Block Copolymers of Polyolefins with Polyacrylates: Analyzing and Improving the Blocking Efficiencies Using MILRad/ATRP Approach.

Despite their industrial ubiquity, polyolefin-polyacrylate block copolymers are challenging to synthesize due to the distinct polymerization pathways necessary for respective blocks. This study utilizes MILRad, metal-organic insertion light-initiated radical polymerization, to synthesize polyolefin-b-poly(methyl acrylate) copolymer by combining palladium-catalyzed insertion-coordination polymerization and atom transfer radical polymerization (ATRP). Brookhart-type Pd complexes used for the living polymerization of olefins are homolytically cleaved by blue-light irradiation, generating polyolefin-based macroradicals, which are trapped with functional nitroxide derivatives forming ATRP macroinitiators. ATRP in the presence of Cu(0), that is, supplemental activators and reducing agents , is used to polymerize methyl acrylate. An increase in the functionalization efficiency of up to 71% is demonstrated in this study by modifying the light source and optimizing the radical trapping condition. Regardless of the radical trapping efficiency, essentially quantitative chain extension of polyolefin-Br macroinitiator with acrylates is consistently demonstrated, indicating successful second block formation.

Deciphering the Olefin Isomerization-Polymerization Paradox of Palladium(II) Diimine Catalysts: Discovery of Simultaneous and Independent Pathways of Olefin Isomerization and Living Polymerization.

This work elucidates a long-standing unexplained paradox commonly observed within the polymerization of α-olefin using palladium (Pd)(II)-diimine catalysts, in which isomerization and living polymerization of α-olefins are both observed. With a classical mechanistic understanding of these complexes, this behavior is often dismissed and interpreted as experimental error. Herein, we present a comprehensive mechanistic investigation into this phenomenon that supports the existence of a novel mechanistic pathway for Pd(II)-diimine complexes. Part one of the mechanistic study lays the foundation of the proposed mechanism, in which neutral Pd(II)-diimine complexes were found to exhibit a moderate to good catalytic activity for olefin isomerization of α-olefins despite the established notion that catalyst activation is required. Extensive experimental and computational studies reveal the possibility of a partial dissociation of the diimine ligand, which frees up one coordination site and enables coordination-insertion. This finding is significant as the coexistence of two reactive coordination sites at the palladium center becomes a valid proposal for the activated cationic Pd(II)-diimine complexes. In part two, we examined and validated the simultaneously observed α-olefin isomerization and living polymerization using the cationic Pd(II)-diimine catalyst, which supports the presence of two independent reaction pathways of isomerization and polymerization, respectively. Moreover, the addition of a strong Lewis acid, such as AlCl3, accelerates the ligand dissociation and the consequential isomerization as it weakens the palladium-nitrogen bond through competitive binding. In part three, Lewis acid-triggered olefin isomerization-polymerization is employed to prepare living olefinic block copolymers and further synthesize novel polyolefin-polar block copolymers with unique architectures, distinct levels of branching, crystallinity, and polar functionality in a one-pot manner.

Linear Block Copolymer Synthesis.

Block copolymers form the basis of the most ubiquitous materials such as thermoplastic elastomers, bridge interphases in polymer blends, and are fundamental for the development of high-performance materials. The driving force to further advance these materials is the accessibility of block copolymers, which have a wide variety in composition, functional group content, and precision of their structure. To advance and broaden the application of block copolymers will depend on the nature of combined segmented blocks, guided through the combination of polymerization techniques to reach a high versatility in block copolymer architecture and function. This review provides the most comprehensive overview of techniques to prepare linear block copolymers and is intended to serve as a guideline on how polymerization techniques can work together to result in desired block combinations. As the review will give an account of the relevant procedures and access areas, the sections will include orthogonal approaches or sequentially combined polymerization techniques, which increases the synthetic options for these materials.

One-For-All Polyolefin Functionalization: Active Ester as Gateway to Combine Insertion Polymerization with ROP, NMP, and RAFT.

This work develops the Polyolefin Active-Ester Exchange (PACE) process to afford well-defined polyolefin-polyvinyl block copolymers. α-Diimine PdII -catalyzed olefin polymerizations were investigated through in-depth kinetic studies in comparison to an analog to establish the critical design that facilitates catalyst activation. Simple transformations lead to a diversity of functional groups forming polyolefin macroinitiators or macro-mediators for various subsequent controlled polymerization techniques. Preparation of block copolymers with different architectures, molecular weights, and compositions was demonstrated with ring-opening polymerization (ROP), nitroxide-mediated polymerization (NMP), and photoiniferter reversible addition-fragmentation chain transfer (PI-RAFT). The significant difference in the properties of polyolefin-polyacrylamide block copolymers was harnessed to carry out polymerization-induced self-assembly (PISA) and study the nanostructure behaviors.

Tandem Living Insertion and Controlled Radical Polymerization for Polyolefin-Polyvinyl Block Copolymers.

Practical synthesis of polyolefin-polyvinyl block copolymers remains a challenge for transition-metal catalyzed polymerizations. Common approaches functionalize polyolefins for post-radical polymerization via insertion methods, yet sacrifice the livingness of the olefin polymerization. This work identifies an orthogonal radical/spin coupling technique which affords tandem living insertion and controlled radical polymerization. The broad tolerance of this coupling technique has been demonstrated for diverse radical/spin traps such as 2,2,5-trimethyl-4-phenyl-3-azahexane-3-nitroxide (TIPNO), 1-oxyl-(2,2,6,6-tetramethylpiperidine) -4-yl-α-bromoisobutyrate (TEMPO-Br), and N-tert-butyl-α-phenylnitrone (PBN). Subsequent controlled radical polymerization is demonstrated with nitroxide-mediated polymerization (NMP) and atom transfer radical polymerization (ATRP), yielding polyolefin-polyvinyl di- and triblock copolymers (D<1.3) with acrylic, vinylic and styrenic segments. These findings highlight radical trapping as an approach to expand the scope of polyolefin-functionalization techniques to access polyolefin macroinitiators.

Distorted Sandwich α-Diimine PdII Catalyst: Linear Polyethylene and Synthesis of Ethylene/Acrylate Elastomers.

The introduction of m-xylyl substituents to α-diimine PdII catalyst promotes living ethylene polymerization at room temperature and low pressure to yield high molecular weight polyethylene (PE) with low branching (<17/1000 C). m-Xylyl groups provide a highly effective blockage to the axial sites of the catalytic center and form a distorted sandwich geometry. The shielding prevents chain-transfer and easy accessibility of polar monomers, leading to a living polymerization. Conducting a light irradiation as part of the one-step metal-organic insertion light initiated radical (MILRad) process leads to diblock copolymers of ethylene and acrylates. Incorporation of different acrylate block sequences can significantly modify the mechanical and chemical properties of block copolymers which can be modulated to be a hard plastic, elastomer, or semi-amorphous polymer.

Switching the Reactivity of Palladium Diimines with "Ancillary" Ligand to Select between Olefin Polymerization, Branching Regulation, or Olefin Isomerization.

Coordinating solvents are commonly employed as ancillary ligands to stabilize late transition metal complexes and are conventionally considered to have little effect on the reaction products. Our work identifies that the presence of ancillary ligand in Pd-diimine catalyzed polymerizations of α-olefins can drastically alter reactivity. The addition of different amounts of acetonitrile allows for switching between distinct reaction modes: isomerization-polymerization with high branching (0 equiv.), regular chain-walking polymerization (1 equiv.), and alkene isomerization with no polymerization (>20 equiv.). Optimization of the isomerization reaction mode led to a general set of conditions to switch a wide variety of diimine complexes into efficient alkene isomerization catalysts, with catalyst loading as low as 0.005 mol %.

Dual Polymerization Pathway for Polyolefin-Polar Block Copolymer Synthesis via MILRad: Mechanism and Scope.

This work explores the mechanism whereby a cationic diimine Pd(II) complex combines coordination insertion and radical polymerization to form polyolefin-polar block copolymers. The initial requirement involves the insertion of a single acrylate monomer into the Pd(II)-polyolefin intermediates, which generate a stable polymeric chelate through a chain-walking mechanism. This thermodynamically stable chelate was also found to be photochemically inactive, and a unique mechanism was discovered which allows for radical polymerization. Rate-determining opening of the chelate by an ancillary ligand followed by additional chain walking allows the metal to migrate to the α-carbon of the acrylate moiety. Ultimately, the molecular parameters necessary for blue-light-triggered Pd-C bond homolysis from this α-carbon to form a carbon-centered macroradical species were established. This intermediate is understood to initiate free radical polymerization of acrylic monomers, thereby facilitating block copolymer synthesis from a single Pd(II) complex. Key intermediates were isolated and comprehensively characterized through exhaustive analytical methods which detail the mechanism while confirming the structural integrity of the polyolefin-polar blocks. Chain walking combined with blue-light irradiation functions as the mechanistic switch from coordination insertion to radical polymerization. On the basis of these discoveries, robust di- and triblock copolymer syntheses have been demonstrated with olefins (ethylene and 1-hexene) which produce amorphous or crystalline blocks and acrylics (methyl acrylate, ethyl acrylate, n-butyl acrylate, and methyl methacrylate) in broad molecular weight ranges and compositions, yielding AB diblocks and BAB triblocks.

Polyolefin Analyses with a 10 mm Multinuclear NMR Cryoprobe.

Polyolefins are important and broadly used materials. Their molecular microstructures have direct impact on macroscopic properties and dictate end-use applications. 13C NMR is a powerful analytical technique used to characterize polyolefin microstructures, such as long-chain branching (LCB), but it suffers from low sensitivity. Although the 13C sensitivity of polyolefin samples can be increased by about 5.5 times with a cryoprobe, when compared with a conventional broadband observe (BBO) probe, further sensitivity enhancement is in high demand for studying increasingly complex polyolefin microstructures. Toward this goal, distortionless enhancement by polarization transfer (DEPT) and refocused insensitive nuclei enhanced by polarization transfer (RINEPT) are explored. The use of hard, regular, and new short adiabatic 180° 13C pulses in DEPT and RINEPT is investigated. It is found that RINEPTs perform better than DEPTs and a sensitivity enhancement of 3.1 can be achieved with RINEPTs. The results of RINEPTs are further analyzed with statistics software JMP and recommendations for optimal usage of RINEPTs are suggested. An example of analyzing saturated chain ends in an ethylene-octene copolymer sample with a hard 180° 13C RINEPT pulse is demonstrated. It is shown that the experimental time can be further reduced in half because of faster proton relaxation, where the total experimental time is about 580 times shorter when compared to using a conventional method and a 10 mm BBO probe. A naturally abundant nitrogen-containing polyolefin is analyzed using 1H-15N HMBC and, to our knowledge, is the first 1H-15N HMBC presented in the field of polyolefin characterization. The relative amount of similar nitrogen-containing structures is quantified by two-dimensional integration of 1H-15N HMBC. Two pragmatic technical challenges related to using high-sensitivity NMR cryoprobes are also addressed: (1) A new 1H decoupling sequence Bi_Waltz_65_256pl is proposed to address decoupling artifacts in 13C{1H} NMR spectra which contain a strong 13C signal with a high signal-to-noise ratio (S/N). (2) A simple pulse sequence that affords zero-slope spectral baselines and quantitative results is presented to address acoustic ringing that is often associated with high-sensitivity cryoprobe use.

Enzyme assisted peptide self-assemblies trigger cell adhesion in high density oxime based host gels.

Peptide supramolecular self-assemblies are recognized as important components in responsive hydrogel based materials with applications in tissue engineering and regenerative medicine. Studying the influence of hydrogel matrices on the self-assembly behavior of peptides and interaction with cells is essential to guide the future development of engineered biomaterials. In this contribution, we present a PEG based host hydrogel material generated by oxime click chemistry that shows cellular adhesion behavior in response to enzyme assisted peptide self-assembly (EASA) within the host gel. This hydrogel prepared from poly(dimethylacrylamide-co-diacetoneacrylamide), poly(DMA-DAAM) with high molar fractions (49%) of DAAM and dialkoxyamine PEG cross-linker, was studied in the presence of embedded enzyme alkaline phosphatase (AP) and a non-adhesive cell behavior towards NIH 3T3 fibroblasts was observed. When brought into contact with a Fmoc-FFpY peptide solution (pY: phosphorylated tyrosine), the gel forms intercalated Fmoc-FFY peptide self-assemblies upon diffusion of Fmoc-FFpY into the cross-linked hydrogel network as was confirmed by circular dichroism, fluorescence emission spectroscopy and confocal microscopy. Nevertheless, the mechanical properties do not change significantly after the peptide self-assembly in the host gel. This enzyme assisted peptide self-assembly promotes fibroblast cell adhesion that can be enhanced if Fmoc-F-RGD peptides are added to the pre-gelator Fmoc-FFpY peptide solution. Cell adhesion results mainly from interactions of cells with the non-covalent peptide self-assemblies present in the gel despite the fact that the mechanical properties are very close to those of the native host gel. This result is in contrast to numerous studies which showed that the mechanical properties of a substrate are key parameters of cell adhesion. It opens up the possibility to develop a diverse set of hybrid materials to control cell fate in culture due to tailored self-assemblies of peptides responding to the environment provided by the host guest gel.

Branching Regulation in Olefin Polymerization via Lewis Acid Triggered Isomerization of Monomers.

We present a new strategy to regulate branching in chain-walking olefin polymerization by triggering a rapid isomerization of 1-alkene monomers into internal olefins by adding a Lewis acid. Polymerization of internal alkenes proceeds via chain-walking to give polymers with much higher branching than 1-alkene analogues. The utility of this approach is exemplified by synthesis of well-defined block copolymers with distinct branching characteristics per block by addition of Lewis acid midway through a reaction. We propose a novel mechanism whereby Lewis acid undergoes a counterion swap with the complex which favors isomerization as well as forming adducts with ancillary ligands, freeing coordination sites for internal alkene coordination polymerization.

Olefins and Vinyl Polar Monomers: Bridging the Gap for Next Generation Materials.

The inherent differences in reactivity between activated and non-activated alkenes prevents copolymerization using established polymer synthesis techniques. Research over the past 20 years has greatly advanced the copolymerization of polar vinyl monomers and olefins. This Review highlights the challenges associated with conventional polymerization systems and evaluates the most relevant methods which have been developed to "bridge the gap" between polar vinyl monomers and olefins. We discuss advancements in heteroatom tolerant coordination-insertion polymerizations, methods of controlling radical polymerizations to incorporate olefinic monomers, as well as combined approaches employing sequential polymerizations. Finally, we discuss state-of-the-art stimuli-responsive systems capable of facile switching between catalytic pathways and provide an outlook towards applications in which tailored copolymers are ideally suited.

Enzyme-assisted self-assembly within a hydrogel induced by peptide diffusion.

The diffusion of adequate peptide through an enzyme-embedded host hydrogel leads to the in situ start-up and growth of an interpenetrated fibrous network. Based on the enzyme-assisted self-assembly concept, both chemistry and mechanical features of the hybrid hydrogel can be tuned.

Poly(glycidol) Coating on Ultrahigh Molecular Weight Polyethylene for Reduced Biofilm Growth.

Semibranched poly(glycidol) (PG-OH) and poly(glycidol allylglycidyl ether) (PG-Allyl) coatings were formed on ultrahigh molecular weight polyethylene (UMWPE) in a unique two-step process which included radiation of UHMWPE followed by grafting of PG-OH or PG-Allyl to the surface via free radical cross-linking. Resulting surfaces were extensively characterized by FTIR-ATR, XPS, fluorescent microscopy, and contact goniometry. The performance was evaluated using the most prominent biofilm-forming bacteria Staphylococcus aureus for 24 and 48 h. The PG-Allyl coating demonstrated a 3 log reduction in biofilm growth compared to noncoated control, demonstrating a promising potential to inhibit adherence and colonization of biofilm-forming bacteria that often develop into persistent infections.

Photocontrolled Growth of Cross-Linked Nanonetworks.

We report the preparation of photoresponsive nanomaterials and the increase of their nanoscopic size through a "photogrowth" mechanism. The photogrowable nanonetworks (PGNNs) were synthesized by cross-linking two components, a thiolated acrylate copolymer and a symmetrical bismaleimide trithiocarbonate (TTC), utilizing thiol-maleimide click chemistry. With this strategy, nanonetwork growth was achieved through a photoinduced polymerization from the integrated trithiocarbonate by either direct photolysis or photoredox catalysis. Via direct photolysis, we generated a series of expanded particles by polymerizing methyl acrylate (MA) under irradiation with violet light (400 nm) over a period of 1, 3, and 6 h, starting from a 58 nm parent particle, resulting in particles of increased sizes of 77, 156, and 358 nm, respectively. Nanoparticle expansion reactions catalyzed by 10-phenylphenothiazine (PTH) were experienced to progress faster in 20 and 30 min to reach particle sizes of 195 and 300 nm. The addition of the photoredox catalyst to the expansion polymerizations with MA resulted in an increased control over the dispersity of the particles as well as of the promoted disassembly products. In this work, we demonstrated that nanoparticle structures designed as cross-linked networks with integrated trithiocarbonates can be expanded by photocontrolled radical polymerizations (photo-CRPs) in the presence or absence of a photoredox catalyst. These proof-of-concept experiments showcase the dynamic growth and integration of functional units into existing scaffolds and open up the possibility to prepare highly tailorable nanomaterials.

Nanosponge Tunability in Size and Crosslinking Density.

We describe a protocol for the synthesis of linear polyesters containing pendant epoxide functionality and their incorporation into a nanosponge with controlled dimensions. This approach begins with synthesis of a functionalized lactone which is key to the pendant functionalization of the resulting polymer. Valerolactone (VL) and allyl-valerolactone (AVL) are then copolymerized using ring-opening polymerization. Post-polymerization modification is then used to install an epoxide moiety on some or all of the pendant allyl groups. Epoxy-amine chemistry is employed to form nanoparticles in a dilute solution of both polymer and small molecule diamine crosslinker based on the desired nanosponge size and crosslinking density. Nanosponge sizes can be characterized by transmission electron microscopy (TEM) imaging to determine the dimension and distribution. This method provides a pathway by which highly tunable polyesters can create tunable nanoparticles, which can be used for small molecule drug encapsulation. Due to the nature of the backbone, these particles are hydrolytically and enzymatically degradable for a controlled release of a wide range of hydrophobic small molecules.

One-pot polyglycidol nanogels via liposome master templates for dual drug delivery.

Polyglycidol-based nanohydrogels (nHGs) have been prepared by optimizing the use of liposome master templates resulting in a high-yielding and more practical one-pot process to provide materials capable of carrying drugs of adverse chemical nature. The nanogels prepared with the one-pot method showed favorable kinetics for the release of either Nile Red (NR) or lysozyme (LYS), loaded with gel precursors such as semi-branched poly(glycidol allylglycidyl ether), PEG dithiol (1KDa), a free radical initiator and liposomal lipids at the liposome formation step. This process is superior to a comparable step-wise traditional approach and circumvents loading of the gel precursors with the hydrophilic drug into preformed liposome templates. A thiol-ene crosslinking reaction accomplishes the formation of the nanonetwork resulting in nHGs prepared in the traditional step-wise (nHG-SW) approach and the one-pot (nHG-OP) process. Both nanogel networks were characterized in terms of particle size and zeta (ζ) potential with average values of 148nm±39nm and -25.9mV±9.2 for the nHG-SW and 132nm±32 and -23.1mV±9.7 for the nHG-OPs. Loading efficiency for both of the nanogels with NR was determined by spectrophotometry to be 28% (nHP-SW) and 31% (nHP-OP). The LYS loading was based on the target loading of 10µg/mg for both nanogels found to be 84% and 86% for the nHG-SW and nHP-OP, respectively. As proof of concept for combination drug delivery, the in vitro release of both drug mimics, NR and LYS, were monitored under physiologically relevant conditions by an optimized dialysis method. The implementation of the multi-functional and semi-branched polyglycidol is recognized as the main contributor for the observed highly controlled release of proteins that are otherwise rapidly released from common PEG-based nanogel networks. Furthermore, the one-pot process led to be the most favorable drug delivery system based on the release kinetics pointing to a denser polymer network.

Matrices for combined delivery of proteins and synthetic molecules.

With the increasing advancement of synergistic, multimodal approaches to influence the treatment of infectious and non-infectious diseases, we witness the development of enabling techniques merging necessary complexity with leaner designs and effectiveness. Systems- and polypharmacology ask for multi-potent drug combinations with many targets to engage with the biological system. These demand drug delivery designs for one single drug, dual drug release systems and multiple release matrices in which the macromolecular structure allows for higher solubilization, protection and sequential or combined release profiles. As a result, nano- and micromaterials have been evolved from mono- to dual drug carriers but are also an essential part to establish multimodality in polymeric matrices. Surface dynamics of particles creating interfaces between polymer chains and hydrogels inspired the development not only of biomedical adhesives but also of injectable hydrogels in which the nanoscale material is both, adhesive and delivery tool. These complex delivery systems are segmented into two delivery subunits, a polymer matrix and nanocarrier, to allow for an even higher tolerance of the incorporated drugs without adding further synthetic demands to the nanocarrier alone. The opportunities in these quite novel approaches for the delivery of small and biological therapeutics are remarkable and selected examples for applications in cancer and bone treatments are discussed.

Precise Microscale Polymeric Networks through Piezoelectronic Inkjet Printing.

Microsized particles are versatile drug delivery systems with applications as inhalants, implants, and vaccines. An ideal fabrication technique is envisioned to provide particles with controlled size dimensions and is facile, without excessive loss of drug during incorporation, modulated morphologies and release kinetics. In this work, we report on the utilization of a set of polymeric building blocks such as allyl- functionalized polycarbonates, semibranched poly(glycidol allylglycidyl ether)s, and dithiol-PEG cross-linkers to form microsized networks in controlled size dimensions of 18-12 µm, 12-8 µm, and 1-2 µm with modulated morphologies and hydrophilicity based on the ratio of the polycarbonate or polyglycidol building blocks. Piezoelectric ink jet printing allows for the direct printing of these polymeric structures onto substrates, after which the printed droplet is cross-linked via UV light using thiol-ene click reactions. By varying the ratio of the allyl-functionalized building block droplets from being purely prepared either from polycarbonate (PC), polyglycidol (PG) backbones or in a ratio of 70/30 of functionalized polycarbonates and polyglycidols, the droplets can be either printed in DMSO or water. Preliminary studies to control the particle sizes not only through the droplet volume but also by reducing the polymer concentration by 20%, resulted in another set of 70/30 polycarbonate/polyglycidol micron sized networks with an observed corresponding size reduction of 20%. With this, we have developed a facile technique to prepare microsized hydrogel particles with homogeneous and attractive size dimensions that can be directly prepared without using lithography methodologies. The strength of the approach is the set of unique polymeric building blocks that in combination with the new technique allows for a modulation of hydrophilicity and morphologies to form promising drug delivery candidates to carry and release synthetic as well as biological cargo.

Dual drug delivery of tamoxifen and quercetin: Regulated metabolism for anticancer treatment with nanosponges.

We report the synthesis and encapsulation of polyester nanosponge particles (NPs) co-loaded with tamoxifen (TAM) and quercetin (QT) to investigate the loading, release and in vitro metabolism of a dual drug formulation. The NPs are made in two variations, 4% and 8% crosslinking densities, to evaluate the effects on metabolism and release kinetics. The NP-4% formulation with a particle size of 89.3 ± 14.8 nm was found to have loading percentages of 6.91 ± 0.13% TAM and 7.72 ± 0.15% QT after targeting 10% (w/w) each. The NP-8% formulation with a particle size of 91.5 ± 9.8 nm was found to have loading percentages of 7.26 ± 0.10% TAM and 7.80 ± 0.12% QT. The stability of the formulation was established in simulated gastrointestinal fluids, and the metabolism of TAM was shown to be reduced 2-fold and 3-fold for NP-4%s and NP-8%s, respectively, while QT metabolism was reduced 3 and 4-fold. The implications for improved bioavailability of the NP formulations were supported by cytotoxicity results that showed a similar efficacy to free dual drug formulations and even enhanced anti-cancer effects in the recovery condition. This work demonstrates the suitability of the nanosponges not only as a dual release drug delivery system but also enabling a regulated metabolism through the capacity of a nanonetwork. The variation in crosslinking enables a dual release with tailored release kinetics and suggests improved bioavailability aided by a reduced metabolism.