Interfacial Behavior of Biodegradable Poly(lactic-co-glycolic acid)-Pluronic F127 Nanoparticles and Its Impact on Pickering Emulsion Stability.

Biodegradable nanoparticle-based emulsions exhibit immense potential in various applications, particularly in the pharmaceutical, cosmetic, and food industries. This study delves into the intricate interfacial behavior of Pluronic F127 modified poly(lactic-co-glycolic acid) (PLGA-F127) nanoparticles, a crucial determinant of their ability to stabilize Pickering emulsions. Employing a combination of Langmuir balance, surface tension, and diffusion coefficient measurements, we investigate the interfacial dynamics of PLGA-F127 nanoparticles under varying temperature and ionic strength conditions. Theoretical calculations are employed to elucidate the underlying mechanisms governing these phenomena. Our findings reveal a profound influence of temperature-dependent Pluronic layer behavior and electrostatic and steric interactions on the interfacial dynamics. Nonlinear changes in surface tension are observed, reflecting the interplay of these factors. Particle aggregation is found to be prevalent at elevated temperatures and ionic strengths, compromising the stability and emulsification efficiency of the formed emulsions. This work provides insights into the rational design of stable and efficient biodegradable nanoparticle-based Pickering emulsions, broadening their potential applications in various fields.

In situ captured antibacterial action of membrane-incising peptide lamellae.

Developing unique mechanisms of action are essential to combat the growing issue of antimicrobial resistance. Supramolecular assemblies combining the improved biostability of non-natural compounds with the complex membrane-attacking mechanisms of natural peptides are promising alternatives to conventional antibiotics. However, for such compounds the direct visual insight on antibacterial action is still lacking. Here we employ a design strategy focusing on an inducible assembly mechanism and utilized electron microscopy (EM) to follow the formation of supramolecular structures of lysine-rich heterochiral ß3-peptides, termed lamellin-2K and lamellin-3K, triggered by bacterial cell surface lipopolysaccharides. Combined molecular dynamics simulations, EM and bacterial assays confirmed that the phosphate-induced conformational change on these lamellins led to the formation of striped lamellae capable of incising the cell envelope of Gram-negative bacteria thereby exerting antibacterial activity. Our findings also provide a mechanistic link for membrane-targeting agents depicting the antibiotic mechanism derived from the in-situ formation of active supramolecules.

Polymorphic amyloid nanostructures of hormone peptides involved in glucose homeostasis display reversible amyloid formation.

A large group of hormones are stored as amyloid fibrils in acidic secretion vesicles before they are released into the bloodstream and readopt their functional state. Here, we identify an evolutionarily conserved hexapeptide sequence as the major aggregation-prone region (APR) of gastrointestinal peptides of the glucagon family: xFxxWL. We determine nine polymorphic crystal structures of the APR segments of glucagon-like peptides 1 and 2, and exendin and its derivatives. We follow amyloid formation by CD, FTIR, ThT assays, and AFM. We propose that the pH-dependent changes of the protonation states of glutamate/aspartate residues of APRs initiate switching between the amyloid and the folded, monomeric forms of the hormones. We find that pH sensitivity diminishes in the absence of acidic gatekeepers and amyloid formation progresses over a broad pH range. Our results highlight the dual role of short aggregation core motifs in reversible amyloid formation and receptor binding.

Structuring liquids through solvent-assisted interfacial association of oppositely charged polyelectrolytes and amphiphiles.

HYPOTHESIS: Sculpting liquids into different shapes is usually based on the interfacial interactions of functionalized nanoparticles or polymers with specific ligands, leading to exciting material properties due to the combination of the mobility of liquid components with the solid-like characteristic of the arrested liquid/liquid interface. There is an intense interest in novel structured liquids produced from simple compounds with versatile application potentials. Complexes of oppositely charged commercial polyelectrolytes and traditional aliphatic surfactants are good candidates for this goal since they reveal rich structural features and could adsorb at various interfaces. However, they have not been applied yet for structuring liquids. EXPERIMENTS: The interfacial interactions and film formation between aqueous sodium poly(styrene) sulfonate solutions (NaPSS) and hexadecylamine (HDA) solutions in various alkanols were investigated by surface tension measurements and ATR-IR spectroscopy. 3D printing experiments also assessed the robustness of the formed films. FINDINGS: Arrested fatty alcohol/water interfaces were formed due to the interfacial association of NaPSS, HDA, and alkanol molecules, which also act as cosurfactants in the surface region. These solid films enable the synthesis of temperature-sensitive all-in-liquid constructs and offer alternatives to bulk polyion/mixed surfactant assemblies prepared earlier through numerous synthesis steps.

Comparative Study of the Solid-Liquid Interfacial Adsorption of Proteins in Their Native and Amyloid Forms.

The adhesive properties of amyloid fibers are thought to play a crucial role in various negative and positive aggregation processes, the study of which might help in their understanding and control. Amyloids have been prepared from two proteins, lysozyme and ß-lactoglobulin, as well as an Exendin-4 derivative miniprotein (E5). Thermal treatment was applied to form amyloids and their structure was verified by thioflavin T (ThT), 8-Anilino-1-naphthalenesulfonic acid (ANS) dye tests and electronic circular dichroism spectroscopy (ECD). Adsorption properties of the native and amyloid forms of the three proteins were investigated and compared using the mass-sensitive quartz crystal microbalance (QCM) technique. Due to the possible electrostatic and hydrophobic interactions, similar adsorbed amounts were found for the native or amyloid forms, while the structures of the adsorbed layers differed significantly. Native proteins formed smooth and dense adsorption layers. On the contrary, a viscoelastic, highly loose layer was formed in the presence of the amyloid forms, shown by increased motional resistance values determined by the QCM technique and also indicated by atomic force microscopy (AFM) and wettability measurements. The elongated structure and increased hydrophobicity of amyloids might contribute to this kind of aggregation.

Light-Induced and Thermal Isomerization of Azobenzenes on Immobilized Gold Nanoparticle Aggregates.

Morphologically different gold nanoparticle (AuNP) aggregates were prepared on macroscopic surfaces covered with a layer of polydopamine (PDA). The extent of particle aggregation and the particle size distribution could be controlled by the Au(III) reduction times, while the reduction process was triggered solely by the redox active polymer. Shorter reaction times led to smaller particles along with lower levels of aggregation, while longer reductions resulted in larger average particle diameter and heavier aggregation. The prepared surfaces were characterized by UV-Vis, AFM and KPFM techniques. These surfaces were used as solvent-free condensed phases to probe the photochemical and thermal isomerization processes of attached azobenzenes with different spacer lengths. Fast and reversible light-induced switching was observed in each case. The thermal cis-to-trans isomerization was found to be accelerated for particle-bound azobenzenes compared to those in solution.

Host cell targeting of novel antimycobacterial 4-aminosalicylic acid derivatives with tuftsin carrier peptides.

Mycobacterium tuberculosis is an intracellular pathogen and the uptake of the antimycobacterial compounds by host cells is limited. Novel antimycobacterials effective against intracellular bacteria are needed. New N-substituted derivatives of 4-aminosalicylic acid have been designed and evaluated. To achieve intracellular efficacy and selectivity, these compounds were conjugated to tuftsin peptides via oxime or amide bonds. These delivery peptides can target tuftsin- and neuropilin receptor-bearing cells, such as macrophages and various other cells of lung origin. We have demonstrated that the in vitro antimycobacterial activity of the 4-aminosalicylic derivatives against M. tuberculosis H37Rv was preserved in the peptide conjugates. The free drugs were ineffective on infected cells, but the conjugates were active against the intracellular bacteria and have the selectivity on various types of host cells. The intracellular distribution of the carrier peptides was assessed, and the peptides internalize and display mainly in the cytosol in a concentration-dependent manner. The penetration ability of the most promising carrier peptide OT5 was evaluated using Transwell-inserts and spheroids. The pentapeptide exhibited time- and concentration-dependent penetration across the non-contact monolayers. Also, the pentapeptide has a fair penetration rate towards the center of spheroids formed of EBC-1 cells.

Novel Assay Platform to Evaluate Intracellular Killing of Mycobacterium tuberculosis: In Vitro and In Vivo Validation.

One of the main hallmarks of tuberculosis (TB) is the ability of the causative agent to transform into a stage of dormancy and the capability of long persistence in the host phagocytes. It is believed that approximately one-third of the population of the world is latently infected with Mycobacterium tuberculosis (Mtb), and 5%-10% of these individuals can develop clinical manifestations of active TB even decades after the initial infection. In this latent, intracellular form, the bacillus is shielded by an extremely robust cell wall and becomes phenotypically resistant to most antituberculars. Therefore, there is a clear rationale to develop novel compounds or carrier-conjugated constructs of existing drugs that are effective against the intracellular form of the bacilli. In this paper, we describe an experimental road map to define optimal candidates against intracellular Mtb and potential compounds effective in the therapy of latent TB. To validate our approach, isoniazid, a first-line antitubercular drug was employed, which is active against extracellular Mtb in the submicromolar range, but ineffective against the intracellular form of the bacteria. Cationic peptide conjugates of isoniazid were synthesized and employed to study the host-directed drug delivery. To measure the intracellular killing activity of the compounds, Mtb-infected MonoMac-6 human monocytic cells were utilized. We have assessed the antitubercular activity, cytotoxicity, membrane interactions in combination with internalization efficacy, localization, and penetration ability on interface and tissue-mimicking 3D models. Based on these in vitro data, most active compounds were further evaluated in vivo in a murine model of TB. Intraperitoneal infectious route was employed to induce a course of slowly progressive and systemic disease. The well-being of the animals, monitored by the body weight, allows a prolonged experimental setup and provides a great opportunity to test the long-term activity of the drug candidates. Having shown the great potency of this simple and suitable experimental design for antimicrobial research, the proposed novel assay platform could be used in the future to develop further innovative and highly effective antituberculars.

Bacterial fermentation and isotope labelling optimized for amyloidogenic proteins.

We developed a cost sensitive isotope labelling procedure using a fed-batch fermentation method and tested its efficiency producing the 15 N-, 13 C- and 15 N/13 C-labelled variants of an amyloidogenic miniprotein (E5: EEEAVRLYIQWLKEGGPSSGRPPPS). E5 is a surface active protein, which forms amyloids in solution. Here, we confirm, using both PM-IRRAS and AFM measurements, that the air-water interface triggers structural rearrangement and promotes the amyloid formation of E5, and thus it is a suitable test protein to work out efficient isotope labelling schemes even for such difficult sequences. E. coli cells expressing the recombinant, ubiquitin-fused miniprotein were grown in minimal media containing either unlabelled nutrients, or 15 N-NH4 Cl and/or 13 C-D-Glc. The consumption rates of NH4 Cl and D-Glc were quantitatively monitored during fermentation and their ratio was established to be 1:5 (for NH4 Cl: D-Glc). One- and two-step feeding schemes were custom-optimized to enhance isotope incorporation expressing five different E5 miniprotein variants. With the currently optimized protocols we could achieve a 1.5- to 5-fold increase of yields of several miniproteins coupled to a similar magnitude of cost reduction as compared to flask labelling protocols.

Membrane-Based In Situ Mid-Infrared Spectroscopic Ellipsometry: A Study on the Membrane Affinity of Polylactide-co-glycolide Nanoparticulate Systems.

Mid-infrared (IR) ellipsometry of thin films and molecule layers at solid-liquid interfaces has been a challenge because of the absorption of light in water. It has been usually overcome by using configurations utilizing illumination through the solid substrate. However, the access to the solid-liquid interface in a broad spectral range is also challenging due to the limited transparency of most structural materials in the IR wavelength range. In this work, we propose a concept of a microfabricated analysis cell based on an IR-transparent Si membrane with advantages of a robust design, flexible adaptation to existing equipment, small volume, multiple-angle capabilities, broad wavelength range, and opportunities of multilayer applications for adjusted ranges of high sensitivity. The chamber was prepared by 3D micromachining technology utilizing deep reactive ion etching of a silicon-on-insulator wafer and bonded to a polydimethylsiloxane microfluidic injection system resulting in a cell volume of approximately 50 µL. The mechanical stability of the 2 and 5 µm-thick membranes was tested using different "backbone" reinforcement structures. It was proved that the 5 µm-thick membranes are stable at lateral cell sizes of 5 mm by 20 mm. The cell provides good intensity and adjustment capabilities on the stage of a commercial mid-IR ellipsometer. The membrane configuration also provides optical access to the sensing interfaces at a broad range of incident angles, which is a significant advantage in many potential sensing structure configurations, such as plasmonic, multilayer, 2D, or metamaterial applications.

Chemical structure and in vitro cellular uptake of luminescent carbon quantum dots prepared by solvothermal and microwave assisted techniques.

Carbon quantum dots (CQDs) are a novel family of fluorescent materials that could be employed as non-toxic alternatives to molecular fluorescent dyes in biological research and also in medicine. Four different preparation approaches, including microwave assisted heating and solvent refluxing, were explored. In addition to the widely used microwave assisted methods, a simple convenient new procedure is presented here for the particle synthesis. A detailed X-ray photoelectron spectroscopic (XPS) analysis was employed to characterize the composition, and more importantly, the chemical structure of the CQD samples and the interrelation of the characteristic surface chemical groups with the fluorescence properties and with surface polarity was unambiguously established. In vitro cellular internalization experiments documented their applicability as fluorescence labels while non-toxic properties were also approved. It was demonstrated that the adequate water-dispersibility of the particles plays a crucial role in their biological application. The synthetized CQD samples turned to be promising for cellular imaging applications both in laser illuminated flow cytometric measurements and in fluorescence microscopy.

Membrane affinity and fluorescent labelling: comparative study of monolayer interaction, cellular uptake and cytotoxicity profile of carboxyfluorescein-conjugated cationic peptides.

Fluorescent labelling is a common approach to reveal the molecular details of cellular uptake, internalisation, transport, distribution processes in biological systems. The conjugation with a fluorescent moiety might affect relevant physico-chemical and in vitro transport properties of the bioactive component. A representative set of seven cationic peptides-including cell-penetrating peptides as well as antimicrobial peptides and synthetic derivatives-was selected for our comparative study. Membrane affinity of the peptides and their 5(6)-carboxyfluorescein (Cf) derivatives was determined quantitatively and compared applying Langmuir monolayer of zwitterionic (DPPC) and negatively charged (DPPC + DPPG) lipids as cell membrane models. The interaction with neutral lipid layer is mainly governed by the overall hydrophobicity of the molecule which is remarkably increased by Cf-conjugation for the most hydrophobic Magainin, Melittin and Transportan. A significantly enhanced membrane affinity was detected in negatively charged lipid model monolayer for all of the peptides since the combination of electrostatic and hydrophobic interaction is active in that case. The Cf-conjugation improved the penetration ability of Penetratin and Dhvar4 suggesting that both the highly charged character (Z/n) and the increased hydrophobicity by Cf-conjugation present important contribution to membrane interaction. This effect might also responsible for the observed high in vitro internalisation rate of Penetratin and Dhvar4, while according to in vitro studies they did not cause damage of cell membrane. From the experiments with the given seven cationic peptides, it can be concluded that the Cf-conjugation alters the degree of membrane interaction of such peptides which are moderately hydrophobic and highly charged.

Surface Layer Modification of Poly(d,l-lactic- co-glycolic acid) Nanoparticles with Targeting Peptide: A Convenient Synthetic Route for Pluronic F127-Tuftsin Conjugate.

Nanoparticles consisting of biodegradable poly(d,l-lactic- co-glycolic acid) (PLGA) are promising carriers for drug molecules to improve the treatment of tuberculosis. Surface modifiers, such as Pluronic F127, are essential for biocompatibility and for the protection against particle aggregation. This study demonstrates a successful approach to conjugate Pluronic F127 coated PLGA nanoparticles with Tuftsin, which has been reported as a macrophage-targeting peptide. Transformation of Pluronic F127 hydroxyl groups-which have limited reactivity-into aldehyde groups provide a convenient way to bind aminooxy-peptide derivatives in a one-step reaction. We have also investigated that this change has no effect on the physicochemical properties of the nanoparticles. Our data showed that coating nanoparticles with Pluronic-Tuftsin conjugate markedly increased the internalization rate and the intracellular activity of the encapsulated drug candidate against Mycobacterium tuberculosis. By employing this approach, a large variety of peptide targeted PLGA nanoparticles can be designed for drug delivery.

Affinity Purification and Comparative Biosensor Analysis of Citrulline-Peptide-Specific Antibodies in Rheumatoid Arthritis.

BACKGROUND: In rheumatoid arthritis (RA), anti-citrullinated protein/peptide antibodies (ACPAs) are responsible for disease onset and progression, however, our knowledge is limited on ligand binding affinities of autoantibodies with different citrulline-peptide specificity. METHODS: Citrulline-peptide-specific ACPA IgGs were affinity purified and tested by ELISA. Binding affinities of ACPA IgGs and serum antibodies were compared by surface plasmon resonance (SPR) analysis. Bifunctional nanoparticles harboring a multi-epitope citrulline-peptide and a complement-activating peptide were used to induce selective depletion of ACPA-producing B cells. RESULTS: KD values of affinity-purified ACPA IgGs varied between 10-6 and 10-8 M and inversely correlated with disease activity. Based on their cross-reaction with citrulline-peptides, we designed a novel multi-epitope peptide, containing Cit-Gly and Ala-Cit motifs in two-two copies, separated with a short, neutral spacer. This peptide detected antibodies in RA sera with 66% sensitivity and 98% specificity in ELISA and was recognized by 90% of RA sera, while none of the healthy samples in SPR. When coupled to nanoparticles, the multi-epitope peptide specifically targeted and depleted ACPA-producing B cells ex vivo. CONCLUSIONS: The unique multi-epitope peptide designed based on ACPA cross-reactivity might be suitable to develop better diagnostics and novel therapies for RA.

Interaction of poly(lactic-co-glycolic acid) nanoparticles at fluid interfaces.

HYPOTHESIS: Adsorption and localization of nanoparticles at fluid interfaces are key factors in processes like transport through membranes or emulsion stabilization. Adsorption of poly(lactic-co-glycolic acid) (PLGA) and Pluronic coated PLGA nanoparticles (NPs) were studied at three different fluid interfaces. The effect of particle surface modification and type of interface was investigated with the aim of fine tuning interfacial interaction of the nanoparticles. EXPERIMENTS: Surface tension measurements were carried out to determine the surface activity and adsorption kinetics of the particles. Particles layers at the air/water interface were further studied using the Langmuir balance technique by recording the surface pressure-area isotherms. Interfacial rheological measurements were performed to characterize the structural properties of the nanoparticle interfacial films. FINDINGS: Interfacial adsorption and its kinetics were explained by the diffusion controlled adsorption theory and considering the energy barrier of particle transport to the interface. Surface modification by Pluronic increased the interfacial activity of nanoparticles at all interfaces. Surface activity of PLGA-Pluronic particles could be described by the contributions of both the PLGA NPs and the effective portion of their Pluronic shell. Both particle films present mainly elastic dilatational properties suggesting that particles are in kinetically separated state.

In vitro eradication of citrullinated protein specific B-lymphocytes of rheumatoid arthritis patients by targeted bifunctional nanoparticles.

BACKGROUND: Autoreactive B cells are crucial players in the pathogenesis of rheumatoid arthritis (RA). Autoantibodies specific for citrullinated proteins (ACPA), present in the serum of approximately 60-70 % of patients, have a pathogenic role in the disease. B cell depleting therapies may result in a transient immunosuppression, increasing the risk of infections. Our aim was to develop a new therapeutic approach to selectively deplete the ACPA producing autoreactive B cells. METHODS: To target B cells synthetic citrullinated peptide derived from the ß chain of fibrin, ß60-74Cit 60,72,74 (ß60-74Cit), the predominant epitope recognized by ACPA was used. Complement dependent cytotoxicity (CDC) was induced by a modified peptide derived from gp120 of HIV-1. To trigger CDC both the targeting peptide and the complement activating peptide were covalently coupled in multiple copies to the surface of poly (DL-lactic-co-glycolic acid) nanoparticles (NPs). Ex vivo antibody synthesis was examined by ELISA and ELISpot. CDC was tested after dead cell staining by flow cytometry. RESULTS: The ß60-74Cit peptide was selectively recognized by a small subset of B cells from RA patients having high level of peptide specific serum antibody, suggesting that the peptide can target diseased B cells. The modified gp120 peptide covalently coupled to NPs induced the formation of the complement membrane attack complex, C5b-9 in human serum. We show here for the first time that bifunctional NPs coupled to multiple copies of both the targeting peptide and the complement activating effector peptide on their surface significantly reduce ß60-74Cit peptide specific ex vivo ACPA production, by inducing complement dependent lysis of the citrullinated peptide specific B cells of seropositive RA patients. CONCLUSIONS: Bifunctional NPs covalently coupled to autoantigen epitope peptide and to a lytic peptide activating complement may specifically target and deplete the peptide specific autoreactive B-cells.

Nanoparticle encapsulated lipopeptide conjugate of antitubercular drug isoniazid: in vitro intracellular activity and in vivo efficacy in a Guinea pig model of tuberculosis.

Considering that Mycobacterium tuberculosis (Mtb) can survive in host phagocytes for decades and currently applied drugs are largely ineffective in killing intracellular Mtb, novel targeted delivery approaches to improve tuberculosis chemotherapy are urgently needed. In order to enhance the efficacy of a clinically used antitubercular agent (isoniazid, INH) a novel lipopeptide carrier was designed based on the sequence of tuftsin, which has been reported as a macrophage-targeting molecule. The conjugate showed relevant in vitro activity on Mtb H37Rv culture with low cytotoxicity and hemolytic activity on human cells. The conjugate directly killed intracellular Mtb and shows much greater efficacy than free INH. To improve bioavailability, the conjugate was encapsulated into poly(lactide-co-glycolide) (PLGA) nanoparticles and tested in vivo in a guinea pig infection model. External clinical signs, detectable mycobacterial colonies in the organs, and the histopathological findings substantiate the potent chemotherapeutic effect of orally administered conjugate-loaded nanoparticles.

Membrane affinity and antibacterial properties of cationic polyelectrolytes with different hydrophobicity.

The antibacterial behavior of cationic polyelectrolytes is studied using model membrane experiments and in vitro bacterial investigations. The molecular interaction with lipid films is evaluated by the degree of penetration of the polymers into Langmuir monolayers of neutral or negatively charged lipids. The polymer/lipid interaction results in structural changes of the penetrated lipid layer visualized using AFM. The polymers are found to be effective in inhibiting the proliferation of E. coli, B. subtilis and S. aureus. The influence of the chemical structure on the functional behavior is related to the conformational properties. An optimum structure is identified on the basis of antibacterial and hemolytic tests as well as membrane-destroying efficacy of the antimicrobial polymers.