Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 1 de 1
Filtrar
Mais filtros











Base de dados
Intervalo de ano de publicação
1.
Environ Technol ; 35(1-4): 232-41, 2014.
Artigo em Inglês | MEDLINE | ID: mdl-24600861

RESUMO

The effect of dilute sodium hydroxide (NaOH) on reed straw structural change at 105 degreeC temperature was evaluated in this study. Various concentrations of NaOH (1% to 2.5%) were used for pretreatment of reed straw at 105 degreeC for 10min. Scanning electron microscopy, atomic force microscopy and Fourier transform infrared spectroscopy studies showed that 2% and 2.5% NaOH pretreated sample exposed more cellulose fibers compared with other treatments. The cellulose crystalline index was increased by the 1% to 2.0% NaOH treatments and slightly lowered by the 2.5% NaOH treatment due to destructing cellulose fibres. Two per cent NaOH pretreatment caused 69.9% lignin removal, whereas 2.5% NaOH pretreatment removed 72.4% lignin. Besides, reed straw, when pretreated at 2% and 2.5% NaOH, resulted 56.4% and 60.5% hemicellulose removal, respectively. However, the difference in removal of lignin and hemicellulose between 2% and 2.5% NaOH treated reed straw was very marginal. In addition, very negligible increase of cellulose level was estimated, amounting 78.8% and 76.6% in 2.5% and 2% NaOH-treated sample, respectively. Moreover, after 72 h, reducing sugar yield was 81.2% and 83.3% using enzyme loading of 15 FPU (g dry biomass)-' and 30 IU (g dry biomass)- and xylanase 4 FXU (g dry biomass)-1 from 2% and 2.5% NaOH pretreated reed straw, respectively. Reducing sugar yield was increased very marginally when NaOH concentration increased from 2% to 2.5% for reed straw pretreatment. Therefore, 2% NaOH is supposed to be effective for reed straw pretreatment at this mentioned condition.


Assuntos
Celulose/química , Celulose/ultraestrutura , Componentes Aéreos da Planta/química , Componentes Aéreos da Planta/ultraestrutura , Poaceae/química , Poaceae/ultraestrutura , Hidróxido de Sódio/química , Álcalis/química , Concentração de Íons de Hidrogênio , Teste de Materiais
SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA