Downscaling Industrial-Scale Syngas Fermentation to Simulate Frequent and Irregular Dissolved Gas Concentration Shocks.

In large-scale syngas fermentation, strong gradients in dissolved gas (CO, H2) concentrations are very likely to occur due to locally varying mass transfer and convection rates. Using Euler-Lagrangian CFD simulations, we analyzed these gradients in an industrial-scale external-loop gas-lift reactor (EL-GLR) for a wide range of biomass concentrations, considering CO inhibition for both CO and H2 uptake. Lifeline analyses showed that micro-organisms are likely to experience frequent (5 to 30 s) oscillations in dissolved gas concentrations with one order of magnitude. From the lifeline analyses, we developed a conceptual scale-down simulator (stirred-tank reactor with varying stirrer speed) to replicate industrial-scale environmental fluctuations at bench scale. The configuration of the scale-down simulator can be adjusted to match a broad range of environmental fluctuations. Our results suggest a preference for industrial operation at high biomass concentrations, as this would strongly reduce inhibitory effects, provide operational flexibility and enhance the product yield. The peaks in dissolved gas concentration were hypothesized to increase the syngas-to-ethanol yield due to the fast uptake mechanisms in C. autoethanogenum. The proposed scale-down simulator can be used to validate such results and to obtain data for parametrizing lumped kinetic metabolic models that describe such short-term responses.

An analysis of organism lifelines in an industrial bioreactor using Lattice-Boltzmann CFD.

Euler-Lagrange CFD simulations, where the biotic phase is represented by computational particles (parcels), provide information on environmental gradients inside bioreactors from the microbial perspective. Such information is highly relevant for reactor scale-down and process optimization. One of the major challenges is the computational intensity of CFD simulations, especially when resolution of dynamics in the flowfield is required. Lattice-Boltzmann large-eddy simulations (LB-LES) form a very promising approach for simulating accurate, dynamic flowfields in stirred reactors, at strongly reduced computation times compared to finite volume approaches. In this work, the performance of LB-LES in resolving substrate gradients in large-scale bioreactors is explored, combined with the inclusion of a Lagrangian biotic phase to provide the microbial perspective. In addition, the hydrodynamic performance of the simulations is confirmed by verification of hydrodynamic characteristics (radial velocity, turbulent kinetic energy, energy dissipation) in the impeller discharge stream of a 29 cm diameter stirred tank. The results are compared with prior finite volume simulation results, both in terms of hydrodynamic and biokinetic observations, and time requirements.

Microbial lifelines in bioprocesses: From concept to application.

Bioprocesses are scaled up for the production of large product quantities. With larger fermenter volumes, mixing becomes increasingly inefficient and environmental gradients get more prominent than in smaller scales. Environmental gradients have an impact on the microorganism's metabolism, which makes the prediction of large-scale performance difficult and can lead to scale-up failure. A promising approach for improved understanding and estimation of dynamics of microbial populations in large-scale bioprocesses is the analysis of microbial lifelines. The lifeline of a microbe in a bioprocess is the experience of environmental gradients from a cell's perspective, which can be described as a time series of position, environment and intracellular condition. Currently, lifelines are predominantly determined using models with computational fluid dynamics, but new technical developments in flow-following sensor particles and microfluidic single-cell cultivation open the door to a more interdisciplinary concept. We critically review the current concepts and challenges in lifeline determination and application of lifeline analysis, as well as strategies for the integration of these techniques into bioprocess development. Lifelines can contribute to a successful scale-up by guiding scale-down experiments and identifying strain engineering targets or bioreactor optimisations.

Stochastic parcel tracking in an Euler-Lagrange compartment model for fast simulation of fermentation processes.

The compartment model (CM) is a well-known approach for computationally affordable, spatially resolved hydrodynamic modeling of unit operations. Recent implementations use flow profiles based on Computational Fluid Dynamics (CFD) simulations, and several authors included microbial kinetics to simulate gradients in bioreactors. However, these studies relied on black-box kinetics that do not account for intracellular changes and cell population dynamics in response to heterogeneous environments. In this paper, we report the implementation of a Lagrangian reaction model, where the microbial phase is tracked as a set of biomass-parcels, each linked with an intracellular composition vector and a structured reaction model describing their intracellular response to extracellular variations. A stochastic parcel tracking approach is adopted, in contrast to the resolved trajectories used in CFD implementations. A penicillin production process is used as a case study. We show good performance of the model compared with full CFD simulations, both regarding the extracellular gradients and intracellular pool response, using the mixing time as a matching criterion and taking into account that the mixing time is sensitive to the number of compartments. The sensitivity of the model output towards some of the inputs is explored. The coarsest representative CM requires a few minutes to solve 80 h of flow time, compared with approximately 2 weeks for a full Euler-Lagrange CFD simulation of the same case. This alleviates one of the major bottlenecks for the application of such CFD simulations towards the analysis and optimization of industrial fermentation processes.

Developing a Computational Framework To Advance Bioprocess Scale-Up.

Bioprocess scale-up is a critical step in process development. However, loss of production performance upon scaling-up, including reduced titer, yield, or productivity, has often been observed, hindering the commercialization of biotech innovations. Recent developments in scale-down studies assisted by computational fluid dynamics (CFD) and powerful stimulus-response metabolic models afford better process prediction and evaluation, enabling faster scale-up with minimal losses. In the future, an ideal bioprocess design would be guided by an in silico model that integrates cellular physiology (spatiotemporal multiscale cellular models) and fluid dynamics (CFD models). Nonetheless, there are challenges associated with both establishing predictive metabolic models and CFD coupling. By highlighting these and providing possible solutions here, we aim to advance the development of a computational framework to accelerate bioprocess scale-up.

Coupled metabolic-hydrodynamic modeling enabling rational scale-up of industrial bioprocesses.

Metabolomics aims to address what and how regulatory mechanisms are coordinated to achieve flux optimality, different metabolic objectives as well as appropriate adaptations to dynamic nutrient availability. Recent decades have witnessed that the integration of metabolomics and fluxomics within the goal of synthetic biology has arrived at generating the desired bioproducts with improved bioconversion efficiency. Absolute metabolite quantification by isotope dilution mass spectrometry represents a functional readout of cellular biochemistry and contributes to the establishment of metabolic (structured) models required in systems metabolic engineering. In industrial practices, population heterogeneity arising from fluctuating nutrient availability frequently leads to performance losses, that is reduced commercial metrics (titer, rate, and yield). Hence, the development of more stable producers and more predictable bioprocesses can benefit from a quantitative understanding of spatial and temporal cell-to-cell heterogeneity within industrial bioprocesses. Quantitative metabolomics analysis and metabolic modeling applied in computational fluid dynamics (CFD)-assisted scale-down simulators that mimic industrial heterogeneity such as fluctuations in nutrients, dissolved gases, and other stresses can procure informative clues for coping with issues during bioprocessing scale-up. In previous studies, only limited insights into the hydrodynamic conditions inside the industrial-scale bioreactor have been obtained, which makes case-by-case scale-up far from straightforward. Tracking the flow paths of cells circulating in large-scale bioreactors is a highly valuable tool for evaluating cellular performance in production tanks. The "lifelines" or "trajectories" of cells in industrial-scale bioreactors can be captured using Euler-Lagrange CFD simulation. This novel methodology can be further coupled with metabolic (structured) models to provide not only a statistical analysis of cell lifelines triggered by the environmental fluctuations but also a global assessment of the metabolic response to heterogeneity inside an industrial bioreactor. For the future, the industrial design should be dependent on the computational framework, and this integration work will allow bioprocess scale-up to the industrial scale with an end in mind.

Comparative performance of different scale-down simulators of substrate gradients in Penicillium chrysogenum cultures: the need of a biological systems response analysis.

In a 54 m3 large-scale penicillin fermentor, the cells experience substrate gradient cycles at the timescales of global mixing time about 20-40 s. Here, we used an intermittent feeding regime (IFR) and a two-compartment reactor (TCR) to mimic these substrate gradients at laboratory-scale continuous cultures. The IFR was applied to simulate substrate dynamics experienced by the cells at full scale at timescales of tens of seconds to minutes (30 s, 3 min and 6 min), while the TCR was designed to simulate substrate gradients at an applied mean residence time (τc) of 6 min. A biological systems analysis of the response of an industrial high-yielding P. chrysogenum strain has been performed in these continuous cultures. Compared to an undisturbed continuous feeding regime in a single reactor, the penicillin productivity (qPenG ) was reduced in all scale-down simulators. The dynamic metabolomics data indicated that in the IFRs, the cells accumulated high levels of the central metabolites during the feast phase to actively cope with external substrate deprivation during the famine phase. In contrast, in the TCR system, the storage pool (e.g. mannitol and arabitol) constituted a large contribution of carbon supply in the non-feed compartment. Further, transcript analysis revealed that all scale-down simulators gave different expression levels of the glucose/hexose transporter genes and the penicillin gene clusters. The results showed that qPenG did not correlate well with exposure to the substrate regimes (excess, limitation and starvation), but there was a clear inverse relation between qPenG and the intracellular glucose level.

Power input effects on degeneration in prolonged penicillin chemostat cultures: A systems analysis at flux, residual glucose, metabolite, and transcript levels.

In the present work, by performing chemostat experiments at 400 and 600 RPM, two typical power inputs representative of industrial penicillin fermentation (P/V, 1.00 kW/m3 in more remote zones and 3.83 kW/m3 in the vicinity of the impellers, respectively) were scaled-down to bench-scale bioreactors. It was found that at 400 RPM applied in prolonged glucose-limited chemostat cultures, the previously reported degeneration of penicillin production using an industrial Penicillium chrysogenum strain was virtually absent. To investigate this, the cellular response was studied at flux (stoichiometry), residual glucose, intracellular metabolite and transcript levels. At 600 RPM, 20% more cell lysis was observed and the increased degeneration of penicillin production was accompanied by a 22% larger ATP gap and an unexpected 20-fold decrease in the residual glucose concentration (Cs,out ). At the same time, the biomass specific glucose consumption rate (qs ) did not change but the intracellular glucose concentration was about sixfold higher, which indicates a change to a higher affinity glucose transporter at 600 RPM. In addition, power input differences cause differences in the diffusion rates of glucose and the calculated Batchelor diffusion length scale suggests the presence of a glucose diffusion layer at the glucose transporting parts of the hyphae, which was further substantiated by a simple proposed glucose diffusion-uptake model. By analysis of calculated mass action ratios (MARs) and energy consumption, it indicated that at 600 RPM glucose sensing and signal transduction in response to the low Cs,out appear to trigger a gluconeogenic type of metabolic flux rearrangement, a futile cycle through the pentose phosphate pathway (PPP) and a declining redox state of the cytosol. In support of the change in glucose transport and degeneration of penicillin production at 600 RPM, the transcript levels of the putative high-affinity glucose/hexose transporter genes Pc12g02880 and Pc06g01340 increased 3.5- and 3.3-fold, respectively, and those of the pcbC gene encoding isopenicillin N-synthetase (IPNS) were more than twofold lower in the time range of 100-200 hr of the chemostat cultures. Summarizing, changes at power input have unexpected effects on degeneration and glucose transport, and result in significant metabolic rearrangements. These findings are relevant for the industrial production of penicillin, and other fermentations with filamentous microorganisms.

A 9-pool metabolic structured kinetic model describing days to seconds dynamics of growth and product formation by Penicillium chrysogenum.

A powerful approach for the optimization of industrial bioprocesses is to perform detailed simulations integrating large-scale computational fluid dynamics (CFD) and cellular reaction dynamics (CRD). However, complex metabolic kinetic models containing a large number of equations pose formidable challenges in CFD-CRD coupling and computation time afterward. This necessitates to formulate a relatively simple but yet representative model structure. Such a kinetic model should be able to reproduce metabolic responses for short-term (mixing time scale of tens of seconds) and long-term (fed-batch cultivation of hours/days) dynamics in industrial bioprocesses. In this paper, we used Penicillium chrysogenum as a model system and developed a metabolically structured kinetic model for growth and production. By lumping the most important intracellular metabolites in 5 pools and 4 intracellular enzyme pools, linked by 10 reactions, we succeeded in maintaining the model structure relatively simple, while providing informative insight into the state of the organism. The performance of this 9-pool model was validated with a periodic glucose feast-famine cycle experiment at the minute time scale. Comparison of this model and a reported black box model for this strain shows the necessity of employing a structured model under feast-famine conditions. This proposed model provides deeper insight into the in vivo kinetics and, most importantly, can be straightforwardly integrated into a computational fluid dynamic framework for simulating complete fermentation performance and cell population dynamics in large scale and small scale fermentors. Biotechnol. Bioeng. 2017;114: 1733-1743. © 2017 Wiley Periodicals, Inc.

Euler-Lagrange computational fluid dynamics for (bio)reactor scale down: An analysis of organism lifelines.

The trajectories, referred to as lifelines, of individual microorganisms in an industrial scale fermentor under substrate limiting conditions were studied using an Euler-Lagrange computational fluid dynamics approach. The metabolic response to substrate concentration variations along these lifelines provides deep insight in the dynamic environment inside a large-scale fermentor, from the point of view of the microorganisms themselves. We present a novel methodology to evaluate this metabolic response, based on transitions between metabolic "regimes" that can provide a comprehensive statistical insight in the environmental fluctuations experienced by microorganisms inside an industrial bioreactor. These statistics provide the groundwork for the design of representative scale-down simulators, mimicking substrate variations experimentally. To focus on the methodology we use an industrial fermentation of Penicillium chrysogenum in a simplified representation, dealing with only glucose gradients, single-phase hydrodynamics, and assuming no limitation in oxygen supply, but reasonably capturing the relevant timescales. Nevertheless, the methodology provides useful insight in the relation between flow and component fluctuation timescales that are expected to hold in physically more thorough simulations. Microorganisms experience substrate fluctuations at timescales of seconds, in the order of magnitude of the global circulation time. Such rapid fluctuations should be replicated in truly industrially representative scale-down simulators.