RESUMO
Activated carbon is an attractive adsorbent for capturing various environmental pollutants, including CO2. Herein, an optimal synthesis and impressive performance of activated carbon made from Balanites aegyptiaca (Desert date) seed shells is reported, which is an abundant agricultural waste in the Middle East and Africa. The synthesis route involved pretreating the biomass with KOH and heating it under a suitable temperature profile. An optimal KOH-to-biomass ratio and multi-stage carbonization yielded activated carbon with a surface area above 3000â m2/g and an average pore size of nearly 4.1â nm. At 0 °C, this activated carbon exhibited CO2 uptake of 11.3â mmol g-1 that surpassed the uptake capacity of previously reported activated carbons. The selectivity towards CO2 was also found to be significantly higher compared to other gases. Thus, the present approach demonstrates an efficient conversion of agricultural waste to activated carbon for capturing CO2 and other environmental contaminants.
RESUMO
Developing efficient, lightweight, and durable all-solid-state supercapacitors is crucial for future energy storage systems. The study focuses on optimizing electrode materials to achieve high capacitance and stability. This study introduces a novel two-step pyrolysis process to synthesize activated carbon nanosheets from jute sticks (JAC), resulting in an optimized JAC-2 material with a high yield (≈24%) and specific surface area (≈2600 m2 g-1). Furthermore, an innovative in situ synthesis approach is employed to synthesize hybrid nanocomposites (NiCoLDH-1@JAC-2) by integrating JAC nanosheets with nickel-cobalt-layered double hydroxide nanoflowers (NiCoLDH). These nanocomposites serve as positive electrode materials and JAC-2 as the negative electrode material in all-solid-state asymmetric hybrid supercapacitors (HSCs), exhibiting remarkable performance metrics. The HSCs achieve a specific capacitance of 750 F g-1, a specific capacity of 209 mAh g-1 (at 0.5 A g-1), and an energy density of 100 Wh kg-1 (at 250 W kg-1) using PVA/KOH solid electrolyte, while maintaining outstanding cyclic stability. Importantly, a density functional theory framework is utilized to validate the experimental findings, underscoring the potential of this novel approach for enhancing HSC performance and enabling the large-scale production of transition metal-based layered double hydroxides.
RESUMO
In this work, microcrystalline cellulose (MCC) was isolated from jute sticks and sodium carboxymethyl cellulose (Na-CMC) was synthesized from the isolated MCC. Na-CMC is an anionic derivative of microcrystalline cellulose. The microcrystalline cellulose-based hydrogel (MCCH) and Na-CMC-based hydrogel (Na-CMCH) were prepared by using epichlorohydrin (ECH) as a crosslinker by a chemical crosslinking method. The isolated MCC, synthesized Na-CMC, and corresponding hydrogels were characterized by Fourier transform infrared (FTIR), X-ray diffraction (XRD), scanning electronic microscopy (SEM), and energy dispersive spectroscopy (EDS) for functional groups, crystallinity, surface morphology, and composite elemental composition, respectively. Pseudo-first-order, pseudo-second-order, and Elovich models were used to investigate the adsorption kinetics. The pseudo-second-order one is favorable for both hydrogels. Freundlich, Langmuir, and Temkin adsorption isotherm models were investigated. MCCH follows the Freundlich model (R2 = 0.9967), and Na-CMCH follows the Langmuir isotherm model (R2 = 0.9974). The methylene blue (MB) dye adsorption capacities of ionic (Na-CMCH) and nonionic (MCCH) hydrogels in different contact times (up to 600 min), initial concentrations (10-50 ppm), and temperatures (298-318 K) were investigated and compared. The maximum adsorption capacity of MCCH and Na-CMCH was 23.73 and 196.46 mg/g, respectively, and the removal efficiency of MB was determined to be 26.93% for MCCH and 58.73% for Na-CMCH. The Na-CMCH efficiently removed the MB from aqueous solutions as well as spiked industrial wastewater. The Na-CMCH also remarkably efficiently reduced priority metal ions from an industrial effluent. An effort has been made to utilize inexpensive, readily available, and environmentally friendly waste materials (jute sticks) to synthesize valuable adsorbent materials.
RESUMO
Three-dimensional printing (3DP), known as additive layer manufacturing (ALM), is a manufacturing process in which a three-dimensional structure is constructed by successive addition of deposited layers. Fused Deposition Modeling (FDM) has evolved as the most frequently utilized ALM process because of its cost-effectiveness and ease of operation. Nevertheless, layer adhesion, delamination, and quality of the finished product remain issues associated with the FDM process parameters. These issues need to be addressed in order to satisfy the requirements commonly imposed by the conventional manufacturing industry. This work is focused on the optimization of the FDM process and post-process parameters for Polylactic acid (PLA) samples in an effort to maximize their tensile strength. Infill density and pattern type, layer height, and print temperature are the process parameters, while annealing temperature is the post-process parameter considered for the investigation. Analysis based on the Taguchi L18 orthogonal array shows that the gyroid infill pattern and annealing cycle at 90 °C results in a maximum ultimate tensile strength (UTM) of 37.15 MPa. Furthermore, the regression model developed for the five variables under study was able to predict the UTS with an accuracy of more than 96%.
RESUMO
A simple and scalable method to fabricate a novel high-energy asymmetric supercapacitor using tomato-leaf-derived hierarchical porous activated carbon (TAC) and electrochemically deposited polyaniline (PANI) for a battery-free heart-pulse-rate monitor is reported. In this study, TAC is prepared by simple pyrolysis, exhibiting nanosheet-type morphology and a high specific surface area of ≈1440 m2 g-1 , and PANI is electrochemically deposited onto carbon cloth. The TAC- and PANI- based asymmetric supercapacitor demonstrates an electrochemical performance superior to that of symmetric supercapacitors, delivering a high specific capacitance of 248 mF cm-2 at a current density of 1.0 mA cm-2 . The developed asymmetric supercapacitor shows a high energy density of 270 µWh cm-2 at a power density of 1400 µW cm-2 , as well as an excellent cyclic stability of ≈95% capacitance retention after 10 000 charging-discharging cycles while maintaining ≈98% Coulombic efficiency. Impressively, the series-connected asymmetric supercapacitors can operate a battery-free heart-pulse-rate monitor extremely efficiently upon solar-panel charging under regular laboratory illumination.
RESUMO
Mixed Matrix Membranes (MMM) with enhanced selectivity and permeability are preferred for gas separations. The porous metal-organic frameworks (MOFs) materials incorporated in them play a crucial part in improving the performance of MMM. In this study, Zeolitic imidazolate frameworks (ZIF-90) are selected to fabricate Polyetherimide (PEI) MMMs owing to their lucrative structural and chemical properties. This work reports new controlled post-synthetic modifications of ZIF-90 (50-PSM-ZIF-90) with ethanolamine to control the diffusion and uptake of CO2. Physical and chemical properties of ZIF-90, such as stability and presence of aldehyde functionality in the imidazolate linker, allow for easy modulation of the ZIF-90 pores and window size to tune the gas transport properties across ZIF-90-based membranes. Effects of these materials were investigated on the performance of MMMs and compared with pure PEI membranes. Performance of the MMMs was evaluated in terms of permeability of different gases and selective separation of CO2 and H2 gas. Results presented that the permeability of all membranes was in the following order, i.e., P(H2) > P(CO2) > P(O2) > P(CH4) > P(C2H6) > P(C3H8) > P(N2), demonstrating that kinetic gas diffusion is the predominant gas transport mode in these membranes. Among all the membranes, permeability of pure PEI membrane was highest for all gases due to the uniform porous morphology. The pure PEI membrane showed highest permeability of H2, which is 486.5 Barrer, followed by 49 Barrer for O2, 29 Barrer for N2, 142 Barrer for CO2, 41 Barrer for CH4, 40 Barrer for C2H6 and 39.6 Barrer for C3H8. Results also confirm the superiority of controlled PSM-ZIF-90-PEI membrane over the pure PEI and ZIF-90-PEI membranes in CO2 and H2 separation performance. The 50-PSM-ZIF-90 PEI membrane exhibited a 20% increase in CO2 separation from methane and a 26% increase over nitrogen compared to the ZIF-90-PEI membrane. The 50-PSM-ZIF-90 PEI membrane showed 15% more H2/O2 separation and 9% more H2/CH4 separation than ZIF-90 PEI membrane. Overall, this study represents the role of controlled PSM in enhancing the property of new materials like ZIF and its application in MMMs fabrication to develop a promising approach for the CO2 capture and separation.
RESUMO
α-SiAlON is commonly used to machine superalloys owing to its desirable thermal and structural properties. α-SiAlON is among the crystalline forms of SiAlON and has more favorable properties than ß-SiAlON. However, it becomes fragile during the machining of hard-to-cut materials due to its low fracture toughness and machinability. Recent research efforts focus on improving the thermal and structural properties of α-SiAlON using suitable dopants, nano-sized precursors, and the addition of metallic/ceramic reinforcement particles. The present study presents a material-by-design approach to designing and developing ceramic and metal-particle-reinforced Ca-α-SiAlON composites with properties tailored for the cutting tool applications. The mean-field homogenization theories and effective medium approximations implemented in an in-house code are used to effectively optimize the thermal and structural properties of the Ca-α-SiAlON composite by varying essential parameters such as inclusion material, volume fraction, porosity, particulate size, and thermal interface resistance. Individual properties of the matrix and reinforcements are considered in the computations of effective properties such as thermal conductivity, thermal expansion coefficient, modulus of elasticity, and fracture toughness. The main objective of the study is to enhance the thermal conductivity and fracture toughness of Ca-α-SiAlON, while lowering its thermal expansion coefficient. At the same time, the elastic modulus and hardness/strength must be maintained within an acceptable range. As a validation, Ni/Ca-α-SiAlON and SiC/Ca-α-SiAlON composites are synthesized from the nano-sized precursors, CaO dopant, and Ni/SiC microparticles via spark plasma sintering (SPS) process. The thermal conductivity, coefficient of thermal expansion, and elastic modulus of the composites are measured and compared with the computational predictions. The computational predictions are found to be comparable to that of the experimental measurements. Moreover, the studies show that WC, SiC, and Cr can be suitable reinforcement materials for enhancing the thermal and structural properties of Ca-α-SiAlON material for the cutting tool inserts.
RESUMO
Over the past few years, the environmentally friendly synthesis of nanomaterials, including graphene using green chemistry, has attracted tremendous attention due to its easy handling, low cost, and biocompatibility. Here we demonstrate a facile and efficient green synthesis route for producing highly stable and electrochemically active three-dimensional interconnected graphene frameworks (3DIGF) from jute sticks. Initially, jute sticks derived three-dimensional amorphous activated carbon nanosheets (3DAACNs) were prepared at low temperatures (i. e., 850 °C) in an inert environment. The resultant 3DAACNs were then heat treated at a high temperature (i. e., 2700 °C) under an inert environment, resulting in 3DIGF. The prepared carbonaceous materials were fully characterized, and various experimental techniques confirmed the preparation of 3DIGF. The prepared 3DIGF shows a highly stable nature in thermal and chemical environments and demonstrates a highly dynamic nature for the electrooxidation of sulfide. This study could be considered a vital contribution towards the economic and simple approach for preparing 3DIGF from biomass.
Assuntos
Grafite , Biomassa , Grafite/químicaRESUMO
For effective cutting tool inserts that absorb thermal shock at varying temperature gradients, improved thermal conductivity and toughness are required. In addition, parameters such as the coefficient of thermal expansion must be kept within a reasonable range. This work presents a novel material design framework based on a multi-scale modeling approach that proposes nickel (Ni)-reinforced alumina (Al2O3) composites to tailor the mechanical and thermal properties required for ceramic cutting tools by considering numerous composite parameters. The representative volume elements (RVEs) are generated using the DREAM.3D software program and the output is imported into a commercial finite element software ABAQUS. The RVEs which contain multiple Ni particles with varying porosity and volume fractions are used to predict the effective thermal and mechanical properties using the computational homogenization methods under appropriate boundary conditions (BCs). The RVE framework is validated by the sintering of Al2O3-Ni composites in various compositions. The predicted numerical results agree well with the measured thermal and structural properties. The properties predicted by the numerical model are comparable with those obtained using the rules of mixtures and SwiftComp, as well as the Fast Fourier Transform (FFT) based computational homogenization method. The results show that the ABAQUS, SwiftComp and FFT results are fairly close to each other. The effects of porosity and Ni volume fraction on the mechanical and thermal properties are also investigated. It is observed that the mechanical properties and thermal conductivities decrease with the porosity, while the thermal expansion remains unaffected. The proposed integrated modeling and empirical approach could facilitate the development of unique Al2O3-metal composites with the desired thermal and mechanical properties for ceramic cutting inserts.
RESUMO
This study aimed to fabricate nano-hydroxyapatite (nHA) grafted/non-grafted E-glass-fiber-based (nHA/EG) and E-glass fiber (EG) orthodontic retainers and to compare their properties with commercially available retainers. Stainless-steel (SS) retainers and everStick Ortho (EST) were used as control groups. The retainers were evaluated with Raman spectroscopy and bonded to bovine teeth. The samples were fatigued under cyclic loading (120,000 cycles) followed by static load testing. The failure behavior was evaluated under an optical microscope and scanning electron microscope. The strain growth on the orthodontic retainers was assessed (48h and 168h) by an adhesion test using Staphylococcus aureus and Candida albicans. The characteristic peaks of resin and glass fibers were observed, and the debonding force results showed a significant difference among all of the groups. SS retainers showed the highest bonding force, whereas nHA/EG retainers showed a non-significant difference from EG and EST retainers. SS retainers' failure mode occurred mainly at the retainer-composite interface, while breakage occurred in glass-fiber-based retainers. The strains' adhesion to EST and EG was reduced with time. However, it was increased with nHA/EG. Fabrication of nHA/EG retainers was successfully achieved and showed better debonding force compared to other glass-fiber-based groups, whereas non-linear behavior was observed for the strains' adhesion.
RESUMO
Green enhanced oil recovery (GEOR) is an environmentally friendly enhanced oil recovery (EOR) process involving the injection of green fluids to improve macroscopic and microscopic sweep efficiencies while boosting tertiary oil production. Carbon nanomaterials such as graphene, carbon nanotube (CNT), and carbon dots have gained interest for their superior ability to increase oil recovery. These particles have been successfully tested in EOR, although they are expensive and do not extend to GEOR. In addition, the application of carbon particles in the GEOR method is not well understood yet, requiring thorough documentation. The goals of this work are to develop carbon nanoparticles from biomass and explore their role in GEOR. The carbon nanoparticles were prepared from date leaves, which are inexpensive biomass, through pyrolysis and ball-milling methods. The synthesized carbon nanomaterials were characterized using the standard process. Three formulations of functionalized and non-functionalized date-leaf carbon nanoparticle (DLCNP) solutions were chosen for core floods based on phase behavior and interfacial tension (IFT) properties to examine their potential for smart water and green chemical flooding. The carboxylated DLCNP was mixed with distilled water in the first formulation to be tested for smart water flood in the sandstone core. After water flooding, this formulation recovered 9% incremental oil of the oil initially in place. In contrast, non-functionalized DLCNP formulated with (the biodegradable) surfactant alkyl polyglycoside and NaCl produced 18% more tertiary oil than the CNT. This work thus provides new green chemical agents and formulations for EOR applications so that oil can be produced more economically and sustainably.
RESUMO
Energy-levels well-matched direct Z-scheme ZnNiNdO/CdS heterojunction was successfully fabricated using facile co-precipitation and ultra-sonication techniques and characterized with XRD, FTIR, Raman, PL, UV-vis, and FE-SEM. The XRD diffractograms confirmed the co-doping of Ni-Nd in ZnO and the formation of heterostructured nanocomposite. FTIR and Raman data showed the presence of metal-oxygen vibration and optical phonon modes of ZnO and CdS. FE-SEM images exhibited the network type morphology. The energy bandgap was redshifted by co-doping (3.37-2.9 eV) and was further reduced (2.6 eV) by making a composite with CdS. The ZnNiNdO/CdS catalyst degraded 99.7, 49, 96.6, 98.6, and 98.6% methylene blue (MB), p-nitroaniline (P-Nitro), methyl orange (MO), methyl red (MR), and rhodamine B (RhB) dyes under 50 min sunlight irradiation. Moreover, ZnNiNdO/CdS showed intense inhibition activity towards Staphylococcus aureus, Escherichia coli, Proteus vulgaris, and Pseudomonas aeruginosa bacterial strains with maximum inhibition zone diameters 30, 33, 27, and 31 mm, respectively. The synergistic effects arising from band alignment can lead to efficient vectorial charge separation, transportation, and lower recombination of photoinduced charge carriers, ultimately boosting photocatalytic and antibacterial performance. The ZnNiNdO/CdS photocatalyst has higher stability up to the 7th cycle towards MB dye with ~ 5% deficit in degradation efficiency. The higher generation of superoxide and hydroxyl radical was confirmed by species trapping experiments responsible for photodegradation of dyes molecules. Furthermore, the results showed that the photocatalytic and antibacterial performance of pristine ZnO can be enhanced by co-doping and tuning energy bandgap.
Assuntos
Poluentes Ambientais , Óxido de Zinco , Antibacterianos/farmacologia , Corantes/farmacologia , Desinfecção , Poluentes Ambientais/farmacologia , Escherichia coli , Azul de Metileno , Águas Residuárias , Óxido de Zinco/farmacologiaRESUMO
Due to rapid technological advancements, the demand for lightweight materials with improved tribo-mechanical properties is continuously growing. The development of composite materials is one of the routes taken by researchers to meet these target properties. Aluminum (Al) is one of the most suitable materials used for developing composites for a wide range of applications because of its light weight, high conductivity, and high specific strength. In this study, aluminum hybrid nanocomposites with alumina (10 Vol% Al2O3) and varying loadings of graphene oxide (0.25, 0.5 and 1 wt% GO) were fabricated using the spark plasma sintering technique. The tribological properties of the developed hybrid composites were evaluated by conducting ball-on-disk wear tests at a normal load of 3N, with a sliding speed of 0.1 m/s, and for a sliding distance of 100 m. A 440C hardened stainless steel ball with a diameter of 6.3 mm and a hardness of 62 RC was used as a counterface. Scanning electron microscopy (SEM), elemental X-ray dispersive analysis (EDS), and optical profilometry were used to ascertain the involved wear mechanisms. The results revealed that Al-10 Vol%Vol% Al2O3-0.25 wt% GO hybrid nanocomposite showed an increase of 48% in the hardness, a reduction of 55% in the specific wear rate, and a reduction of 5% in COF compared with pure aluminum.
RESUMO
Nanoparticles prepared from bio-reduction agents are of keen interest to researchers around the globe due to their ability to mitigate the harmful effects of chemicals. In this regard, the present study aims to synthesize copper oxide nanoparticles (CuO NPs) by utilizing root extracts of ginger and garlic as reducing agents, followed by the characterization and evaluation of their antimicrobial properties against multiple drug resistant (MDR) S. aureus. In this study, UV-vis spectroscopy revealed a reduced degree of absorption with an increase in the extract amount present in CuO. The maximum absorbance for doped NPs was recorded around 250 nm accompanying redshift. X-ray diffraction analysis revealed the monoclinic crystal phase of the particles. The fabricated NPs exhibited spherical shapes with dense agglomeration when examined with FE-SEM and TEM. The crystallite size measured by using XRD was found to be within a range of 23.38-46.64 nm for ginger-doped CuO and 26-56 nm for garlic-doped CuO. Green synthesized NPs of ginger demonstrated higher bactericidal tendencies against MDR S. aureus. At minimum and maximum concentrations of ginger-doped CuO NPs, substantial inhibition areas for MDR S. aureus were (2.05-3.80 mm) and (3.15-5.65 mm), and they were measured as (1.1-3.55 mm) and (1.25-4.45 mm) for garlic-doped NPs. Conventionally available CuO and crude aqueous extract (CAE) of ginger and garlic roots reduced MB in 12, 21, and 38 min, respectively, in comparison with an efficient (100%) reduction of dye in 1 min and 15 s for ginger and garlic doped CuO NPs.
Assuntos
Nanopartículas Metálicas , Nanopartículas , Zingiber officinale , Animais , Antibacterianos/química , Antibacterianos/farmacologia , Bovinos , Cobre/química , Cobre/farmacologia , Nanopartículas Metálicas/química , Testes de Sensibilidade Microbiana , Nanopartículas/química , Extratos Vegetais/farmacologia , Staphylococcus aureusRESUMO
The fabrication of smart, efficient, and innovative devices critically needs highly refined thin-film nanomaterials; therefore, facile, scalable, and economical methods of thin films production are highly sought-after for the sustainable growth of the hi-tech industry. The chemical vapor deposition (CVD) technique is widely implemented at the industrial level due to its versatile features. However, common issues with a precursor, such as reduced volatility and thermal stability, restrict the use of CVD to produce novel and unique materials. A modified CVD approach, named aerosol-assisted CVD (AACVD), has been the center of attention due to its remarkable tendency to fabricate uniform, homogenous, and distinct nano-architecture thin films in an uncomplicated and straightforward manner. Above all, AACVD can utilize any custom-made or commercially available precursors, which can be transformed into a transparent solution in a common organic solvent; thus, a vast array of compounds can be used for the formation of nanomaterial thin films. This review article highlights the importance of AACVD in fabricating heterobimetallic oxide thin films and their potential in making energy production (e. g., photoelectrochemical water splitting), energy storage (e. g., supercapacitors), and environmental protection (e. g., electrochemical sensors) devices. A heterobimetallic oxide system involves two metallic species either in a composite, solid solution, or metal-doped metal oxides. Moreover, the AACVD tunable parameters, such as temperature, deposition time, and precursor, which drastically affect thin films microstructure and their performance in device applications, are also discussed. Lastly, the key challenges and issues of scaling up AACVD to the industrial level and processing for emerging functional materials are also highlighted.
RESUMO
PURPOSE: The physical and mechanical performance of a newly commercialized dental restorative material (alkasite) was compared with glass ionomer cement (GIC) and nano-hybrid composite. METHODOLOGY: Human extracted premolars were used to investigate the shear bond strength. Restorative materials were placed on the dentine surface and were aged in deionized water for 14 days. The 3-D surface roughness was evaluated before and after chewing simulation cycles (50,000). The samples were fatigued mechanically using a chewing simulator and investigated with a scanning electron microscope (SEM). RESULTS: For shear bond strength, alkasite showed significantly high values than GIC, whereas non-significant difference was observed between alkasite and nano-hybrid composite. After the chewing simulation (50,000 cycles), non-significant difference was found between GIC and nano-hybrid composite, where surface roughness values were highest for GIC and lowest for alkasite. CONCLUSION: The newly developed restorative material (alkasite) has shown better results than existing restorative materials.
RESUMO
Oxynitride glasses are not yet commercialised primarily due to the impurities present in the network of these glasses. In this work, we investigated the microstructure and instinctive defects in nitrogen rich La-Si-O-N glasses. Glasses were prepared by heating a powder mixture of pure La metal, Si3N4, and SiO2 in a nitrogen atmosphere at 1650-1800 °C. The microstructure and impurities in the glasses were examined by optical microscopy, scanning electron microscopy, atomic force microscopy, and transmission electron microscopy in conjunction with electron energy-loss spectroscopy. Analyses showed that the glasses contain a small amount of spherical metal silicide particles, mostly amorphous or poorly crystalline, and having sizes typically ranging from 1 µm and less. The amount of silicide was estimated to be less than 2 vol. %. There was no systematic relation between silicide formation and glass composition or preparation temperature. The microstructure examination revealed that the opacity of these nitrogen rich glasses is due to the elemental Si arise from the decomposition reaction of silicon nitride and silicon oxide, at a high temperature above ~1600 °C and from the metallic silicide particles formed by the reduction of silicon oxide and silicon nitride at an early stage of reaction to form a silicide intermetallic with the La metal.
RESUMO
Polysulphone (PSU) composites with carbon nanotubes (PSU-CNT) and graphene nanoplatelets (PSU-GNP) were developed through the solution casting process, using various weight load percentages of 1, 3, 5, and 10 wt% of CNT and GNP nanofillers. The microstructural and thermal properties of the PSU-based composites were compared. The microstructural characterisation of both composites (PSU-CNTs and PSU-GNPs) showed a strong matrix-filler interfacial interaction and uniform dispersion of CNTs and GNPs in the PSU matrix. The analysis demonstrated that both the thermal conductivity and effusivity improved with the increase in the weight percentage (wt%) of CNTs and GNPs because of the percolation effect. The polysulphone-based composite containing 10 wt% CNTs showed a remarkably high thermal conductivity value of 1.13 (W/m·K), which is 163% times higher than pure PSU. While the glass transition temperature (Tg) was shifted to a higher temperature, the thermal expansion was reduced in all the PSU-CNT and PSU-GNP composites. Interestingly, the CNTs allowed homogeneous distribution and a reasonably good interfacial network of interaction with the PSU matrix, leading to better microstructural characteristics and thermal properties than those of the PSU-GNP composites. The findings highlight the importance of controlling the nature, distribution, and content of fillers within the polymeric matrix.
RESUMO
Aluminum matrix composites are among the most widely used metal matrix composites in several industries, such as aircraft, electronics, automobile, and aerospace, due to their high specific strength, durability, structural rigidity and high corrosion resistance. However, owing to their low hardness and wear resistance, their usage is limited in demanding applications, especially in harsh environments. In the present work, aluminum hybrid nanocomposite reinforced with alumina (Al2O3) and graphene oxide (GO) possessing enhanced mechanical and thermal properties was developed using spark plasma sintering (SPS) technique. The focus of the study was to optimize the concentration of Al2O3 and GO content in the composite to improve the mechanical and thermal properties such as hardness, compressive strength, heat flow, and thermal expansion. The nanocomposites were characterized by FESEM, EDS, XRD and Raman spectroscopy to investigate their morphology and structural properties. In the first phase, different volume percent of alumina (10%, 20%, 30%) were used as reinforcement in the aluminum matrix to obtain (Al+X% Al2O3) composite with the best mechanical/thermal properties which was found to be 10 V% of Al2O3. In the second phase, a hybrid nanocomposite was developed by reinforcing the (Al + 10 V% Al2O3) with different weight percent (0.25%, 0.5%, 1%) of GO to obtain the optimum composition with improved mechanical/thermal properties. Results revealed that the Al\10 V% Al2O3\0.25 wt.% GO hybrid nanocomposite showed the highest improvement of about 13% in hardness and 34% in compressive strength as compared to the Al\10V% Al2O3 composite. Moreover, the hybrid nanocomposite Al\10 V% Al2O3\0.25 wt.% GO also displayed the lowest thermal expansion.
RESUMO
Transparent and amorphous yttrium (Y)/Sialon thin films were successfully fabricated using pulsed laser deposition (PLD). The thin films were fabricated in three steps. First, Y/Sialon target was synthesized using spark plasma sintering technique at 1500 °C in an inert atmosphere. Second, the surface of the fabricated target was cleaned by grinding and polishing to remove any contamination, such as graphite and characterized. Finally, thin films were grown using PLD in an inert atmosphere at various substrate temperatures (RT to 500 °C). While the X-ray diffractometer (XRD) analysis revealed that the Y/Sialon target has ß phase, the XRD of the fabricated films showed no diffraction peaks and thus confirming the amorphous nature of fabricated thin films. XRD analysis displayed that the fabricated thin films were amorphous while the transparency, measured by UV-vis spectroscopy, of the films, decreased with increasing substrate temperature, which was attributed to a change in film thickness with deposition temperature. X-ray photoelectron spectroscopy (XPS) results suggested that the synthesized Y/Sialon thin films are nearly homogenous and contained all target's elements. A scratch test revealed that both 300 and 500 °C coatings possess the tough and robust nature of the film, which can resist much harsh loads and shocks. These results pave the way to fabricate different Sialon doped materials for numerous applications.