RESUMO
The design of multimetal catalysts holds immense significance for efficient CO2 capture and its conversion into economically valuable chemicals. Herein, heterobimetallic catalysts (MiMo)L were exploited for the CO2 reduction reactions (CO2RR) using relativistic density functional theory (DFT). The octadentate Pacman-like polypyrrolic ligand (H4L) accommodates two metal ions (Mo, W, Nd, and U) inside (Mi) and outside (Mo) its month, rendering a weak bimetal coupling-assisted MN4 catalytically active site. Adsorption reactions have access to energetically stable coordination modes of -OCO, -OOC, and -(OCO)2, where the donor atom(s) are marked in bold. Among all of the species, (UiMoo)L releases the most energy. Along CO2RR, it favors to produce CO. The high-efficiency CO2 reduction is attributed to the size matching of U with the ligand mouth and the effective manipulation of the electron density of both ligand and bimetals. The mechanism in which heterobimetals synergetically capture and reduce CO2 has been postulated. This establishes a reference in elaborating on the complicated heterogeneous catalysis.
RESUMO
Heavy metal ions (HMIs) have been widely applied in various industries because of their excellent physicochemical properties. However, their discharging without appropriate treatment brought about serious pollution problems. So it is desirable but challenging to rapidly and completely clean up these toxic pollutants from water, especially utilizing environmentally friendly and naturally rich biomass materials. In this work, we prepared nanocellulose/carbon dots/magnesium hydroxide (CCMg) ternary composite using cotton via a simple hydrothermal method. The removal mechanism towards Cd2+ and Cu2+ was investigated using a combination of experimental techniques and density functional theory calculations. CCMg shows a good ability to remove HMIs. It is realized that the interaction between each component of CCMg and cadmium nitrate is mainly of hydrogen/dative bonds. Cadmium nitrate is preferentially enriched by the Mg(OH)2 moiety, proved by calculated thermodynamics, interfacial interactions and charges. After transformation, the cadmium carbonate precipitate is fixed on the surface by nanocellulose (NC) via chemical coupling; and of interest is that copper ion precipitates in the form of basic sulfate. Due to its high adsorption effect and simple recovery operation, CCMg is having a wide range of application prospects as a water treatment agent.
Assuntos
Metais Pesados , Poluentes Químicos da Água , Águas Residuárias , Carbono , Metais Pesados/química , Cádmio/química , Nitratos , Adsorção , Íons , Poluentes Químicos da Água/química , Cinética , Concentração de Íons de HidrogênioRESUMO
The successful management and safe disposal of high-level nuclear waste necessitate the efficient separation of actinides (An) from lanthanides (Ln), which has emerged as a crucial prerequisite. Mixed donor ligands incorporating both soft and hard donor atoms have garnered interest in the field of An/Ln separation and purification. One such example is nitrilotriacetamide (NTAamide) derivatives, which have demonstrated selectivity in extracting minor actinide Am(III) ions over Eu(III) ions. Nevertheless, the Am/Eu complexation behavior and selectivity remain underexplored. In the work, a comprehensive and systematic investigation has been conducted for [M(RL)(NO3)3] complexes (M = Am and Eu) utilizing relativistic density functional theory. The NTAamide ligand (RL) is substituted with various alkyl groups, namely, methyl, ethyl, propyl, n-butyl, n-pentyl, n-hexyl, n-heptyl, and n-octyl. Thermodynamic calculations show that the alkyl chain length in NTAamide is capable of tuning the separation selectivity of Am and Eu. Moreover, the differences in calculated free energies between Am and Eu complexes are more negative for R = Bu-Oct than Me-Pr. This indicates that elongation of the alkyl chain can increase the efficiency of selective separation of Am(III) from Eu(III). Based on the quantum theory of atoms in molecules and charge decomposition analyses, it has been observed that the strength of Am-RL bonds is higher than that of Eu-RL bonds. This disparity is attributed to a greater degree of covalency in Am-RL bonds and a higher level of charge transfer from ligands to Am within complexes containing these bonds. Energies of occupied orbitals with the central N character are recognized overall lower for [Am(OctL)(NO3)3] than for [Eu(OctL)(NO3)3], indicative of stronger complexation stability of the former. These results offer valuable insights into the separation mechanism of NTAamide ligands, which can help guide the development of more powerful agents for An/Ln separation in future applications.
RESUMO
It is desirable but challenging to sense toxic nitrogen dioxide (NO2) for it has become one of the most prominent air pollutants. Zinc oxide-based gas sensors are known to detect NO2 gas efficiently, however, the sensing mechanism and involved intermediates structures remain underexplored. In the work, a series of sensitive materials, including zinc oxide (ZnO) and its composites ZnO/X [X = Cel (cellulose), CN (g-C3N4) and Gr (graphene)] have been comprehensively examined by density functional theory. It is found that ZnO favors adsorbing NO2 over ambient O2, and produces nitrate intermediates; and H2O is chemically held by zinc oxide, in line with the non-negligible impact of humidity on the sensitivity. Of the formed composites, ZnO/Gr exhibits the best NO2 gas-sensing performance, which is proved by the calculated thermodynamics and geometrical/electronic structures of reactants, intermediates and products. The interfacial interaction has been elaborated on for composites (ZnO/X) as well as their complexes (ZnO- and ZnO/X-adsorbates). The current study well explains experimental findings and opens up a way to design and unearth novel NO2 sensing materials.
Assuntos
Poluentes Atmosféricos , Grafite , Óxido de Zinco , Óxido de Zinco/química , Grafite/química , Dióxido de Nitrogênio/análise , Poluentes Atmosféricos/análise , CeluloseRESUMO
To solve pollution problem of heavy metal ions (HMIs) and recover them for sustainable development, a high-efficient-sewage treatment agent, carbon dots/cellulose nanofiber/Mg(OH)2 (CCMg), has been fabricated via a simple hydrothermal method. A variety of characterizations show that cellulose nanofiber (CNF) formed a layered-net structure. Hexagonal Mg(OH)2 flakes of about 100 nm has been attached on CNF. Carbon dots (CDs) around 10-20 nm in size were produced from CNF and distributed along CNF. The extraordinary structural feature endows CCMg with high removal performance towards HMIs. The up-taken capacities reach 992.8 and 667.3 mg g-1 for Cd2+ and Cu2+, respectively. The composite bears excellent durability in treating wastewater. Notably, the qualification of the drinking water can be satisfied while applying CCMg to handle Cu2+ wastewater. The mechanism of removal process has been proposed. Practically, Cd2+/Cu2+ ions were immobilized by CNF due to the space confinement effect. It achieves the facile separation and recovery of HMIs from the sewage, and more importantly, eliminates the risk of secondary contamination.
Assuntos
Metais Pesados , Nanofibras , Hidróxido de Magnésio , Carbono , Celulose/química , Nanofibras/química , Águas Residuárias , Esgotos , Metais Pesados/química , Íons/químicaRESUMO
Active packaging materials protect food from deterioration and extend its shelf life. In the quest to design intriguing packaging materials, biocomposite ZnO/plant polyphenols/cellulose/polyvinyl alcohol (ZnPCP) was prepared via simple hydrothermal and casting methods. The structure and morphology of the composite were fully analyzed using XRD, FTIR, SEM and XPS. The ZnO particles, plant polyphenols (PPL) and cellulose were found to be dispersed in PVA. All of these components share their unique functions with the composite's properties. This study shows that PPL in the composite not only improves the ZnO dispersivity in PVA as a crosslinker, but also enhances the water barrier of PVA. The ZnO, PPL and cellulose work together, enabling the biocomposite to perform as a good food packaging material with only a 1% dosage of the three components in PVA. The light shielding investigation showed that ZnPCP-10 can block almost 100% of both UV and visible light. The antibacterial activities were evaluated by Gram-negative Escherichia coli (E. coli) and Gram-positive staphylococcus aureus (S. aureus), with 4.4 and 6.3 mm inhibition zones, respectively, being achieved by ZnPCP-10. The enhanced performance and easy degradation enables the biocomposite ZnPCP to be a prospect material in the packaging industry.
Assuntos
Quitosana , Óxido de Zinco , Embalagem de Alimentos , Álcool de Polivinil/química , Celulose/química , Óxido de Zinco/química , Quitosana/química , Staphylococcus aureus , Escherichia coli , Antibacterianos/farmacologia , Antibacterianos/químicaRESUMO
Transition metal oxides (TMOs) and actinide ones (AnOs) have been widely applied in catalytic reactions due to their excellent physicochemical properties. However, the reaction pathway and mechanism, especially involving TM-An heterometallic centers, remain underexplored. In this respect, relativistic density functional theory (DFT) was used to examine uranium-doped zinc, copper, and nickel oxides for their catalytic activity toward the conversion of furfural to furfuryl alcohol. A comparison was made with their undoped TMOs. It was found that the three TMOs were capable of catalyzing the reaction, where the free energies of adsorption, hydrogenation, and desorption fell between -33.93 and 45.00 kJ/mol. The uranium doping extremely strengthened the adsorption of CuO-U and NiO-U toward furfural, making hydrogenation or desorption much harder. Intriguingly, ZnO-U showed the best catalytic performance among all six catalyst candidates, as its three reaction energies were very small (-10.54-8.12 kJ/mol). The reaction process and mechanism were further addressed in terms of the geometrical, bonding, charge, and electronic properties.
RESUMO
The specification of the local structure and clarification of interfacial interactions of biomass composites is of tremendous significance in synthesizing novel materials and advancing their performance in various demanding applications. However, it remains challenging due to the limitations of experimental techniques, particularly for the manner that biomass composites commonly have hydrogen bonds involved in the vicinity of active sites and interfaces. Herein, the cellulose/Mg(OH)2 nanocomposite has been synthesized via a simple hydrothermal approach and examined by density functional theory (DFT) calculations. The composite exhibits a layered morphology; Mg(OH)2 flakes are around 50 nm in size and well-dispersed. They either anchor onto the cellulose surface or intercalate between layers. The specific composite structure was confirmed theoretically, in line with XRD, SEM and TEM observations. The interfacial interactions were found to be hydrogen bonding. The average adsorption energy per hydroxyl group was computed to be within -0.47 and -0.26 eV for a composite model comprising three cellulose chains and a two-layered Mg(OH)2 cluster. The combined computational/experimental results allow to postulate the antibacterial mechanism of the nanocomposite.
Assuntos
Antibacterianos/química , Celulose/análogos & derivados , Hidróxido de Magnésio/química , Nanocompostos/química , Adsorção , Antibacterianos/farmacologia , Biomassa , Ligação de Hidrogênio , TermodinâmicaRESUMO
The interfacial chemistry of nanocomposite materials is of overarching importance in the separation and purification science; moreover, its understanding helps to guide synthesis, clarify structure-property relationship and unearth novel applications. However, the composites feature rather complicated local structures and hydrogen bonds are often involved in the interface and the vicinity of active sites. In this regard, density functional theory first-principle calculations associated with experimental study have synergistically examined two-dimensional (2D) magnesium hydroxide material with different layers and their adsorption toward cellobiose. Hydrogen bonds are found responsible for the interfacial coupling, which make it vital to cover the dispersion correction in the calculation. The average adsorption energy ranges from -0.29 to -0.35 eV, falling well within the range of reported hydrogen-bonding strength. On the basis of calculated structural/interfacial properties and experimental findings, the 2D Mg(OH)2 in terms of three-layer model was unraveled to substitute toxic Cd2+ ion and sorb radioactive UO22+ that is coordinated by water and hydroxyl groups. These reactions are thermodynamically feasible. The ion-exchanging mechanism was proposed for cadmium removal and the outer-sphere adsorption one for uranium extraction.
Assuntos
Cádmio , Celobiose , Adsorção , Troca Iônica , ÍonsRESUMO
In-depth understanding of interfacial property is the key to guiding the synthesis of biomass composites with desired performance. However, the exploration is of great challenge due to limitations of experimental techniques in locating hydrogen, requiring large/good crystals and detecting a weak interaction like van der Waals (vdW). Herein, we experimentally and computationally investigated the composite cellulose/zinc oxide/g-C3N4. Hydrothermal synthesis afforded cellulose/ZnO, and then fabricated the ternary composite by adding g-C3N4 under ultrasonic condition. Three components are found to co-exist in the composite, and the ZnO nanoparticle is attaching to cellulose and coupling with g-C3N4. These experimental findings were corroborated by relativistic DFT calculations. The interfacial coupling is elaborated as contributions of dative bonds, hydrogen bonds and vdW interaction. The vdW is increased by a factor of 4.23 in the ZnO/g-C3N4 interface. This improves electron-hole separation and offers prospective application of the composite in photocatalysis, antibacteria and gas sensing.
Assuntos
Celulose/química , Grafite/química , Nanocompostos/química , Compostos de Nitrogênio/química , Óxido de Zinco/química , Catálise/efeitos da radiação , Celulose/efeitos da radiação , Teoria da Densidade Funcional , Grafite/efeitos da radiação , Luz , Modelos Químicos , Nanocompostos/efeitos da radiação , Compostos de Nitrogênio/efeitos da radiação , Eletricidade Estática , Óxido de Zinco/efeitos da radiaçãoRESUMO
An Fe3O4/carboxymethyl cellulose (Fe3O4/CMC) magnetic biosorbent was prepared using the ion-imprinting technology, where La(iii) was used as the template ion. The morphology and structure of Fe3O4/CMC were characterized by SEM, FTIR and XRD. It is found that nano Fe3O4 with inverse spinel structure can distribute in CMC and endow the composite with good magnetic properties. The adsorption performance such as adsorption capacity, influence of pH and initial concentration were fully explored. The prepared Fe3O4/CMC is revealed to have good adsorption properties with Q max of 61.5 mg g-1, in line with the pseudo-second-order kinetic model. When handling the multi-ion coexistence solution of Cu(ii), Ni(ii) and Cd(ii), Fe3O4/CMC shows high selective adsorption for La(iii). Meanwhile, cycling experiments find that the adsorption capacity is only slightly reduced (less than 5%) after 5-time reuse. Good adsorption properties, high selectivity and easy recovery give the newly-synthesized Fe3O4/CMC biosorbent broad application potential in the treatment of La(iii)-containing wastewater.
RESUMO
Due to its good properties and low cost, melamine formaldehyde foam has been widely used in cars, furniture and construction. However, how to recycle the spent foam still remains challenging for scientists. In this work, a new method was designed to prepare N-doped carbon dot (NCD) materials by calcining sodium lignin sulfonate/melamine formaldehyde foam (LSMF) via one step. TEM, IR and XPS were used to characterize the structure and morphology of newly-synthesized NCDs. It is shown that carbon powder is obtainable by calcination. Since it derives from the collapse of the foam structure of LSMF, the carbon powder can almost completely dissolve in deionized water. The particle size ranges from 5 to 20 nm. The fluorescence properties of NCDs were studied by fluorescence spectroscopy. A strong emission has been detected at 580 nm with the quantum yield of 2.94%. When applying NCDs to detect various metal ions, there is a significant fluorescence quenching effect and good selectivity for Fe3+. The mechanism has been hypothesised. Our study provides a method for productive preparation of NCDs from spent foam.
RESUMO
With the reported CO2 activation for the oxidation of benzene to phenol (-ENE â -OL) by the graphitic carbon nitride g-C3N4 (CN) via an artificial photosynthetic route as inspiration, high-valent actinyls (AnmO2)n+ (An = U, Np, Pu; m = VI, V; n = 2, 1) have been introduced for its further modification. Our calculations indicate thermodynamic spontaneity in the feasibility of g-C3N4-(AnmO2)n+ (CN-Anm) formation. The magnificent structural and electronic properties of CN-Anm are utilized for CO2 activation in terms of the rarely studied -ENE â -OL conversion. The calculated free energies show that most steps of the catalytic cycle are favored by CN-Anm complexes. The first step (carbamate formation) is slightly endothermic in all cases, where CN-U is 0.51 eV higher than CN and CN-Pu is -0.01 eV lower. All benzene addition reactions release energy, with that for CN-U being the lowest. The phenolate formation is favored by some actinyl complexes over CN, and CN-U is only 0.23 eV higher. The phenol release (resulting in formamide complexes) and CO desorption are exothermic for all CN-Anm. The overall process suggests the improved catalytic performance of actinyl-modified CN materials, and the slightly depleted uranyl-carbon nitride could be one of the promising catalysts.
RESUMO
The lignin amine (LA) was exploited to prepare dually N/S-doped carbon (NSC), which was endowed with intriguing porous structure by Fe3O4 template. N and S elements, originating from LA, are doped into the materials. NSC possesses diverse-scale 3D pores. The macropores are made by Fe3O4, which facilitate to produce meso and micro pores on their walls by KOH activation. The sample prepared at 700 °C (NSC-700) is found to have the largest specific surface area (1199 cm2 g-1) and specific capacity (241 F g-1 at current density of 1 A g-1). Its capacity is 260% as high as that of lignin amine carbon (LAC) prepared without adding Fe3O4. Excellent rate performance is unraveled because of possessing 82% specific capacity at 20 A g-1 and 27.2 Wh kg-1 energy density at 10000 W kg-1 power density. Moreover, the specific capacity maintains 95.0% after 3000 cycles, indicating good electrochemical stability. The good electrical performance of NSC-700 is attributed to its interesting electronic properties that are induced by special pore structure. Because of having merits such as high rate performance, long life, large specific capacity and low cost, our NSC is anticipated to be a promising capacitor as electrode material.
Assuntos
Biomassa , Carbono/química , Capacitância Elétrica , Lignina/química , Nitrogênio/química , Enxofre/química , Aminas/química , Fenômenos Químicos , Eletroquímica , Fosfatidiletanolaminas/química , Porosidade , Análise EspectralRESUMO
A g-C3N4/ZnO/cellulose ternary composite (labeled as CNZCel) with an ordered structure and excellent antibacterial properties has been successfully synthesized via a facile method. Its morphology, microstructure and components have been analyzed by using XRD, SEM, TEM and EDS, and the results corroborate the co-existence of three components in the ternary composite. It is revealed that ZnO particles are connected to the layered g-C3N4 and simultaneously attached to the cellulose substrate. This microstructural feature is also borne out by the relativistic density functional study of a finite g-C3N4-ZnO-cellulose cluster. Both experimental and theoretical results unravel that the interfacial bonding interactions in the ternary composite improve electron transfer among components and enable high-efficiency spatial separation of photogenerated electrons and holes. Consequently, good antibacterial performance of the composite has been found in tests. This study provides the prospect of preparing low-cost and environment-friendly food packaging materials, which are also endowed with excellent antibacterial activity.
Assuntos
Antibacterianos/farmacologia , Celulose/farmacologia , Grafite/farmacologia , Nanocompostos/química , Compostos de Nitrogênio/farmacologia , Óxido de Zinco/farmacologia , Antibacterianos/síntese química , Antibacterianos/química , Celulose/química , Teoria da Densidade Funcional , Escherichia coli/efeitos dos fármacos , Grafite/química , Testes de Sensibilidade Microbiana , Compostos de Nitrogênio/química , Tamanho da Partícula , Staphylococcus aureus/efeitos dos fármacos , Propriedades de Superfície , Óxido de Zinco/químicaRESUMO
Heterobimetallic uranium-transition metal (U-TM) complexes have abundant active centers (two metals and several ancillary ligands with various donor atoms) and possible metal-metal bonding interaction, leading to diversified electronic structures and rather complicated electronic transition types. In this regard, a comprehensive and systematic theoretical study is highly desired although challenging. In the work, density functional theory (DFT) was utilized to examine a series of uranium-group 10 metal complexes supported by bidentate phosphinoaryl oxide ligands (labeled as L). TM (Ni, Pd, and Pt), uranium oxidation state (IV and III) and axial donor (I, Br, Cl, F, Me3SiO, and vacant) were varied. Calculations demonstrate an intrinsic TM â U dative bond. The order of bond strength of U-Ni > U-Pt > U-Pd is suggested by the formal shortness ratios, quantum theory of atoms in molecule (QTAIM) data, interaction energy ( Eint), and bond orders calculated at various levels of theory. It is further evidenced by relativistic effects of heavy metal, natural orbital population and electronic spectroscopy. Regarding U-Ni complexes with different axial donors, metal-metal distances are found to be linearly correlated with QTAIM data/ Eint/bond orders. Experimental UV-vis-NIR spectra were well reproduced by time-dependent DFT calculations. Complicated visible-light absorption bands, whose understanding remains unclear for many experimentally known heterobimetallic complexes, were rationalized in the work, along with NIR bands assigned as 5f â 5f transitions.
RESUMO
The reaction of (THF)(H2L)(UVIO2) (L is a tetra-anion of polypyrrolic macrocycle) with AnIIICp3 (Cp = cyclopentadienyl) afforded two intriguing cation-cation interaction (CCI) complexes (i.e., uranyl-Np and -U), but did not yield the uranyl-Pu analogue. To complement and extend experimental results, a scalar relativistic density functional theory has been performed on the formation reactions and various relevant properties of (THF)(A2L)(OUO)-An(CpX)3 (A = Li and H; An = Pu, Np, and U; X = Me, H, Cl, and SiMe3). Inspired by a strategy that improves uranyl precursor reactivity, we utilized (THF)(Li2L)(UVIO2) instead to gain a uranyl-Pu complex. Reaction free energy is reduced even to be negative (i.e., undergoing an exergonic process), which provides the thermodynamic possibility for experimental synthesis. This manner is further rationalized by the lithiated precursor showing the increased Li-Oendo bond, uranium oxidation ability (VI â V), and exo-oxo basicity, as well as the lithiated uranyl-Pu product having more amount of electron transfer and a stronger Oexo-Pu bond (i.e., representing the CCI). Electronic structures and electron-transfer analyses reveal a UV-PuIV oxidation state for the new complex. Applying the more reactive lithiated precursor also decreases the formation reaction energies of uranyl-An (An = Np and U) complexes. The second strategy via exploiting substituted Cp to raise the reactivity of the plutonium reactant does not work well.
RESUMO
In-depth understanding of interfacial behavior between biopolymer and semiconductor metal oxides is crucial to developing potential applications of their composites. A structure-ordered cellulose/zinc oxide composite was synthesized and systematically examined by a relativistic density functional theory. The prepared composite shows a hierarchical structure. ZnO nanoparticles of around 30â¯nm in size are found to uniformly grow along the cellulose fiber, which together construct the primary-structure unit. Associated with experimental characterizations, calculations unravel that the electrostatic attraction between cellulose and ZnO is the main driving force to form the primary structure and the subsequent electron transfer from cellulose to ZnO enhances their interfacial interaction; moreover, an exothermic process was computed. The interfacial interaction is mainly contributed by Zn-Oc (Oc denotes the cellulose oxygen atom), which is intrinsically of a dative bond; the interaction was calculated between -1.39 and -1.83â¯eV in strength and dominated by orbital attractions.
RESUMO
Relativistic density functional theory finds that two isomers of a diuranium(III) complex of a polypyrrolic macrocycle (H4L) feature active sites on uranium moieties, allowing for their potential application in activating industrially and economically important small molecules. To address this, a series of adducts [(X)nU2(L)]((2-m)+) (X = THF, I(-) and HI; n = 1 and 2; m = 0, 1 and 2) have been examined. The coordination from X to the exposed uranium(s) changes the general geometry and electronic structure slightly. Thermodynamic calculations reveal that iodine termination is energetically favored over THF/HI coordination. Graphical abstract Scalar and spin-orbit coupling relativistic DFT calculation reveals that the active sites on the uranium moieties of [U2(L)](2+) lead to formation of adducts [(THF)nU2(L)](2+), [InU2(L)]((2-n)+) and [(HI)nU2(L)](2+) (n = 1 and 2). Coordination to the exposed uranium(s) changes geometrical and electronic properties slightly, but iodine termination is the most energetically favored.
RESUMO
With the assistance of sodium lignosulfonate, hierarchical nanoflake-array-flower nanostructure of ZnO has been fabricated by a facile precipitation method in mixed solvents. The sodium lignosulfonate amount used in our synthetic route is able to fine-tune ZnO morphology and an abundance of pores have been observed in the nanoflake-array-flower ZnO, which result in specific surface area reaching as high as 82.9 m(2) · g(-1). The synthesized ZnO exhibits superior photocatalytic activity even under low-power UV illumination (6 W). It is conjectured that both nanoflake-array structure and plenty of pores embedded in ZnO flakes may provide scaffold microenvironments to enhance photocatalytic activity. Additionally, this catalyst can be used repeatedly without a significant loss in photocatalytic activity. The low-cost, simple synthetic approach as well as high photocatalytic and recycling efficiency of our ZnO nanomaterials allows for application to treat wastewater containing organic pollutants in an effective way.