RESUMO
The development of functional artificial photosynthetic devices relies on the understanding of mechanistic aspects involved in specialized photocatalysts. Modified iron porphyrins have long been explored as efficient catalysts for the light-induced reduction of carbon dioxide (CO2) towards solar fuels. In spite of the advancements in homogeneous catalysis, the development of the next generation of catalysts requires a complete understanding of the fundamental photoinduced processes taking place prior to and after activation of the substrate by the catalyst. In this work, we employ a state-of-the-art nanosecond optical transient absorption spectroscopic setup with a double excitation capability to induce charge accumulation and trigger the reduction of CO2 to carbon monoxide (CO). Our biomimetic system is composed of a urea-modified iron(III) tetraphenylporphyrin (UrFeIII) catalyst, the prototypical [Ru(bpy)3]2+ (bpy=2,2'-bipyridine) used as a photosensitizer, and sodium ascorbate as an electron donor. Under inert atmosphere, we show that two electrons can be successively accumulated on the catalyst as the fates of the photogenerated UrFeII and UrFeI reduced species are tracked. In the presence of CO2, the catalytic cycle is kick-started providing further evidence on CO2 activation by the UrFe catalyst in its formal FeI oxidation state.
RESUMO
Two BODIPY-C60-peptide assemblies were synthesized by CuAAC reactions of BODIPY-C60 dyads and a helical peptide functionalized with a terminal alkyne group and an azide group, respectively. The helical peptide within these assemblies was functionalized at its other end by a disulfide group, allowing formation of self-assembled monolayers (SAMs) on gold surfaces. Characterizations of these SAMs, as well as those of reference molecules (BODIPY-C60-alkyl, C60-peptide and BODIPY-peptide), were carried out by PM-IRRAS and cyclic voltammetry. BODIPY-C60-peptide SAMs are more densely packed than BODIPY-C60-alkyl and BODIPY-peptide based SAMs. These findings were attributed to the rigid peptide helical conformation along with peptide-peptide and C60-C60 interactions within the monolayers. However, less dense monolayers were obtained with the target assemblies compared to the C60-peptide, as the BODIPY entity likely disrupts organization within the monolayers. Finally, electron transfer kinetics measurements by ultra-fast electrochemistry experiments demonstrated that the helical peptide is a better electron mediator in comparison to alkyl chains. This property was exploited along with those of the BODIPY-C60 dyads in a photo-current generation experiment by converting the resulting excited and/or charge separated states from photo-illumination of the dyad into electrical energy.
RESUMO
Merging the rich chemistry of Ce(IV) polyoxometalates (POMs) with that of 3d polyanions remains a challenge due to the strong competition between these highly oxophilic lanthanide cations and 3d metallic ions for coordination to lacunary molecular metal oxides. We report herein the characterization of an unprecedented water stable hexameric CeIV/CoII POM (Ce12Co6) made of two {(SiW9)2Ce6} units connected to a {(SiW10)2Co6(PO4)2} core. In addition, the pentameric CeIV/NiII compound Ce6Ni8, where two {PW9Ni3W} and a {PW10Ni2} fragments are grafted on a {(PW9)2Ce6} moiety, has been obtained. Magnetic studies of Ce6Ni8 revealed ferromagnetic interactions between the NiII centers constituting the {Ni3PW10} fragments, in agreement with the geometry of such a trinuclear cluster. Related insoluble barium salts of Ce12Co6 and Ce6Ni8 were also prepared, allowing their solid-state electrochemical investigations and showing in particular that in Ce12Co6, both the cobalt, cerium, and silicotungstate moieties are electroactive. Finally, photophysical studies demonstrate the formation of long-lived reduced POMs photosensitized by [Ru(bpy)3]2+, suggesting that Ce12Co6 and Ce6Ni8 could be used as efficient reservoirs of reduction equivalents for photocatalytic reactions.
RESUMO
Evidence for photoinduced intermolecular electron transfer from the excited state of the [Mo6I8Cl6]2- electron-rich cluster to polyoxometalates (POMs) is reported. We demonstrate that the global charge density of POMs affects the efficiency of electron transfer. This work paves the way for the rational design of photocatalytic systems using cluster-based complexes as robust noble-metal-free photosensitizers.
RESUMO
Light-induced charge accumulation is at the heart of biomimetic systems aiming at solar fuel production in the realm of artificial photosynthesis. Understanding the mechanisms upon which these processes operate is a necessary condition to drive down the rational catalyst design road. We have built a nanosecond pump-pump-probe resonance Raman setup to witness the sequential charge accumulation process while probing vibrational features of different charge-separated states. By employing a reversible model system featuring methyl viologen (MV) as a dual electron acceptor, we have been able to watch the photosensitized production of its neutral form, MV0, resulting from two sequential electron transfer reactions. We have found that, upon double excitation, a fingerprint vibrational mode corresponding to the doubly reduced species appears at 992 cm-1 and peaks at 30 µs after the second excitation. This has been further confirmed by simulated resonance Raman spectra which fully support our experimental findings in this unprecedented buildup of charge seen by a resonance Raman probe.
RESUMO
With a direct band gap, superior charge carrier mobility, and uniformly distributed pores, graphdiyne (GDY) has stimulated tremendous interest from the scientific community. However, its broad application is greatly limited by the complicated multistep synthesis process including complex deprotection of hexakis-[(trimethylsilyl)ethynyl]benzene (HEB-TMS) and peeling of GDY from the substrates. Here, we describe a deprotection-free strategy to prepare GDY powder by directly using HEB-TMS as the monomer. When CuCl was used as the catalysts in DMF solvent, the yield of GDY powder reached ≈100 %. More interestingly, uniformly dispersed CuO nanoparticles with an average diameter of ≈2.9â nm were in situ formed on GDY after the reaction. The prepared CuO/GDY was demonstrated an excellent co-catalyst for photocatalytic hydrogen evolution, comparable to the state-of-art Pt co-catalyst. The deprotection-free approach will widen the use of GDY and facilitate its scaling up to industrial level.
RESUMO
Photophysical studies on a BODIPY-fullerene-distyryl BODIPY triad (BDP-C60-DSBDP) and its reference dyads (BODIPY-fullerene; BDP-C60 and distyryl BODIPY-fullerene; DSBDP-C60) are presented herein. In the triad, the association of the two chromophore units linked by a fullerene moiety leads to strong near UV-Visible light absorption from 300 to 700 nm. The triplet-excited state was observed upon visible excitation in all these assemblies, and shown to be localized on the C60 or BODIPY moieties. Using quantitative nanosecond transient absorption, we provide a complete investigation on the lifetime and formation quantum yield of the triplet-excited state. In the BDP-C60 dyad, the triplet excited state of C60 (τ = 7 ± 1 µs) was obtained with a quantum yield of 40 ± 8%. For the DSBDP-C60 dyad and BDP-C60-DSBDP triad, a longer-lived triplet excited state with a lifetime of around 250 ± 20 µs centered on the DSBDP moiety was formed, with respective quantum yields of 37 ± 8 and 20 ± 4%. Triplet-triplet annihilation up-conversion is characterized in the BDP-C60 dyad and the bichromophoric triad in the presence of perylene and DSBDP-monomer as respective annihilators. The photo-induced formation of a long-lived 3DSBDP* in the triad coupled with panchromatic light absorption offers potential applications as a heavy-atom-free organic triplet photosensitizer.
Assuntos
Fulerenos , Compostos de Boro/química , Fulerenos/química , Fármacos Fotossensibilizantes/químicaRESUMO
Iron porphyrins are among the best molecular catalysts for the electrocatalytic CO2 reduction reaction. Powering these catalysts with the help of photosensitizers comes along with a couple of unsolved challenges that need to be addressed with much vigor. We have designed an iron porphyrin catalyst decorated with urea functions (UrFe) acting as a multipoint hydrogen bonding scaffold towards the CO2 substrate. We found a spectacular photocatalytic activity reaching unreported TONs and TOFs as high as 7270 and 3720â h-1 , respectively. While the Fe0 redox state has been widely accepted as the catalytically active species, we show here that the FeI species is already involved in the CO2 activation, which represents the rate-determining step in the photocatalytic cycle. The urea functions help to dock the CO2 upon photocatalysis. DFT calculations bring support to our experimental findings that constitute a new paradigm in the catalytic reduction of CO2 .
RESUMO
Polyoxothiometalate ions (ThioPOM) are active hydrogen-evolution reaction (HER) catalysts based on modular assembly built from electrophilic clusters {MoSx } and vacant polyoxotungstates. Herein, the dumbbell-like anion [{(PW11 O39 )Mo3 S4 (H2 O)3 (OH)}2 ]8- exhibits very high light-driven HER activity, while the active cores {Mo3 S4 } do not contain any exposed disulfido ligands, which were suspected to be the origin of the HER activity. Moreover, in the catalyst architecture, the two central {Mo3 S4 } cores are sandwiched by two {PW11 O39 }7- subunits that act as oxidant-resistant protecting groups and behave as electron-collecting units. A detailed photophysical study was carried out confirming the reductive quenching mechanism of the photosensitizer [Ir(ppy)2 (dtbbpy)]+ by the sacrificial donor triethanolamine (TEOA) and highlighting the very high rate constant of the electron transfer from the reduced photosensitizer to the ThioPOM catalyst. Such results provide new insights into the field of molecular catalytic systems able to promote high HER activity.
RESUMO
A new donor-acceptor dyad composed of a BODIPY (4,4'-difluoro-4-bora-3a,4a-diaza-s-indacene) donor and a fullerene C60 acceptor has been synthesized and characterized. This derivative has been prepared using a clickable fullerene building block that bears an alkyne moiety and a maleimide unit. The post-functionalization of the maleimide group by a BODIPY thiol leads to a BODIPY-C60 dyad, leaving the alkyne moiety for further functional arrangement. On the basis of the combination of semi-empirical and density functional theory (DFT) calculations, spectroelectrochemical experiments, and steady-state and time-resolved spectroscopies, the photophysical properties of this new BODIPY-C60 dyad were thoroughly studied. By using semi-empirical calculations, the equilibrium of three conformations of the BODIPY-C60 dyad has been deduced, and their molecular orbital structures have been analyzed using DFT calculations. Two short fluorescence lifetimes were attributed to two extended conformers displaying variable donor-acceptor distances (17.5 and 20.0 Å). Additionally, the driving force for photoinduced electron transfer from the singlet excited state of BODIPY to the C60 moiety was calculated using redox potentials determined with electrochemical studies. Spectroelectrochemical measurements were also carried out to investigate the absorption profiles of radicals in the BODIPY-C60 dyad in order to assign the transient species in pump-probe experiments. Under selective photoexcitation of the BODIPY moiety, occurrences of both energy and electron transfers were demonstrated for the dyad by femtosecond and nanosecond transient absorption spectroscopies. Photoinduced electron transfer occurs in the folded conformer, while energy transfer is observed in extended conformers.
RESUMO
The Keggin-type polyoxometalate (POM) PW12O403- and the catalytic complex Cp*Rh(bpydc)Cl2 (bpydc = 2,2'-bipyridine-5,5'-dicarboxylic acid) were coimmobilized in the Zr(IV) based metal organic framework UiO-67. The POM is encapsulated within the cavities of the MOF by in situ synthesis, and then, the Rh catalytic complex is introduced by postsynthetic linker exchange. Infrared and Raman spectroscopies, 31P and 13C MAS NMR, N2 adsorption isotherms, and X-ray diffraction indicate the structural integrity of all components (POM, Rh-complex and MOF) within the composite of interest (PW12,Cp*Rh)@UiO-67. DFT calculations identified two possible locations of the POM in the octahedral cavities of the MOF: one at the center of a UiO-67 pore with the Cp*Rh complex pointing toward an empty pore and one off-centered with the Cp*Rh pointing toward the POM. 31P-1H heteronuclear (HETCOR) experiments ascertained the two environments of the POM, equally distributed, with the POM in interaction either with the Cp* fragment or with the organic linker. In addition, Pair Distribution Function (PDF) data were collected on the POM@MOF composite and provided key evidence of the structural integrity of the POM once immobilized into the MOF. The photocatalytic activity of the (PW12,Cp*Rh)@UiO-67 composite for CO2 reduction into formate and hydrogen were evaluated. The formate production was doubled when compared with that observed with the POM-free Cp*Rh@UiO-67 catalyst and reached TONs as high as 175 when prepared as thin films, showing the beneficial influence of the POM. Finally, the stability of the composite was assessed by means of recyclability tests. The combination of XRD, IR, ICP, and PDF experiments was essential in confirming the integrity of the POM, the catalyst, and the MOF after catalysis.
RESUMO
We report the first time-resolved resonant Raman (TR3) spectra of photoinduced charge transfer from [Ru(bpy)3]2+ to methyl viologen, with observations of vibrational structure. The presence of singly charged methyl viologen in solution is noted by the appearance of several spectroscopic lines, which are visible in the spectra following subtraction of reagent molecules. Assignments are confirmed using both density functional theory (DFT) calculations and literature values and are shown to be consistent with transient absorption spectroscopy data. This presents proof-of-concept for the application of TR3 in mechanistic studies of photocatalytic systems.
RESUMO
P2W18Co4@MOF-545, which contains the sandwich-type polyoxometalate (POM) [(PW9O34)2Co4(H2O)2]10- (P2W18Co4) immobilized in the porphyrinic metal-organic framework (MOF), MOF-545, is a "three-in-one" (porosity + light capture + catalysis) heterogeneous photosystem for the oxygen-evolution reaction (OER). Thin films of this composite were synthesized on transparent and conductive indium tin oxide (ITO) supports using electrophoretic (EP) or drop-casting (DC) methods, thus providing easy-to-use devices. Their electro- and photocatalytic activities for OER were investigated. Remarkably, both types of films exhibit higher turnover numbers (TONs) than the original bulk material previously studied as a suspension for the photocatalytic OER, with TONs after 2 h equal to 1600 and 403 for DC and EP films, respectively, compared to 70 for the suspension. This difference of catalytic activities is related to the proportion of efficiently illuminated crystallites, whereby a DC thin film offers the largest proportion of POM@MOF crystallites exposed to light due to its lower thickness when compared to an EP film or crystals in suspension. Such devices can be easily recycled by simply removing them from the reaction medium and washing them before reuse. The films were fully characterized with extended X-ray absorption fine structure (EXAFS) and X-ray absorption near edge structure (XANES) spectroscopies, Raman, scanning electron microscopy, and electrochemistry before and after catalysis. The combination of all of these techniques shows the stability of both the POM and the MOF within the composite upon water-oxidation reaction.
RESUMO
A unique polyoxometalate complex made up of a tetradecanuclear nickel bisphosphonate cluster capping a {SiW9} unit has been characterized. This stable compound exhibits a high hydrogen evolution reaction photocatalytic activity under visible light irradiation via a reductive quenching mechanism.
RESUMO
Methylviologen (MV2+) is perhaps the most used component as a reversible electron acceptor in photophysical studies. While MV2+ is most commonly implicated as a reversible one-electron mediator, its electrochemical properties clearly evidence two successive one-electron reduction processes. In this report, we have investigated on the light driven two-charge accumulation on MV2+ using a multicomponent system composed of the prototypical molecular photosensitizer [Ru(bpy)3]2+ and MV2+ in the presence of ascorbate as reversible electron donor. The sequential addition of two electrons on the methylviologen was tracked upon sequential excitation of the [Ru(bpy)3]2+ at optimized concentration of the electron acceptor. The charge accumulated state carries an energy of 0.9 eV above the ground state and has a lifetime of ca. 50 µs. We have reached a fairly good global yield of approximately 9% for the two-charge accumulation. This result clearly demonstrates the potential of this simple approach for applications in artificial photosynthesis.
RESUMO
Biomimetic models that contain elements of photosynthesis are fundamental in the development of synthetic systems that can use sunlight to produce fuel. The critical task consists of running several rounds of light-induced charge separation, which is required to accumulate enough redox equivalents at the catalytic sites for the target chemistry to occur. Long-lived first charge-separated state and distinct electronic signatures for the sequential charge accumulated species are essential features to be able to track these events on a spectroscopic ground. Herein, we use a double-excitation nanosecond pump-pump-probe experiment to interrogate two successive rounds of photo-induced electron transfer on a molecular dyad containing a naphthalene diimide (NDI) linked to a [Ru(bpy)3 ]2+ (bpy=bipyridine) chromophore by using a reversible electron donor. We report an unprecedented long-lived two-electron charge accumulation (t=200â µs).
RESUMO
The development of highly selective sensors for potassium is of great interest in biology. Two new hydrosoluble potassium sensors (Calix-COU-Alkyne and Calix-COU-Am) based on a calix[4]arene bis(crown-6) and an extended coumarin were synthesized and characterized. The photophysical properties and complexation studies of these compounds have been investigated and show high molar extinction coefficients and high fluorescence quantum yields. Upon complexation with potassium in the millimolar concentration range, an increase of one- and two-photon fluorescence emission is detected. A twofold fluorescence enhancement is observed upon excitation at λ=405â nm. The ligands present excellent selectivity for potassium in the presence of various competitive cations in water and in a physiological medium. The photophysical properties are not affected by the presence of a large amount of competing cations (Na+ , Ca2+ , Mg2+ , etc.). Ex vivo measurements on mouse hippocampal slices show that Calix-COU-Alkyne accumulates extracellularly and does not alter the neuronal activity. Furthermore, the sensor can be utilized to monitor slow extracellular K+ increase induced by inhibition of K+ entry into the cells.
Assuntos
Calixarenos/química , Cátions/química , Potássio/química , Animais , Fluorescência , Ligantes , Camundongos , Estrutura Molecular , FótonsRESUMO
In this article we present a joint study by time-of-flight mass spectroscopy and density functional theory of cobalt protoporphyrin dimer complexes. The main novelty of the experimental part is to reveal the formation of porphyrin dimers that eventually include a chlorine atom. Density functional theory calculations have been performed to shed light on the structural and electronic properties of monomers and dimers that may be formed experimentally. Various geometries of the monomers are analyzed in the two lowest spin states. The electronic structures are examined by means of population analysis relying on the iterative Hirshfeld scheme and the topological analyses of the electron localization function. It is shown that the cobalt ligand bond is purely ionic in the triplet states but shows a noticeable covalent character in the singlet state. Ionization potential of Co-protoporphyrin and binding energies of the chlorine ligand are also reported. Concerning the dimers, several association patterns are investigated for the chlorinated and non-chlorinated complexes. It is found that the structures of the most stable complexes involve four hydrogen bonds between the carboxylic acid moieties of the protoporphyrins. However other association modes are likely to be possible in the experiments.
RESUMO
New fluorescent molecular sensors based on a calix[4]arene biscrown-6 ether as coordination site and BODIPY derivative as signaling unit were synthesized, and their photophysical properties were characterized. The complexation properties of these sensors with potassium and cesium cations were investigated using both steady-state and time-resolved fluorescence methods. The studies show that the sensitivity with cations depends upon the position of substituted coordination site on the BODIPY core. The complexation with cations does not have much effect on the absorption and emission wavelength when the coordination site (calix[4]arene biscrown-6 ether) is introduced at the meso position of the BODIPY core. In contrast, the same calix[4]arene biscrown-6 ether attached via a styryl linker to the α-position of BODIPY core leads to a sensitive sensor for alkali cations thanks to the better conjugation between the coordination site and the BODIPY core. The complexation of cations induces a hypsochromic shift of the absorption and emission maximums due to the diminution of donor character of the oxygen atoms in the coordination site. The stability constants of complexes with potassium and cesium ion were measured.
RESUMO
Hemoprotein mimics, cobalt picket fence porphyrins have been prepared in the gas phase as neutral molecules for the first time. Their ligation properties have been studied with 1-methylimidazole and compared with those of other cobalt porphyrins, tetraphenyl porphyrin, and cobalt protoporphyrin IX chloride, in view of studying the sterical properties of the ligation. It is shown that the cobalt picket fence porphyrin can only accept one 1-methylimidazole ligand in contrast to less sterically crowded porphyrins like cobalt tetraphenylporphyrin that present two accessible ligation sites. The femtosecond dynamics of these ligated systems have been studied after excitation at 400 nm, in comparison with the unligated ones. The observed transients are formed in much shorter times, 30 fs for the ligated species, as compared to free species (100 fs), supporting the porphyrin to metal charge transfer nature of these transients. The similar decays of the ligated transients <1 ps reveal the absence of photodissociation of the cobalt-1-methylimidazole bond at this step of evolution.