Anillin-related Mid1 as an adaptive and multimodal contractile ring anchoring protein: A simulation study.

Cytokinesis of animal and fungi cells depends crucially on the anillin scaffold proteins. Fission yeast anillin-related Mid1 anchors cytokinetic ring precursor nodes to the membrane. However, it is unclear if both of its Pleckstrin Homology (PH) and C2 C-terminal domains bind to the membrane as monomers or dimers, and if one domain plays a dominant role. We studied Mid1 membrane binding with all-atom molecular dynamics near a membrane with yeast-like lipid composition. In simulations with the full C terminal region started away from the membrane, Mid1 binds through the disordered L3 loop of C2 in a vertical orientation, with the PH away from the membrane. However, a configuration with both C2 and PH initially bound to the membrane remains associated with the membrane. Simulations of C2-PH dimers show extensive asymmetric membrane contacts. These multiple modes of binding may reflect Mid1's multiple interactions with membranes, node proteins, and ability to sustain mechanical forces.

Design principles of Cdr2 node patterns in fission yeast cells.

Pattern-forming networks have diverse roles in cell biology. Rod-shaped fission yeast cells use pattern formation to control the localization of mitotic signaling proteins and the cytokinetic ring. During interphase, the kinase Cdr2 forms membrane-bound multiprotein complexes termed nodes, which are positioned in the cell middle due in part to the node inhibitor Pom1 enriched at cell tips. Node positioning is important for timely cell cycle progression and positioning of the cytokinetic ring. Here, we combined experimental and modeling approaches to investigate pattern formation by the Pom1-Cdr2 system. We found that Cdr2 nodes accumulate near the nucleus, and Cdr2 undergoes nucleocytoplasmic shuttling when cortical anchoring is reduced. We generated particle-based simulations based on tip inhibition, nuclear positioning, and cortical anchoring. We tested model predictions by investigating Pom1-Cdr2 localization patterns after perturbing each positioning mechanism, including in both anucleate and multinucleated cells. Experiments show that tip inhibition and cortical anchoring alone are sufficient for the assembly and positioning of nodes in the absence of the nucleus, but that the nucleus and Pom1 facilitate the formation of unexpected node patterns in multinucleated cells. These findings have implications for spatial control of cytokinesis by nodes and for spatial patterning in other biological systems.

Design principles of Cdr2 node patterns in fission yeast cells.

Pattern forming networks have diverse roles in cell biology. Rod-shaped fission yeast cells use pattern formation to control the localization of mitotic signaling proteins and the cytokinetic ring. During interphase, the kinase Cdr2 forms membrane-bound multiprotein complexes termed nodes, which are positioned in the cell middle due in part to the node inhibitor Pom1 enriched at cell tips. Node positioning is important for timely cell cycle progression and positioning of the cytokinetic ring. Here, we combined experimental and modeling approaches to investigate pattern formation by the Pom1-Cdr2 system. We found that Cdr2 nodes accumulate near the nucleus, and Cdr2 undergoes nucleocytoplasmic shuttling when cortical anchoring is reduced. We generated particle-based simulations based on tip inhibition, nuclear positioning, and cortical anchoring. We tested model predictions by investigating Pom1-Cdr2 localization patterns after perturbing each positioning mechanism, including in both anucleate and multinucleated cells. Experiments show that tip inhibition and cortical anchoring alone are sufficient for the assembly and positioning of nodes in the absence of the nucleus, but that the nucleus and Pom1 facilitate the formation of unexpected node patterns in multinucleated cells. These findings have implications for spatial control of cytokinesis by nodes and for spatial patterning in other biological systems.

Anillin Related Mid1 as an Adaptive and Multimodal Contractile Ring Anchoring Protein: A Simulation Study.

The organization of the cytokinetic ring at the cell equator of dividing animal and fungi cells depends crucially on the anillin scaffold proteins. In fission yeast, anillin related Mid1 binds to the plasma membrane and helps anchor and organize a medial broad band of cytokinetic nodes, which are the precursors of the contractile ring. Similar to other anillins, Mid1 contains a C terminal globular domain with two potential regions for membrane binding, the Pleckstrin Homology (PH) and C2 domains, and an N terminal intrinsically disordered region that is strongly regulated by phosphorylation. Previous studies have shown that both PH and C2 domains can associate with the membrane, preferring phosphatidylinositol-(4,5)-bisphosphate (PIP 2 ) lipids. However, it is unclear if they can simultaneously bind to the membrane in a way that allows dimerization or oligomerization of Mid1, and if one domain plays a dominant role. To elucidate Mid1's membrane binding mechanism, we used the available structural information of the C terminal region of Mid1 in all-atom molecular dynamics (MD) near a membrane with a lipid composition based on experimental measurements (including PIP 2 lipids). The disordered L3 loop of C2, as well as the PH domain, separately bind the membrane through charged lipid contacts. In simulations with the full C terminal region started away from the membrane, Mid1 binds through the L3 loop and is stabilized in a vertical orientation with the PH domain away from the membrane. However, a configuration with both C2 and PH initially bound to the membrane remains associated with the membrane. These multiple modes of binding may reflect Mid1's multiple interactions with membranes and other node proteins, and ability to sustain mechanical forces.

Multiple polarity kinases inhibit phase separation of F-BAR protein Cdc15 and antagonize cytokinetic ring assembly in fission yeast.

The F-BAR protein Cdc15 is essential for cytokinesis in Schizosaccharomyces pombe and plays a key role in attaching the cytokinetic ring (CR) to the plasma membrane (PM). Cdc15's abilities to bind to the membrane and oligomerize via its F-BAR domain are inhibited by phosphorylation of its intrinsically disordered region (IDR). Multiple cell polarity kinases regulate Cdc15 IDR phosphostate, and of these the DYRK kinase Pom1 phosphorylation sites on Cdc15 have been shown in vivo to prevent CR formation at cell tips. Here, we compared the ability of Pom1 to control Cdc15 phosphostate and cortical localization to that of other Cdc15 kinases: Kin1, Pck1, and Shk1. We identified distinct but overlapping cohorts of Cdc15 phosphorylation sites targeted by each kinase, and the number of sites correlated with each kinases' abilities to influence Cdc15 PM localization. Coarse-grained simulations predicted that cumulative IDR phosphorylation moves the IDRs of a dimer apart and toward the F-BAR tips. Further, simulations indicated that the overall negative charge of phosphorylation masks positively charged amino acids necessary for F-BAR oligomerization and membrane interaction. Finally, simulations suggested that dephosphorylated Cdc15 undergoes phase separation driven by IDR interactions. Indeed, dephosphorylated but not phosphorylated Cdc15 undergoes liquid-liquid phase separation to form droplets in vitro that recruit Cdc15 binding partners. In cells, Cdc15 phosphomutants also formed PM-bound condensates that recruit other CR components. Together, we propose that a threshold of Cdc15 phosphorylation by assorted kinases prevents Cdc15 condensation on the PM and antagonizes CR assembly.

Comparison of treatment recompression tables for neurologic decompression illness in swine model.

BACKGROUND: Significant reductions in ambient pressure subject an individual to risk of decompression illness (DCI); with incidence up to 35 per 10,000 dives. In severe cases, the central nervous system is often compromised (>80%), making DCI among the most morbid of diving related injuries. While hyperbaric specialists suggest initiating recompression therapy with either a Treatment Table 6 (TT6) or 6A (TT6A), the optimal initial recompression treatment for severe DCI is unknown. METHODS: Swine were exposed to an insult dive breathing air at 7.06 ATA (715.35 kPa) for 24 min followed by rapid decompression at a rate of 1.82 ATA/min (184.41 kPa/min). Swine that developed neurologic DCI within 1 hour of surfacing were block randomized to one of four United States Navy Treatment Tables (USN TT): TT6, TT6A-air (21% oxygen, 79% nitrogen), TT6A-nitrox (50% oxygen, 50% nitrogen), and TT6A-heliox (50% oxygen, 50% helium). The primary outcome was the mean number of spinal cord lesions, which was analyzed following cord harvest 24 hours after successful recompression treatment. Secondary outcomes included spinal cord lesion incidence and gross neurologic outcomes based on a pre- and post- modified Tarlov assessment. We compared outcomes among these four groups and between the two treatment profiles (i.e. TT6 and TT6A). RESULTS: One-hundred and forty-one swine underwent the insult dive, with 61 swine meeting inclusion criteria (43%). We found no differences in baseline characteristics among the groups. We found no significant differences in functional neurologic outcomes (p = 0.77 and 0.33), spinal cord lesion incidence (p = 0.09 and 0.07), or spinal cord lesion area (p = 0.51 and 0.17) among the four treatment groups or between the two treatment profiles, respectively. While the trends were not statistically significant, animals treated with TT6 had the lowest rates of functional deficits and the fewest spinal cord lesions. Moreover, across all animals, functional neurologic deficit had strong correlation with lesion area pathology (Logistic Regression, p < 0.01, Somers' D = 0.74). CONCLUSIONS: TT6 performed as well as the other treatment tables and is the least resource intensive. TT6 is the most appropriate initial treatment for neurologic DCI in swine, among the tables that we compared.

A mechanism with severing near barbed ends and annealing explains structure and dynamics of dendritic actin networks.

Single molecule imaging has shown that part of actin disassembles within a few seconds after incorporation into the dendritic filament network in lamellipodia, suggestive of frequent destabilization near barbed ends. To investigate the mechanisms behind network remodeling, we created a stochastic model with polymerization, depolymerization, branching, capping, uncapping, severing, oligomer diffusion, annealing, and debranching. We find that filament severing, enhanced near barbed ends, can explain the single molecule actin lifetime distribution, if oligomer fragments reanneal to free ends with rate constants comparable to in vitro measurements. The same mechanism leads to actin networks consistent with measured filament, end, and branch concentrations. These networks undergo structural remodeling, leading to longer filaments away from the leading edge, at the +/-35° orientation pattern. Imaging of actin speckle lifetimes at sub-second resolution verifies frequent disassembly of newly-assembled actin. We thus propose a unified mechanism that fits a diverse set of basic lamellipodia phenomenology.

Conductive Ink with Circular Life Cycle for Printed Electronics.

Electronic waste carries energetic costs and an environmental burden rivaling that of plastic waste due to the rarity and toxicity of the heavy-metal components. Recyclable conductive composites are introduced for printed circuits formulated with polycaprolactone (PCL), conductive fillers, and enzyme/protectant nanoclusters. Circuits can be printed with flexibility (breaking strain ≈80%) and conductivity (≈2.1 × 104 S m-1 ). These composites are degraded at the end of life by immersion in warm water with programmable latency. Approximately 94% of the functional fillers can be recycled and reused with similar device performance. The printed circuits remain functional and degradable after shelf storage for at least 7 months at room temperature and one month of continuous operation under electrical voltage. The present studies provide composite design toward recyclable and easily disposable printed electronics for applications such as wearable electronics, biosensors, and soft robotics.

Suppression of SIN3A by miR-183 Promotes Breast Cancer Metastasis.

Recent work has established that SWI-independent-3 (SIN3) chromatin modification complexes play key roles in cancer progression. We previously demonstrated that knockdown of SIN3A expression promotes human breast cancer cell invasion and metastasis; however, the levels of SIN3A in patient breast carcinoma are not known. We therefore examined SIN3A mRNA and protein in patient tissues and determined that SIN3A expression is lower in breast carcinoma relative to normal breast. Given the 3'-untranslated region (UTR) of SIN3A has several conserved binding sites for oncogenic miRNA, we hypothesized that SIN3A is targeted by miRNA and found that ectopic miR-183 results in decreased SIN3A in breast carcinoma cell lines. Functionally, we demonstrate that miR-183 promotes breast cancer cell migration and invasion in a SIN3A-dependent manner and ectopic miR-183 promotes metastasis in vivo. Patients with breast cancer with high levels of miR-183 and low levels of SIN3A have the shortest overall survival. Given the critical link between metastasis and survival in patients with breast cancer, it is of utmost importance to identify clinically relevant genes involved in metastasis. Here, we report for the first time the aberrant expression of the putative metastasis suppressing gene SIN3A in human breast cancers and propose a mechanism of SIN3A suppression by miR-183. IMPLICATIONS: SIN3A expression is decreased in metastatic breast cancer in part due to miR-183.

Synergistic Enzyme Mixtures to Realize Near-Complete Depolymerization in Biodegradable Polymer/Additive Blends.

Embedding catalysts inside of plastics affords accelerated chemical modification with programmable latency and pathways. Nanoscopically embedded enzymes can lead to near-complete degradation of polyesters via chain-end mediated processive depolymerization. The overall degradation rate and pathways have a strong dependence on the morphology of semicrystalline polyesters. Yet, most studies to date focus on pristine polymers instead of mixtures that contain additives and other components despite their nearly universal use in plastic production. Here, additives are introduced to purposely change the morphology of polycaprolactone (PCL) by increasing the bending and twisting of crystalline lamellae. These morphological changes immobilize chain ends preferentially at the crystalline/amorphous interfaces and limit chain-end accessibility by the embedded processive enzyme. This chain-end redistribution reduces the polymer-to-monomer conversion from >95% to less than 50%, causing formation of highly crystalline plastic pieces, including microplastics. By synergizing both random chain scission and processive depolymerization, it is feasible to navigate morphological changes in polymer/additive blends and to achieve near-complete depolymerization. The random scission enzymes in the amorphous domains create new chain ends that are subsequently bound and depolymerized by processive enzymes. Present studies further highlight the importance to consider how the host polymer's morphologies affect the reactions catalyzed by embedded catalytic species.

Near-complete depolymerization of polyesters with nano-dispersed enzymes.

Successfully interfacing enzymes and biomachinery with polymers affords on-demand modification and/or programmable degradation during the manufacture, utilization and disposal of plastics, but requires controlled biocatalysis in solid matrices with macromolecular substrates1-7. Embedding enzyme microparticles speeds up polyester degradation, but compromises host properties and unintentionally accelerates the formation of microplastics with partial polymer degradation6,8,9. Here we show that by nanoscopically dispersing enzymes with deep active sites, semi-crystalline polyesters can be degraded primarily via chain-end-mediated processive depolymerization with programmable latency and material integrity, akin to polyadenylation-induced messenger RNA decay10. It is also feasible to achieve processivity with enzymes that have surface-exposed active sites by engineering enzyme-protectant-polymer complexes. Poly(caprolactone) and poly(lactic acid) containing less than 2 weight per cent enzymes are depolymerized in days, with up to 98 per cent polymer-to-small-molecule conversion in standard soil composts and household tap water, completely eliminating current needs to separate and landfill their products in compost facilities. Furthermore, oxidases embedded in polyolefins retain their activities. However, hydrocarbon polymers do not closely associate with enzymes, as their polyester counterparts do, and the reactive radicals that are generated cannot chemically modify the macromolecular host. This study provides molecular guidance towards enzyme-polymer pairing and the selection of enzyme protectants to modulate substrate selectivity and optimize biocatalytic pathways. The results also highlight the need for in-depth research in solid-state enzymology, especially in multi-step enzymatic cascades, to tackle chemically dormant substrates without creating secondary environmental contamination and/or biosafety concerns.

The effect of the perfluorocarbon emulsion Oxycyte™ in an ovine model of severe decompression illness.

Background: The treatment of decompression sickness (DCS) with hyperbaric oxygen (HBO2) serves to decrease intravascular bubble size, increase oxygen (O2) delivery to tissue and enhance the elimination of inert gas. Emulsified perfluorocarbons (PFC) combined with breathing O2 have been shown to have similar effects animal models. We studied an ovine model of severe DCS treated with the intravenous PFC Oxycyte™ while breathing O2 compared to saline control also breathing O2. Methods: Juvenile male sheep (N=67; weight 24.4±2.10kg) were compressed to 257 feet of sea water (fsw) in our multiple large-animal chamber where they remained under pressure for 31 minutes. Animals then were decompressed to surface pressure and randomized to receive either Oxycyte at 5mL/kg intravenously (IV) or 5mL/kg saline IV (both receiving 100% O2) 10 minutes after reaching surface pressure. Mortality was recorded at two hours, four hours, and 24 hours after receiving the study drug. Surviving animals underwent perfusion fixation and harvesting of the spinal cord at 24 hours. Spinal cord sections were assessed for volume of lesion area and compared. Results: There was no significant difference in survival at two hours (p=0.2737), four hours (p=0.2101), or 24 hours (p=0.3171). Paralysis at 24 hours was not significantly different. However, spinal cord lesion area was significantly smaller in the Oxycyte group as compared to the saline group, with median spinal cord lesion areas 0.65% vs. 0.94% (p=0.0107). Conclusion: In this ovine model of severe DCS the intravenous PFC Oxycyte did not reduce mortality but did ameliorate spinal cord injury when used after the onset of DCS.

Rounding Out the Understanding of ACD Toxicity with the Discovery of Cyclic Forms of Actin Oligomers.

Actin is an essential element of both innate and adaptive immune systems and can aid in motility and translocation of bacterial pathogens, making it an attractive target for bacterial toxins. Pathogenic Vibrio and Aeromonas genera deliver actin cross-linking domain (ACD) toxin into the cytoplasm of the host cell to poison actin regulation and promptly induce cell rounding. At early stages of toxicity, ACD covalently cross-links actin monomers into oligomers (AOs) that bind through multivalent interactions and potently inhibit several families of actin assembly proteins. At advanced toxicity stages, we found that the terminal protomers of linear AOs can get linked together by ACD to produce cyclic AOs. When tested against formins and Ena/VASP, linear and cyclic AOs exhibit similar inhibitory potential, which for the cyclic AOs is reduced in the presence of profilin. In coarse-grained molecular dynamics simulations, profilin and WH2-motif binding sites on actin subunits remain exposed in modeled AOs of both geometries. We speculate, therefore, that the reduced toxicity of cyclic AOs is due to their reduced configurational entropy. A characteristic feature of cyclic AOs is that, in contrast to the linear forms, they cannot be straightened to form filaments (e.g., through stabilization by cofilin), which makes them less susceptible to neutralization by the host cell.

Cancer prevalence by phase of care: an indicator for assessing health service needs.

INTRODUCTION: Cancer prevalence (people alive on a certain date in a population who previously had a cancer diagnosis) is expected to increase in the United States and Europe due to improvements in survival and population aging. Examination of prevalence by phase of care allows us to identify subgroups of patients according to their care trajectories, thus allowing us to improve health care planning, resource allocation, and calculation of costs. METHODS: A new method to estimate prevalence by phase of care using grouped data is illustrated. Prevalence is divided into 3 mutually exclusive phases: initial, continuing, and end-of-life. An application to US and Italian data is applied to prevalent cases diagnosed with colon-rectum, stomach, lung, or breast cancer. RESULTS: The distribution of phase of care prevalence estimated by cancer type and sex and results from the two datasets are very similar. Most survivors are in the continuing phase; the end-of-life phase is larger for cancers with worse prognosis. All phases prevalence is generally higher in the Italian than in the US dataset, except for lung cancer in women, where prevalence proportion in the Italian dataset is 30% lower than in the United States. DISCUSSION: Incidence, survival, and population age structure are the main determinants of prevalence and they can affect differences in all phases of prevalence, as well as in discrete phases. Incidence is the most influential determinant. Ours is the first study that compares prevalence by phase of care between two populations in Italy and the United States. Despite great differences in health care management in the two countries, we found extremely similar distribution of survivors by phase of care for most cancer sites under study.

Insights into Actin Polymerization and Nucleation Using a Coarse-Grained Model.

We studied actin filament polymerization and nucleation with molecular dynamics simulations and a previously established coarse-grained model having each residue represented by a single interaction site located at the Cα atom. We approximate each actin protein as a fully or partially rigid unit to identify the equilibrium structural ensemble of interprotein complexes. Monomers in the F-actin configuration bound to both barbed and pointed ends of a short F-actin filament at the anticipated locations for polymerization. Binding at both ends occurred with similar affinity. Contacts between residues of the incoming subunit and the short filament were consistent with expectation from models based on crystallography, x-ray diffraction, and cryo-electron microscopy. Binding at the barbed and pointed end also occurred at an angle with respect to the polymerizable bound structure, and the angle range depended on the flexibility of the D-loop. Additional barbed end bound states were seen when the incoming subunit was in the G-actin form. Consistent with an activation barrier for pointed end polymerization, G-actin did not bind at an F-actin pointed end. In all cases, binding at the barbed end also occurred in a configuration similar to the antiparallel (lower) dimer. Individual monomers bound each other in a short-pitch helix complex in addition to other configurations, with several of them apparently nonproductive for polymerization. Simulations with multiple monomers in the F-actin form show assembly into filaments as well as transient aggregates at the barbed end. We discuss the implications of these observations on the kinetic pathway of actin filament nucleation and polymerization and possibilities for future improvements of the coarse-grained model.

Single-chain heteropolymers transport protons selectively and rapidly.

Precise protein sequencing and folding are believed to generate the structure and chemical diversity of natural channels1,2, both of which are essential to synthetically achieve proton transport performance comparable to that seen in natural systems. Geometrically defined channels have been fabricated using peptides, DNAs, carbon nanotubes, sequence-defined polymers and organic frameworks3-13. However, none of these channels rivals the performance observed in their natural counterparts. Here we show that without forming an atomically structured channel, four-monomer-based random heteropolymers (RHPs)14 can mimic membrane proteins and exhibit selective proton transport across lipid bilayers at a rate similar to those of natural proton channels. Statistical control over the monomer distribution in an RHP leads to segmental heterogeneity in hydrophobicity, which facilitates the insertion of single RHPs into the lipid bilayers. It also results in bilayer-spanning segments containing polar monomers that promote the formation of hydrogen-bonded chains15,16 for proton transport. Our study demonstrates the importance of the adaptability that is enabled by statistical similarity among RHP chains and of the modularity provided by the chemical diversity of monomers, to achieve uniform behaviour in heterogeneous systems. Our results also validate statistical randomness as an unexplored approach to realize protein-like behaviour at the single-polymer-chain level in a predictable manner.

Exhaled Volatile Organic Compounds Precedes Pulmonary Injury in a Swine Pulmonary Oxygen Toxicity Model.

PURPOSE: Inspiring high partial pressure of oxygen (FiO2 > 0.6) for a prolonged duration can lead to lung damage termed pulmonary oxygen toxicity (PO2T). While current practice is to limit oxygen exposure, there are clinical and military scenarios where higher FiO2 levels and partial pressures of oxygen are required. The purpose of this study is to develop a non-invasive breath-based biomarker to detect PO2T prior to the onset of clinical symptoms. METHODS: Male Yorkshire swine (20-30 kg) were placed into custom airtight runs and randomized to air (0.209 FiO2, n = 12) or oxygen (>0.95 FiO2, n = 10) for 72 h. Breath samples, arterial blood gases, and vital signs were assessed every 12 h. After 72 h of exposure, animals were euthanized and the lungs processed for histology and wet-dry ratios. RESULTS: Swine exposed to hyperoxia developed pulmonary injury consistent with PO2T. Histology of oxygen-exposed swine showed pulmonary lymphatic congestion, epithelial sloughing, and neutrophil transmigration. Pulmonary injury was also evidenced by increased interstitial edema and a decreased PaO2/FiO2 ratio in the oxygen group when compared to the air control group. Breath volatile organic compound (VOC) sample analysis identified six VOCs that were combined into an algorithm which generated a breath score predicting PO2T with a ROC/AUC curve of 0.72 defined as a of PaO2/FiO2 ratio less than 350 mmHg. CONCLUSION: Exposing swine to 72 h of hyperoxia induced a pulmonary injury consistent with human clinical endpoints of PO2T. VOC analysis identified six VOCs in exhaled breath that preceded PO2T. Results show promise that a simple, non-invasive breath test could potentially predict the risk of pulmonary injury in humans exposed to high partial pressures of oxygen.

Practical Prediction of Heteropolymer Composition and Drift.

Composition drift in batch polymerizations is a well-known phenomenon and can lead to composition gradients in polymers synthesized using controlled polymerization methodologies. With known reactivity ratios of monomers, the drift, and thus resultant gradient copolymer, can be designed by adjusting reagent ratios and targeted conversions. Although such prediction is straightforward, it is seldom done, likely due to the perceived difficulty and unfamiliarity for nonspecialists. We seek to remedy this by providing the communities using copolymers with an easy-to-use program called Compositional Drift which is based on the Mayo-Lewis model and the penultimate model of monomer addition, using Monte Carlo methodology. This tool can also be applied to predict composition in nondrifting polymerizations. Herein we supply this tool to the community, showcasing two recent examples of use to guide experimental design and understanding of heteropolymers (RHP).

Corrigendum: Repeated Low Intensity Blast Exposure Is Associated With Damaged Endothelial Glycocalyx and Downstream Behavioral Deficits.

[This corrects the article DOI: 10.3389/fnbeh.2017.00104.].

Random heteropolymers preserve protein function in foreign environments.

The successful incorporation of active proteins into synthetic polymers could lead to a new class of materials with functions found only in living systems. However, proteins rarely function under the conditions suitable for polymer processing. On the basis of an analysis of trends in protein sequences and characteristic chemical patterns on protein surfaces, we designed four-monomer random heteropolymers to mimic intrinsically disordered proteins for protein solubilization and stabilization in non-native environments. The heteropolymers, with optimized composition and statistical monomer distribution, enable cell-free synthesis of membrane proteins with proper protein folding for transport and enzyme-containing plastics for toxin bioremediation. Controlling the statistical monomer distribution in a heteropolymer, rather than the specific monomer sequence, affords a new strategy to interface with biological systems for protein-based biomaterials.