TRIB3 promotes the growth of oral squamous cell carcinoma by regulating JNK/JUN-mediated aerobic glycolysis.

OBJECTIVE: The potentiation of glycolysis is a leading driver of squamous cell carcinoma. Targeted modulation of the glycolytic process might be a pivotal tool for treating squamous cell carcinoma. Tribble homolog 3 (TRIB3) expression is elevated in some squamous cell carcinomas and correlates with poor prognosis. We investigated whether increased TRIB3 expression contributes to the progression of oral squamous cell carcinoma (OSCC) by modulating glycolysis. METHODS: We analyzed the expression of TRIB3 in the TCGA database for clinical tissue samples, in vitro, and in vivo. Cell proliferation, migration, invasion, and apoptosis were observed by overexpressing or knocking down TRIB3. Crucially, the impact of TRIB3 on aerobic glycolysis in OSCC was also probed in our study, including glucose uptake, lactate content, ATP production, extracellular acidification rate, and oxygen consumption rate. Importantly, we examined the relationship between TRIB3 and the JNK/JUN pathway and whether it regulates glycolytic processes in OSCC cells through the JNK/JUN pathway. Finally, tumor growth in vivo was tested using Xenograft models to observe the effect of knockdown TRIB3. RESULTS: Our study identified TRIB3 as the most variable and prognostic in OSCC. A significant high expression of TRIB3 in OSCC cells was determined in vitro and promoted cell proliferation, migration, invasion, apoptosis, and aerobic glycolysis. Knockdown of TRIB3 produced opposite effects. In addition, these effects are regulated by the JNK/JUN pathway. The use of JNK inhibitor inhibited the pro-growth and glycolytic effects of TRIB3 on OSCC cells. Finally, we further determined that TRIB3 knockdown would effectively suppress tumor growth in vivo. CONCLUSION: This study reveals that TRIB3 promotes OSCC growth by regulating JNK/JUN pathway-mediated aerobic glycolysis, and TRIB3 may be a potential target for treating OSCC.

Hesperidin ameliorates H2O2-induced bovine mammary epithelial cell oxidative stress via the Nrf2 signaling pathway.

BACKGROUND: Hesperidin is a citrus flavonoid with anti-inflammatory and antioxidant potential. However, its protective effects on bovine mammary epithelial cells (bMECs) exposed to oxidative stress have not been elucidated. RESULTS: In this study, we investigated the effects of hesperidin on H2O2-induced oxidative stress in bMECs and the underlying molecular mechanism. We found that hesperidin attenuated H2O2-induced cell damage by reducing reactive oxygen species (ROS) and malondialdehyde (MDA) levels, increasing catalase (CAT) activity, and improving cell proliferation and mitochondrial membrane potential. Moreover, hesperidin activated the Keap1/Nrf2/ARE signaling pathway by inducing the nuclear translocation of Nrf2 and the expression of its downstream genes NQO1 and HO-1, which are antioxidant enzymes involved in ROS scavenging and cellular redox balance. The protective effects of hesperidin were blocked by the Nrf2 inhibitor ML385, indicating that they were Nrf2 dependent. CONCLUSIONS: Our results suggest that hesperidin could protect bMECs from oxidative stress injury by activating the Nrf2 signaling pathway, suggesting that hesperidin as a natural antioxidant has positive potential as a feed additive or plant drug to promote the health benefits of bovine mammary.

Gradient-Janus Wires for Simultaneous Fogwater Harvesting and Electricity Generation.

A Gradient-Janus wire (GJW) with a diameter of 0.3 mm has been fabricated on a large scale through liquid confined modification, enabling the opposite conical wetting phenomenon along the same orientation of the GJW, characterized by an increasing superhydrophilic region and a decreasing hydrophobic region. This property allows the GJW to exhibit controllable water hovering, transport, and pinning during fog harvesting, i.e., at a large tilting angle α of 60° (mass increased with decreased α), the GJW can hover 0.6 mg of harvested fogwater in 30 s, can transport 3 mg of fogwater along the gradient in 30 s at α = 4° (with maximal mass reaching up to 4.3 mg at α = -10°), and finally, pin the water droplet at the end of the GJW. Such ability generates an effective torque that serves as the driving force for rotation. We designed a GJWs-wheel by radially arranging 60 GJWs together, resulting in an extremely lightweight structure weighing only 1.9 g. The cumulative torque generated during fog harvesting activates the rotation of the GJWs-wheel. When loaded with a coil within a magnetic field, electricity is generated as output power peaks at around 0.25 µW while maintaining a high water harvesting efficiency averaging approximately 38 ± 2.12 mg/min. This finding is significant as it provides valuable insights into designing materials capable of efficiently harnessing both energy and water resources.

Lower Gluteal Liposuction Combined With Upper Gluteal and Infragluteal Region Fat Grafting: A Novel Concept to Improve Gluteal Ptosis.

BACKGROUND: Gluteal ptosis results in a severe disturbance of gluteal aesthetics. Currently, satisfactory procedures for improving gluteal ptosis are lacking. OBJECTIVES: To improve gluteal ptosis, the authors propose a novel concept of combined liposuction of the lower gluteal region and fat grafting to the upper gluteal and infragluteal regions, and verify its efficacy and safety. METHODS: Patients who underwent liposuction of the lower gluteal region combined with fat grafting to the upper gluteal and infragluteal regions between January 2020 and July 2023 were retrospectively reviewed. Postoperative changes in the gluteal ptosis grade, complications, and patient satisfaction were evaluated. RESULTS: A total of 28 patients were enrolled in this study; 21 (75.0%) patients had gluteal ptosis grade 4 and 7 (25.0%) patients had gluteal ptosis grade 5. The median fat removal volume was 210 mL, and the median fat graft injected volume was 355 mL in the gluteal region and 180 mL in the infragluteal region. All patients showed improvement in gluteal ptosis; 16 (57.1%) patients improved by 1 grade and 12 (42.9%) patients showed a 2-grade improvement. All patients were satisfied with their posttreatment outcomes. Only 1 patient showed lateral translocation of the fat graft. No other complications were observed. CONCLUSIONS: Liposuction of the lower gluteal region combined with fat grafting to the upper gluteal and infragluteal regions is effective in improving gluteal ptosis, with a low risk of complications and high patient satisfaction.

Efficacy and safety of platelet-rich plasma in the treatment of venous ulcers: A systematic review and meta-analysis of randomized controlled trials.

Considering the substantial impact of venous ulcers on quality of life and healthcare systems, this study evaluated the efficacy and safety of platelet-rich plasma (PRP) in comparison to conventional therapy. A systematic review of four databases identified 16 randomized clinical trials, including 20 study groups. PRP significantly enhanced complete ulcer healing, exhibiting an odds ratio (OR) of 5.06 (95% confidence interval [CI]: 2.35-10.89), and increased the percentage of healed ulcer area by a mean difference of 47% (95% CI: 32%-62%). Additionally, PRP shortened the time required for complete healing by an average of 3.25 months (95% CI: -4.06 to -2.43). Although pain reduction was similar in both groups, PRP considerably decreased ulcer recurrence rates (OR = 0.16, 95% CI: 0.05-0.50) without increasing the risks of infection or irritative dermatitis. These results suggest PRP as a viable, safe alternative for venous ulcer treatment, providing significant improvements in healing outcomes.

Efficacy and Safety of Platelet-Rich Plasma for Pressure Ulcers: A Systematic Review and Meta-Analysis of Randomized Controlled Trials.

Pressure ulcers are common chronic wounds in clinical practice, severely affecting patients' quality of life and causing substantial economic burdens. Platelet-rich plasma (PRP) has been explored for its potential in treating pressure ulcers. Herein, a study was carried out to evaluate the efficacy and safety of PRP in comparison to conventional treatments for pressure ulcers. A comprehensive search was conducted in databases including PubMed, Embase, Web of Science, and Cochrane Library, covering studies published from the inception to May 20, 2023, with only randomized controlled trials (RCTs) assessing the effect of PRP on the healing of pressure ulcers included. The outcomes of interest included healing rates, ulcer area, ulcer volume, Pressure Ulcer Scale for Healing (PUSH) score, healing time, and complications. Finally, 9 RCTs, involving 511 patients with 523 pressure ulcers, met the inclusion criteria. Our meta-analysis revealed a significant improvement in the healing rate, as evidenced by a weighted odds ratio (OR) of 3.40 (95% CI = 1.87 to 6.21, I2 = 32%, P < 0.0001). Additionally, the standard mean difference (SMD) for healed ulcer area favored the PRP group, reflecting an improvement of 1.38 cm2 (P = 0.02). Furthermore, the reduction in PUSH scores within the PRP group outperformed that observed in the control group, demonstrating a SMD of 1.69 (P = 0.01). Nevertheless, complications and the SMD for ulcer volume reduction revealed no statistically significant differences between the groups. From these findings, PRP stands out as a promising and safe therapeutic approach for pressure ulcers. For a deeper understanding of PRP's role in pressure ulcer healing, it is crucial to conduct more well-structured, high-quality RCTs in upcoming studies.

Application of Botulinum Toxin at the Yonsei Point for the Treatment of Gummy Smile: A Randomized Controlled Trial.

BACKGROUND: Demand for less-invasive procedures for treating gummy smile, such as botulinum toxin A injections, has increased substantially over the years. Meanwhile, the optimal injection site for botulinum toxin A injection is debated. The authors aimed to investigate the efficacy of botulinum toxin A injection at the Yonsei point for treating gummy smile. METHODS: In this double-blind, single-site, randomized clinical trial, healthy participants with a gummy smile (anterior gingival exposure of ≥3.0 mm) were enrolled and randomized (1:1 ratio) into two groups. The experimental group was administered 6 U of botulinum toxin A at the Yonsei point (a single-site injection of 3 U to the right Yonsei point and 3 U to the left Yonsei point), and the control group received the same dose in the bilateral levator labii superioris alaeque nasi muscle sites. The patients were assessed at baseline and 4, 12, 24, and 48 weeks after the first injection using a digital vernier caliper. RESULTS: A total of 49 participants were enrolled. Anterior and bilateral posterior gingival exposure were reduced at 4, 12, and 24 weeks ( P ≤ 0.05) and returned to baseline at 48 weeks in both groups; there was no difference between the groups at these time points. The increase in satisfaction among patients was significant, and few adverse events were observed. CONCLUSION: Both the Yonsei point and the levator labii superioris alaeque nasi muscle site can be used as botulinum toxin A injection sites for treating gummy smile. CLINICAL QUESTION/LEVEL OF EVIDENCE: Therapeutic, I.

Robust Photothermal Icephobic Surface with Mechanical Durability of Multi-Bioinspired Structures.

Photothermal superhydrophobic surfaces are potential to become ideal anti-/deicing surfaces due to their rapid water removal, icing delay, and photothermal deicing performance. Here, a robust photothermal icephobic surface with mechanical durability is shown that is integrated with a microspine array inspired by honeycomb and cactus thorn (i.e., MAHC), which is developed by a laser-layered microfabrication strategy. The maximum stress on the microspine of the MAHC is reduced by ≈2/3, due to the protection of the bionic honeycomb structure. Even after 200 linear abrasions by a steel blade, the MAHC remains superior water repellency with a water contact angle of 150.7° and roll-off angles of 10.3°, stable icing delay time (578.2 s), and rapidly photothermal deicing capabilities (401 s). As the MAHC is fabricated on a curvature surface such as a copper alloy transmission line for an overhead high-speed rail, a stable photothermal anti-/deicing in a low-temperature environment still can be achieved effectively. The freezing rain covering the functional transmission line completely slides off within 758 s under one sun illumination. This studying offers insight into the design of novel materials with stable anti-icing/icephobic structures, which would be extended into some applied realms, for example, transportation fields or power systems in cold or low-temperature climates.

Buccal Fat Pad Augmentation for Midfacial Rejuvenation: Modified Fat Grafting Technique and Ogee Line Remodeling.

BACKGROUND: The volume and position of the buccal fat pad (BFP) change with age, which manifests as a hollow midface. Previous studies showed that autologous fat grafting for BFP augmentation could effectively ameliorate midfacial hollowing. OBJECTIVES: The aim of this study was to introduce a modified fat grafting technique for female patients with midfacial hollowing to restore the volume of BFP, and to evaluate the safety and effectiveness of this approach. METHODS: Two cadavers were used for the dissection of the BFP and to demonstrate the surgical procedures. Forty-eight patients were treated for midfacial hollowing with the modified grafting strategy. The BFP was filled through a percutaneous zygomatic incision and an immediate amelioration in the hollow area was observed. Improvements were evaluated from measurements of the ogee line and ogee angle, FACE-Q questionnaires, and 3-party satisfaction ratings. Clinical profiles were reviewed and statistically analysed. RESULTS: The mean [standard deviation] ogee angle was 6.6° [1.9°] preoperatively and 3.9° [1.4°] postoperatively (average reduction, 2.7°). Patients' ogee lines were smoother postoperatively, with marked improvements in overall appearance, psychological well-being, and social confidence. Patients reported high satisfaction with decision-making and postoperative outcomes and felt 6.61 [2.21] years younger. Overall, 88%, 76%, and 83% of the cases were graded as good or excellent in improvement by surgeon, patient, and the third party, respectively. CONCLUSIONS: For age-dependent midfacial hollowing in female patients, the modified percutaneous grafting technique described here was safe and efficacious in restoring BFP volume. This technique produced a smoother ogee line and a natural, younger midfacial contour.

Aesthetic Improvement of Body Proportion Through Trunk Liposculpture: A Waistline-based Strategy.

BACKGROUND: Abdominal contouring through liposuction has been practiced for decades. However, few studies have focused on describing the definition and enhancement of the waistline in torso contouring procedures. OBJECTIVES: In the present study, the authors proposed a waistline-based strategy for abdominal liposculpture to achieve a better aesthetic outcome and emphasize high overall patient satisfaction. METHODS: The data of patients who underwent the waistline-based liposculpture procedure from 2020 to 2023 were retrospectively reviewed. Aesthetic improvement of the central trunk contour was evaluated and analyzed by comparing preoperative and postoperative photogrammetric measurements. Satisfaction with the outcome was assessed with a patient satisfaction questionnaire. RESULTS: A total of 70 patients were enrolled in this study. During 6 months of postoperative evaluation, the shape of the central trunk contour improved significantly (both waist concavity and hip convexity increased quantitatively, P < .05), while the position of the waist did not differ significantly postoperatively (P > .05). All patients were satisfied with their postoperative outcomes, including their overall aesthetic appearance, waistline position, and waist-to-hip ratio. There were no intraoperative complications or rare postoperative complications. CONCLUSIONS: Waistline-based liposculpture is a simple and effective procedure to improve the aesthetic outcomes of trunk contouring and has highly satisfactory results after long-term follow-up.

Blood Metabolites and Faecal Microbial Communities in Nonpregnant and Early Gestation Ewes in Highly Cold Areas.

Ewes undergo complex metabolic changes during pregnancy. Understanding the specific process of these changes is a necessary prerequisite in ewes for regulating and intervening in order to maintain pregnancies. However, there have been relatively few studies on the specific changes that occur in nutritional metabolism in pregnant ewes during early gestation, especially for some landrace ewes in highly cold areas. Therefore, this study aimed to (1) elucidate the changes in metabolites and microbial communities in pregnant ewes during early gestation using metabolomics and 16S ribosomal RNA gene (rDNA) amplicon sequencing approaches, and to (2) discover novel early pregnancy-induced biomarkers in the blood and faeces. Rams were placed together with ewes on D0 and removed on D45. During early gestation, blood and faecal samples were collected from ewes in a highly cold area for analysing the metabolites and microbial communities; these were retrospectively classified as the early gestation pregnant (EP) ewe group or the nonpregnant (NP) ewe group based on the lambing status recorded during the expected delivery period. The differences in the plasma biochemical parameters, plasma metabolites, and faecal microbial communities of pregnant and nonpregnant ewes were characterised. The GC, IL-6, O-acetyl-l-serine, L-glutamine, and 6-acetamido-2-oxohexanoic acid were screened out as potential biomarkers for evaluating the occurrence of early pregnancy. These novel early pregnancy-induced metabolites discovered in ewes might allow for the development of technologies to detect early pregnancies in sheep in highly cold areas.

The impact of SARS-Cov-2 infection on the periocular injection pain and hypersensitive reaction to botulinum toxin type A: results from clinical questionnaires.

Background: The COVID-19 pandemic has brought about significant changes in the medical field, yet the use of botulinum toxin type A has remained uninterrupted. Plastic surgeons must carefully consider the timing of administering botulinum toxin type A to patients who have recovered from COVID-19. Methods: A questionnaire survey was conducted among patients who had contracted and recovered from SARS-CoV-2 within a month. The survey aimed to investigate various indicators in patients who had received botulinum toxin A injections at the same site before and after their infection, including pain scores and allergic reactions and the occurrence of complications. Results: The pain scores of patients who contracted SARS-CoV-2 infection between 14-21 days post-infection exhibited significant variation from previous injections. However, patients who contracted the infection between 22-28 days post-infection did not exhibit significant variation from previous injections. Furthermore, the incidence of allergic reactions and complications following botulinum toxin injection within one month after contracting the infection did not significantly differ from that observed prior to infection. Conclusion: Administering botulinum toxin type A three weeks after COVID-19 recovery is a justifiable and comparatively secure approach.

Highly Efficient Photothermal Icephobic/de-Icing MOF-Based Micro and Nanostructured Surface.

Photothermal materials have gained considerable attention in the field of anti-/de-icing due to its environmental friendliness and energy saving. However, it is always significantly challenging to obtain solar thermal materials with hierarchical structure and simultaneously demonstrate both the ultra-long icing delay ability and the superior photothermal de-icing ability. Here, a photothermal icephobic MOF-based micro and nanostructure surface (MOF-MNS) is presented, which consists of micron groove structure and fluorinated MOF nanowhiskers. The optimal MOF-M250 NS can achieve solar absorption of over 98% and produce a high temperature increment of 65.5 °C under 1-sun illumination. Such superior photothermal-conversion mechanism of MOF-M250 NS is elucidated in depth. In addition, the MOF-M250 NS generates an ultra-long icing delay time of ≈3960 s at -18 °C without solar illumination, achieving the longest delay time, which isn't reported before. Due to its excellent solar-to-heat conversation ability, accumulated ice and frost on MOF-M250 NS can be rapidly melted within 720 s under 1-sun illumination and it also holds a high de-icing rate of 5.8 kg m-2 h-1 . MOF-M250 NS possesses the versatility of mechanical robustness, chemical stability, and low temperature self-cleaning, which can synergistically reinforce the usage of icephobic surfaces in harsh conditions.

Interaction of lncRNA Gm2044 and EEF2 promotes estradiol synthesis in ovarian follicular granulosa cells.

The functions and molecular mechanisms of long noncoding RNA (lncRNA) in reproduction have been widely studied at present. However, lncRNA regulating hormone synthesis in ovarian follicular granulosa cells has not been sufficiently studied. Our previous research demonstrated that lncRNA Gm2044 could promote estradiol synthesis in follicular granulosa cells. In this study, we identified 21 binding proteins of lncRNA Gm2044 in ovarian follicles using comprehensive identification of RNA-binding proteins by mass spectrometry (ChIRP-MS). RNA immunoprecipitation (RNA IP) and reverse transcription PCR (RT-PCR) confirmed that lncRNA Gm2044 can interact with eukaryotic translation elongation factor 2 (EEF2) protein. Furthermore, we constructed lncRNA Gm2044 knockout mice using the CRISPR/Cas9 method. Although the follicular development and fertility of female lncRNA Gm2044 knockout mice were not affected, the serum estradiol concentration in female lncRNA Gm2044 knockout mice significantly decreased. Western blotting and ELISA revealed that lncRNA Gm2044 may promote the binding of EEF2 to Nr5a1 mRNA and then enhance the Nr5a1 mRNA translation, and the upregulated NR5A1 protein can strengthen estradiol synthesis. To determine the potential signaling pathway of lncRNA Gm2044 regulating estradiol synthesis, transcriptome sequencing was performed for ovaries of adult lncRNA Gm2044 knockout mice, which identified 565 significant up-regulated genes and 303 significant down-regulated genes, which were then analyzed with Gene Ontology (GO) and the Kyoto Encyclopedia of Genes and Genomes (KEGG) and validated by molecular experiments. Understanding how lncRNA Gm2044/EEF2 protein regulates estradiol synthesis will help treat estrogen-related reproductive diseases.

Ultra-Narrow Bandwidth Microwave Photonic Filter Implemented by Single Longitudinal Mode Parity Time Symmetry Brillouin Fiber Laser.

In this paper, a novel microwave photonic filter (MPF) based on a single longitudinal mode Brillouin laser achieved by parity time (PT) symmetry mode selection is proposed, and its unparalleled ultra-narrow bandwidth as low as to sub-kHz together with simple and agile tuning performance is experimentally verified. The Brillouin fiber laser ring resonator is cascaded with a PT symmetric system to achieve this MPF. Wherein, the Brillouin laser resonator is excited by a 5 km single mode fiber to generate Brillouin gain, and the PT symmetric system is configured with Polarization Beam Splitter (PBS) and polarization controller (PC) to achieve PT symmetry. Thanks to the significant enhancement of the gain difference between the main mode and the edge mode when the polarization state PT symmetry system breaks, a single mode oscillating Brillouin laser is generated. Through the selective amplification of sideband modulated signals by ultra-narrow linewidth Brillouin single mode laser gain, the MPF with ultra-narrow single passband performance is obtained. By simply tuning the central wavelength of the stimulated Brillouin scattering (SBS) pumped laser to adjust the Brillouin oscillation frequency, the gain position of the Brillouin laser can be shifted, thereby achieving flexible tunability. The experimental results indicate that the MPF proposed in this paper achieves a single pass band narrow to 72 Hz and the side mode rejection ratio of more than 18 dB, with a center frequency tuning range of 0-20 GHz in the testing range of vector network analysis, which means that the MPF possesses ultra high spectral resolution and enormous potential application value in the domain of ultra fine microwave spectrum filtering such as radar imaging and electronic countermeasures.

Efficient Atmospheric Water Harvesting of Superhydrophilic Photothermic Nanocapsule.

Drought and water scarcity are two of the world's major problems. Solar-powered sorption-based atmospheric water harvesting technology is a promising solution in this category. The main challenge is to design materials with high water harvesting performance while achieving fast water vapor adsorption/desorption rates. Here, a superhydrophilic photothermic hollow nanocapsule (SPHN) is represented that achieves efficient atmospheric water harvesting in outdoor climates. In SPHN, the hollow mesoporous silica (HMS) is grafted with polypyrrole (PPy) and also loaded with lithium chloride (LiCl). The hollow structure is used to store water while preventing leakage. The hydrophilic spherical nanocapsule and the trapped water produce more free and weakly adsorbed water. Significantly lower the heat of desorption compared to pure LiCl solution. Such SPHN significantly improves the adsorption/desorption kinetics, e.g., absorbs 0.78-2.01 g of water per gram of SPHN at 25 °C, relative humidity (RH) 30-80% within 3 h. In particular, SPHN has excellent photothermal properties to achieve rapid water release under natural sunlight conditions, i.e., 80-90% of water is released in 1 h at 0.7-1.0 kW m-2 solar irradiation, and 50% of water is released even at solar irradiation as low as 0.4 kW m-2 . The water collection capacity can reach 1.2 g g-1 per cycle by using the self-made atmospheric water harvesting (AWH) device. This finding provides a way to design novel materials for efficient water harvesting tasks, e.g., water engineering, freshwater generator, etc.

Oxidation and exothermic properties of long flame coal spontaneous combustion under solid-liquid-gas coexistence and its microscopic mechanism analysis.

Coal spontaneous combustion (CSC) wastes valuable resources and does great damage to the environment. To study the oxidation and exothermic properties of CSC under solid-liquid-gas coexistence conditions, a C600 microcalorimeter was used to analyze the heat released by the oxidation of raw coal (RC) and water immersion coal (WIC) under different air leakage (AL) conditions. The experimental results showed that the AL was negatively correlated with the heat release intensity (HRI) in the initial stages of coal oxidation, but as the oxidation proceeded, the AL and the HRI gradually showed positive correlations. The HRI of the WIC was lower than that of the RC under the same AL conditions. However, since water participated in the generation and transfer of free radicals in the coal oxidation reaction and promoted the development of coal pores, the HRI growth rate of the WIC was higher than that of the RC during the rapid oxidation period, and the self-heating risk was higher. The heat flow curves for the RC and WIC in the rapid oxidation exothermic stage could be fitted with quadratic functions. The experimental results provide an important theoretical basis for the prevention of CSC.

Cardiac-specific overexpression of catalase attenuates lipopolysaccharide-induced cardiac anomalies through reconciliation of autophagy and ferroptosis.

Lipopolysaccharide (LPS) from Gram-negative bacteria is a major contributor to cardiovascular failure, but the signaling mechanisms underlying its stress response are not fully understood. This study aimed to investigate the effect of the antioxidant enzyme catalase on LPS-induced cardiac abnormalities and the mechanisms involved, with particular focus on the interplay between autophagy, ferroptosis, and apoptosis. Cardiac-specific catalase (CAT) overexpression and wild-type (WT) mice were stimulated with LPS (6 mg/kg, intravenous injection), and cardiac morphology and function were evaluated. Oxidative stress, ferroptosis, apoptosis, and mitochondrial status were monitored, and survival curves were plotted based on the results of LPS stimulation. The results showed that, compared with WT mice, mice overexpressing catalase had a higher survival rate under LPS stimulation. Ultrasound echocardiography, cardiomyocyte characteristics, and Masson's trichrome staining showed that LPS inhibited cardiac function and caused cardiac fibrosis, while catalase alleviated these adverse effects. LPS increased apoptosis (TUNEL, caspase-3 activation, cleaved caspase-3), increased O2·- production, induced inflammation (TNF-α), autophagy, iron toxicity, and carbonyl damage, and significantly damaged mitochondria (mitochondrial membrane potential, mitochondrial proteins, and ultrastructure). These effects were significantly alleviated by catalase. Interestingly, the antioxidant N-acetylcysteine, autophagy inhibitor 3-methyladenine, and ferroptosis inhibitor lipostatin-1 all eliminated the LPS-induced contraction dysfunction and ferroptosis (using lipid peroxidation). Induction of ferroptosis could eliminate the cardioprotective effect of NAC. In conclusion, catalase rescues LPS-induced cardiac dysfunction by regulating oxidative stress, autophagy, ferroptosis, apoptosis, and mitochondrial damage in cardiomyocytes.

Effects of organic and inorganic selenium on selenium bioavailability, growth performance, antioxidant status and meat quality of a local beef cattle in China.

Selenium (Se) is an essential nutrient with multiple health benefits to humans and animals. Cattle generally require dietary Se supplementation to meet their daily requirements. The two main forms of dietary Se in cattle are organic Se and inorganic Se. Data comparing the health and productivity effects of organic Se and inorganic Se on cattle are still insufficient, and it is necessary to conduct more research to evaluate the bioavailability, nutritional value, deposition, and body functions of Se sources in different breeds and physiological stages of cattle raised in areas with different Se levels. The objectives of this study were to determine the effects of organic and inorganic sources of Se on plasma biochemical indices, Se bioavailability, deposition in body tissues and organs, growth performance, antioxidant capacity and meat quality of beef cattle raised in Se-deficient areas. Fifteen Chinese Xiangzhong Black beef cattle with an average weight of 254.5 ± 8.85 kg were assigned to three dietary groups. The three groups were fed the same basal ration and supplemented with either an inorganic [sodium selenite (SS)] or organic [selenomethionine (SM) or Se-enriched yeast (SY)] source of Se (0.1 mg/kg dry matter) for 60 days. At the end of the experiment, three cattle from each group were randomly selected and slaughtered, and samples were collected from tissues and organs for analysis. The results revealed that growth performance, slaughter performance, Se content of tissues and organs, meat quality characteristics including chemical composition, pH45min, pH24h, drip loss, and cooking losses did not differ (p > 0.05) due to supplementation of the different organic and inorganic sources of Se. SM and SY were more effective in increasing (p < 0.05) immunoglobulin M (IgM) concentrations in the blood and reducing (p < 0.05) malondialdehyde (MDA) content in the longissimus dorsi than SS. In conclusion, organic Se is more effective than inorganic Se in improving the immune and antioxidant capacity of Chinese Xiangzhong Black beef cattle.