Computationally image-corrected dual-comb microscopy with a free-running single-cavity dual-comb fiber laser.

Dual-comb microscopy (DCM), an interesting imaging modality based on the optical-frequency-comb (OFC) mode and image pixel one-to-one correspondence, benefits from scan-less full-field imaging and simultaneous confocal amplitude and phase imaging. However, the two fully frequency-stabilized OFC sources requirement hampers DCM practicality due to the complexity and costs. Here, a bidirectional single-cavity dual-comb fiber laser (SCDCFL) is adopted as a DCM low-complexity OFC source. Although the residual timing jitter in the SCDCFL blurs the image of a static object acquired by DCM, computational image correction significantly suppresses the image blur. Nanometer-order step surface profilometry with a 14.0 nm uncertainty highlights the computationally image-corrected DCM effectiveness. We further discuss a possibility to expand the computational image correction to a dynamic object and demonstrate its preliminary experiment. The proposed method enhances the DCM generality and practicality due to low-complexity OFC source.

Adsorption of colour from dye wastewater effluent of a down-flow hanging sponge reactor on purified coconut fibre.

This study was carried out to evaluate the potential application of agricultural waste coconut (Cocos nucifera) fibre in its purified form for decolorization of dye-containing effluent from a down-flow hanging sponge (DHS) reactor. Batch adsorption experiments were conducted by varying adsorbent dose, solution pH, contact time and temperature. The results showed that the adsorption percentage of colour increased with increasing in adsorbent dosage from 0.1 g to 1.3 g, solution pH from 2 to 10 and contact time from 1 h to 72 h. The adsorption process was sensitive to temperature and the adsorption percentage of colour reached the highest value at 30°C but decreased when temperature increased from 30°C to 60°C. Purified coconut fibre (PCF) had a good adsorption capacity under the optimal conditions of an adsorbent dose of 0.7 g, pH 8, temperature of 30°C and 24 h contact time. The equilibrium data were well fitted to both Langmuir and Freundlich isotherms, and the best fit of equilibrium isotherms was described using the Freundlich isotherm model. The Langmuir maximum adsorption capability of the PCF was found to be 303 (Pt/Co)/g at 30°C. The results of this study indicated the applicability of PCF as post-treatment unit of DHS reactor for removal of colour in the industrial dye effluent.

All-polarization-maintaining, polarization-multiplexed, dual-comb fiber laser with a nonlinear amplifying loop mirror.

We developed an all-polarization-maintaining, polarization-multiplexed, dual-comb fiber laser with a nonlinear amplifying loop mirror (NALM) mode-locking mechanism. Owing to the use of the slow and fast axes of a polarization-maintaining fiber (PMF), the dual-frequency combs with slightly different repetition rates from the single-laser cavity are generated at the same center wavelength without extra-cavity nonlinear spectral broadening. The narrow relative beat note between the two frequency combs is obtained with a full-width-at-half-maximum of ~1 kHz in the optical frequency domain. The two frequency combs have high relative stability and mutual coherence owing to passive common-mode noise cancellation.

High-coherence ultra-broadband bidirectional dual-comb fiber laser.

Dual-comb spectroscopy has emerged as an attractive spectroscopic tool for high-speed, high-resolution, and high-sensitivity broadband spectroscopy. It exhibits certain advantages when compared to the conventional Fourier-transform spectroscopy. However, the high cost of the conventional system, which is based on two mode-locked lasers and a complex servo system with a common single-frequency laser, limits the applicability of the dual-comb spectroscopy system. In this study, we overcame this problem with a bidirectional dual-comb fiber laser that generates two high-coherence ultra-broadband frequency combs with slightly different repetition rates (frep). The two direct outputs from the single-laser cavity displayed broad spectra of > 50 nm; moreover, an excessively small difference in the repetition rate (< 1.5 Hz) was achieved with high relative stability, owing to passive common-mode noise cancellation. With this slight difference in the repetition rate, the applicable optical spectral bandwidth in dual-comb spectroscopy could attain ~479 THz (~3,888 nm). In addition, we successfully generated high-coherence ultra-broadband frequency combs via nonlinear spectral broadening and detected high signal-to-noise-ratio carrier-envelope offset frequency (fCEO) beat signals using the self-referencing technique. We also demonstrated the high relative stability between the two fCEO beat signals and tunability. To our knowledge, this is the first demonstration of fCEO detection and frequency measurement using a self-referencing technique for a dual-comb fiber laser. The developed high-coherence ultra-broadband dual-comb fiber laser with capability of fCEO detection is likely to be a highly effective tool in practical, high-sensitivity, ultra-broadband applications.