Optimization of energy recovery efficiency from sweet sorghum stems by ethanol and methane fermentation processes coupling.

Taken separately, a single sweet sorghum stem bioconversion process for bioethanol and biomethane production only leads to a partial conversion of organic matter. The direct fermentation of crushed whole stem coupled with the methanization of the subsequent solid residues in a two-stage process was experimented to improve energy bioconversion yield, efficiency, and profitability. The raw stalk calorific value was 17,144.17 kJ/kg DM. Fermentation step performed using Saccharomyces cerevisiae resulted in a bioconversion yield of 261.18 g Eth/kg DM, i.e. an energy recovery efficiency of 6921.27 kJ/kg DM. The methanogenic potentials were 279 and 256 LCH4/kg DM, respectively, for raw stem and fermentation residues, i.e. energy yields of 10,013.31 and 9187.84 kJ/kg DM, respectively. Coupling processes have significantly increased yield and made it possible to reach 13,309.57 kJ/kg DM, i.e. 77.63% of raw stem energy recovery yield, compared to 40.37% and 58.40%, respectively, for single fermentation and methanization processes.

Sweet sorghum stem is a viable feedstock source for efficient coproduction of ethanol and methaneSorghum stems calorific value determination revealed an energy potential of 17.15 MJ/kg DMEnergy recovery by single methanization yielded 18.03% more than ethanol fermentationCoupling processes has significantly increased energy recovery yield and profitability.

Innovation in Tigernut (Cyperus Esculentus L.) Milk Production: In Situ Hydrolysis of Starch.

Tigernut tubers (Cyperus esculentus) are used for the production of vegetable milk, commonly known as "Horchata de chufa" in Spain. The presence of starch in the tuber limits the yield of the milk, since this carbohydrate gelatinizes during the pasteurization of the milk and leads to the considerable solidification of this drink. The present work aims to improve the yields and extraction practice of the milk by an in situ hydrolysis of starch, using exogenous amylases of industrial or vegetable origin. The obtained results show that sprouting improves the extraction yields of tigernut milk, which goes from 50% to about 70%. This improvement in milk yield corresponds to a hydrolysis of about 35% of the starch in the tuber. The use of exogenous amylases leads to starch hydrolysis rates of 45% and 70%, respectively, for amylolytic extracts from sprouted tigernut tubers and amylase, with the corollary of a natural increase in the sweetness of milk. This technical approach makes it possible to produce a naturally sweetened tigernut milk which easily lends itself to pasteurization without a significant increase in viscosity.

Influence of Physicochemical Characteristics of Neem Seeds (Azadirachta indica A. Juss) on Biodiesel Production.

The aim of this work is to study the influence of the physicochemical characteristics of neem seeds, according to their mass and oil content, on the production of biodiesel. After the physical characterization of the seeds and extraction of the oil (triglycerides), biodiesel was produced from crude neem seed oil by transesterification with ethanol in the presence of sodium hydroxide. This study shows that the physicochemical characteristics of these seeds vary according to the origin of the samples. The seeds from Zidim, with a mass average of 200 seeds evaluated at 141.36 g and an almond content of 40.70%, have better characteristics compared to those collected in the city of Maroua, with average values evaluated at 128.00 g and 36.05%, respectively. Almonds have an average lipid content of 53.98 and 56.75% for the Maroua and Zidim samples, respectively. This study also reveals that neem oil, by its physicochemical characteristics, has a satisfactory quality for a valorization in the production of biodiesel. However, its relatively high free fatty acid content is a major drawback, which leads to a low yield of biodiesel, evaluated on average at 89.02%, and requires a desacidification operation to improve this yield. The analysis of biodiesel indicates physicochemical characteristics close and comparable to those of petrodiesel, particularly in terms of calorific value, density, kinematic viscosity, acid value, evaluated at 41.00 MJ/kg, 0.803, 4.42 cSt, and 0.130 mg/g, respectively.