RESUMO
Additive manufacturing, or 3D printing, is quickly becoming a widespread manufacturing method offering timely and cost-effective build times for unique part geometries with an increasing range of material offerings. One unique use for additive manufacturing is constructing the housing for reference solar cells, which are crucial instruments for evaluating the electrical performance of photovoltaic solar cells and modules. These instruments, which require good thermal conduction, are costly to manufacture because they are usually machined from aluminum using precision milling machines. In this work, we set out to evaluate several presently available additive manufacturing materials for their thermal properties when used to house reference solar cells. We fabricated several types of reference cell instruments with a tabletop, filament-based 3D printer using polylactic acid (PLA) and composite PLA/metal materials with different infill percentages. Furthermore, we fabricated several all-metal 3D printed reference cells using a binder jet printed stainless steel-bronze material blend and compared the thermal properties of all 3D printed instruments against a standard aluminum housing reference cell. Measurements included temperature monitoring of an embedded thermocouple sensor on an isothermal plate under the ambient environment and when exposed to high irradiation under a solar simulator. Current vs voltage measurements were also taken under the solar simulator and the open circuit voltage results were used to verify the actual silicon cell temperature. Our findings indicate that the stainless steel-bronze option can function well as an alternative to traditional aluminum-based housings, while the lower-cost metal-PLA composite can only be used under indoor light spectra or when used in a flash-type solar simulator when the instrument is not exposed to excessive radiation and heat.
RESUMO
Devices using 222 nm germicidal ultraviolet light (GUV222) have been marketed to reduce virus transmission indoors with low risk of occupant harm from direct UV exposure. GUV222 generates ozone, an indoor air pollutant and oxidant, under constrained laboratory conditions, but the chemistry byproducts of GUV222-generated ozone in real indoor spaces is uncharacterized. We deployed GUV222 in a public restroom, with an air change rate of 1 h-1 one weekend and 2 h-1 the next, to measure ozone formation and byproducts generated from ozone chemistry indoors. Ozone from GUV222 increased background concentrations by 5 ppb on average for both weekends and reacted rapidly (e.g., at rates of 3.7 h-1 for the first weekend and 2.0 h-1 for the second) with gas-phase precursors emitted by urinal screens and on surfaces. These ozone reactions generated volatile organic compound and aerosol byproducts (e.g., up to 2.6 µg m-3 of aerosol mass). We find that GUV222 is enhancing indoor chemistry by at least a factor of two for this restroom. The extent of this enhanced chemistry will likely be different for different indoor spaces and is dependent upon ventilation rates, species and concentrations of precursor VOCs, and surface reactivity. Informed by our measurements of ozone reactivity and background aerosol concentrations, we present a framework for predicting aerosol byproduct formation from GUV222 that can be extended to other indoor spaces. Further research is needed to understand how typical uses of GUV222 could impact air quality in chemically diverse indoor spaces and generate indoor air chemistry byproducts that can affect human health.
Assuntos
Poluição do Ar em Ambientes Fechados , Ozônio , Raios Ultravioleta , Ozônio/química , Ozônio/análise , Poluição do Ar em Ambientes Fechados/análise , Compostos Orgânicos Voláteis/análise , Poluentes Atmosféricos/análiseRESUMO
Frequency domain characterization has long served as an important method for the examination of diverse kinetic processes that occur in solar cells. In this study, we investigated the dynamic response of high-efficiency perovskite solar cells utilizing ultra-low-intensity-modulated photocurrent spectroscopy. Distinctive intensity-modulated photocurrent spectroscopy (IMPS) attributes were detected only as a result of this low-intensity modulation, and their evolution under light and voltage bias was investigated in detail. We generally observed only two arcs in the Q-plane plots and attributed the smaller, low-frequency arc to trap-dominated charge transport in the device. Light and voltage bias-dependent measurements confirm this attribution. An equivalent circuit model was used to better understand the features and trends of these measurements and to validate our physical interpretation of the results. Additionally, we tracked the IMPS response of one of the cells over time and showed that slow degradation impacts the size and attributes of the low-frequency arc. Finally, we found that changes in the IMPS response correlate closely with the current versus voltage characteristics of the devices.
RESUMO
Hyperspectral luminescence imaging adds high-resolution spectral data to electroluminescence and photoluminescence images of photovoltaic materials and devices. This enables absolute calibration across a range of spectra, and subsequently enhances the information that can be gained from such measurements. We present a temperature-dependent luminescence hyperspectral imaging study of dilute InGaAs solar cells. We are able to identify the cause of dark spots on the device as local areas with increased defect-related recombination and identify a likely candidate for the type of defect. Hyperspectral images also reveal a device-wide pattern in low-energy-tail luminescence and In alloy fraction, which corresponds with increased nonradiative recombination. This pattern would not be identifiable with conventional imaging methods. Detailed information on such features is useful as, paired with knowledge of fabrication processes and device design features, it can help identify ways to reduce associated non-radiative recombination and improve device performance.
RESUMO
Recent interest in commercial devices containing germicidal ultraviolet lamps with a peak emission wavelength at 222 nm (GUV222) has focused on mitigating virus transmission indoors while posing minimum risk to human tissue. However, 222 nm light can produce ozone (O3) in air. O3 is an undesirable component of indoor air because of health impacts from acute to chronic exposure and its ability to degrade indoor air quality through oxidation chemistry. In seven four-hour experiments we measured O3 produced from a single filtered GUV222 lamp in a 31.5 m3 stainless steel chamber. Using an emission model, we determined an O3 generation rate of 19.4 ppbv h-1 ± 0.3 ppbv h-1 (equivalent to 1.22 mg h-1 ± 0.02 mg h-1). We estimated the fluence rate from the lamp using two methods: (1) chemical actinometry using tetrachloroethylene (actinometry) and (2) geometric projection of the irradiance field from radial and angular distribution measurements of the GUV222 lamp fluence (irradiance). Using the estimated lamp fluence rates of 2.2 µW cm-2 (actinometry) and 3.2 µW cm-2 (irradiance) we predicted O3 production in our chamber within 20 % of the average measured mixing ratio. Future studies should evaluate the indoor air quality impacts of GUV222 technologies.
RESUMO
We have used a calibrated, wide-field hyperspectral imaging instrument to obtain absolute spectrally and spatially resolved photoluminescence images in high growth-rate, rear-junction GaAs solar cells from 300 to 77 K. At the site of some localized defects scattered throughout the active layer, we report a novel, double-peak luminescence emission with maximum peak energies corresponding to both the main band-to-band transition and a band-to-impurity optical transition below the band gap energy. Temperature-dependent imaging reveals that the evolution of the peak intensity and energy agrees well with a model of free-to-bound recombination with a deep impurity center, likely a gallium antisite defect. We also analyzed the temperature dependence of the band-to-band transition within the context of an analytical model of photoluminescence and discuss the agreement between the modeling results and external device parameters such as the open circuit voltage of the solar cells over this broad temperature range.
RESUMO
Reference cell based current vs voltage (IV) measurements assume that the effect of an illumination spectrum on a solar cell's performance can be fully captured by the multiplication of the spectrum with the device's spectral response and subsequent integration. This is based on a fundamental understanding that sub-bandgap light will be minimally absorbed, if at all, in the active layers of the solar cell and therefore not contribute to the power generation. In this work we show a novel phenomenon in which illumination of the substrate is required for good performance in solar cells with III-V active layers and germanium substrates, despite negligible contribution to the short circuit current or open circuit voltage, or increase of generated power beyond that expected from the III-V junction. Discovered in the course of characterizing cells for low-light conditions, we confirm the observation with additional IV and electroluminescence measurements and modeling that reproduces experimental results. This phenomenon has implications for device characterization under non-standard light sources, the development of solar cells for conditions lacking long-wavelength light such as indoor photovoltaics under light-emitting diode illumination, and the prediction of device performance under spectra that differ from the test conditions.
RESUMO
Hyperspectral electroluminescence and photoluminescence imaging of photovoltaic materials and devices produces three-dimensional spatially and spectrally resolved luminescence data, which can be calibrated to an absolute scale, enabling the extraction of high resolution maps of quantities such as the local voltage (quasi-Fermi-level splitting). This extraction requires supplemental measurements of external quantum efficiency (EQE), but these do not have the same spatial resolution. Previously, assumptions have been made to overcome this limitation. In this work, we evaluate these assumptions for InGaAs solar cells with significant spatial variation in the luminescence spectrum shape due to small regions with elevated concentrations of radiative defects. Although appropriate for small variations in spectral shape, we find that with more significant variation, these assumptions can result in non-physical EQEs and too-low voltages. Combining multiple methods can help alleviate this, or a minimum voltage map can be extracted, which will be similar to the actual voltage when EQE is high.
RESUMO
As interest in Internet-of-Things (IoT) devices like wireless sensors increases, research efforts have focused on finding ways for these sensors to self-harvest energy from the environment in which they are installed. Photovoltaic (PV) cells or mini-modules are an intuitive choice for harvesting indoor ambient light, even under low light conditions, and using it for battery charging and powering of these devices. Characterizations of battery charging, for small rechargeable batteries from low charge to full charge, have been investigated using PV mini-modules of equal area. We present battery charging results using three different PV technologies, monocrystalline silicon (c-Si), gallium-indium-phosphide (GaInP) and gallium-arsenide (GaAs) under a warm color temperature (3000 K) LED lighting at an illuminance of 1000 lx. Battery charging times are shortest for the more efficient GAInP and GaAs mini-modules whose spectral response are a better match to the LED test source, which contains mostly visible photons, and longest for the less efficient Si cells. As a demonstration, a wireless temperature sensor mote was attached to the charging circuit and operated to determine its power consumption in relation to the available charging power. The mote's maximum power draw was less than the charging power from the least efficient c-Si mini-module. Our findings affirm the feasibility of utilizing PV under typical indoor lighting conditions to power IoT devices.
RESUMO
Additive manufacturing methods based on photopolymerization offer a promising potential for fabrication of high quality, highly transparent optical components. One use of these technologies involves fabrication of parts for very specific and narrow applications. In this work, we first performed optical raytracing simulations to model an optimized freeform nonimaging concentrator for a custom-built 12-LED array and then fabricated several waveguide concentrators using 3D printing and characterized their optical characteristics. Our results demonstrate that realizing an irradiance of 17 kW/m2 or more with an irradiance nonuniformity of better than 2 % over an area approaching 1 cm2 is realistic and that such an approach can rival intensities achieved with powerful lasers over a similar area. We also discuss an application where eight different types of LEDs were coupled into the waveguides to construct a solar simulator.
RESUMO
The external luminescence quantum yield as a function of the solar cell current density when exposed to low indoor light was estimated based on absolute electroluminescence measurements and a self-consistent use of the electro-optical reciprocity relationship. By determining the luminescence yield at current densities corresponding to the cell operation at the maximum power point, we can compute energy losses corresponding to radiative and nonradiative recombination. Combined with other major energy losses, we can obtain a clear picture of the fundamental balance of energy within the cell when exposed to room light with a typical total illuminance of 1000 lx or less.
RESUMO
Due to the rapidly growing interest in energy harvesting from indoor ambient lighting for the powering of internet-of-things devices, accurate methods for measurements of the current vs voltage characteristics of light-harvesting solar photovoltaic devices must be established and disseminated. A key requirement when conducting such characterizations is to create and measure the irradiance from the test light, whose spectral output approximates the profile of some agreed-upon standard reference. The current methods for measuring the irradiance from indoor ambient lighting (e.g., illuminance meters) can yield unacceptable discrepancies in measurements from one lab to another. Here, we take the first steps in establishing a more accurate alternative: using a calibrated reference solar cell to measure the total irradiance of the test light when establishing the test light level, and then, once set, while collecting the characterization data for the test specimen. The method involves establishing multiple reference indoor lighting spectra that meet desired illuminance requirements, while also offering precise spectral irradiance profiles. Regardless of whether these proposed spectra are formally adopted, the test method is available and useful. The proposed approach facilitates inter-lab measurements, allows for a way to calculate an accurate power conversion efficiency, and establishes a dialogue between National Metrology Institutes to begin the process of drafting standards for solar cell testing under conditions that are significantly different than the well-established standard reporting condition used for rating solar modules that are deployed outdoors.
RESUMO
Irradiance spectral responsivity is an important measurement characteristic for a solar cell and has served as a primary reference cell calibration parameter for a growing number of national laboratories in recent years. This paper discusses the process by which a packaged reference cell is calibrated using the power spectral responsivity from a monochromator-based measurement coupled with discrete irradiance responsivity measurements from a light-emitting diode (LED) array source to uniformly illuminate the cell. To accurately transfer the responsivity from a calibrated detector cell to a fully packaged reference cell, differences in the measurements of power and irradiance responsivities due to the two separate lighting sources must be reconciled. The spectral effects of using LEDs, as well as other physical packaging effects, are discussed in detail, and a comprehensive treatment of the uncertainty components from both approaches is presented.
RESUMO
Luminescent coupling in multijunction solar cells has a major impact on device response, and its impact on current-voltage and quantum efficiency measurements is well established. However, the role of luminescent coupling in more advanced characterization techniques such as modulated photocurrent spectroscopy is virtually unknown. Here we present measurements of the frequency-dependent photocurrent of a triple junction solar cell with significant coupling between adjacent junctions. We develop an equivalent circuit model that includes luminescent coupling which shows good agreement with the measured frequency response. The model also shows how the system response can elucidate the type of charge carrier recombination in these III-V semiconductor materials.
RESUMO
We calibrate the seven parameters of a single-diode model (SDM) for photo-voltaic device performance using current-voltage (I-V) curves measured under controlled laboratory conditions over a matrix of nominal temperature and irradiance combinations. As described in previous modeling work, we do not use a short-circuit temperature coefficient parameter, which depends on the often unknown insolation spectrum and whose validity may be questionable. Alternatively, we employ a rigorous temperature-dependent extension of the spectral mismatch correction. This standard correction is routinely used by calibration laboratories to measure an effective irradiance ratio (i.e., a particular ratio of short-circuit currents) using a calibrated reference device, thereby compensating for spectral effects of the irradiance and for any difference in spectral response between the test device and reference device. The calibrated SDM predicts the device's current at any prescribed voltage, temperature, and effective irradiance, and thus can predicts power and energy production under prescribed conditions. Our approach aligns well with the matched reference cell approach to outdoor I-V curve measurements, while clarifying the requirements of a "matched" condition for the irradiance monitoring device(s). We find evidence for significant model discrepancy in the SDM, suggesting that model improvements and measurement intercomparisons are needed.
RESUMO
The frequency dependence of the external quantum efficiency (EQE) of high-quality multijunction solar cells was examined by the modulated photocurrent spectroscopy method via an optical setup comprised of a light-pipe-coupled compact LED array. The optical excitation was achieved through sinusoidal electrical modulation of an appropriate LED by a custom-designed, high bandwidth amplifier. We observed unique features in the amplitude and phase data of the EQE frequency sweeps that are very sensitive to various subcell parameters and light bias conditions. These features are discussed extensively within the context of an AC equivalent circuit model, showing remarkable agreement between the experimental data and the proposed model.
RESUMO
We present a light emitting diode (LED)-based system utilizing a combinatorial flux addition method to investigate the nonlinear relationship in solar cells between the output current of the cell and the incident irradiance level. The magnitude of the light flux is controlled by the supplied currents to two LEDs (or two sets of them) in a combinatorial fashion. The signals measured from the cell are arranged within a related overdetermined linear system of equations derived from an appropriately chosen Nth degree polynomial representing the relationship between the measured signals and the incident fluxes. The flux values and the polynomial coefficients are then solved for by linear least squares to obtain the best fit. The technique can be applied to any solar cell, under either monochromatic or broadband spectrum. For the unscaled solution, no reference detectors or prior calibrations of the light flux are required. However, if at least one calibrated irradiance value is known, then the entire curve can be scaled to an appropriate spectral responsivity value. Using this technique, a large number of data points can be obtained in a relatively short time scale over a large signal range.
RESUMO
Charge carrier lifetimes in photovoltaic-grade silicon wafers were measured by a spectral-dependent, quasi-steady-state photoconductance technique. Narrow bandwidth light emitting diodes (LEDs) were used to excite excess charge carriers within the material, and the effective lifetimes of these carriers were measured as a function of wavelength and intensity. The dependence of the effective lifetime on the excitation wavelength was then analyzed within the context of an analytical model relating effective lifetime to the bulk lifetime and surface recombination velocity of the material. The agreement between the model and the experimental data provides validation for this technique to be used at various stages of the solar cell production line to investigate the quality of the passivation layers and the bulk properties of the material.
RESUMO
Spectral response measurements of germanium-based triple-junction solar cells were performed under a variety of light and voltage bias conditions. Two of the three junctions exhibited voltage and light bias dependent artifacts in their measured responses, complicating the true spectral response of these junctions. To obtain more insight into the observed phenomena, a set of current-voltage measurement combinations were also performed on the solar cells under identical illumination conditions, and the data were used in the context of a diode-based analytical model to calculate and predict the spectral response behavior of each junction as a function of voltage. The analysis revealed that both low shunt resistance and low breakdown voltages in two of the three junctions influenced the measured quantum efficiency of all three junctions. The data and the modeling suggest that combination of current-voltage measurements under various light bias sources can reveal important information about the spectral response behavior in multijunction solar cells.