Giant electron-mediated phononic nonlinearity in semiconductor-piezoelectric heterostructures.

Efficient and deterministic nonlinear phononic interactions could revolutionize classical and quantum information processing at radio frequencies in much the same way that nonlinear photonic interactions have at optical frequencies. Here we show that in the important class of phononic materials that are piezoelectric, deterministic nonlinear phononic interactions can be enhanced by orders of magnitude via the heterogeneous integration of high-mobility semiconductor materials. To this end, a lithium niobate and indium gallium arsenide heterostructure is utilized to produce the most efficient three- and four-wave phononic mixing to date, to the best of our knowledge. We then show that the conversion efficiency can be further enhanced by applying semiconductor bias fields that amplify the phonons. We present a theoretical model that accurately predicts the three-wave mixing efficiencies in this work and extrapolate that these nonlinearities can be enhanced far beyond what is demonstrated here by confining phonons to smaller dimensions in waveguides and optimizing the semiconductor material properties.

Rotator Cuff Tendinopathy: Pathways of Apoptosis.

Rotator cuff repair is usually successful, but retear is not uncommon. It has been previously identified that there is a higher incidence of apoptosis in the edges of the torn supraspinatus tendon. A prospective cohort study was conducted with 28 patients-14 rotator cuff tear patients, 5 instability patients, and 9 Anterior cruciate ligament reconstruction patients to determine whether there was any increase in several genes implicated in apoptosis, including Fas receptor (FasR), Fas ligand, Aifm-1, Bcl-2, Fadd, Bax, and caspase-3. There was a significant expression of Bax (P=0.2) and FasR (P=0.005) in the edges of torn supraspinatus tendons, and in intact subscapularis tendons, there was a significant expression of caspase-3 (P=0.02) compared with samples from the torn supraspinatus tendon (P=0.04). The cytochrome c pathway, with its subsequent activation of caspase-3, as well as the TRAIL-receptor signaling pathway involving FasR have both been implicated. The elevated expression of Bax supported the model that the Bax to Bcl-2 expression ratio represents a cell death switch. The elevated expression of Bax in the intact subscapularis tissue from rotator cuff tear patients also may confirm that tendinopathy is an ongoing molecular process.

The Fate of the Shoulder Post Rotator Cuff Repair: Biomechanical Properties of the Supraspinatus Tendon and Surrounding Structures.

The study aimed to describe the changes in biomechanical properties of the supraspinatus tendon, deltoid muscle, and humeral head post arthroscopic rotator cuff repair using shear wave elastography. Shear wave velocity of the tendon, deltoid, and humeral head of 48 patients was measured at predetermined sites at 1 week, 6 weeks, 12 weeks, 6 months, and 12 months post repair. One-way ANOVA with Tukey's correction and Spearman's correlation were performed. Mean±SEM healing tendon stiffness, adjacent to tendon footprint, increased from 1 week (6.2±0.2 m/s) to 6 months (7.5±0.3 m/s) and 12 months (7.8±0.3 m/s) (P<0.001). Mean±SEM deltoid muscle stiffness was higher at 12 months (4.1±0.2 m/s) compared to 1 week (3.4±0.1 m/s) and 12 weeks (3.5±0.1 m/s) (P<0.05). Humeral head stiffness did not change. Following arthroscopic rotator cuff repair, supraspinatus tendon stiffness increased in a curvilinear fashion over 6 months. From 6 months, deltoid muscle stiffness increased, corresponding to when patients were instructed to return to normal activities.

The application of shear wave elastography with ultrasound for rotator cuff tears: a systematic review.

Background: Shear wave elastography (SWE) is an emerging ultrasound-based technology that provides a quantitative assessment of musculoskeletal tissue integrity. This systematic review investigates the use of SWE in the evaluation of rotator cuff tears. Methods: PubMed, Embase, Web of Science, Google Scholar, and the Cochrane Library databases were searched for relevant studies from 1901 up to June 2022. Articles utilizing SWE in rotator cuff tears were selected based on inclusion and exclusion criteria. The studies included involved the assessment of shear wave velocity, tendon thickness and stiffness after healing, and fatty infiltrates evaluation using SWE. The Newcastle-Ottawa Scale was used to evaluate the risk of bias in included observational studies. Double-sided P value < .05 was considered statistically significant. Results: Sixteen studies comprising 520 patients were included in the systematic review. SWE demonstrated that shear wave velocities in torn supraspinatus tendons were lower than in healthy supraspinatus tendons. A decrease in tendon SWE modulus elasticity was observed in tendinopathic tendons. Shear wave velocity decreased with increasing fat content and muscle atrophy. The velocity of SWE in muscle in re-tear groups was greater than in the healed group at 1 month after surgery (P < .05). Conclusion: SWE ultrasound of the supraspinatus tendon can be a useful diagnostic tool for orthopedic surgeons that provide quantitative information on tendinopathic stiffness, velocity, fatty infiltrate, and elasticity characteristics. Decreased tendon velocity of SWE may predict recurrent rotator cuff tears and be useful in postoperative evaluations for muscle healing to plan for future management.

Revision Rotator Cuff Repair With Versus Without an Arthroscopically Inserted Onlay Bioinductive Implant in Workers' Compensation Patients.

Background: The addition of onlay biological grafts to augment difficult rotator cuff repairs has shown encouraging results in a case series. Purpose/Hypothesis: The purpose of this study was to determine whether the addition of an onlay bioinductive implant would improve repair integrity, shear wave elastographic appearance of the repaired tendon and patch, and patient-rated and/or surgeon-measured shoulder function when used in workers' compensation patients undergoing revision arthroscopic rotator cuff repair. We hypothesized that the addition of the bioinductive implant would enhance repair integrity and clinical outcomes compared with standard repair. Study Design: Cohort study; Level of evidence, 3. Methods: A post hoc matched-cohort study was conducted on prospectively recruited workers' compensation patients who received a bioinductive implant for revision rotator cuff repair (n = 19). The control group was selected from consecutive workers' compensation revision rotator cuff repair patients before the introduction of bioinductive implants. Then, they were matched for age and tear size (n = 32). Kaplan-Meier curves were generated to compare the primary outcome of repair integrity between groups. The secondary outcomes were to evaluate the elastographic appearance of the tendon and patch in the bioinductive implant group and to compare patient-rated and surgeon-measured shoulder function between groups preoperatively and at 1 week, 6 weeks, 3 months, and 6 months postoperatively. Results: No major complications associated with the bioinductive implants were identified. Six months after the revision rotator cuff repair, the retear rate in the bioinductive implant group was 16% (3/19), compared with 19% (6/32) in the age- and tear size-matched control group (P = .458). At the final follow-up, the retear rate in the bioinductive implant group was 47% (9/19) at a mean of 14 months compared with 38% (12/32) at a mean of 29 months in the control group (P = .489). The shear wave elastographic stiffness of repaired tendons augmented with the bioinductive implant remained unchanged at 6 m/s from 1 week to 6 months postoperatively, which is lower than the stiffness of 10 m/s in healthy tendons. There were no significant differences in patient-rated or surgeon-measured outcomes between groups 6 months postoperatively. Conclusion: There were no differences in repair integrity or clinical outcomes between workers' compensation patients who underwent revision arthroscopic rotator cuff repair with an onlay bioinductive implant compared to those who underwent standard revision rotator cuff repair.

Man vs. machine: surgeon vs. elastography assessment of the quality of the rotator cuff.

Background: The most common complication of arthroscopic rotator cuff repair is retear, which is more common in larger tears and older patients. We hypothesized that the quality of the torn tendon is important in protecting against retear. Surgeons have traditionally assessed the quality of repaired tendons with a four-point Likert scale. Shear Wave Elastography Ultrasound (SWEUS) is a recent technological advancement that can quantify soft-tissue stiffness. This study aimed to determine how closely a surgeon's intraoperative ranking of tissue quality during rotator cuff repair correlated to postoperative supraspinatus tendon stiffness measured by SWEUS. Methods: This was a prospective case series on 50 patients undergoing arthroscopic rotator cuff repair, involving SWEUS measurements of each patient's supraspinatus tendon at 8 days, 6 weeks, 12 weeks, 6 months, and 12 months. The intraoperative surgeon score of tissue quality for each patient was ranked on a four-point Likert scale. Each patient's scores were compared to postoperative SWEUS velocity measurements of the supraspinatus tendon postrepair. Results: The SWEUS determined stiffness of supraspinatus tendons at their repaired insertion site postrepair increased by 22% from 6.3 ± 0.2 m/s to 7.7 ± 0.3 m/s over 12 months as the tendons healed (P = .0001). Supraspinatus tendon stiffness was greater in patients with smaller tears (r = -0.50, P = .001) and of younger age (r = -0.58, P = .00001). Surgeons also consistently rated younger patients (rs = -0.49, P = .0001) and smaller tears (rs = -0.56, P = .00001) as having superior intraoperative tendon quality. The correlations between SWEUS velocity and surgeon tissue quality rankings were modest at best and strongest at 12 weeks (rs = 0.27, P = .04). There were modest associations between SWEUS tendon stiffness and surgeon tendon mobility rankings at 6 weeks (rs = 0.26, P = .04) and repair quality rankings at 12 months (rs = 0.36, P = .02). Conclusions: These data support the finding that machines (SWEUS) are better at assessing torn rotator cuff tendon quality and whether that tendon will heal after repair than the 'person' performing the surgery. Supraspinatus tendons lose stiffness as they get older and when the tear is larger, likely explaining why retear post-cuff repair is more common with advanced age and larger tears.

Ultrasound Guided Arthroscopic Removal of Calcific Tendonitis: A Minimum of 2-Year Followup.

Background: We have developed a novel technique for managing rotator cuff calcific tendonitis, involving arthroscopic debridement of calcific tendonitis with localization assistance from a breast biopsy needle under ultrasound guidance. While we have demonstrated encouraging results at six-month follow-up, the medium-term outcomes and the long-term outcomes of this technique at 2 years or beyond are unknown. The aim of this paper was to determine if this technique was successful in resolving symptoms after two years and beyond. Study Design: Retrospective Cohort Study. Methods: Patients who underwent arthroscopic debridement of calcific tendonitis with localization assistance from a breast biopsy needle under ultrasound guidance by a senior surgeon were evaluated using patient-rated pain scores and functional status with the use of the Likert scales and via examiner-rated shoulder range-of-motion and strength at the pre-operative visit, at 1, 6, 12, and 24 weeks post-operatively, and long-term at a mean of 249 weeks after surgery. Results: At a mean follow-up period of 4.8 years (range, 2-10 years), 31 patients (33 shoulders) experienced significant improvement in the severity of pain at rest, with overhead activities, and during sleep compared to their pre-operative presentation (p < 0.001). The patient experienced less frequent pain during activities and sleep, and a decreased frequency of extreme pain (p < 0.001). Passive range of abduction (p = 0.003), forward flexion (p < 0.001), and supraspinatus strength (p = 0.018) improved compared to the presurgical presentation. Out of 27 patients, 24 patients (89%) had complete resolution of calcific tendonitis, and 26 patients (96%) had an intact rotator cuff. Conclusion: Arthroscopic debridement of calcific tendonitis with localization assistance from a breast biopsy needle under ultrasound guidance was very effective. Patients had significant pain relief, improved range of motion, and a reduction in stiffness at a mean post-operative period of 4.8 years. Patients had a significant reduction in residual calcification, and rotator cuff integrity was largely preserved by long-term follow-up. What is known about this subject: Calcific tendonitis of the rotator cuff is one of the most painful and debilitating disorders of the shoulder. This condition is characterized by the deposition of calcium-phosphate crystals within the rotator cuff tendons. Arthroscopic debridement and excision of rotator cuff calcifications have proven to be efficacious treatments with regards to clinical and functional outcomes in the short and medium term. Identifying the calcific lesion intra-operatively, however, can prove to be challenging. Furthermore, inadequate excision of the calcific deposit has been shown to have poorer clinical outcomes. We designed a technique that utilizes the assistance of ultrasound to guide a localization-biopsy wire to the calcific lesion. This technique aids in precisely identifying the location of the lesion intra-operatively to optimize accuracy in removing the maximum amount of calcific deposit possible. A short-term follow-up study by us has demonstrated successful outcomes with regards to the return of function and relief of pain. However, there have been no studies evaluating the effectiveness of this particular technique beyond six months. What this study adds to current knowledge: At a mean of 4.8 years, arthroscopic debridement of calcific tendonitis, using our technique, was successful in relieving the severity and frequency of pain with overhead activities, pain at rest, and pain during sleep, as well as improving range of motion.

Reliability of a Novel Preoperative Protocol for Determining Graft Sizes for Superior Capsular Reconstruction Using Plain Film Radiography.

BACKGROUND: Superior capsular reconstruction (SCR) for massive, irreparable rotator cuff tears involves anchoring a graft between the superior glenoid and the greater tuberosity of the humerus. Optimizing the graft size is important. We aimed (1) to evaluate the reliability of plain film radiography in determining graft size for SCR and (2) to create a database to help predict future graft sizes. METHODS: An inter- and intra-rater reliability trial was conducted on 10 and 6 subjects with healthy shoulders, respectively, using plain film radiography to measure the distance between the superior glenoid and the supraspinatus footprint. The subjects were positioned upright with an abduction pillow modified to hold the shoulder at 30° abduction and 45° external rotation, afterwhich a true antero-posterior shoulder radiograph was captured. Thirty subjects were recruited for the database and grouped using the aforementioned protocol. RESULTS: The inter-rater and intra-rater trial agreement was excellent, with intraclass correlation coefficients of 0.94 (95% CI) and 0.76 (95% CI), respectively. Three medio-lateral patch sizes, of 33 mm, 38 mm, and 47 mm, were proposed based on the protocol in 30 subjects. CONCLUSIONS: Plain film radiography demonstrated excellent reliability in measuring the distance between the superior glenoid and the supraspinatus footprint. Three ordinal patch sizes are proposed.

A Systematic Temporal Assessment of Changes in Tendon Stiffness Following Rotator Cuff Repair.

OBJECTIVES: How the material properties of the human supraspinatus tendon change following arthroscopic rotator cuff repair is undetermined. Shear wave elastography ultrasound is a relatively new, noninvasive measure of tissue stiffness. We aimed to evaluate any temporal changes in stiffness and/or thickness of supraspinatus tendons in humans following primary arthroscopic rotator cuff repair. METHODS: Shear wave elastography was performed at three predetermined regions by a single sonographer at 1-, 6-, 12-, 24-, and 52 weeks postoperatively in 50 consecutive single-row inverted mattress primary arthroscopic rotator cuff repairs. One-way ANOVA with Tukey's correction and Spearman's correlation tests was performed. RESULTS: Of 50 patients, two retore by 1-week and were excluded. Two patients retore at 6 weeks, two at 12 weeks, and one at 24 weeks. The mean tendon stiffness in 48 patients at the tendon footprint increased by 21% (1.32 m/s) at 6 months (P < .001), with the lateral tendon stiffening before the medial tendon. Tendon thickness decreased by 11% (0.6 mm) at 6 weeks (P = .008), then stabilized to 24 weeks. Tendons that were less elastographically stiff at 1 week were more likely to be thinner at 6-weeks (r = .38, P = .010). CONCLUSIONS: The data supports the hypothesis that rotator cuff tendons repaired using the single-row inverted-mattress technique take 6 weeks to heal to bone. Unlike in other tendons, there was no hypertrophic healing response. Prior to 6 weeks, the tendon may stretch/thin-out, particularly if its material properties, as assessed by shear wave elastography, are inferior. The material properties of the tendon improved at the tendon insertion site first, then medially out to 12 months post-repair.

An evaluation of shear wave elastographic characteristics of the supraspinatus tendon after rotator cuff repair.

BACKGROUND: The main complication of rotator cuff repair is retear, which is most common in older patients and patients with greater tear sizes. However, it is unknown why these factors are associated with increased rates of retear. The aim of this study was to determine whether the factors associated with rotator cuff retear (age, tear size, sex, history of trauma, and duration of symptoms) are also associated with decreased mechanical stiffness of the supraspinatus tendon after repair, as assessed by shear wave elastography. METHODS: This was a prospective study of 50 patients undergoing primary rotator cuff repair. A sonographer conducted shear wave elastography ultrasound in all patients at 1, 6, 12, 26, and 52 weeks after repair. The shear wave velocity of the supraspinatus tendon was measured at the tendon-bone interface, 3 mm medial to the interface, and 6 mm medial to the interface. A multiple linear regression analysis was performed with calculation of Cohen F2 values to determine the factors that independently affected supraspinatus tendon stiffness postoperatively. RESULTS: For every decade increase in age, the shear wave velocity of the supraspinatus tendon decreased by 0.5 m/s (P = .004). Greater tear size correlated with reduced supraspinatus shear wave velocity (P < .03 at 6 weeks). Male patients had greater supraspinatus tendon stiffness than female patients (8.2 m/s vs. 6.9 m/s, P = .04). Tendons in patients with a history of trauma were approximately 16% stiffer postoperatively than those in patients with no trauma history (P < .001). Duration of symptoms had no impact on the mechanical stiffness of the supraspinatus tendon. CONCLUSION: Older age, larger tear size, female sex, and nontraumatic tear causation were independently associated with reduced shear wave velocity of the supraspinatus tendon postoperatively. The findings of our study correlate with the results of cohort studies assessing the influence of these variables on rotator cuff retear rates, suggesting that the mechanical stiffness of the supraspinatus tendon, as assessed by shear wave elastography, may have an important association with a successful repair.

Fibrillar matrix, Echogenicity, Contour, Thickness, and Suture (FECTS) vs. Global: A comparison of 2 scales developed to assess ultrasound images post rotator cuff repair.

BACKGROUND: Ultrasound is commonly used to assess rotator cuff repair (RCR), but no standardized criterion exists to characterize the tendon. PURPOSE: The aims of this study were to (1) develop content validity for ultrasound specific criteria to grade the postoperative appearance of a tendon after RCR, (2) assess the reliability of the criteria, and (3) assess the feasibility to use these assessments. METHODOLOGY: Following expert consultation and literature review for content validity, 2 scales were created: 1) the Fibrillar matrix, Echogenicity, Contour, Thickness, and Suture (FECTS) scale and 2) the Rotator Cuff Repair-Investigator Global Assessment (RCR-IGA). A prospective cohort study was undertaken on patients who had received a RCR and serial B-mode ultrasound images. Four raters assessed the 64-ultrasound images using the scales created in a blinded fashion using intraclass correlation coefficients. RESULTS: The FECTS scale was a composite score with 5 key parameters and the RCR-IGA scale was a 5-point global score. The intrarater reliability for the FECTS scale was excellent for the most experienced rater (0.92) and fair for the rater with no experience (0.72). The intrarater reliability for the RCR-IGA scale was excellent for 3 of the 4 raters (0.80-0.87) and fair when used by the least experienced rater (0.56). Inter-rater testing for all the FECTS scale parameters had excellent reliability (0.82-0.92) except for Fibrillar matrix (0.73). The average time to complete the FECTS scale per image was 23 seconds and 11 seconds for the RCR-IGA scale. CONCLUSION: The FECTS scale and the RCR-IGA scale are reliable tools to assess the ultrasonic appearance of the repaired rotator cuff tendon. The FECTS scale was more reliable for less experienced assessors. The RCR-IGA scale was easier, more time efficient and reliable for those with experience.

Synthetic polytetrafluoroethylene patches for irreparable rotator cuff tears-how are they doing at 5 years?

BACKGROUND: Treating massive and irreparable rotator cuff tears are problematic. Several studies have reported that polytetrafluoroethylene (PTFE) patches demonstrated excellent construct integrity and positive clinical and patient outcomes. However, these studies either had small sample sizes or short follow-up periods. PURPOSE: To determine the survivorship, efficacy, and medium-term (2-19 years) outcomes of PTFE patch repairs. METHODS: This retrospective study used prospectively collected data to establish the medium-term outcomes of PTFE interposition patch repairs for massive rotator cuff tears that could not be repaired by the standard technique. Patients included those who met the ≥2-year follow-up criteria post repair. Standardized assessments of patient-ranked shoulder pain and function and shoulder strength and passive range of motion (ROM) were performed preoperatively and at follow-up visits. Radiographs and ultrasonography were used to evaluate repair integrity, measure proximal humeral head migration, and determine glenohumeral arthritis scores. RESULTS: Forty-one shoulders formed the study cohort at a mean follow-up period of 5 years (range: 2-19 years). The mean age of this group was 72 (standard deviation: 10; range: 50-88) and had 14 cm2 tears at surgery. Twenty-five of 41 (61%) PTFE interposition patch repairs remained intact at an average of 5 years postrepair. Thirteen patches failed at the patch-tendon junction, 1 was removed, and 2 patients underwent reverse total shoulder replacement. Patient-ranked shoulder stiffness (P < .05), frequency of pain during activity and sleep (P < .001), pain levels during overhead activity and rest (P < .001), and overall shoulder function significantly improved from bad preoperatively to fair at the mean 5-year postoperative visit (P < .001). No significant improvements were demonstrated in dynamometer-measured shoulder strength maneuvers and passive ROM. All patients demonstrated proximal humeral head migration on shoulder radiographs regardless of repair integrity (mean Upper Migration Index = 1.2). Failed repairs were associated with higher mean preoperative glenohumeral arthritis grades compared with intact repairs (grade 2 in failed repairs compared with grade 1 in intact repairs) (P < .01). CONCLUSION: PTFE interposition patch repairs for massive and irreparable tears had good construct integrity and clinical outcomes at 2 years. These outcomes were not maintained. PTFE patch repairs often failed at the patch-tendon junction at 4 years and beyond and were ineffective in (1) preventing proximal humeral head migration, (2) stopping progression of glenohumeral arthritis, and (3) improving shoulder strength and ROM.

Stiffness and arthroscopic rotator cuff repair: a literature review.

Background and Objective: Tendon retear is the most common complication following rotator cuff repair surgery. Understanding the factors that are associated with greater risks of retear is important so surgeons can provide accurate prognostic information to patients. Advanced age and larger tear size have been shown to be associated with greater risk of retear at 6 months using multiple logistic regression analysis. Stiffness is the second most common complication, however recent evidence suggests that early postoperative stiffness may be associated with a more robust healing response. Thus, this paper aims to critically review the independent predictors of retear in rotator cuff repair patients. Methods: Literature review was conducted using electronic databases from their dates of inception. Key Content and Findings: There are multiple factors that affect rotator cuff repair integrity detailed in the literature. Tear size appeared to be the most important predictor of retear following rotator cuff repair. Postoperative stiffness at 6 and 12 weeks after surgery appears to be a factor associated with more intact repairs at 6 months. Shoulder stiffness tends to resolve within 6 months following the operation. This protective effect persists up to 5 years postoperatively. Conclusions: Shoulder stiffness may be an important protective factor against rotator cuff retear which requires further investigation from future studies. It is important to determine the relative importance of stiffness when compared to known important factors such as tear size with regards to its effect on rotator cuff repair integrity.

The fate of sutures post rotator cuff repair.

BACKGROUND: Ultrasonographic imaging has been widely used as a diagnostic tool for rotator cuff tears. Several studies have explored the changes in rotator cuff tendon morphology after arthroscopic cuff repair; however, none have addressed the fate of sutures. The aim of this study was to determine (1) if the sutures migrate through the tendon during the postoperative healing period in patients who have had arthroscopic rotator cuff repair; (2) if the sutures do migrate, the time point at which it does; and (3) if the quality of the tendon, in terms of tendon stiffness, modulus of elasticity, bursal thickness, and anatomic footprint, affects suture migration. METHODS: This was a prospective study involving 21 patients who had primary arthroscopic rotator cuff repair performed by a single surgeon. All patients were assessed at 8 days, 6 weeks, 12 weeks, and 24 weeks postrepair; during each assessment, patients underwent an ultrasonographic examination (using a Siemens ACUSON S3000 ultrasonographic system, following a standardized protocol), where supraspinatus tendon thickness and thickness of tendon tissues below and above the suture were measured. Measurements of anatomic footprint, bursal thickness, tendon stiffness, and modulus of elasticity were obtained to assess tendon quality. RESULTS: Of the 21 participants, 14 (67%) had full-thickness tears and 7 (33%) had partial-thickness tears. Between the 12th- and 24th-week follow-up, 2 patients' tendons were found to be not intact. Within the first 12 weeks of the postrepair healing period, the sutures migrated inferiorly, through to the middle of the tendon at the footprint-articular junction (ie, ratio of tendon tissue thickness below the suture to the total tendon thickness = 0.5) (P = .03). The mean anatomic footprint increased from 8.4 ± 1.6 mm to 9.1 ± 1.2 mm between 8 days and 6 weeks (P = .04); bursal thickness decreased during the 24-week period from 1.5 ± 0.9 mm to 0.7 ± 0.4 mm (P = .005); tendon modulus of elasticity increased from 154 ± 75 kPa to 205 ± 96 kPa between 8 days and 24 weeks (P = .05). DISCUSSION: This is the first study to investigate suture position and migration post arthroscopic rotator cuff repair. The findings of this study suggest that sutures migrating to the middle of the tendon during the postoperative healing process is a normal phenomenon observed on ultrasonography.

Towards single-chip radiofrequency signal processing via acoustoelectric electron-phonon interactions.

The addition of active, nonlinear, and nonreciprocal functionalities to passive piezoelectric acoustic wave technologies could enable all-acoustic and therefore ultra-compact radiofrequency signal processors. Toward this goal, we present a heterogeneously integrated acoustoelectric material platform consisting of a 50 nm indium gallium arsenide epitaxial semiconductor film in direct contact with a 41° YX lithium niobate piezoelectric substrate. We then demonstrate three of the main components of an all-acoustic radiofrequency signal processor: passive delay line filters, amplifiers, and circulators. Heterogeneous integration allows for simultaneous, independent optimization of the piezoelectric-acoustic and electronic properties, leading to the highest performing surface acoustic wave amplifiers ever developed in terms of gain per unit length and DC power dissipation, as well as the first-ever demonstrated acoustoelectric circulator with an isolation of 46 dB with a pulsed DC bias. Finally, we describe how the remaining components of an all-acoustic radiofrequency signal processor are an extension of this work.

A rapid review of Indigenous boys' and men's sexual health in Canada.

Indigenous boys and men in Canada face adverse social and structural circumstances that affect their ability to achieve and maintain sexual health. Research about Indigenous sexual health, however, is largely limited to matters relating to women and statistics on sexually transmitted infections. A rapid review of research was conducted to determine what is currently known about Indigenous boys' and men's sexual health in Canada. Given the prevalence of research documenting quantitative disparities, the current review included qualitative research only. Thirteen included studies explored a wide range of topics relating to sexual health and an overarching intersection between social conditions and individual health outcomes was observed. The results of this review reveal significant gaps in the literature relating to the holistic sexual health of Indigenous boys and men and highlight important domains of sexual health to consider in future research. Findings suggest that sexual health programmes that promote traditional Indigenous knowledge and intergenerational relationships may be effective for promoting sexual health among Indigenous boys and men.

Ultrasound-guided repair of the distal biceps tendon.

Surgical repair of the distal biceps tendon rupture can be a challenge, especially when patients present with a retracted tendon. The tendon stump is often difficult to find and retrieve. In this aticle, we described a technique using ultrasound imaging at the start of the procedure. Under ultrasound guidance, a breast biopsy needle is used to help localize and mark the retracted tendon edge as well as the distal rupture site. Ultrasound is also used to mark important neurovascular structures at risk to help speed up exposure and avoid complications.

Reliability of shear wave elastography ultrasound to assess the supraspinatus tendon: An intra and inter-rater in vivo study.

INTRODUCTION: Shear wave elastography ultrasound is a relatively new technique that evaluates the tissue elasticity by applying an acoustic radiation force impulse. It is undetermined how reliable this modality is in assessing rotator cuff tendons. The aim of this study, therefore, was to evaluate the reliability of shear wave elastography ultrasound to assess the stiffness of normal and tendinopathic supraspinatus tendons. METHODS: An inter- and intra-rater reliability trial was carried out using shear wave elastography to assess the supraspinatus tendon at its distal insertion, by measuring shear wave velocity and elasticity. Twenty participants with a mean age of 37 (21-69) years old were evaluated. Ten subjects with normal supraspinatus tendon and 10 subjects with tendinopathic tendon were selected. The Virtual Touch Imaging Quantification program was used to generate the acoustic radiation force impulse and to obtain the elastography data. Three raters with different experience in conventional ultrasound were used for the inter-rater trial in normal tendons and the most experienced rater examined all subjects for the intra-rater reliability evaluation. Each rater obtained three readings in three different examinations per subject over a one-week period. RESULTS: The mean (±SEM) shear wave velocity for the normal supraspinatus tendon was 9.96 ± 0.02 m/s (=297 kPa), while in the tendinopathic supraspinatus tendon was 8.3 ± 0.2 m/s (=207 kPa) (p < 0.001). The intra-rater trial agreement was excellent, with an intraclass correlation coefficient = 0.96. In the inter-rater testing, the mean shear wave velocity in normal tendons was 9.90 ± 0.07 m/s (=294 kPa), with intraclass correlation coefficient = 0.45. CONCLUSION: Shear wave elastography ultrasound was able to show that tendinopathic tendons were less stiff than normal tendons. It was a reliable imaging technique to assess the supraspinatus tendon, especially when used by a single experienced musculoskeletal sonographer.

The fate of hypoechoic cleft.

BACKGROUND: Hypoechoic clefts are small defects found on ultrasonographs in the intact rotator cuff tendon after rotator cuff repair. Little is known about the fate of these hypoechoic clefts, as to whether they will heal, persist, or develop into a retear. METHODS: This prospective study involved 24 patients who underwent arthroscopic rotator cuff repair surgery and were found to have a hypoechoic cleft at the 6-month postoperative ultrasonograph. A subsequent ultrasonography follow-up was performed at 9 months or later by the same ultrasonographer and the repair re-examined. RESULTS: At an average postoperative follow-up of 21 months, 14 of the 25 hypoechoic clefts (56%) had healed; 5 (20%) had persistent clefts whereas 6 (24%) had progressed to a full-thickness rotator cuff retear. Patients with a hypoechoic cleft ≥36 mm2 were 5 times more likely to have a retear than patients with hypoechoic cleft <36 mm2 (relative risk = 5.1; P < .05). Patients with hypoechoic clefts ≥36 mm2 had a higher frequency of pain during activity and sleep and a lower level of satisfaction at the 21-month follow-up compared to those with small hypoechoic clefts (P = .05). CONCLUSION: This is the first study to evaluate the natural history of a hypoechoic cleft found at ultrasonography following rotator cuff repair. The study showed that clefts less than 36 mm2 are likely to heal, while those greater than 36 mm2 are at high risk of progressing to full-thickness retears.

Evaluating the Outcomes of Rotator Cuff Repairs With Polytetrafluoroethylene Patches for Massive and Irreparable Rotator Cuff Tears With a Minimum 2-Year Follow-up.

BACKGROUND: Massive and irreparable rotator cuff tears are difficult to manage surgically. One technique is to use a synthetic polytetrafluoroethylene (PTFE) patch to bridge the tear. However, there is little information regarding the outcomes of this procedure. PURPOSE: To determine the ≥2-year outcomes of patients for whom synthetic patches were used as tendon substitutes to bridge irreparable rotator cuff defects. STUDY DESIGN: Case series; Level of evidence, 4. METHODS: This retrospective cohort study used prospectively collected data. Patients included those with a synthetic patch inserted as an interposition graft for large and/or irreparable rotator cuff tears with a minimum 2-year follow-up. Standardized assessment of shoulder pain, function, range of motion, and strength was performed preoperatively, at 6 and 12 weeks, and at 6 months and ≥2 years. Radiograph and ultrasound were performed preoperatively, at 6 months, and ≥2 years. RESULTS: At a mean of 36 months, 58 of 68 eligible patients were followed up, and 53 of 58 (90%) patches remained in situ. Three patches failed at the patch-tendon interface, while 1 patient (2 shoulders/patches) went on to have reverse total shoulder replacements. Patient-ranked shoulder stiffness ( P < .001), frequency of pain with activity and sleep ( P < .0001), level of pain at rest and overhead ( P < .0001), and overall shoulder function improved from bad to very good ( P < .0001) by 6 months. Supraspinatus (mean ± SEM: 29 ± 16 N to 42 ± 13 N) and external rotation (39 ± 13 N to 59 ± 15 N) strength were the most notable increases at the ≥2-year follow-up ( P < .0001). Passive range of motion also improved by 49% to 67%; forward flexion, from 131° to 171°; abduction, from 117° to 161°; external rotation, from 38° to 55°; and internal rotation, from L3 to T10 ( P < .0001) preoperatively to ≥2 years. The most improvement in passive range of motion occurred between 12 months and ≥2 years. The mean (SD) Constant-Murley score was 90 (12), while the American Shoulder and Elbow Surgeons score was 95 (8). CONCLUSION: At 36 months postoperatively, patients who had synthetic patches used as tendon substitutes to bridge irreparable rotator cuff defects reported less pain and greater overall shoulder function as compared with preoperative assessments. They demonstrated improved range of passive motion and improved strength. The data support the hypothesis that the technique of using a synthetic PTFE patch to bridge a large and/or irreparable tear has good construct integrity and improves patient and clinical outcomes.