Investigations into the synthesis of a nucleotide dimer via mechanochemical phosphoramidite chemistry.

Liquid-assisted mechanochemistry as a versatile approach for the coupling of a nucleoside phosphoramidite with a 5'-OH partially protected nucleoside has been investigated. Noted advantages over reported methods were a simplified reaction protocol, a drastic reduction in the use of toxic solvents, the facilitation of mechanochemical reactions through the improved mixing of solid reagents, and low hydrolytic product formation.

Non-Thermal Plasma Activation of Gold-Based Catalysts for Low-Temperature Water-Gas Shift Catalysis.

Non-thermal plasma activation has been used to enable low-temperature water-gas shift over a Au/CeZrO4 catalyst. The activity obtained was comparable with that attained by heating the catalyst to 180 °C providing an opportunity for the hydrogen production to be obtained under conditions where the thermodynamic limitations are minimal. Using in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), structural changes associated with the gold nanoparticles in the catalyst have been observed which are not found under thermal activation indicating a weakening of the Au-CO bond and a change in the mechanism of deactivation.

Using chiral ionic liquid additives to enhance asymmetric induction in a Diels-Alder reaction.

A bis-oxazoline ligand has been complexed using Cu(ii) and Zn(ii) trifluoromethanesulfonate and a range of chiral ionic liquid (CIL) additives based on natural products were used as a co-catalyst for a Diels-Alder reaction. The catalytic performance of these systems was compared for the asymmetric Diels-Alder reaction between N-acryloyloxazolidinone and cyclopentadiene with and without the presence of a CIL additive. In the absence of the CIL, both catalysts resulted in low enantioselectivities in conventional solvents and ionic liquids. However, whilst only a minor effect of the CIL was observed for the Cu based catalyst, in the case of the Zn based catalyst, significant enhancements in endo enantioselectivity of up to 50% were found on the addition of a CIL.

Influence of Fluorination on the Solubilities of Carbon Dioxide, Ethane, and Nitrogen in 1-n-Fluoro-alkyl-3-methylimidazolium Bis(n-fluoroalkylsulfonyl)amide Ionic Liquids.

The effect on gas solubilities of adding partially fluorinated alkyl side chains either on imidazolium-based cations or on bis(perfluoroalkylsulfonyl)amide anions was studied. The aim was to gain knowledge of the mechanisms of dissolution of gases in fluorinated ionic liquids and, if possible, to improve physical absorption of carbon dioxide in ionic liquids. We have determined experimentally, in the temperature range of 298-343 K and at pressures close to atmospheric pressure, the solubility and thermodynamics of solvation of carbon dioxide, ethane, and nitrogen in the ionic liquids 1-octyl-3-methylimidazolium bis[trifluoromethylsulfonyl]amide ([C8mim][NTf2]), 1-octyl-3-methylimidazolium bis[pentafluoroethylsulfonyl]amide ([C8mim][BETI]), 1-(3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluorooctyl)-3-methylimidazolium bis[trifluoromethylsulfonyl]amide ([C8H4F13mim][NTf2]), and 1-(3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluorooctyl)-3-methylimidazolium bis[pentafluoroethylsulfonyl]amide ([C8H4F13mim][BETI]). Ionic liquids with partial fluorination on the cation were found to exhibit higher carbon dioxide and nitrogen mole fraction solubilities but lower ethane solubilities, compared to those of their hydrogenated counterparts. Molecular simulation provided insights about the mechanisms of solvation of the different gases in the ionic liquids.

H2 production by the photocatalytic reforming of cellulose and raw biomass using Ni, Pd, Pt and Au on titania.

Here, we report a method for sustainable hydrogen production using sunlight and biomass. It is shown that cellulose can be photoreformed to produce hydrogen, even in solid form, by use of metal-loaded titania photocatalysts. The experiments performed verified that the process is enabled by initial hydrolysis via glucose, which itself is shown to be efficiently converted to produce hydrogen by photocatalysis. Importantly, it is shown that not only precious metals such as Pt, Pd and Au can be used as the metal component, but also much more economic and less environmentally damaging Ni is effective. Even more importantly, we show for the first time, to the best our knowledge, that fescue grass as raw biomass can be effective for hydrogen production without significant pre-treatment. This provides additional benefits for the efficiency of biomass hydrogen production, because fewer processing steps for the raw material are required than in the production of purer forms of cellulose, for example.

Development of a PtSn bimetallic catalyst for direct fuel cells using bio-butanol fuel.

Pt and PtSn catalysts were studied for n-butanol electro-oxidation at various temperatures. PtSn showed a higher activity towards butanol electro-oxidation compared to Pt in acidic media. The onset potential for n-butanol oxidation on PtSn is ∼520 mV lower than that found on Pt, and significantly lower activation energy was found for PtSn compared with that for Pt.

Determining adsorbate configuration on alumina surfaces with (13)C nuclear magnetic resonance relaxation time analysis.

Relative strengths of surface interaction for individual carbon atoms in acyclic and cyclic hydrocarbons adsorbed on alumina surfaces are determined using chemically resolved (13)C nuclear magnetic resonance (NMR) T1 relaxation times. The ratio of relaxation times for the adsorbed atoms T1,ads to the bulk liquid relaxation time T1,bulk provides an indication of the mobility of the atom. Hence a low T1,ads/T1,bulk ratio indicates a stronger surface interaction. The carbon atoms associated with unsaturated bonds in the molecules are seen to exhibit a larger reduction in T1 on adsorption relative to the aliphatic carbons, consistent with adsorption occurring through the carbon-carbon multiple bonds. The relaxation data are interpreted in terms of proximity of individual carbon atoms to the alumina surface and adsorption conformations are inferred. Furthermore, variations of interaction strength and molecular configuration have been explored as a function of adsorbate coverage, temperature, surface pre-treatment, and in the presence of co-adsorbates. This relaxation time analysis is appropriate for studying the behaviour of hydrocarbons adsorbed on a wide range of catalyst support and supported-metal catalyst surfaces, and offers the potential to explore such systems under realistic operating conditions when multiple chemical components are present at the surface.

Pressure effect on vibrational frequency and dephasing of 1-alkyl-3-methylimidazolium hexafluorophosphate ionic liquids.

Raman spectra in the range of the totally symmetric stretching mode of the [PF6](-) anion, νs(PF6), have been measured for 1-alkyl-3-methylimidazolium ionic liquids [CnC1im][PF6], for n = 4, 6, and 8, as a function of pressure at room temperature. The ionic liquids [C6C1im][PF6] and [C8C1im][PF6] remain in an amorphous phase up to 3.5 GPa, in contrast to [C4C1im][PF6], which crystallizes above ~0.5 GPa. Equations of state based either on a group contribution model or Carnahan-Starling-van der Waals model have been used to estimate the densities of the ionic liquids at high pressures. The shifts of the vibrational frequency of νs(PF6) with density observed in [C6C1im][PF6] and in [C8C1im][PF6] have been calculated by a hard-sphere model of a pseudo-diatomic solute under short-range repulsive interactions with the neighboring particles. The stochastic model of Kubo for vibrational dephasing has been used to obtain the amplitude of vibrational frequency fluctuation, <Δω(2)>, and the relaxation time of frequency fluctuation, τc, as a function of density by Raman band shape analysis of the νs(PF6) mode of [C6C1im][PF6] and [C8C1im][PF6].

TAP studies of ammonia decomposition over Ru and Ir catalysts.

The Temporal Analysis of Products (TAP) technique has been used to investigate the mechanism involved in the catalytic decomposition of NH(3) over a series of catalysts consisting of activated carbon supported Ru (promoted and non-promoted with Na) and over an activated carbon supported Ir. An extensive study of the role played by both the support and the promoter in the "side reactions" and in the stability and surface lifetime of the NH(x) species has been performed. It was suggested that the N(2) produced during the first steps of the reaction over the activated carbon supported Ru catalysts promoted with Na forms a Na-N-Ru complex at the promoter-transition metal crystallite interface. This study also suggests that the Na promoter prevents the diffusion of hydrogen from the metal to the support via spill-over. A similar effect was observed after the thermal treatment at high temperature of the carbon catalyst support. Finally large differences in multi-pulse TAP results have been detected between Ru and Ir catalysts implying that the NH(3) decomposition reaction mechanism must be different on both metals.

Small volume laboratory on a chip measurements incorporating the quartz crystal microbalance to measure the viscosity-density product of room temperature ionic liquids.

A microfluidic glass chip system incorporating a quartz crystal microbalance (QCM) to measure the square root of the viscosity-density product of room temperature ionic liquids (RTILs) is presented. The QCM covers a central recess on a glass chip, with a seal formed by tightly clamping from above outside the sensing region. The change in resonant frequency of the QCM allows for the determination of the square root viscosity-density product of RTILs to a limit of approximately 10 kg m(-2) s(-0.5). This method has reduced the sample size needed for characterization from 1.5 ml to only 30 mul and allows the measurement to be made in an enclosed system.

Structure and dynamics of 1-ethyl-3-methylimidazolium acetate via molecular dynamics and neutron diffraction.

The liquid state structure of the ionic liquid, 1-ethyl-3-methylimidazolium acetate ([C(2)mim][OAc]), an excellent nonderivitizing solvent for cellulosic biomass, has been investigated at 323 K by molecular dynamics (MD) simulation and by neutron diffraction using the SANDALS diffractometer at ISIS to provide experimental differential neutron scattering cross sections from H/D isotopically substituted materials. Ion-ion radial distribution functions both calculated from MD and derived from the empirical potential structure refinement (EPSR) model to the experimental data show the alternating shell structure of anions around the cation, as anticipated. Spatial probability distributions reveal the main anion-to-cation features as in-plane interactions of anions with the three imidazolium ring hydrogens and cation-cation planar stacking above/below the imidazolium rings. Interestingly, the presence of the polarized hydrogen-bond acceptor (HBA) anion (acetate) leads to an increase in anion-anion tail-tail structuring within each anion shell, an indicator of the onset of hydrophobic regions within the anion regions of the liquid. MD simulations show the importance of scaling of the effective ionic charges in the basic simulation approach to accurately reproduce both the observed experimental neutron scattering cross sections and ion self-diffusion coefficients.

Evaluation of a microfluidic device for the electrochemical determination of halide content in ionic liquids.

A microfluidic device designed for electrochemical studies on a microliter scale has been utilized for the examination of impurity levels in ionic liquids (ILs). Halide impurities are common following IL synthesis, and this study demonstrates the ability to quantify low concentrations of halide in a range of ILs to levels of approximately 5 ppm, even in ILs not currently measurable using other methods such as ion chromatography. To validate the mixer device, the electrochemistry of ferrocene was also examined and compared with spectroscopic and bulk electrochemistry measurements. An automated "sample preparation, delivery, and calibration" method was developed, and the chip successfully used for linear sweep, cyclic voltammetry (under both quiescent and steady-state flowing conditions), square wave voltammetry, and differential pulse voltammetry. An effective method of electrochemically cleaning the electrodes is also presented.

Ion association in [bmim][PF6]/naphthalene mixtures: an experimental and computational study.

Mixtures of room temperature ionic liquids (IL) with neutral organic molecules provide a valuable testing ground to investigate the interplay of the ionic and molecular-dipolar state in dense Coulomb systems at near ambient conditions. In the present study, the viscosity eta and the ionic conductivity sigma of 1-n-butyl-3-methylimidazolium hexafluorophosphate ([bmim][PF6])/naphthalene mixtures at T = 80 degrees C have been measured at 10 stoichiometries spanning the composition range from pure naphthalene to pure [bmim][PF6]. The viscosity grows nearly monotonically with increasing IL mole fraction ( x), whereas the conductivity per ion displays a clear peak at x approximately 15%. The origin of this maximum has been investigated using molecular dynamics simulations based on a classical force field. Snapshots of the simulated samples show that the conductivity maximum is due to the gradual transition in the IL component from an ionic state at high x to a dipolar fluid made of neutral ion pairs at low x. At concentrations x < 0.20 the ion pairs condense into molecular-thin filaments bound by dipolar forces and extending in between nanometric droplets of IL. These results are confirmed and complemented by the computation of dynamic and transport properties in [bmim][PF6]/naphthalene mixtures at low IL concentration.

The energetics of tetrahydrocarbazole aromatization over Pd(111): a computational analysis.

The carbazole moiety is a component of many important pharmaceuticals including anticancer and anti-HIV agents and is commonly utilized in the production of modern polymeric materials with novel photophysical and electronic properties. Simple carbazoles are generally produced via the aromatization of the respective tetrahydrocarbazole (THCZ). In this work, density functional theory calculations are used to model the reaction pathway of tetrahydrocarbazole aromatization over Pd(111). The geometry of each of the intermediate surface species has been determined and how each structure interacts with the metal surface addressed. The reaction energies and barriers of each of the elementary surface reactions have also been calculated, and a detailed analysis of the energetic trends performed. Our calculations have shown that the surface intermediates remain fixed to the surface via the aromatic ring in a manner similar to that of THCZ. Moreover, the aliphatic ring becomes progressively more planer with the dissociation of each subsequent hydrogen atom. Analysis of the reaction energy profile has revealed that the trend in reaction barriers is determined by the two factors: (i) the strength of the dissociating ring-H bond and (ii) the subsequent gain in energy due to the geometric relaxation of the aliphatic ring.

Glucose solvation by the ionic liquid 1,3-dimethylimidazolium chloride: a simulation study.

Simulations of beta-glucose in the ionic liquid 1,3-dimethylimidazolium chloride have been performed in order to examine the solvation environment of the carbohydrate. Both single molecule and 1:5 glucose:ionic liquid (16.7 wt %) solutions are studied, and the hydrogen bonding between sugar and solvent is examined. The primary solvation shell around the perimeter of the glucose ring consists predominantly of chloride anions which hydrogen bond to the hydroxyl groups. A small presence of the cation is also found, with the association occurring through the weakly acidic hydrogen at the 2-position of the imidazolium ring interacting with the oxygen atoms of the sugar secondary hydroxyls. An average chloride coordination number of 4 is found around the glucose for both the single molecule and high concentration simulations, despite the reduced chloride:glucose ratio in the latter case. In relation to the cation, the glucose molecules occupy positions above and below the plane of the imidazolium ring. Importantly, even at high glucose concentrations, no significant change in the anion-cation interactions and overall liquid structure of the ionic liquid is found, indicating that the glucose is readily accommodated by the solvent at this concentration. Dominant contributions to the sugar-ionic liquid interaction energy come from favorable hydrogen bonding (electrostatic) interactions between hydroxyls and chlorides, although a small favorable van der Waals energy contribution is also seen between the sugar and cations suggesting that the cation could be tailored in order to further improve the dissolution of glucose/cellulose in ionic liquid systems.

DFT and in situ EXAFS investigation of gold/ceria-zirconia low-temperature water gas shift catalysts: identification of the nature of the active form of gold.

A combined experimental and theoretical investigation of the nature of the active form of gold in oxide-supported gold catalysts for the water gas shift reaction has been performed. In situ extended X-ray absorption fine structure (EXAFS) and X-ray absorption near-edge structure (XANES) experiments have shown that in the fresh catalysts the gold is in the form of highly dispersed gold ions. However, under water gas shift reaction conditions, even at temperatures as low as 100 degrees C, the evidence from EXAFS and XANES is only consistent with rapid, and essentially complete, reduction of the gold to form metallic clusters containing about 50 atoms. The presence of Au-Ce distances in the EXAFS spectra, and the fact that about 15% of the gold atoms can be reoxidized after exposure to air at 150 degrees C, is indicative of a close interaction between a fraction (ca. 15%) of the gold atoms and the oxide support. Density functional theory (DFT) calculations are entirely consistent with this model and suggest that an important aspect of the active and stable form of gold under water gas shift reaction conditions is the location of a partially oxidized gold (Audelta+) species at a cerium cation vacancy in the surface of the oxide support. It is found that even with a low loading gold catalysts (0.2%) the fraction of ionic gold under water gas shift conditions is below the limit of detection by XANES (<5%). It is concluded that under water gas shift reaction conditions the active form of gold comprises small metallic gold clusters in intimate contact with the oxide support.

Gas-phase photocatalytic oxidation of dichlorobutenes.

Gas-phase photocatalysis of 1,4-dichlorobut-2-enes and 3,4-dichlorobut-1-ene (DCB) has been studied using TiO2 and 3% WO3/TiO2 supported on SiO2. DCB was found to oxidize efficiently over these catalysts; however, only low rates of CO2 formation were observed. With these chlorinated hydrocarbons, the catalysts were found to deactivate over time, probably via the formation of aldol condensation products of chloracetaldehyde, which is the predominant intermediate observed. The variation in rate and selectivity of the oxidation reactions with O2 concentration is reported and a mechanism is proposed. Using isotope ratio mass spectrometry, the initial step for the DCB removal has been shown not to be a carbon bond cleavage but is likely to be hydroxyl radical addition to the carbon-carbon double bond.