RESUMO
This paper proposes a method of passive electrical decoupling which aimed at found application in reducing the crosstalk phenomenon in multi-element ultrasonic transducers. A homogeneous piezoelectric plate, covered on one side by a 1D periodic arrangement of thin metallic electrodes and on the other side by a full electrode, is considered. Finite element analysis and experimental measurements are performed to obtain the dispersion curves and normal displacements at the surface of the structure. It is shown that applying inductive shunts at the electrodes, band gaps can be created in the first Brillouin zone, which can prevent from the establishment of the first thickness mode in the plate. In that way the mechanical inter-element coupling can be lowered. Thus, the acoustic radiation in water from one sector excited at the resonance frequency is found to be closer to that of a piston mode. The transposition of this principle to the situation of a transducer including a rear medium and a front matching layer confirms the possibility of reducing the inter-element coupling. However, the physical effects at the origin of this reduction are different from those inherent to the cutting of a piezocomposite ceramic as it is done in most probes available in the market. As a result, we show that taking advantage of the electrical boundary conditions upon the passive elements in a transducer gives real opportunities for crosstalk reduction that may be implemented in ultrasonic systems for imaging in the medical field and in NDT.
RESUMO
Quadratic nonlinear equations of a piezoelectric element under the assumptions of 1D vibration and weak nonlinearity are derived by the perturbation theory. It is shown that the nonlinear response can be represented by controlled sources that are added to the classical hexapole used to model piezoelectric ultrasonic transducers. As a consequence, equivalent electrical circuits can be used to predict the nonlinear response of a transducer taking into account the acoustic loads on the rear and front faces. A generalisation of nonlinear equivalent electrical circuits to cases including passive layers and propagation media is then proposed. Experimental results, in terms of second harmonic generation, on a coupled resonator are compared to theoretical calculations from the proposed model.
RESUMO
Solidly mounted integrated transducers with a Bragg cell inserted between the piezoelectric film and the substrate are investigated for high frequency ultrasonic applications. A numerically stable recursive one dimensional transmission/reflection model was used to analyze the behavior of the periodic structure. This theoretical analysis includes the study of the influence of the acoustic properties of the constitutive layer, the effect of the number of cells and their arrangement. A 35 MHz integrated transducer consisting in a PZT ceramic laid down on a Au/PZT Bragg cell deposited on a porous substrate was fabricated and characterized. Both theoretical and experimental results highlight the interest of using a periodic structure for high frequency ultrasonic applications.
Assuntos
Desenho Assistido por Computador , Modelos Teóricos , Sonicação , Transdutores , Ultrassonografia/instrumentação , Simulação por Computador , Desenho de Equipamento , Análise de Falha de EquipamentoRESUMO
In this work, a new method to measure in contact the nonlinearity parameter beta of solid plates is presented. A high frequency (HF) tone-burst signal of 20 MHz is inserted in the material by a contact-transducer (with a suitable coupling). A low frequency (LF) pulse (2.5 MHz) is applied to the other face, in the opposite direction, so that the nonlinear interaction of the two waves takes place during the back propagation toward the HF transducer. This collinear interaction creates a phase modulation of the HF tone-burst which is proportional to the beta coefficient and the particle velocity of the LF wave. To determine this particle velocity, in time domain, an extended self-reciprocity calibration of the contact LF transducer is used. A numeric phase demodulation is then performed, giving the beta coefficient of the sample. The proposed method is validated by nonlinearity parameter measurements in Fused Silica. The nonlinear parameter of Fused Silica measured is found to be in good agreement with the literature, and specially the negative sign of this parameter.
RESUMO
Acoustic backscattering from elastic cylindrical shells of finite lengths, immersed in water, is investigated. These objects, characterized by the ratio of length over diameter (L/2a = 9.76, 4.88, 2.44, a: outer radius), are excited by an obliquely incident plane acoustic wave. In the three cases studied here, the radii ratio b/a (b: inner radius) is fixed at 0.97. The investigated dimensionless frequency range extends over 10 k1a < or = 50 (k1 : wave number in water). The first guided wave, T0, is of particular interest here. The influence of the shell's length on the backscattered pressure is experimentally observed in the time-angle and frequency-angle representations. In support of this experimental study, a time-domain representation is used by extending a theoretical model that provides a geometrical description of the helical propagation of the surface waves around the shell [Bao, J. Acoust. Soc. Am. 94, 1461-1466 (1993)]. Theoretical results on cylindrical shells considered as infinitely long, with identical characteristics, are compared with both experimental representations.
RESUMO
Through an experimental approach, in this paper we investigate the acoustic wave scattering processes involved in the acoustic backscattering at variable incidences from an air-filled submerged cylindrical shell with hemispherical endcaps. Given the 1% shell thickness and the explored low frequency domain, the wave types studied are the circumferential or helical S0 wave and the helical T0 wave only. Between the axial (in the direction of the main axis of the object) and the normal incidences (normal to the main axis), two distinct angular zones can be observed depending on hemispherical or cylindrical excitation. In these zones, after a pressure wave excitation, different series of echoes on the echo wave forms are identified by their arrival times and related wave types. From results in the time domain and those obtained in the frequency domain, each acoustic response from the target corresponding to the two zones of excitation is compared with the acoustic response of canonical objects (spherical shell for axial excitation and tube for normal excitation). This analysis of the acoustic response from the target at various incidences, highlights the influence of both the endcaps and the finite length for a cylindrical shell on scattering. The study is intended to make a contribution to the knowledge of the identification of such geometrically complex objects.