Plastic enzyme-linked immunosorbent assays (ELISA)-on-a-chip biosensor for botulinum neurotoxin A.

A plastic ELISA-on-a-chip (EOC) employing the concept of cross-flow immuno-chromatographic analysis was applied to the measurement of botulinum neurotoxin A (BoNT/A) as agent for bio-terrorism. Two monoclonal antibodies specific to the heavy chain of the toxin were raised and identified to form sandwich binding complexes as the pair with the analyte. For the construction of an immuno-strip, one was utilized as the capture antibody immobilized onto nitrocellulose membrane and the other as the detection coupled to an enzyme, horseradish peroxidase. The two plates of EOC used in this study were fabricated by injection molding of polycarbonate to improve the reproducibility of manufacture and, after inclusion of the immuno-strip, bonded using a UV-sensitive adhesive. Under optimal conditions of analysis, the chip produced a color signal in proportion to the analyte dose and the signal was quantified using a detector equipped with a digital camera. From the dose-response curve, the detection limit of BoNT/A was 2.0 ng mL(-1), approximately five times more sensitive than a commercial-version detection kit employing colloidal gold tracer.

Plastic ELISA-on-a-chip based on sequential cross-flow chromatography.

A plastic chip that can perform immunoassays using an enzyme as signal generator, i.e., ELISA-on-a-chip, was developed by incorporating an immunostrip into channels etched on the surfaces of the chip. To utilize an analytical concept of cross-flow chromatography, the chip consisted of two cross-flow channels in the horizontal and vertical directions. In the vertical channel, we placed a 2-mm-wide immunostrip for cardiac troponin I (cTnI), which was identical to a conventional rapid test kit except for the utilization of an enzyme, horseradish peroxidase (HRP), as tracer. An enzyme substrate supply channel and a horizontal flow absorption pad compartment were transversely arranged on each lateral side of the signal generation pad of the strip, respectively. Upon application of a sample containing cTnI, it migrated vertically through the membrane strip by capillary action, and antigen-antibody binding occurred. After 15 min, the horizontal flow was initiated by the addition of a chromogenic substrate solution for HRP into the supply channel and by partial superimposition of the horizontal flow absorption pad onto the signal generation pad. A color signal proportional to the analyte concentration was produced on this pad, measured after 5 min as optical densities using a digital camera-based detector, and quantified by integration of the densities under the peak after normalization. Its calibration curve indicated that the detection limit of the chip was approximately 0.1 ng/mL and its quantification limit was 0.25 ng/mL. In measuring blindly prepared samples, the chip performance correlated with that of a reference system, Beckman Coulter Access, within 2.5-fold discrepancy at the detection limit.