Bio-based hydrogels induced by salts.

In this study, we introduce a salt-responsive hydrogel system utilizing a sugar-derived surfactant featuring a polyhydroxy spacer in its headgroup. The inclusion of salts enhances and organizes the intermolecular hydrogen bonding within the hydrophilic region of the polyhydroxy spacer, promoting cross-linking among surfactant molecules.

Switching CO2 Electroreduction Pathways between Ethylene and Ethanol via Tuning Microenvironment of the Coating on Copper Nanofibers.

Engineering the microenvironment of electrode surface is one of the effective means to tune the reaction pathways in CO2RR. In this work, we prepared copper nanofibers with conductive polypyrrole coating by polymerization of pyrrole using polyvinyl pyrrolidone (PVP) as template. As a result, the obtained copper nanofibers Cu/Cu2+1O/SHNC, exhibited a superhydrophobic surface, which demonstrated very high selectivity for ethanol with a Faraday efficiency (FE) of 66.5% at -1.1 V vs reversible hydrogen electrode (RHE) in flow cell. However, the catalyst Cu/Cu2+1O/NC, which was prepared under the same conditions but without PVP, possessed a hydrophobic surface and exhibited high selectivity towards ethylene at the given potentials. The mechanism for switch of reaction pathways from ethylene to ethanol in CO2RR was studied. Incorporating pyrrolidone groups into the polymer coating results in the formation of a superhydrophobic surface. This surface weakens the hydrogen bonding interaction between interfacial water molecules and facilitates the transfer of CO2, thereby enhancing the local CO2/H2O ratio. The high coverage of *CO promotes the coupling of *CO and *CHO to form C2 intermediates, and reduces the reaction energy for the formation of *CHCHOH (ethanol path) at the interface. This ensures that the reaction pathway is directed towards ethanol.

Urea Synthesis via Coelectrolysis of CO2 and Nitrate over Heterostructured Cu-Bi Catalysts.

Electrocatalytic coupling of CO2 and NO3- to urea is a promising way to mitigate greenhouse gas emissions, reduce waste from industrial processes, and store renewable energy. However, the poor selectivity and activity limit its application due to the multistep process involving diverse reactants and reactions. Herein, we report the first work to design heterostructured Cu-Bi bimetallic catalysts for urea electrosynthesis. A high urea Faradaic efficiency (FE) of 23.5% with a production rate of 2180.3 µg h-1 mgcat-1 was achieved in H-cells, which surpassed most reported electrocatalysts in the literature. Moreover, the catalyst had a remarkable recycling stability. Experiments and density functional theory calculations demonstrated that introduction of moderate Bi induced the formation of the Bi-Cu/O-Bi/Cu2O heterostructure with abundant phase boundaries, which are beneficial for NO3-, CO2, and H2O activation and enhance C-N coupling and promote *HONCON intermediate formation. Moreover, favorable *HNCONH2 protonation and urea desorption processes were also validated, further explaining the reason for high activity and selectivity toward urea.

Thermally-stable single-site Pd on CeO2 catalyst for selective amination of phenols to aromatic amines without external hydrogen.

Developing a new route to produce aromatic amines as key chemicals from renewable phenols is a benign alternative to current fossil-based routes like nitroaromatic hydrogenation, but is challenging because of the high dissociation energy of the Ar-OH bond and difficulty in controlling side reactions. Herein, an aerosolizing-pyrolysis strategy was developed to prepare high-density single-site cationic Pd species immobilized on CeO2 (Pd1/CeO2) with excellent sintering resistance. The obtained Pd1/CeO2 catalysts achieved remarkable selectivity of important aromatic amines (yield up to 76.2%) in the phenols amination with amines without external hydrogen sources, while Pd nano-catalysts mainly afforded phenyl-ring-saturation products. The excellent catalytic properties of the Pd1/CeO2 are closely related to high-loading Pd single-site catalysts with abundant surface defect sites and suitable acid-base properties. This report provides a sustainable route for producing aromatic amines from renewable feedstocks.

Achieving over 90% Faradaic Efficiency in Cyclohexanone Oxime Electrosynthesis Using the Cu-Mo Dual-Site Catalyst.

Coupling with the nitrate electroreduction reaction (NitRR), the electrosynthesis of cyclohexanone oxime (CHO, the vital feedstock in the nylon-6 industry) from cyclohexanone provides a promising alternative to the traditional energy consumption process. However, it still suffers from low efficiency because selective production of *NH2OH intermediate from NitRR under large current densities is challenging. We here report a Cu1MoOx/nitrogen-doped carbon (NC) electrocatalyst with high-density Cu-Mo dual sites for NitRR to selectively produce and stabilize *NH2OH, with the subsequent cyclohexanone oximation achieving the highest CHO Faradaic efficiency of 94.5% and a yield rate of 3.0 mol g-1 h-1 at an industrially relevant current density of 0.5 A cm-2. Furthermore, in situ characterizations evidenced that the Cu-Mo dual sites in Cu1MoOx/NC effectively inhibited hydrodeoxygenation of hydroxyl-containing intermediates of NitRR, selectively producing *NH2OH and thus achieving cyclohexanone oximation with high efficiency. This work provides a high-performance catalyst for CHO electrosynthesis from nitrogenous waste, showing promising application potential in industrial production of CHO.

Manipulation of Oxygen Species on an Antimony-Modified Copper Surface to Tune the Product Selectivity in CO2 Electroreduction.

Rational regulation of the electrochemical CO2 reduction reaction (CO2RR) pathway to produce desired products is particularly interesting, yet designing economical and robust catalysts is crucial. Here, we report an antimony-modified copper (CuSb) catalyst capable of selectively producing both CO and multicarbon (C2+) products in the CO2RR. At a current density of 0.3 A/cm2, the faradaic efficiency (FE) of CO was as high as 98.2% with a potential of -0.6 V vs reversible hydrogen electrode (RHE). When the current density increased to 1.1 A/cm2 at -1.1 V vs RHE, the primary products shifted to C2+ compounds with a FE of 75.6%. Experimental and theoretical studies indicate that tuning the potential could manipulate the oxygen species on the CuSb surface, which determined the product selectivity in the CO2RR. At a more positive potential, the existence of oxygen species facilitates the potential-limiting step involving *COOH formation and reduces the adsorption of *CO intermediates, thereby promoting CO production. At a more negative potential, the localized high CO concentration coupled with the enhanced adsorption of *CO intermediates due to Sb incorporation facilitates C-C coupling and deep hydrogenation processes, resulting in an increased C2+ selectivity.

Ambient-pressure alkoxycarbonylation for sustainable synthesis of ester.

Alkoxycarbonylation reactions are common in the chemical industry, yet process sustainability is limited by the inefficient utilization of CO. In this study, we address this issue and demonstrate that significant improvements can be achieved by adopting a heterogeneously catalyzed process, using a Ru/NbOx catalyst. The Ru/NbOx catalyst enables the direct synthesis of methyl propionate, a key industrial commodity, with over 98% selectivity from CO, ethylene and methanol, without any ligands or acid/base promoters. Under ambient CO pressure, a high CO utilization efficiency (336 mmolestermolCO-1h-1) is achieved. Mechanistic investigations reveal that CO undergoes a methoxycarbonyl (COOCH3) intermediate pathway, attacking the terminal carbon atom of alkene and yielding linear esters. The origins of prevailing linear regioselectivity in esters are revealed. The infrared spectroscopic feature of the key COOCH3 species is observed at 1750 cm-1 (C=O vibration) both experimentally and computationally. The broad substrate applicability of Ru/NbOx catalyst for ester production is demonstrated. This process offers a sustainable and efficient approach with high CO utilization and atom economy for the synthesis of esters.

Multivalent Cu sites synergistically adjust carbonaceous intermediates adsorption for electrocatalytic ethanol production.

Copper (Cu)-based catalysts show promise for electrocatalytic CO2 reduction (CO2RR) to multi-carbon alcohols, but thermodynamic constraints lead to competitive hydrocarbon (e.g., ethylene) production. Achieving selective ethanol production with high Faradaic efficiency (FE) and current density is still challenging. Here we show a multivalent Cu-based catalyst, Cu-2,3,7,8-tetraaminophenazine-1,4,6,9-tetraone (Cu-TAPT) with Cu2+ and Cu+ atomic ratio of about 1:2 for CO2RR. Cu-TAPT exhibits an ethanol FE of 54.3 ± 3% at an industrial-scale current density of 429 mA cm-2, with the ethanol-to-ethylene ratio reaching 3.14:1. Experimental and theoretical calculations collectively unveil that the catalyst is stable during CO2RR, resulting from suitable coordination of the Cu2+ and Cu+ with the functional groups in TAPT. Additionally, mechanism studies show that the increased ethanol selectivity originates from synergy of multivalent Cu sites, which can promote asymmetric C-C coupling and adjust the adsorption strength of different carbonaceous intermediates, favoring hydroxy-containing C2 intermediate (*HCCHOH) formation and formation of ethanol.

Highly Selective CO2 Electroreduction to Multi-carbon Alcohols via Amine Modified Copper Nanoparticles at Acidic Conditions.

Electroreduction of CO2 into multi-carbon (C2+) products (e.g. C2+ alcohols) offers a promising way for CO2 utilization. Use of strong alkaline electrolytes is favorable to producing C2+ products. However, CO2 can react with hydroxide to form carbonate/bicarbonate, which results in low carbon utilization efficiency and poor stability. Using acidic electrolyte is an efficient way to solve the problems, but it is a challenge to achieve high selectivity of C2+ products. Here we report that the amine modified copper nanoparticles exhibit high selectivity of C2+ products and carbon utilization at acidic condition. The Faradaic efficiency (FE) of C2+ products reach up to 81.8% at acidic media (pH=2) with a total current density of 410 mA cm-2 over n-butylamine modified Cu. Especially the FE of C2+ alcohols is 52.6%, which is higher than those reported for CO2 electroreduction at acidic condition. In addition, the single-pass carbon efficiency towards C2+ production reach up to 60%. Detailed studies demonstrate that the amine molecule on the surface of Cu cannot only enhance the formation, adsorption and coverage of *CO, but also provide a hydrophobic environment, which result in the high selectivity of C2+ alcohols at acidic condition.

In situ Generation of Cyclohexanone Drives Electrocatalytic Upgrading of Phenol to Nylon-6 Precursor.

Coupling in situ generated intermediates with other substrates/intermediates is a viable approach for diversifying product outcomes of catalytic reactions involving two or multiple reactants. Cyclohexanone oxime is a key precursor for caprolactam synthesis (the monomer of Nylon-6), yet its current production uses unsustainable carbon sources, noble metal catalysts, and harsh conditions. Herein, we report the first work to synthesize cyclohexanone oxime through electroreduction of phenol and hydroxylamine. The Faradaic efficiency reached 69.1% over Cu catalyst, accompanied by a corresponding cyclohexanone oxime formation rate of 82.0 g h-1 gcat-1. In addition, the conversion of phenol was up to 97.5%. In situ characterizations, control experiments, and theoretical calculations suggested the importance of balanced activation of water, phenol, and hydroxylamine substrates on the optimal metallic Cu catalyst for achieving high-performance cyclohexanone oxime synthesis. Besides, a tandem catalytic route for the upgrading of lignin to caprolactam has been successfully developed through the integration of thermal catalysis, electrocatalysis, and Beckmann rearrangement, which achieved the synthesis of 0.40 g of caprolactam from 4.0 g of lignin raw material.

Switching Reaction Pathways of CO2 Electroreduction by Modulating Cations in the Electrochemical Double Layer.

Tuning the selectivity of CO2 electroreduction reaction (CO2RR) solely by changing electrolyte is a very attractive topic. In this study, we conducted CO2RR in different aqueous electrolytes over bulk metal electrodes. It was discovered that controlled CO2RR could be achieved by modulating cations in the electrochemical double layer. Specifically, ionic liquid cations in the electrolyte significantly inhibits the hydrogen evolution reaction (HER), while yielding high Faraday efficiencies toward CO (FECO) or formate (FEformate) depending on the alkali metal cations. For example, the product could be switched from CO (FECO=97.3 %) to formate (FEformate=93.5 %) by changing the electrolyte from 0.1 M KBr-0.5 M 1-octyl-3-methylimidazolium bromide (OmimBr) to 0.1 M CsBr-0.5 M OmimBr aqueous solutions over pristine Cu foil electrode. In situ spectroscopy and theoretical calculations reveal that the ordered structure generated by the assembly of Omim+ under an applied negative potential alters the hydrogen bonding structure of the interfacial water, thereby inhibiting the HER. The difference in selectivity in the presence of different cations is attributed to the hydrogen bonding effect caused by Omim+, which alters the solvated structure of the alkali metal cations and thus affects the stabilization of intermediates of different pathways.

Lattice Strain Engineering Boosts CO2 Electroreduction to C2+ Products.

Regulating the binding effect between the surface of an electrode material and reaction intermediates is essential in highly efficient CO2 electro-reduction to produce high-value multicarbon (C2+) compounds. Theoretical study reveals that lattice tensile strain in single-component Cu catalysts can reduce the dipole-dipole repulsion between *CO intermediates and promotes *OH adsorption, and the high *CO and *OH coverage decreases the energy barrier for C-C coupling. In this work, Cu catalysts with varying lattice tensile strain were fabricated by electro-reducing CuO precursors with different crystallinity, without adding any extra components. The as-prepared single-component Cu catalysts were used for CO2 electro-reduction, and it is discovered that the lattice tensile strain in Cu could enhance the Faradaic efficiency (FE) of C2+ products effectively. Especially, the as-prepared CuTPA catalyst with high lattice tensile strain achieves a FEC2+ of 90.9 % at -1.25 V vs. RHE with a partial current density of 486.1 mA cm-2.

Atomically dispersed cobalt catalysts for tandem synthesis of primary benzylamines from oxidized ß-O-4 segments.

This work presents an innovative approach focusing on fine-tuning the coordination environment of atomically dispersed cobalt catalysts for tandem synthesis of primary benzylamines from oxidized lignin model compounds. By meticulously regulating the Co-N coordination environment, the activity of these catalysts in the hydrogenolysis and reductive amination reactions was effectively controlled. Notably, our study demonstrates that, in contrast to cobalt nanoparticle catalysts, atomically dispersed cobalt catalysts exhibit precise control of the sequence of hydrogenolysis and reductive amination reactions. Particularly, the CoN3 catalyst with a triple Co-N coordination number achieved a remarkable 94% yield in the synthesis of primary benzylamine. To our knowledge, there is no previous documentation of the synthesis of primary benzylamines from lignin dimer model compounds. Our study highlights a promising one-pot route for sustainable production of nitrogen-containing aromatic chemicals from lignin.

Hydroxyl carboxylate anion catalyzed depolymerization of biopolyesters and transformation to chemicals.

Upcycling biopolyesters (e.g., polyglycolic acid, PGA) into chemicals is an interesting and challenging topic. Herein, we report a novel protocol to upgrade biopolyesters derived from hydroxyl carboxylic acids over ionic liquids with a hydroxyl carboxylate anion (e.g., glycolate, lactate) into various chemicals under metal-free conditions. It is found that as hydrogen-bond donors and acceptors, hydroxyl carboxylate anions can readily activate the ester group via hydrogen bonding and decompose biopolyesters via autocatalyzed-transesterification to form hydroxyl carboxylate anion-based intermediates. These intermediates can react with various nucleophiles (e.g. H2O, methanol, amines and hydrazine) to access the corresponding acids, esters and amides under mild conditions (e.g., 40 °C). For example, 1-ethyl-3-methylimidazolium glycolate can achieve complete transformation of PGA into various chemicals such as glycolic acid, alkyl glycolates, 2-hydroxy amides, 2-(hydroxymethyl)benzimidazole, and 1,3-benzothiazol-2-ylmethanol in excellent yields via hydrolysis, alcoholysis and aminolysis, respectively. This protocol is simple, green, and highly efficient, which opens a novel way to upcycle biopolyesters to useful chemicals.

Electrocatalysis in deep eutectic solvents: from fundamental properties to applications.

Electrocatalysis stands out as a promising avenue for synthesizing high-value products with minimal environmental footprint, aligning with the imperative for sustainable energy solutions. Deep eutectic solvents (DESs), renowned for their eco-friendly, safe, and cost-effective nature, present myriad advantages, including extensive opportunities for material innovation and utilization as reaction media in electrocatalysis. This review initiates with an exposition on the distinctive features of DESs, progressing to explore their applications as solvents in electrocatalyst synthesis and electrocatalysis. Additionally, it offers an insightful analysis of the challenges and prospects inherent in electrocatalysis within DESs. By delving into these aspects comprehensively, this review aims to furnish a nuanced understanding of DESs, thus broadening their horizons in the realm of electrocatalysis and facilitating their expanded application.

Highly efficient recycling of polyester wastes to diols using Ru and Mo dual-atom catalyst.

The chemical recycling of polyester wastes is of great significance for sustainable development, which also provides an opportunity to access various oxygen-containing chemicals, but generally suffers from low efficiency or separation difficulty. Herein, we report anatase TiO2 supported Ru and Mo dual-atom catalysts, which achieve transformation of various polyesters into corresponding diols in 100% selectivity via hydrolysis and subsequent hydrogenation in water under mild conditions (e.g., 160 °C, 4 MPa). Compelling evidence is provided for the coexistence of Ru single-atom and O-bridged Ru and Mo dual-atom sites within this kind of catalysts. It is verified that the Ru single-atom sites activate H2 for hydrogenation of carboxylic acid derived from polyester hydrolysis, and the O-bridged Ru and Mo dual-atom sites suppress hydrodeoxygenation of the resultant alcohols due to a high reaction energy barrier. Notably, this kind of dual-atom catalysts can be regenerated with high activity and stability. This work presents an effective way to reconstruct polyester wastes into valuable diols, which may have promising application potential.

Enhancing C2+ product selectivity in CO2 electroreduction by enriching intermediates over carbon-based nanoreactors.

Electrochemical CO2 reduction reaction (CO2RR) to multicarbon (C2+) products faces challenges of unsatisfactory selectivity and stability. Guided by finite element method (FEM) simulation, a nanoreactor with cavity structure can facilitate C-C coupling by enriching *CO intermediates, thus enhancing the selectivity of C2+ products. We designed a stable carbon-based nanoreactor with cavity structure and Cu active sites. The unique geometric structure endows the carbon-based nanoreactor with a remarkable C2+ product faradaic efficiency (80.5%) and C2+-to-C1 selectivity (8.1) during the CO2 electroreduction. Furthermore, it shows that the carbon shell could efficiently stabilize and highly disperse the Cu active sites for above 20 hours of testing. A remarkable C2+ partial current density of-323 mA cm-2 was also achieved in a flow cell device. In situ Raman spectra and density functional theory (DFT) calculation studies validated that the *COatop intermediates are concentrated in the nanoreactor, which reduces the free energy of C-C coupling. This work unveiled a simple catalyst design strategy that would be applied to improve C2+ product selectivity and stability by rationalizing the geometric structures and components of catalysts.

CO2 electrolysis to multi-carbon products in strong acid at ampere-current levels on La-Cu spheres with channels.

Achieving satisfactory multi-carbon (C2+) products selectivity and current density under acidic condition is a key issue for practical application of electrochemical CO2 reduction reaction (CO2RR), but is challenging. Herein, we demonstrate that combining microenvironment modulation by porous channel structure and intrinsic catalytic activity enhancement via doping effect could promote efficient CO2RR toward C2+ products in acidic electrolyte (pH ≤ 1). The La-doped Cu hollow sphere with channels exhibits a C2+ products Faradaic efficiency (FE) of 86.2% with a partial current density of -775.8 mA cm-2. CO2 single-pass conversion efficiency for C2+ products can reach 52.8% at -900 mA cm-2. Moreover, the catalyst still maintains a high C2+ FE of 81.3% at -1 A cm-2. The channel structure plays a crucial role in accumulating K+ and OH- species near the catalyst surface and within the channels, which effectively suppresses the undesired hydrogen evolution and promotes C-C coupling. Additionally, the La doping enhances the generation of *CO intermediate, and also facilitates C2+ products formation.

Synthesis of n-Propanol from CO2 Electroreduction on Bicontinuous Cu2O/Cu Nanodomains.

n-propanol is an important pharmaceutical and pesticide intermediate. To produce n-propanol by electrochemical reduction of CO2 is a promising way, but is largely restricted by the very low selectivity and activity. How to promote the coupling of *C1 and *C2 intermediates to form the *C3 intermediate for n-propanol formation is challenging. Here, we propose the construction of bicontinuous structure of Cu2O/Cu electrocatalyst, which consists of ultra-small Cu2O nanodomains, Cu nanodomains and large amounts of grain boundaries between Cu2O and Cu nanodomains. The n-propanol current density is as high as 101.6 mA cm-2 at the applied potential of -1.1 V vs. reversible hydrogen electrode in flow cell, with the Faradaic efficiency up to 12.1 %. Moreover, the catalyst keeps relatively stable during electrochemical CO2 reduction process. Experimental studies and theoretical calculations reveal that the bicontinuous structure of Cu2O/Cu can facilitate the *CO formation, *CO-*CO coupling and *CO-*OCCO coupling for the final generation of n-propanol.

Surface Engineering of Biochar Toward Simultaneously Generating Superamphiphilicity and Catalytic Activity for Strengthening Pickering Interfacial Catalysis.

Multifunctional carbon materials have revealed distinctive features and excellent performance in the field of catalysis. However, the facile fabrication of bifunctional carbon materials with special wettability and catalytic activity remains a grand challenge in Pickering emulsion catalysis. Herein, we reported one-step construction of bifunctional biochar with superamphiphilicity and catalytic activity directly from the thermolysis of sawdust and 1-butyl-3-methylimidazolium tetrafluoroborate for enhancing the oxidation of benzyl alcohol in Pickering emulsion. Co-doping of B and F enhanced the hydrophilicity of biochar, and the oleophilicity of biochar was kept simultaneously. Conversion became 4 times using bifunctional biochar compared with blank results during the oxidation of benzyl alcohol. More interestingly, the turnover frequency (TOF) value using bifunctional biochar enhanced 61 % than that employing N-doped superamphiphilic carbon without catalytic activity. Catalytic activities of bifunctional biochar could be ascribed to the existence of different chemical bonds containing the element B. This work paves a path toward rational design of bifunctional biochar materials with special wettability and catalytic activity for greatly enhancing the liquid-liquid biphasic reaction efficiencies.