Three-Dimensional Electrodeposition of Calcium Phosphates on Porous Nanofibrous Scaffolds and Their Controlled Release of Calcium for Bone Regeneration.

To mimic the bone matrix of mineralized collagen and to impart microporous structure to facilitate cell migration and bone regeneration, we developed a nanofibrous (NF) polymer scaffold with highly interconnected pores and three-dimensional calcium phosphate coating utilizing an electrodeposition technique. The mineral content, morphology, crystal structure, and chemical composition could be tailored by adjusting the deposition temperature, voltage, and duration. A higher voltage and a higher temperature led to a greater rate of mineralization. Furthermore, nearly linear calcium releasing kinetics was achieved from the mineralized 3D scaffolds. The releasing rate was controlled by varying the initial electrodeposition conditions. A higher deposition voltage and temperature led to slower calcium release, which was associated with the highly crystalline and stoichiometric hydroxyapatite content. This premineralized NF scaffold enhanced bone regeneration over the control scaffold in a subcutaneous implantation model, which was associated with released calcium ions in facilitating osteogenic cell proliferation.

Pore size directs bone marrow stromal cell fate and tissue regeneration in nanofibrous macroporous scaffolds by mediating vascularization.

In the U.S., 30% of adults suffer joint pain, most commonly in the knee, which severely limits mobility and is often attributed to injury of cartilage and underlying bone in the joint. Current treatment methods such as microfracture result in less resilient fibrocartilage with eventual failure; autografting can cause donor site morbidity and poor integration. To overcome drawbacks in treatment, tissue engineers can design cell-instructive biomimetic scaffolds using biocompatible materials as alternate therapies for osteochondral defects. Nanofibrous poly (l-lactic acid) (PLLA) scaffolds of uniform, spherical, interconnected and well-defined pore sizes that are fabricated using a thermally-induced phase separation and sugar porogen template method create an extracellular matrix-like environment which facilitates cell adhesion and proliferation. Herein we report that chondrogenesis and endochondral ossification of rabbit and human bone marrow stromal cells (BMSCs) can be controlled by scaffold pore architecture, particularly pore size. Small-pore scaffolds support enhanced chondrogenic differentiation in vitro and cartilage formation in vivo compared to large-pore scaffolds. Endochondral ossification is prevented in scaffolds with very small pore sizes; pore interconnectivity is critical to promote capillary ingrowth for mature bone formation. These results provide a novel strategy to control tissue regenerative processes by tunable architecture of macroporous nanofibrous scaffolds. STATEMENT OF SIGNIFICANCE: Progress in understanding the relationship between cell fate and architectural features of tissue engineering scaffolds is critical for engineering physiologically functional tissues. Sugar porogen template scaffolds have uniform, spherical, highly interconnected macropores. Tunable pore-size guides the fate of bone marrow stromal cells (BMSCs) towards chondrogenesis and endochondral ossification, and is a critical design parameter to mediate neotissue vascularization. Preventing vascularization favors a chondrogenic cell fate while allowing vascularization results in endochondral ossification and mineralized bone formation. These results provide a novel strategy to control tissue regenerative processes by tunable architecture of macroporous nanofibrous scaffolds.

Nanofibrous spongy microspheres enhance odontogenic differentiation of human dental pulp stem cells.

Dentin regeneration is challenging due to its complicated anatomical structure and the shortage of odontoblasts. In this study, a novel injectable cell carrier, nanofibrous spongy microspheres (NF-SMS), is developed for dentin regeneration. Biodegradable and biocompatible poly(l-lactic acid)-block-poly(l-lysine) are synthesized and fabricated into NF-SMS using self-assembly and thermally induced phase separation techniques. It is hypothesized that NF-SMS with interconnected pores and nanofibers can enhance the proliferation and odontogenic differentiation of human dental pulp stem cells (hDPSCs), compared to nanofibrous microspheres (NF-MS) without pore structure and conventional solid microspheres (S-MS) with neither nanofibers nor pore structure. During the first 9 d in culture, hDPSCs proliferate significantly faster on NF-SMS than on NF-MS or S-MS (p < 0.05). Following in vitro odontogenic induction, all the examined odontogenic genes (alkaline phosphatase content, osteocalcin, bone sialoprotein, collagen 1, dentin sialophosphoprotein (DSPP)), calcium content, and DSPP protein content are found significantly higher in the NF-SMS group than in the control groups. Furthermore, 6 weeks after subcutaneous injection of hDPSCs and microspheres into nude mice, histological analysis shows that NF-SMS support superior dentin-like tissue formation compared to NF-MS or S-MS. Taken together, NF-SMS have great potential as an injectable cell carrier for dentin regeneration.

Injectable Peptide Decorated Functional Nanofibrous Hollow Microspheres to Direct Stem Cell Differentiation and Tissue Regeneration.

Injectable microspheres are attractive stem cell carriers for minimally invasive procedures. For tissue regeneration, the microspheres need to present the critical cues to properly direct stem cell differentiation. In natural extracellular matrix (ECM), growth factors (GFs) and collagen nanofibers provide critical chemical and physical cues. However, there have been no reported technologies that integrate synthetic nanofibers and GFs into injectable microspheres. In this study, we synthesized functional nanofibrous hollow microspheres (FNF-HMS), which can covalently bind GF-mimicking peptides. Two different GF-mimicking peptides, Transforming Growth Factor-ß1 mimicking peptide Cytomodulin (CM) and Bone Morphogenetic Protein-2 mimicking peptide P24, were separately conjugated onto the FNF-HMS to induce distinct differentiation pathways of rabbit bone marrow-derived mesenchymal stem cells (BMSCs). While no existing biomaterials were reported to successfully deliver CM to induce chondrogenesis, the developed FNF-HMS were shown to effectively present CM to BMSCs and successfully induced their chondrogenesis for cartilage formation in both in vitro and in vivo studies. In addition, P24 was conjugated onto the newly developed FNF-HMS and was capable of retaining its bioactivity and inducing ectopic bone formation in nude mice. These results demonstrate that the novel FNF-HMS can effectively deliver GF-mimicking peptides to modulate stem cell fate and tissue regeneration.

Gene therapy for nucleus pulposus regeneration by heme oxygenase-1 plasmid DNA carried by mixed polyplex micelles with thermo-responsive heterogeneous coronas.

Safe and high-efficiency gene therapy for nucleus pulposus (NP) regeneration was urgently desired to treat disc degeneration-associated diseases. In this work, an efficient nonviral cationic block copolymer gene delivery system was used to deliver therapeutic plasmid DNA (pDNA), which was prepared via complexation between the mixed cationic block copolymers, poly(ethylene glycol)-block-poly{N-[N-(2-aminoethyl)-2-aminoehtyl]aspartamide} [PEG-b-PAsp(DET)] and poly(N-isopropylacrylamide)-block-PAsp(DET) [PNIPAM-b-PAsp(DET)], and pDNA at 25 °C. The mixed polyplex micelles (MPMs) containing heterogeneous coronas with hydrophobic and hydrophilic microdomains coexisting could be obtained upon heating from 25 to 37 °C, which showed high tolerability against nuclease and strong resistance towards protein adsorption. The gene transfection efficiency of MPMs in NP cells was significantly higher than that of regular polyplex micelles prepared from sole block copolymer of PEG-b-PAsp(DET) (SPMs) in in vitro and in vivo evaluation due to the synergistic effect of improved colloidal stability and low cytotoxicity. High expression of heme oxygenase-1 (HO-1) in NP cells transfected by MPMs loading HO-1 pDNA significantly decreased the expression activity of matrix metalloproteinases 3 (MMP-3) and cyclo-oxygenase-2 (COX-2) induced by interleukin-1ß (IL-1ß), and simultaneously increased the NP phenotype-associated genes such as aggrecan, type II collagen, and SOX-9. Moreover, the therapeutic effects of MPMs loading pDNA were tested to treat disc degeneration induced by stab injury. The results demonstrated that administration of HO-1 pDNA carried by MPMs in rat tail discs apparently reduced inflammatory responses induced by need stab and increased glycosaminoglycan (GAG) content, finally achieving better therapeutic efficacy as compared with SPMs. Consequently, MPMs loading HO-1 pDNA were demonstrated to be potential as a safe and high-efficiency nonviral gene delivery system for retarding or regenerating the degenerative discs.

Hypoxia promotes nucleus pulposus phenotype in 3D scaffolds in vitro and in vivo: laboratory investigation.

OBJECT: The role of oxygen in disc metabolism remains a matter of debate. Whether the effect of hypoxic priming on the nucleus pulposus phenotype can be maintained in vivo is not clear. The goal of the present study was to test the hypothesis that priming in a low oxygen tension in vitro could promote a nucleus pulposus phenotype in vivo. METHODS: Bovine nucleus pulposus cells were seeded in 3D scaffolds and subjected to varying oxygen tensions (2% and 20%) for 3 weeks. The constructs were then implanted subcutaneously for 8 weeks. Changes in the extracellular matrix were evaluated using quantitative real-time reverse transcriptase polymerase chain reaction, glycosaminoglycan (GAG) assay, DNA assay, collagen quantification, and histological and immunohistological analyses. RESULTS: Hypoxia resulted in greater production of sulfated glycosaminoglycan and higher levels of gene expression for collagen Type II, aggrecan, and SOX-9. Furthermore, after hypoxic priming, the subcutaneously implanted constructs maintained the nucleus pulposus phenotype, which was indicated by a significantly higher amount of glycosaminoglycan and collagen Type II. CONCLUSIONS: Hypoxia enhanced the nucleus pulposus phenotype under experimental conditions both in vitro and in vivo. When used in combination with appropriate scaffold material, nucleus pulposus cells could be regenerated for tissue-engineering applications.

Biomaterials and stem cells for tissue engineering.

INTRODUCTION: Organ failure and tissue loss are challenging health issues due to widespread injury, the lack of organs for transplantation and limitations of conventional artificial implants. The field of tissue engineering aims to provide alternative living substitutes that restore, maintain or improve tissue function. AREAS COVERED: In this paper, a wide range of porous scaffolds are reviewed, with an emphasis on phase-separation techniques that generate advantageous nanofibrous 3D scaffolds for stem cell-based tissue engineering applications. In addition, methods for presentation and delivery of bioactive molecules to mimic the properties of stem cell niches are summarized. Recent progress in using these bioinstructive scaffolds to support stem cell differentiation and tissue regeneration is also presented. EXPERT OPINION: Stem cells have great clinical potential because of their capability to differentiate into multiple cell types. Biomaterials have served as artificial extracellular environments to regulate stem cell behavior. Biomaterials with various physical, mechanical and chemical properties can be designed to control stem cell development for regeneration. CONCLUSION: The research at the interface of stem cell biology and biomaterials has made and will continue to make exciting advances in tissue engineering.

Regenerating nucleus pulposus of the intervertebral disc using biodegradable nanofibrous polymer scaffolds.

Low back pain is a leading health problem in the United States, which is most often resulted from nucleus pulposus (NP) degeneration. To date, the replacement of degenerated NP relies entirely on mechanical devices. However, a biological NP replacement implant is more desirable. Here, we report the regeneration of NP tissue using a biodegradable nanofibrous (NF) scaffold. Rabbit NP cells were seeded on the NF scaffolds to regenerate NP-like tissue both in vitro and in a subcutaneous implantation model. The NP cells on the NF scaffolds proliferated faster than those on control solid-walled (SW) scaffolds in vitro. Significantly more extracellular matrix (ECM) production (glycosaminoglycan and type II collagen) was found on the NF scaffolds than on the control SW scaffolds. The constructs were then implanted in the caudal spine of athymic rats for up to 12 weeks. The tissue-engineered NP could survive, produce functional ECM, remain in place, and maintain the disc height, which is similar to the native NP tissue.

Development of channeled nanofibrous scaffolds for oriented tissue engineering.

A tissue-engineering scaffold resembling the structure of the natural extracellular matrix can often facilitate tissue regeneration. Nerve and tendon are oriented micro-scale tissue bundles. In this study, a method combining injection molding and thermally induced phase separation techniques is developed to create single- and multiple-channeled nanofibrous poly(L-lactic acid) scaffolds. The overall shape, the number and spatial arrangement of channels, the channel wall matrix architecture, the porosity and mechanical properties of the scaffolds are all tunable. The porous NF channel wall matrix provides an excellent microenvironment for protein adsorption and the attachment of PC12 neuronal cells and tendon fibroblast cells, showing potential for neural and tendon tissue regeneration.

Effects of hypoxias and scaffold architecture on rabbit mesenchymal stem cell differentiation towards a nucleus pulposus-like phenotype.

Nucleus pulposus grafts are needed for patients requiring replacement of their degenerated intervertebral discs. Bone marrow-derived mesenchymal stem cells (MSCs) are a potential autologous stem cell source for the nucleus pulposus regeneration. One of the key issues of constructing functional nucleus pulposus using MSCs, however, is to differentiate MSCs into nucleus pulposus phenotype in vitro and to maintain their phenotypic stability in vivo. In this study, three-dimensional (3D) nanofibrous poly(l-lactide) (PLLA) scaffolds were seeded with multi-potent rabbit MSCs and the constructs were induced along nucleus pulposus development routes in a hypoxia chamber (2% O(2)) in the presence of TGF-ß1. It was found that nanofibrous scaffold could support the differentiation of rabbit MSCs towards a nucleus pulposus-like phenotype in vitro, as evidenced by upregulated expression of a few important nucleus pulposus-associated genes (aggrecan, type II collagen and Sox-9), abundant deposition of extracellular matrix (glycosaminoglycan (GAG) and type II collagen), and the continuous expression of the nucleus pulposus-specific marker, hypoxia-inducible factor (HIF)-1α. The subcutaneous implantation results confirmed that hypoxic induction before implantation could help the constructs to retain their phenotype and resist calcification in vivo. Therefore, the above data showed the promise of using 3D nanofibrous scaffolds in combination with TGF-ß1 and hypoxic induction to regenerate functional nucleus pulposus grafts for intervertebral disc replacement.