeutic applications.

Heparin is an important polyanionic drug having a wide variety of different biological activities. Substantial research effort has focused on the preparation of improved heparins and heparin analogues that might exhibit higher specificity and decreased side effects. These heparin analogues or heparinoids include sulfated polysaccharides from plant and animal origin, synthetic derivatives of polysaccharides, and acidic oligosaccharides and their small synthetic analogues. The structure, biological activities and therapeutic potential of these heparinoids are discussed.

5-Nitroimidazole derivatives as possible antibacterial and antifungal agents.

Some novel 1-[2-[[5-(2-furanyl)-4-substituted 4H-1,2,4-triazol-3-yl[thio[ethyl[-2-methyl-5-nitro-1H-imidazoles (3), 1-[3-[[5-(2-furanyl/2-thienyl)-4-substituted 4H-1,2,4-triazol-3-yl[-thio]-2-hydroxypropyl[-2-methyl-5-nitro-1H- imidazoles (5) and 1-[3-[(N,N-disubstituted thiocarbamoyl)-thio[-2-hydroxypropyl]-2-methyl-5-nitro-1H-imidazoles (7) were synthesized and evaluated for in vitro antibacterial and antifungal activity. Some of 5 were found to be effective against bacteria and fungi (minimum inhibitory concentration (MIC) 7.3-125 micrograms/ml), whereas 7 were found to be effective against fungi (MIC 3-25 micrograms/ml).