RESUMO
BACKGROUND: Fetal and neonatal exposure to lead is associated with irreversible adverse effects on neural development. There is no reliable threshold for lead effect, so limiting exposure is recommended. A significant correlation has been reported between post-transfusion blood lead level (BLL) in infants and lead levels in transfused RBC units. We measured levels of lead, mercury, and cadmium, in Canadian donor blood to investigate if concerning levels for neonatal transfusion exist. STUDY DESIGN AND METHODS: Whole blood samples from blood donors (n = 2529) were shipped cold within 7 days of donation. All permanent blood donation clinics across Canada were sampled. Twelve of these permanent clinics and 8 mobile clinics with a greater potential for having higher lead or mercury levels were oversampled. Heavy metals were measured by inductively coupled plasma mass spectrometry. RESULTS: Of all donations, 2.2% (lead) and 0.4% (mercury) had levels higher than the recommended thresholds for safe neonatal transfusion. BLLs were higher in males but there was no significant difference in the blood mercury levels of males versus females. Cadmium levels were higher in females. There was a positive correlation between donor age and levels of heavy metals, with lead having the strongest correlation (r = 0.47, p < .0001). Three clinics in close proximity to two lead-producing mines were among the clinics with the highest BLLs. Significantly higher blood mercury levels were observed in coastal clinics. CONCLUSION: Our data on donor blood heavy metal levels supports considering blood transfusion as an exposure source to heavy metals and encourages informed selection of blood units for transfusion to vulnerable groups.
Assuntos
Doadores de Sangue , Cádmio , Chumbo , Mercúrio , Humanos , Chumbo/sangue , Feminino , Mercúrio/sangue , Masculino , Cádmio/sangue , Canadá , Adulto , Pessoa de Meia-Idade , Adulto Jovem , Adolescente , Recém-NascidoRESUMO
BACKGROUND: Each unit of red blood cells (RBCs) produced represents a significant cost to the healthcare system. Unnecessary blood wastage should be minimized. In clinical settings, alterations to blood component bags after issue from the protected setting of the blood bank include pen markings, and those that are exposed to an infectious environment require surface disinfecting. These units may be discarded due to unclear effects on RBC quality. In this study, we investigate whether pen markings or surface disinfection negatively affects the quality of packed RBCs and whether pen ink diffuses through the blood bag. STUDY DESIGN AND METHODS: RBC bags were marked with pens (water, oil, or alcohol-based) or subjected to surface disinfection (ethanol, hydrogen peroxide [Preempt wipes], or benzalkonium chloride-based wipes [CaviWipes]) and sampled 24 h after applying the treatment and at day 42 post collection (n = 3 for each condition). The samples were analyzed for RBC in vitro quality markers. The presence of any ink in the RBC bags was investigated using mass spectrometry (n = 2). RESULTS: Data from 24 h and day 42 time points indicated no differences in RBC count, mean corpuscular volume, morphology, deformability, potassium content, or hemolysis for either pen markings or disinfectants when compared with their untreated controls (p > .05). No trace of ink was detected inside the bag. CONCLUSION: RBC units marked with ballpoint, gel, or Sharpie pens do not suffer a loss of in vitro quality, nor do RBC units which have been surface disinfected with 70% ethanol, Preempt wipes or CaviWipes.
Assuntos
Desinfetantes , Humanos , Desinfetantes/farmacologia , Tinta , Preservação de Sangue/métodos , Eritrócitos , Cloreto de Polivinila/química , Cloreto de Polivinila/farmacologia , Etanol/farmacologia , Compostos OrgânicosRESUMO
BACKGROUND: Mechanical stress on red blood cells is associated with using infusion pumps for blood administration. Current standards in North America leave it to healthcare facilities to consult with manufacturers about infusion pump safety for transfusion; studies on various pumps and red blood cell (RBC) conditions are scarce. STUDY DESIGN AND METHODS: RBC units were pumped through four infusion pumps on d22 (22 days postcollection), d40, d28 after gamma irradiation on d14 (I14d28), and d22 after irradiation on d21 (I21d22). For each experiment, three units were pooled and split among four bags. Samples were collected at gravity and after pumping at clinical nonemergency rates. Hemolysis %, microvesicles, potassium, lactate dehydrogenase, mechanical fragility index levels, and morphology evaluations were performed (n = 5-6). RESULTS: Hemolysis levels of Piston and Linear Peristaltic pump samples were not different from hemolysis of corresponding gravity samples. Peristaltic samples had significantly higher hemolysis compared to gravity, and other pumps, however, maximum mean difference was limited to 0.05%. Pumping at 50 mL/h resulted in the highest hemolysis level. Change in hemolysis % due to pumping was significantly higher in d40 and I21d22 units. No combination of pumps and RBCs conditions led to hemolysis >0.8%. Besides hemolysis, lactate dehydrogenase release was the only marker that demonstrated some differences between infusions via pump versus gravity. CONCLUSION: The pump design affects the degree of hemolysis. However, for all tested pumps and RBC conditions, this increase was minimal. Hemolysis measurement on d40 and I21d22 at 50 mL/h were concluded to be appropriate parameters for pump evaluation.
Assuntos
Transfusão de Eritrócitos , Eritrócitos , Contagem de Eritrócitos , Transfusão de Eritrócitos/métodos , Hemólise , Humanos , Bombas de InfusãoRESUMO
Carbamylation of blood proteins is a common post-translational modification that occurs upon kidney dysfunction that is strongly associated with deleterious outcomes for patients treated using hemodialysis. In this study, we focused on the removal of two representative carbamylated plasma proteins, carbamylated albumin (cHSA) and fibrinogen (cFgn), through adsorption onto a surface functionalized with a specific peptide (cH2p1). Surfaces modified with poly(hydroxyethyl methacrylate) (p(HEMA)) were prepared using surface-initiated atom transfer radical polymerization (SI-ATRP) techniques and functionalized with cH2p1. cH2p1-functionalized surfaces showed selective binding toward cHSA and cFgn, compared to their native protein form, with NH-cH2p1 of superior selectivity than CO-cH2p1. The adsorption capacity of carbamylated protein on NH-cH2p1 was maintained in diluted plasma, and ultralow adsorption of native Fgn was observed. Similar to unmodified p(HEMA) surfaces, NH-cH2p1 showed a low platelet adhesion and activation, suggesting that the designed surface does not adversely affect platelets.
Assuntos
Proteínas de Transporte , Peptídeos , Adsorção , Fibrinogênio/metabolismo , Humanos , Propriedades de SuperfícieRESUMO
While differences among donors has long challenged meeting quality standards for the production of blood components for transfusion, only recently has the molecular basis for many of these differences become understood. This review article will examine our current understanding of the molecular differences that impact the quality of red blood cells (RBC), platelets, and plasma components. Factors affecting RBC quality include cytoskeletal elements and membrane proteins associated with the oxidative response as well as known enzyme polymorphisms and hemoglobin variants. Donor age and health status may also be important. Platelet quality is impacted by variables that are less well understood, but that include platelet storage sensitive metabolic parameters, responsiveness to agonists accumulating in storage containers and factors affecting the maintenance of pH. An increased understanding of these variables can be used to improve the quality of blood components for transfusion by using donor management algorithms based on a donors individual molecular and genetic profile.
Assuntos
Doadores de Sangue , Plaquetas , Preservação de Sangue , Eritrócitos , Fatores Etários , HumanosRESUMO
BACKGROUND: Transfusion medicine standards in Canada state that adult recipients can be transfused with cryoprecipitate of any ABO group, however, not all hospitals follow this guideline. There is a paucity of data on cryoprecipitate anti-A/B levels to reinforce standards. STUDY DESIGN AND METHODS: Manual tube antibody titration was performed on 7 units of group O plasma and the corresponding cryosupernatant plasma and cryoprecipitate. IgG/IgM levels were determined by nephelometry. Additionally, 10 cryoprecipitate each from groups A, B, and O were similarly assessed. From the antibody titer distribution among these samples, the probability of making a pool of cryoprecipitate with a titer ≥1:100 was calculated using bootstrap analysis. RESULTS: Anti-A/B titers in cryoprecipitate were equivalent to those in corresponding plasma; partitioning of anti-A/B activity into cryoprecipitate was not observed. Average IgM concentration was higher in cryoprecipitate than in plasma (P < .01). However, no correlation between IgM levels and anti-A/B titers was established. Among 30 cryoprecipitates from routine blood bank inventory, the median antibody titer and mode were 1:32 and 1:16, respectively. Of the samples tested, 4 of 30 and 9 of 30 had titers above 1:100 and 1:50, respectively. The probability of transfusing an adult dose of cryoprecipitate (pool of 10 cryoprecipitate) with a titer higher than 1:100 was calculated to be less than 1 in 3 million. CONCLUSIONS: This study provides strong evidence to support current Canadian transfusion medicine standards on the safety of transfusion of cryoprecipitate without the need for blood group matching in adult recipients.
Assuntos
Sistema ABO de Grupos Sanguíneos/imunologia , Incompatibilidade de Grupos Sanguíneos/imunologia , Transfusão de Sangue/normas , Fator VIII/imunologia , Fibrinogênio/imunologia , Adulto , Canadá , Humanos , Imunoglobulina G/sangue , Imunoglobulina M/sangue , Testes Imunológicos , Medição de RiscoRESUMO
Bacterial attachment and biofilm formation pose major challenges to the optimal performance of indwelling devices. Current coating methods have significant deficiencies including the lack of long-term activity, easy of application, and adaptability to diverse materials. Here we describe a coating method that could potentially overcome such limitations and yield an ultrathin coating with long-term antibiofilm activity. We utilized the interaction between polydopamine (PDA) nanoaggregates/nanoparticles and ultrahigh molecular weight (uHMW) hydrophilic polymers to generate stable coatings with broad spectrum antibiofilm activity. We used a short-term bacterial adhesion assay as an initial screening method to identify coating compositions that give superior performance and found that only selected polymers (out of 13 different types) and molecular weights gave promising antifouling activity. Optimization of PDA self-assembly, polymer-PDA interaction, and deposition on the surface using uHMW poly( N,N-dimethylacrylamide) (PDMA) (â¼795 kDa) resulted in a stable ultrathin coating (â¼19 nm) with excellent antifouling and antibiofilm properties (>4 weeks) against diverse bacteria (â¼108 CFU/mL) in shaking and flow conditions. The ultrathin coating is effective on diverse substrates including metals and polymeric substrates. The uHMW PDMA is stabilized in the coating via supramolecular interactions with PDA and generated a surface that is highly enriched with PDMA in aqueous conditions. Based on the surface analyses data, we also propose a mechanism for the stable coating formation. The molecular weight of PDMA is a crucial factor, and only uHMW polymers generate this property. An attractive feature of the coating is that it does not contain any antimicrobial agents and has the potential to prevent biofilm formation for diverse applications both short- and long-term.
Assuntos
Antibacterianos/química , Biofilmes , Materiais Revestidos Biocompatíveis/química , Nanopartículas/química , Polímeros/química , Acrilamidas/química , Aderência Bacteriana , Interações Hidrofóbicas e Hidrofílicas , Indóis/química , Propriedades de Superfície , Titânio/químicaRESUMO
Platelets have a limited shelf life, due to the risk of bacterial contamination and platelet quality loss. Most platelet storage bags are made of a mixture of polyvinyl chloride with a plasticizer, denoted as pPVC. To improve biocompatibility of pPVC with platelets and to inhibit bacterial biofilm formation, an antifouling polymer coating is developed using mussel-inspired chemistry. A copolymer of N,N-dimethylacrylamide and N-(3-aminopropyl)methacrylamide hydrochloride is synthesized and coupled with catechol groups, named DA51-cat. Under mild aqueous conditions, pPVC is first equilibrated with an anchoring polydopamine layer, followed by a DA51-cat layer. Measurements show this coating decreases fibrinogen adsorption to 5% of the control surfaces. One-step coating with DA51-cat does not coat pPVC efficiently although it is sufficient for coating silicon wafers and gold substrates. The dual layer coating on platelet bags resists bacterial biofilm formation and considerably decreases platelet adhesion. A cationic antimicrobial peptide, E6, is conjugated to DA51-cat then coated on silicon wafers and introduces bactericidal activity to these surfaces. Time-of-flight second ion-mass spectroscopy is successfully applied to characterize these surfaces. pPVC is widely used in medical devices; this method provides an approach to controlling biofouling and bacterial growth on it without elaborate surface modification procedures.
Assuntos
Biofilmes/crescimento & desenvolvimento , Incrustação Biológica/prevenção & controle , Plaquetas/metabolismo , Preservação de Sangue , Materiais Revestidos Biocompatíveis/química , Indóis/química , Polímeros/química , Staphylococcus epidermidis/fisiologia , Adulto , Peptídeos Catiônicos Antimicrobianos/química , Aderência Bacteriana , Plaquetas/microbiologia , Preservação de Sangue/instrumentação , Preservação de Sangue/métodos , Catecóis/química , Feminino , Humanos , MasculinoRESUMO
BACKGROUND: Missed detection of Staphylococcus epidermidis contamination in platelet (PLT) storage bags by the standard 24-hour-postcollection BacT/ALERT screening test has been documented. A slow growth rate and the strong tendency of this bacterium to adhere to surfaces can contribute to missed detection of the pathogen. STUDY DESIGN AND METHODS: Topography of two different PLT storage bag surfaces, textured (rough) and smooth surfaces of Terumo 80440 bags (designated A15), was studied. Adhesion of biofilm-positive and -negative S. epidermidis strains on these surfaces was evaluated under static conditions. Quality of stored PLTs in A15 bags under blood bank conditions was compared for two different bag orientations (rough vs. smooth surface down) on Days 2, 5, and 7 of storage. PLT adhesion on the surfaces was evaluated after 7 days of storage. RESULTS: Bacterial adhesion and biofilm formation were significantly higher on the rough surfaces of A15 bags compared to the smooth surfaces. After 7 days of storage in A15 bags, PLTs showed similar metabolite levels, pH, and response capacity in the bags with different orientation and more PLT adhesion and aggregation was observed on rough surfaces. CONCLUSION: Higher bacterial adhesion on rough surfaces can contribute to missed detection of bacterial strains that tend to adhere on surfaces. PLT adhesion and aggregation on rough surfaces can affect the quality and safety of PLTs by promoting more bacterial adhesion and biofilm formation on surfaces.
Assuntos
Aderência Bacteriana , Adesividade Plaquetária , Embalagem de Produtos/normas , Biofilmes/crescimento & desenvolvimento , Preservação de Sangue , Humanos , Agregação Plaquetária , Staphylococcus epidermidis/citologia , Propriedades de Superfície , Fatores de TempoRESUMO
In order to design antithrombotic implants, the effect of extreme wettability (superhydrophilicity to superhydrophobicity) on the biocompatibility of the metallic substrates (stainless steel and titanium) was investigated. The wettability of the surface was altered by chemical treatments and laser ablation methods. The chemical treatments generated different functionality groups and chemical composition as evident from XPS analysis. The micro/nanopatterning by laser ablation resulted in three different pattern geometry and different surface roughness and consequently wettability. The patterned surface were further modified with chemical treatments to generate a wide range of surface wettability. The influence of chemical functional groups, pattern geometry, and surface wettability on protein adsorption and platelet adhesion was studied. On chemically treated flat surfaces, the type of hydrophilic treatment was shown to be a contributing factor that determines the platelet adhesion, since the hydrophilic oxidized substrates exhibit less platelet adhesion in comparison to the control untreated or acid treated surfaces. Also, the surface morphology, surface roughness, and superhydrophobic character of the surfaces are contributing factors to platelet adhesion on the surface. Our results show that superhydrophobic cauliflower-like patterns are highly resistant to platelet adhesion possibly due to the stability of Cassie-Baxter state for this pattern compared to others. Our results also show that simple surface treatments on metals offer a novel way to improve the hemocompatibility of metallic substrates.
Assuntos
Plaquetas , Adesividade Plaquetária , Propriedades de Superfície , MolhabilidadeRESUMO
Undesirable host response is responsible for the surface induced thrombus generation, activation of the complement system and the inflammatory reactions by the blood-contacting biomaterials. The surface interaction of biomaterials with different blood components is thought to be the critical factor that dictates the host response to biomaterials. Surface engineering can be utilized as a method to enhance the biocompatibility and tailor the biological response to biomaterials. This review provides a brief account of various polymer brush based approaches used for biomaterials surface modification, both passive and bioactive, to make the material surfaces biocompatible and antibacterial. Initially we discuss the utilization of polymer brushes with different structure and chemistry as a novel strategy to design the surface non-fouling that passively prevent the subsequent biological responses. Further we explore the utility of different bioactive agents including peptides, carbohydrates and proteins which can be conjugated the polymer brush to make the surface actively interact with the body and modulate the host response. A number of such avenues have also been explored in this review.
Assuntos
Materiais Biocompatíveis/química , Polímeros/química , Antibacterianos/química , Propriedades de SuperfícieRESUMO
In this highlight, we discuss the current strategies for developing infection-resistant biomaterials by making them non-fouling, bactericidal or both. We focus on approaches that have used polymer brush systems by providing examples of hydrophilic non-fouling polymer brushes, those that incorporated bactericidal agents (antibiotics, antimicrobial peptides and proteins) and synthetic polyelectrolyte polymer brushes. We discuss the most important research reported in recent years and deliberate their merits, future potential and further developments required. Initially we give a brief account on the use of anti-adhesive hydrophilic polymer brushes as bacteria-resistant surfaces and their potential utility in short term applications. The importance of the chemistry and physical properties of the brushes is highlighted along with the need for the development of bactericidal coatings. Further, recent developments involving bactericide-releasing and contact killing coatings are discussed. Approaches based on antimicrobial peptide conjugated polymer brushes, those incorporating enzymes (e.g. lysozyme), viruses and chemical functionalities (polyelectrolytes) that can kill bacteria are highlighted. As an important criterion for the in vivo application of infection-resistant coatings, the biocompatibility of the modified surfaces is briefly discussed in each section. The covalent attachment, availability of multitude of functionalities for further modification, ability to alter the physical structure of the coating, biocompatibility, potential application to various biomedical surfaces and the robust mechanical properties of polymer brush systems make them ideal for further development as a novel surface coating to address biomaterial-associated infections.