Assessment of effectiveness in stabilization/solidification of arsenic-contaminated soil: long-term leaching test and geophysical measurement.

This study focused on evaluating the effectiveness of stabilizer/binding agents in immobilizing arsenic (As) in contaminated soil using both geochemical and geophysical monitoring methods. The effluent from the stabilizer/binding agent's application and control columns was analyzed, and the status of the columns was monitored using electrical resistivity (ER) and induced polarization (IP) methods. As stabilizers/binder, acid mine drainage sludge (AMDS) and steel slag (SS) were used, which delayed As and Ca leaching time and significantly reduced As leaching amount. Determination coefficients for As and Fe leaching exhibited elevated values (control column, R2 = 0.955; AMDS column, R2 = 0.908; and SS column, R2 = 0.833). A discernible decline in the concentration of leached Fe was accompanied by a corresponding reduction in IP. The determination coefficients correlating IP and Fe leaching remained substantial (control column, R2 = 0.768; AMDS column, R2 = 0.807; and SS column, R2 = 0.818). Such IP measurements manifest as instrumental tools in monitoring and assessing the retention capacity of applied stabilizer/binding agents in As-affected soils, thereby furnishing crucial data for the enduring surveillance of stabilization/solidification locales. This research posits a swift and continuous monitoring method for solidification/stabilization locales in situ.

Electrode reconstruction strategy for oxygen evolution reaction: maintaining Fe-CoOOH phase with intermediate-spin state during electrolysis.

Computational calculations and experimental studies reveal that the CoOOH phase and the intermediate-spin (IS) state are the key factors for realizing efficient Co-based electrocatalysts for the oxygen evolution reaction (OER). However, according to thermodynamics, general cobalt oxide converts to the CoO2 phase under OER condition, retarding the OER kinetics. Herein, we demonstrate a simple and scalable strategy to fabricate electrodes with maintaining Fe-CoOOH phase and an IS state under the OER. The changes of phase and spin states were uncovered by combining in-situ/operando X-ray based absorption spectroscopy and Raman spectroscopy. Electrochemical reconstruction of chalcogenide treated Co foam affords a highly enlarged active surface that conferred excellent catalytic activity and stability in a large-scale water electrolyzer. Our findings are meaningful in that the calculated results were experimentally verified through the operando analyses. It also proposes a new strategy for electrode fabrication and confirms the importance of real active phases and spin states under a particular reaction condition.

Unraveling CoNiP-CoP2 3D-on-1D Hybrid Nanoarchitecture for Long-Lasting Electrochemical Hybrid Cells and Oxygen Evolution Reaction.

Evolving cost-effective transition metal phosphides (TMPs) using general approaches for energy storage is pivotal but challenging. Besides, the absence of noble metals and high electrocatalytic activity of TMPs allow their applicability as catalysts in oxygen evolution reaction (OER). Herein, CoNiP-CoP2 (CNP-CP) composite is in situ deposited on carbon fabric by a one-step hydrothermal technique. The CNP-CP reveals hybrid nanoarchitecture (3D-on-1D HNA), i.e., cashew fruit-like nanostructures and nanocones. The CNP-CP HNA electrode delivers higher areal capacity (82.8 µAh cm-2 ) than the other electrodes. Furthermore, a hybrid cell assembled with CNP-CP HNA shows maximum energy and power densities of 31 µWh cm-2 and 10.9 mW cm-2 , respectively. Exclusively, the hybrid cell demonstrates remarkable durability over 30 000 cycles. In situ/operando X-ray absorption near-edge structure analysis confirms the reversible changes in valency of Co and Ni elements in CNP-CP material during real-time electrochemical reactions.  Besides, a quasi-solid-state device unveils its practicability by powering electronic components. Meanwhile, the CNP-CP HNA verifies its higher OER activity than the other catalysts by revealing lower overpotential (230 mV). Also, it exhibits relatively small Tafel slope (38 mV dec-1 ) and stable OER activity over 24 h. This preparation strategy may initiate the design of advanced TMP-based materials for multifunctional applications.

Effective production of human growth factors in Escherichia coli by fusing with small protein 6HFh8.

BACKGROUND: Growth factors (GFs) are signaling proteins that affect cellular processes such as growth, proliferation, and differentiation. GFs are used as cosmeceuticals, exerting anti-wrinkle, anti-aging, and whitening effects, and also as pharmaceuticals to treat wounds, growth failure, and oral mucositis. However, in mammalian and bacterial cells, low productivity and expression in inclusion bodies, respectively, of GFs does not satisfy the consumer demand. Here, we aimed to develop a bacterial expression system that produces high yields of soluble GFs that can be purified in their native forms. RESULTS: We present Fh8, an 8-kDa peptide from Fasciola hepatica with an N-terminal hexa-histidine (6HFh8), as a fusion partner for enhanced human GF production in recombinant Escherichia coli. The fusion partner harboring a tobacco etch virus (TEV) protease cleavage site was fused to the N-terminus of 10 human GFs: acidic and basic fibroblast growth factors (aFGF and bFGF, respectively), epidermal growth factor (EGF), human growth hormone (hGH), insulin-like growth factor 1 (IGF-1), vascular endothelial growth factor 165 (VEGF165), keratinocyte growth factor 1 (KGF-1), placental growth factor (PGF), stem cell factor (SCF), and tissue inhibitor of metalloproteinase 1 (TIMP-1). The fusion proteins were expressed in E. coli under the control of T7 promoter at three temperatures (25 °C, 30 °C, and 37 °C). All individual fusion proteins, except for SCF and TIMP-1, were successfully overexpressed in cytoplasmic soluble form at more than one temperature. Further, the original aFGF, IGF-1, EGF, and VEGF165 proteins were cleaved from the fusion partner by TEV protease. Five-liter fed-batch fermentation approaches for the 6HFh8-aFGF (lacking disulfide bonds) and 6HFh8-VEGF165 (a cysteine-rich protein) were devised to obtain the target protein at concentrations of 9.7 g/l and 3.4 g/l, respectively. The two GFs were successfully highly purified (> 99% purity). Furthermore, they exerted similar cell proliferative effects as those of their commercial equivalents. CONCLUSIONS: We demonstrated that 6HFh8-GF fusion proteins could be overexpressed on a g/l scale in the cytoplasm of E. coli, with the GFs subsequently highly purified and maintaining their biological activity. Hence, the small protein 6HFh8 can be used for efficient mass-production of various GFs.

Engineering Yarrowia lipolytica for de novo production of tetraacetyl phytosphingosine.

AIMS: To genetically engineer the oleaginous yeast Yarrowia lipolytica for de novo production of tetraacetylphytosphingosine (TAPS), a precursor of phytosphingosine, and optimization of fermentation conditions for high yield. METHODS AND RESULTS: We successfully constructed a TAPS-producing Y. lipolytica CE3 strain by co-expression of Wickerhamomyces ciferrii-derived acetyl transferases, Sli1p and Atf2p. Next, we optimized several environmental factors including temperature, initial pH and C/N ratio for TAPS production in a shake culture. Deletion of LCB4 in CE3 strain increased the volumetric TAPS titre and cell-specific yield to 142·1 ± 10·7 mgTAPS  l-1 and 3·08 ± 0·11 mgTAPS  gDCW -1 , respectively, in a shake flask culture incubated for 120 h at 28°C with glycerol as the carbon source. Finally, we developed a 5-l fed-batch process with NaOH-mediated pH control and olive oil as a carbon source, exhibiting 650 ± 24 mgTAPS  l-1 of TAPS production within 56 h of the fermentation. CONCLUSIONS: The introduction of codon-optimized Sli1p and Atf2p, deletion of LCB4 gene and sexual hybridization, accompanied by specific fermentation conditions, enhanced TAPS yield in Y. lipolytica. SIGNIFICANCE AND IMPACT OF THE STUDY: Our results highlight Y. lipolytica as a promising candidate for the industrial production of TAPS, an important component of cosmetic formulations.