Consistent Dosing Through the Salmeterol-Fluticasone Propionate Easyhaler for the Management of Asthma and Chronic Obstructive Pulmonary Disease: Robustness Analysis Across the Easyhaler Lifetime.

Background: Easyhaler (registered trademark by Orion Corporation) is a multidose dry powder inhaler (DPI) for the treatment of asthma and chronic obstructive pulmonary disease (COPD), designed to be simple and easy to use. Salmeterol-fluticasone propionate (S-F) Easyhaler (50/250 and 50/500 µg per dose), available in several European countries, provides combined inhaled corticosteroid and long-acting beta agonist therapy for the management of asthma and COPD. A requirement of the European Committee for Medical Products for Human Use guidelines is to demonstrate product performance under conditions that mimic real-life patient use. Therefore, our aims were to assess the robustness of the S-F Easyhaler by assessing the delivered dose (DD) and fine particle dose (FPD) throughout the inhaler lifespan and under simulated environmental stress conditions. Methods: This was a noncomparative exploratory in vitro study. Two batches and six to nine inhalers per batch from both dose strengths were used to assess drug delivery performance over the inhaler lifespan (doses 1-60). For determining the impact of simulated environmental stress (tests for exposure of dropping, vibration, moisture, and freeze-thawing) on DD and FPD, one batch and three inhalers per batch from both dose strengths were used per test, respectively. Aerodynamic particle size distribution was evaluated during the simulated dropping and vibration tests. Results: DD and FPD from both dose strengths of S-F Easyhaler performance remained consistent through the inhaler lifespan and simulated environmental stress did not affect its performance. Similar DD and FPD values were observed with or without dropping, vibration, exposure to moisture, and freeze-thawing, and no inhaler breakages occurred during the simulated tests. Conclusions: The in vitro performance of S-F Easyhaler at both dose strengths suggests that reliable dosing and robustness can be achieved under real-life stress conditions; S-F Easyhaler is a durable DPI for the management of asthma and COPD.

In Vitro Flow Rate Dependency of Delivered Dose and Fine Particle Dose of Salmeterol/Fluticasone Propionate Easyhaler and Seretide Diskus with Patient Flow Rates Collected in a Randomized Controlled Trial.

BACKGROUND: The Easyhaler® device-metered dry powder inhaler containing Salmeterol and Fluticasone propionate (S/F) has been developed for the treatment of patients with asthma and chronic obstructive pulmonary disease (COPD). We report two studies which evaluated the in vitro flow rate dependence of delivered dose (DD) and fine particle dose (FPD) of S/F Easyhaler versus Seretide Diskus®. METHODS: A randomized controlled trial (RCT) assessed inspiratory flow parameters of S/F Easyhaler and Seretide Diskus in subgroups of patients with asthma (children, adolescents and adults, and elderly) and in COPD patients. The 10th, 50th, and 90th percentile airflow rates were determined and utilized in vitro, to evaluate flow rate dependence of DD and FPD. Flow rate dependence was evaluated relative to the result obtained at the 50th percentile and any values deviating from 100% indicated flow rate dependence. The volumetric flow rate dependence (Q) index derived from FPD at 10th and 90th percentile airflows was also evaluated. RESULTS: Overall, 227 patients were enrolled and randomized; 216 completed the RCT. In total, 55.5% of patients were female, and the mean age was 46.3 years. Clinically relevant airflow rates (46, 68, and 85 L/min for S/F Easyhaler and 44, 71, and 96 L/min for Seretide Diskus) were carried forward into the in vitro study, which demonstrated similar flow rate dependence of DD and FPD for S/F Easyhaler compared with Seretide Diskus; all values were within ±15% limits across the 10th, 50th, and 90th percentile airflow rates. Q index results suggested that both S/F Easyhaler and Seretide Diskus are medium airflow-dependent products. CONCLUSIONS: Similar in vitro flow rate dependence of DD and FPD was demonstrated for S/F Easyhaler compared with Seretide Diskus, across a range of clinically relevant airflow rates, collected from patients with asthma and COPD.

Dose uniformity of budesonide Easyhaler® under simulated real-life conditions and with low inspiration flow rates.

Budesonide Easyhaler® multidose dry powder inhaler is approved for the treatment of asthma. Objectives were to determine the delivered dose (DD) uniformity of budesonide Easyhaler® in simulated real-world conditions and with different inspiration flow rates (IFRs). Three dose delivery studies were performed using 100, 200, and 400 µg/dose strengths of budesonide. Dose uniformity was assessed during in-use periods of 4-6 months after exposure to high temperature (30°C) and humidity (60% relative humidity) and after dropping and vibration testing. The influence of various IFRs (31, 43, and 54 L/min) on the DD was also investigated. Acceptable dose uniformity was declared when mean DD were within 80-120% of expected dose; all data reported descriptively. DD was constant (range: 93-109% of expected dose) at all in-use periods and after exposure to high temperature and humidity for a duration of up to 6 months. DD post-dropping and -vibration were unaffected (range 98-105% of expected dose). Similarly, DD was constant and within 10% of expected dose across all IFRs. Results indicate that budesonide Easyhaler® delivers consistently accurate doses in various real-life conditions. Budesonide Easyhaler® can be expected to consistently deliver a uniform dose and improve asthma control regardless of high temperature and humidity or varying IFR.