The pressure sensitivity of wrinkled B-doped nanocrystalline diamond membranes.

Nanocrystalline diamond (NCD) membranes are promising candidates for use as sensitive pressure sensors. NCD membranes are able to withstand harsh conditions and are easily fabricated on glass. In this study the sensitivity of heavily boron doped NCD (B:NCD) pressure sensors is evaluated with respect to different types of supporting glass substrates, doping levels and membrane sizes. Higher pressure sensing sensitivities are obtained for membranes on Corning Eagle 2000 glass, which have a better match in thermal expansion coefficient with diamond compared to those on Schott AF45 glass. In addition, it is shown that larger and more heavily doped membranes are more sensitive. After fabrication of the membranes, the stress in the B:NCD films is released by the emergence of wrinkles. A better match between the thermal expansion coefficient of the NCD layer and the underlying substrate results in less stress and a smaller amount of wrinkles as confirmed by Raman spectroscopy and 3D surface imaging.

Pick-up and drop transfer of diamond nanosheets.

Nanocrystalline diamond (NCD) is a promising material for electronic and mechanical micro- and nanodevices. Here we introduce a versatile pick-up and drop technique that makes it possible to investigate the electrical, optical and mechanical properties of as-grown NCD films. Using this technique, NCD nanosheets, as thin as 55 nm, can be picked-up from a growth substrate and positioned on another substrate. As a proof of concept, electronic devices and mechanical resonators are fabricated and their properties are characterized. In addition, the versatility of the method is further explored by transferring NCD nanosheets onto an optical fiber, which allows measuring its optical absorption. Finally, we show that NCD nanosheets can also be transferred onto two-dimensional crystals, such as MoS2, to fabricate heterostructures. Pick-up and drop transfer enables the fabrication of a variety of NCD-based devices without requiring lithography or wet processing.

Organophosphonate biofunctionalization of diamond electrodes.

The modification of the diamond surface with organic molecules is a crucial aspect to be considered for any bioapplication of this material. There is great interest in broadening the range of linker molecules that can be covalently bound to the diamond surface. In the case of protein immobilization, the hydropathicity of the surface has a major influence on the protein conformation and, thus, on the functionality of proteins immobilized at surfaces. For electrochemical applications, particular attention has to be devoted to avoid that the charge transfer between the electrode and the redox center embedded in the protein is hindered by a thick insulating linker layer. This paper reports on the grafting of 6-phosphonohexanoic acid on OH-terminated diamond surfaces, serving as linkers to tether electroactive proteins onto diamond surfaces. X-ray photoelectron spectroscopy (XPS) confirms the formation of a stable layer on the surface. The charge transfer between electroactive molecules and the substrate is studied by electrochemical characterization of the redox activity of aminomethylferrocene and cytochrome c covalently bound to the substrate through this linker. Our work demonstrates that OH-terminated diamond functionalized with 6-phosphonohexanoic acid is a suitable platform to interface redox-proteins, which are fundamental building blocks for many bioelectronics applications.

Functionalization of boron-doped nanocrystalline diamond with N3 dye molecules.

N3 dye molecules [cis-bis(isothiocyanato)bis(2,2'-bipyridyl-4,4'-dicarboxylato)ruthenium(II)] are covalently attached to boron-doped nanocrystalline diamond (B:NCD) thin films through a combination of coupling chemistries, i.e., diazonium, Suzuki, and EDC-NHS. X-ray and ultraviolet photoelectron spectroscopy and near-edge X-ray absorption fine structure spectroscopy are used to verify the covalent bonding of the dye on the B:NCD surface (compared to a hydrogen-terminated reference). The spectroscopic results confirm the presence of a dense N3 chromophore layer, and the positions of the frontier orbitals of the dye relative to the band edge of the B:NCD thin film are inferred as well. Proof-of-concept photoelectrochemical measurements show a strong increase in the photocurrent compared to non-dye-functionalized B:NCD films. This study opens up the possibility of applying N3-sensitized B:NCD thin films as hole conductors in dye-sensitized solar cells.

Hydrogen termination of CVD diamond films by high-temperature annealing at atmospheric pressure.

A high-temperature procedure to hydrogenate diamond films using molecular hydrogen at atmospheric pressure was explored. Undoped and doped chemical vapour deposited (CVD) polycrystalline diamond films were treated according to our annealing method using a H2 gas flow down to ~50 ml∕min (STP) at ~850 °C. The films were extensively evaluated by surface wettability, electron affinity, elemental composition, photoconductivity, and redox studies. In addition, electrografting experiments were performed. The surface characteristics as well as the optoelectronic and redox properties of the annealed films were found to be very similar to hydrogen plasma-treated films. Moreover, the presented method is compatible with atmospheric pressure and provides a low-cost solution to hydrogenate CVD diamond, which makes it interesting for industrial applications. The plausible mechanism for the hydrogen termination of CVD diamond films is based on the formation of surface carbon dangling bonds and carbon-carbon unsaturated bonds at the applied tempera-ture, which react with molecular hydrogen to produce a hydrogen-terminated surface.

Thin conductive diamond films as beam intensity monitors for soft x-ray beamlines.

Quantitative analysis of X-ray absorption and dichroism data requires knowledge of the beamline photon flux during the measurements. We show that thin conductive (B-doped) diamond thin films can be an alternative to the widely used gold meshes for monitoring the beam intensity of soft X-ray beamlines in situ. Limited by the carbon extended x-ray absorption fine structure oscillations, the diamond films become applicable beginning from about 600 eV photon energy, where the important transition metal edges and the rare-earth edges are found. The 100 nm and 250 nm thick free-standing diamond films were grown and tested against standard gold meshes in real-life dichroism experiments performed at beamline ID08 of the European Synchrotron Radiation Facility, Grenoble, France. Quantitative agreement was found between the two experimental data sets. The films feature an extremely high transmission of about 90% and, at the same time, yield a sufficiently strong and clean reference signal. Furthermore, the thin films do not affect the shape of the transmitted beam. X-rays passing mesh-type monitors are subject to diffraction effects, which widen the beam and become particularly disturbing for small beamsizes in the micrometer range.

Reusable chromium-coated quartz crystal microbalance for immunosensing.

The application of oxidized chromium as a reusable platform for the development of immunosensors is presented. Chromium films were deposited on quartz crystal microbalances to study the affinity interaction between rabbit immunoglobulin G (IgG) and goat anti-rabbit IgG. A covalent approach, based on the silane chemistry, was followed for the grafting of either the rabbit IgG or the anti-rabbit IgG on the silane-modified chromium surface. Next the differences between the deposition of rabbit IgG on immobilized anti-rabbit IgG and the deposition of anti-rabbit IgG on immobilized rabbit IgG were investigated. The chromium layer could be reused between experiments, after the proper removal of the organic layers with piranha etch, obtaining a high repeatability in the steps of the functionalization protocol.

Rapid assessment of the stability of DNA duplexes by impedimetric real-time monitoring of chemically induced denaturation.

In this article, we report on the electronic monitoring of DNA denaturation by NaOH using electrochemical impedance spectroscopy in combination with fluorescence imaging as a reference technique. The probe DNA consisting of a 36-mer fragment was covalently immobilized on nanocrystalline-diamond electrodes and hybridized with different types of 29-mer target DNA (complementary, single-nucleotide defects at two different positions, and a non-complementary random sequence). The mathematical separation of the impedimetric signals into the time constant for NaOH exposure and the intrinsic denaturation-time constants gives clear evidence that the denaturation times reflect the intrinsic stability of the DNA duplexes. The intrinsic time constants correlate with calculated DNA-melting temperatures. The impedimetric method requires minimal instrumentation, is label-free and fast with a typical time scale of minutes and is highly reproducible. The sensor electrodes can be used repetitively. These elements suggest that the monitoring of chemically induced denaturation at room temperature is an interesting approach to measure DNA duplex stability as an alternative to thermal denaturation at elevated temperatures, used in DNA-melting experiments and single nucleotide polymorphism (SNP) analysis.

Topographical and functional characterization of the ssDNA probe layer generated through EDC-mediated covalent attachment to nanocrystalline diamond using fluorescence microscopy.

The covalent attachment method for DNA on nanocrystalline diamond (NCD), involving the introduction of COOH functionalities on the surface by photoattachment of 10-undecenoic acid (10-UDA), followed by the 1-ethyl-3-(3-dimethylaminopropyl)-carbodiimide (EDC)-mediated coupling to NH 2-labeled ssDNA, is evaluated in terms of stability, density, and functionality of the resulting biological interface. This is of crucial importance in DNA biosensor development. The covalent nature of DNA attachment will infer the necessary stability and favorable orientation to the ssDNA probe molecules. Using confocal fluorescence microscopy, the influence of buffer type for the removal of excess 10-UDA and ssDNA, the probe ssDNA length, the probe ssDNA concentration, and the presence of the COOH-linker on the density and functionality of the ssDNA probe layer were investigated. It was determined that the most homogeneously dense and functional DNA layer was obtained when 300 pmol of short ssDNA was applied to COOH-modified NCD samples, while H-terminated NCD was resistant for DNA attachment. Exploiting this surface functionality dependence of the DNA attachment efficiency, a shadow mask was applied during the photochemical introduction of the COOH-functionalities, leaving certain regions on the NCD H-terminated. The subsequent DNA attachment resulted in a fluorescence pattern corresponding to the negative of the shadow mask. Finally, NCD surfaces covered with mixtures of the 10-UDA linker molecule and a similar molecule lacking the COOH functionality, functioning as a lateral spacer, were examined for their suitability in preventing nonspecific adsorption to the surface and in decreasing steric hindrance. However, purely COOH-modified NCD samples, patterned with H-terminated regions and treated with a controlled amount of probe DNA, proved the most efficient in fulfilling these tasks.

Towards a real-time, label-free, diamond-based DNA sensor.

Most challenging in the development of DNA sensors is the ability to distinguish between fully complementary target ssDNA (single-strand DNA) and 1-mismatch ssDNA. To deal with this problem, we performed impedance spectroscopy on DNA-functionalized nanocrystalline diamond (NCD) layers during hybridization and denaturation. In both reactions, a difference in behavior was observed for 1-mismatch target DNA and complementary target DNA in real-time. During real-time hybridization, a decrease of the impedance was observed at lower frequencies when the complementary target DNA was added, while the addition of 1-mismatch target ssDNA caused no significant change. Fitting these results to an electrical circuit demonstrates that this is correlated with a decrease of the depletion zone in the space charge region of the diamond. During real-time denaturation, differentiation between 1-mismatch and complementary target DNA was possible at higher frequencies. Denaturation of complementary DNA showed the longest exponential decay time of the impedance, while the decay time during 1-mismatch denaturation was the shortest. The real-time hybridization and denaturation experiments were carried out on different NCD samples in various buffer solutions at temperatures between 20 and 80 degrees C. It was revealed that the best results were obtained using a Microhyb hybridization buffer at 80 degrees C and 10x PCR buffer at 30 degrees C for hybridization and 0.1 M NaOH at temperatures above 40 degrees C for denaturation. We demonstrate that the combination of real-time hybridization spectra and real-time denaturation spectra yield important information on the type of target. This approach may allow a reliable identification of the mismatch sequence, which is the most biologically relevant.

EDC-mediated DNA attachment to nanocrystalline CVD diamond films.

Chemical vapour deposited (CVD) diamond is a very promising material for biosensor fabrication owing both to its chemical inertness and the ability to make it electrical semiconducting that allows for connection with integrated circuits. For biosensor construction, a biochemical method to immobilize nucleic acids to a diamond surface has been developed. Nanocrystalline diamond is grown using microwave plasma-enhanced chemical vapour deposition (MPECVD). After hydrogenation of the surface, 10-undecenoic acid, an omega-unsaturated fatty acid, is tethered by 254 nm photochemical attachment. This is followed by 1-ethyl-3-[3-dimethylaminopropyl]carbodiimide (EDC)-mediated attachment of amino (NH(2))-modified dsDNA. The functionality of the covalently bound dsDNA molecules is confirmed by fluorescence measurements, PCR and gel electrophoresis during 35 denaturation and rehybridisation steps. The linking method after the fatty acid attachment can easily be applied to other biomolecules like antibodies and enzymes.