Tunable 2D Conjugated Porous Organic Polymer Films for Precise Molecular Nanofiltration and Optoelectronics.

Structural design of 2D conjugated porous organic polymer films (2D CPOPs), by tuning linkage chemistries and pore sizes, provides great adaptability for various applications, including membrane separation. Here, four free-standing 2D CPOP films of imine- or hydrazone-linked polymers (ILP/HLP) in combination with benzene (B-ILP/HLP) and triphenylbenzene (TPB-ILP/HLP) aromatic cores are synthesized. The anisotropic disordered films, composed of polymeric layered structures, can be exfoliated into ultrathin 2D-nanosheets with layer-dependent electrical properties. The bulk CPOP films exhibit structure-dependent optical properties, triboelectric nanogenerator output, and robust mechanical properties, rivaling previously reported 2D polymers and porous materials. The exfoliation energies of the 2D CPOPs and their mechanical behavior at the molecular level are investigated using density function theory (DFT) and molecular dynamics (MD) simulations, respectively. Exploiting the structural tunability, the comparative organic solvent nanofiltration (OSN) performance of six membranes having different pore sizes and linkages to yield valuable trends in molecular weight selectivity is investigated. Interestingly, the OSN performances follow the predicted transport modeling values based on theoretical pore size calculations, signifying the existence of permanent porosity in these materials. The membranes exhibit excellent stability in organic solvents at high pressures devoid of any structural deformations, revealing their potential in practical OSN applications.

Design of Mixed-Matrix MOF Membranes with Asymmetric Filler Density and Intrinsic MOF/Polymer Compatibility for Enhanced Molecular Sieving.

The separation of high-value-added chemicals from organic solvents is important for many industries. Membrane-based nanofiltration offers a more energy-efficient separation than the conventional thermal processes. Conceivably, mixed-matrix membranes (MMMs), encompassing metal-organic frameworks (MOFs) as fillers, are poised to promote selective separation via molecular sieving, synergistically combining polymers flexibility and fine-tuned porosity of MOFs. Nevertheless, conventional direct mixing of MOFs with polymer solutions results in underutilization of the MOF fillers owing to their uniform cross-sectional distribution. Therefore, in this work, a multizoning technique is proposed to produce MMMs with an asymmetric-filler density, in which the MOF fillers are distributed only on the surface of the membrane, and a seamless interface at the nanoscale. The design strategy demonstrates five times higher MOF surface coverage, which results in a solvent permeance five times higher than that of conventional MMMs while maintaining high selectivity. Practically, MOFs are paired with polymers of similar chemical nature to enhance their adhesion without the need for surface modification. The approach offers permanently accessible MOF porosity, which translates to effective molecular sieving, as exemplified by the polybenzimidazole and Zr-BI-fcu-MOF system. The findings pave the way for the development of composite materials with a seamless interface.

Emergent Collective Motion of Self-Propelled Condensate Droplets.

Recently, there is much interest in droplet condensation on soft or liquid or liquidlike substrates. Droplets can deform soft and liquid interfaces resulting in a wealth of phenomena not observed on hard, solid surfaces (e.g., increased nucleation, interdroplet attraction). Here, we describe a unique collective motion of condensate water droplets that emerges spontaneously when a solid substrate is covered with a thin oil film. Droplets move first in a serpentine, self-avoiding fashion before transitioning to circular motions. We show that this self-propulsion (with speeds in the 0.1-1 mm s^{-1} range) is fueled by the interfacial energy release upon merging with newly condensed but much smaller droplets. The resultant collective motion spans multiple length scales from submillimeter to several centimeters, with potentially important heat-transfer and water-harvesting applications.

Biobased Interpenetrating Polymer Network Membranes for Sustainable Molecular Sieving.

There is an urgent need for sustainable alternatives to fossil-based polymer materials. Through nanodomain engineering, we developed, without using toxic cross-linking agents, interpenetrating biopolymer network membranes from natural compounds that have opposing polarity in water. Agarose and natural rubber latex were consecutively self-assembled and self-cross-linked to form patchlike nanodomains. Both nano-Fourier transform infrared (nano-FTIR) spectroscopy and computational methods revealed the biopolymers' molecular-level entanglement. The membranes exhibited excellent solvent resistance and offered tunable molecular sieving. We demonstrated control over separation performance in the range of 227-623 g mol-1 via two methodologies: adjusting the molecular composition of the membranes and activating them in water. A carcinogenic impurity at a concentration of 5 ppm, which corresponds to the threshold of toxicological concern, was successfully purged at a negligible 0.56% pharmaceutical loss. The biodegradable nature of the membranes enables an environmentally friendly end-of-life phase; therefore, the membranes have a sustainable lifecycle from cradle to grave.

Multistep Transformation from Amorphous and Nonporous Fullerenols to Highly Crystalline Microporous Materials.

The structural and morphological properties of fullerenols upon exposure to heat treatment have yet to be understood. Herein, the temperature-driven structural and morphological evolutions of fullerenols C60 (OH) and C70 (OH) were investigated. In situ spectroscopic techniques, such as variable-temperature X-ray diffraction and coupled thermogravimetric Fourier-transform infrared analysis, were used to elucidate the structural transformation mechanism of fullerenols. Both fullerenols underwent four-step structural transformation upon heating and cooling, including amorphous-to-crystalline transition, thermal expansion, structural compression, and new crystal formation. Compared to the initially nonporous amorphous fullerenol, the crystalline product exhibited microporosity with a surface area of 114 m2 g-1 and demonstrated CO2 sorption capability. These findings show the potential of fullerene derivatives as adsorbents.

Nanofibrous membranes comprising intrinsically microporous polyimides with embedded metal-organic frameworks for capturing volatile organic compounds.

Here, we report the fabrication of nanofibrous air-filtration membranes of intrinsically microporous polyimide with metal-organic frameworks (MOFs). The membranes successfully captured VOCs from air. Two polyimides with surface areas up to 500 m2 g-1 were synthesized, and the impact of the porosity on the sorption kinetics and capacity of the nanofibers were investigated. Two Zr-based MOFs, namely pristine UiO-66 (1071 m2 g-1) and defective UiO-66 (1582 m2 g-1), were embedded into the nanofibers to produce nanocomposite materials. The nanofibers could remove polar formaldehyde and non-polar toluene, xylene, and mesitylene from air. The highest sorption capacity with 214 mg g-1 was observed for xylene, followed by mesitylene (201 mg g-1), toluene (142 mg g-1), and formaldehyde (124 mg g-1). The incorporation of MOFs drastically improved the sorption performance of the fibers produced from low-surface-area polyimide. Time-dependent sorption tests revealed the rapid sequestration of air pollutants owing to the intrinsic porosity of the polyimides and the MOF fillers. The porosity allowed the rapid diffusion of pollutants into the inner fiber matrix. The molecular level interactions between VOCs and polymer/MOFs were clarified by molecular modeling studies. The practicality of material fabrication and the applicability of the material were assessed through the modification of industrial N95 dust masks. To the best of our knowledge, this is the first successful demonstration of the synergistic combination of intrinsically microporous polyimides and MOFs in the form of electrospun nanofibrous membranes and their application for VOC removal.

Understanding the Effects of Binders in Gas Sorption and Acidity of Aluminium Fumarate Extrudates.

Understanding the impact of shaping processes on solid adsorbents is critical for the implementation of MOFs in industrial separation processes or as catalytic materials. Production of MOF-containing shaped particles is typically associated with loss of porosity and modification of acid sites, two phenomena that affect their performance. Herein, we report a detailed study on how extrusion affects the crystallinity, porosity, and acidity of the aluminium fumarate MOF with clays or SiO2 gel binders. Thorough characterization showed that the clay binders confer the extrudates a good mechanical robustness at the expense of porosity, while silica gel shows an opposite trend. The CO2 selectivity towards CH4 , of interest for natural gas separation processes, is maintained upon the extrusion process. Moreover, probe FTIR spectroscopy revealed no major changes in the types of acid sites. This study highlights that these abundant and inexpensive clay materials may be used for scaling MOFs as active adsorbents.

Tuning the Properties of MOF-808 via Defect Engineering and Metal Nanoparticle Encapsulation.

Defect engineering and metal encapsulation are considered as valuable approaches to fine-tune the reactivity of metal-organic frameworks. In this work, various MOF-808 (Zr) samples are synthesized and characterized with the final aim to understand how defects and/or platinum nanoparticle encapsulation act on the intrinsic and reactive properties of these MOFs. The reactivity of the pristine, defective and Pt encapsulated MOF-808 is quantified with water adsorption and CO2 adsorption calorimetry. The results reveal strong competitive effects between crystal morphology and missing linker defects which in turn affect the crystal morphology, porosity, stability, and reactivity. In spite of leading to a loss in porosity, the introduction of defects (missing linkers or Pt nanoparticles) is beneficial to the stability of the MOF-808 towards water and could also be advantageously used to tune adsorption properties of this MOF family.

Selective Electrocatalytic Oxidation of Biomass-Derived 5-Hydroxymethylfurfural to 2,5-Diformylfuran: from Mechanistic Investigations to Catalyst Recovery.

Invited for this month's cover is the group of Gyorgy Szekely at King Abdullah University of Science and Technology (KAUST). The image shows the efficient TEMPO-based electrocatalytic transformation of biomass-based C6 -platform chemical HMF to DFF using non-precious-metal-based electrodes in green solvents with nanofiltration-enabled catalyst recovery. The Full Paper itself is available at 10.1002/cssc.202000453.

Selective Electrocatalytic Oxidation of Biomass-Derived 5-Hydroxymethylfurfural to 2,5-Diformylfuran: from Mechanistic Investigations to Catalyst Recovery.

The catalytic transformation of bio-derived compounds, specifically 5-hydroxymethylfurfural (HMF), into value-added chemicals may provide sustainable alternatives to crude oil and natural gas-based products. HMF can be obtained from fructose and successfully converted to 2,5-diformylfuran (DFF) by an environmentally friendly organic electrosynthesis performed in an ElectraSyn reactor, using cost-effective and sustainable graphite (anode) and stainless-steel (cathode) electrodes in an undivided cell, eliminating the need for conventional precious metal electrodes. In this work, the electrocatalysis of HMF is performed by using green solvents such as acetonitrile, γ-valerolactone, as well as PolarClean, which is used in electrocatalysis for the first time. The reaction parameters and the synergistic effects of the TEMPO catalyst and 2,6-lutidine base are explored both experimentally and through computation modeling. The molecular design and synthesis of a size-enlarged C3 -symmetric tris-TEMPO catalyst are also performed to facilitate a sustainable reaction work-up through nanofiltration. The obtained performance is then compared with those obtained by heterogeneous TEMPO alternatives recovered by using an external magnetic field and microfiltration. Results show that this new method of electrocatalytic oxidation of HMF to DFF can be achieved with excellent selectivity, good yield, and excellent catalyst recovery.

Metal-Organic Frameworks as Catalyst Supports: Influence of Lattice Disorder on Metal Nanoparticle Formation.

Because of their high tunability and surface area, metal-organic frameworks (MOFs) show great promise as supports for metal nanoparticles. Depending on the synthesis route, MOFs may contain defects. Here, we show that highly crystalline MIL-100(Fe) and disordered Basolite® F300, with identical iron 1,3,5-benzenetricarboxylate composition, exhibit very divergent properties when used as a support for Pd nanoparticle deposition. While MIL-100(Fe) shows a regular MTN-zeotype crystal structure with two types of cages, Basolite® F300 lacks long-range order beyond 8 Šand has a single-pore system. The medium-range configurational linker-node disorder in Basolite® F300 results in a reduced number of Lewis acid sites, yielding more hydrophobic surface properties compared to hydrophilic MIL-100(Fe). The hydrophilic/hydrophobic nature of MIL-100(Fe) and Basolite® F300 impacts the amount of Pd and particle size distribution of Pd nanoparticles deposited during colloidal synthesis and dry impregnation methods, respectively. It is suggested that polar (apolar) solvents/precursors attractively interact with hydrophilic (hydrophobic) MOF surfaces, allowing tools at hand to increase the level of control over, for example, the nanoparticle size distribution.