Exciton diffusion in poly(3-hexylthiophene) by first-principles molecular dynamics.

Poly(3-hexylthiophene) (P3HT) is a polymer used in organic solar cells as a light absorber and an electron donor. Photogenerated excitons diffuse and dissociate into free charge carriers provided they reach the absorber boundaries. The device efficiency is therefore dependent on the exciton diffusion. Although measurements can be performed for example by time-resolved photoluminescence, a quantitative modeling is highly desirable to get an insight into the relationship between the atomic structure at finite temperature and the diffusion coefficient of the exciton. This is the objective of the present work, achieved by resorting to first-principles molecular dynamics in combination with the restricted open-shell approach to model the singlet excited state. The maximally localized Wannier functions and their centers are used to monitor and localize the electron and the hole along the dynamics. The resulting diffusion coefficient is in close agreement with available measurements.

Self-Powered Dynamic Glazing Based on Nematic Liquid Crystals and Organic Photovoltaic Layers for Smart Window Applications.

Dynamic windows allow monitoring of in-door solar radiation and thus improve user comfort and energy efficiency in buildings and vehicles. Existing technologies are, however, hampered by limitations in switching speed, energy efficiency, user control, or production costs. Here, we introduce a new concept for self-powered switchable glazing that combines a nematic liquid crystal, as an electro-optic active layer, with an organic photovoltaic material. The latter aligns the liquid crystal molecules and generates, under illumination, an electric field that changes the molecular orientation and thereby the device transmittance in the visible and near-infrared region. Small-area devices can be switched from clear to dark in hundreds of milliseconds without an external power supply. The drop in transmittance can be adjusted using a variable resistor and is shown to be reversible and stable for more than 5 h. First solution-processed large-area (15 cm2) devices are presented, and prospects for smart window applications are discussed.

Hydrogen Bonding as a Supramolecular Tool for Robust OFET Devices.

In the present study, we demonstrated the effect of hydrogen bonding in the semiconducting behaviour of a small molecule used in organic field-effect transistors (OFETs). For this study, the highly soluble dumbbell-shaped molecule, Boc-TATDPP based on a Boc-protected thiophene-diketopyrrolopyrrole (DPP) and triazatruxene (TAT) moieties was used. The two Boc groups of the molecule were removed by annealing at 200 °C, which created a strong hydrogen-bonded network of NH-TATDPP supported by additional π-π stacking. These were characterised by thermogravimetric analysis (TGA), UV/Vis and IR spectroscopy, XRD and high-resolution (HR)-TEM measurements. FETs were fabricated with the semiconducting channel made of Boc-TATDPP and NH-TATDPP separately. It is worth mentioning that the Boc-TATDPP film can be cast from solution and then annealed to get the other systems with NH-TATDPP. More importantly, NH-TATDPP showed significantly higher hole mobilities compared to Boc-TATDPP. Interestingly, the high hole mobility in the case of NH-TATDPP was unaffected upon blending with [6,6]-phenyl-C71-butyric acid methyl ester (PC71 BM). Thus, this robust hydrogen-bonded supramolecular network is likely to be useful in designing efficient and stable organic optoelectronic devices.

An Electron-Transporting Thiazole-Based Polymer Synthesized Through Direct (Hetero)Arylation Polymerization.

In this work, a new n-type polymer based on a thiazole-diketopyrrolopyrrole unit has been synthesized through direct (hetero)arylation polycondensation. The molar mass has been optimized by systematic variation of the the monomer concentration. Optical and electrochemical properties have been studied. They clearly suggested that this polymer possess a high electron affinity together with a very interesting absorption band, making it a good non-fullerene acceptor candidate. As a consequence, its charge transport and photovoltaic properties in a blend with the usual P3HT electron-donating polymer have been investigated.

Wide area mapping of liquid crystal devices with passive and active command layers.

We track the non-uniformity of a wide area liquid crystal device using multiple cross-polarized intensity measurements. They give us not only accurate estimates of the core physical liquid crystal parameters, such as elastic constants, but also spatial maps of the device properties, including the liquid crystal thickness and pretilt angle. A bootstrapping statistical analysis, coupled with the multiple measurements, gives us reliable error bars on all the measured parameters.

Rational Engineering of BODIPY-Bridged Trisindole Derivatives for Solar Cell Applications.

Boron dipyrromethene (BODIPY) and its derivatives are known to be efficient photon-harvesting chromophores. However, their study as active materials in bulk heterojunction (BHJ) solar cells is still scarce. In this study, the development of new synthetic ways to design original BODIPY-based dumbbell-shape molecules, including a first 2,3,5,6-tetravinyl aromatic BODIPY molecule, is reported. High fill factors can be obtained in BHJ solar cells when blended with a fullerene derivative, leading to a new record BODIPY-based power conversion efficiency of 5.8 %.

Effect of Aging and PCBM Content on Bulk Heterojunction Organic Solar Cells Studied by Intensity Modulated Photocurrent Spectroscopy.

A series of encapsulated and nonencapsulated bulk heterojunction photovoltaic devices containing poly(3-hexylthiophene) (P3HT) and [6,6]-phenyl C61 butyric acid methyl ester (PCBM) with different P3HT:PCBM ratios were investigated using traditional steady-state as well as non-steady-state intensity modulated photocurrent spectroscopy (IMPS) techniques. The steady state J-V measurements showed that PCBM content did not have a significant effect on the efficiency for freshly prepared devices, whereas aged nonencapsulated devices exhibited a strong dependence on PCBM content. IMPS measurements showed a significant contribution of interfacial nongeminate recombination in nonencapsulated devices, which increased with decreasing PCBM content in the photoactive layer and cell aging. It was related to the formation of interfacial states at the P3HT/PCBM interface due to atmospheric contamination, which act as recombination centers. Device encapsulation was found to be effective in preventing the occurrence of interfacial recombination. Our results suggest that IMPS can be used as a diagnostic tool to predict the performance of bulk heterojunction organic solar cells. If a solar cell shows the presence of interfacial states as indicated by semicircle arcs in quadrant I of the IMPS complex plane plots, it is most likely that its performance will deteriorate with time due to enhanced interfacial recombination, even without further exposure to atmospheric contaminations. We conclude that interfacial nongeminate recombination is an important degradation mechanism in organic solar cells, especially in the case of exposure to atmospheric contaminants.

Impact of Backbone Fluorination on π-Conjugated Polymers in Organic Photovoltaic Devices: A Review.

Solution-processed bulk heterojunction solar cells have experienced a remarkable acceleration in performances in the last two decades, reaching power conversion efficiencies above 10%. This impressive progress is the outcome of a simultaneous development of more advanced device architectures and of optimized semiconducting polymers. Several chemical approaches have been developed to fine-tune the optoelectronics and structural polymer parameters required to reach high efficiencies. Fluorination of the conjugated polymer backbone has appeared recently to be an especially promising approach for the development of efficient semiconducting polymers. As a matter of fact, most currently best-performing semiconducting polymers are using fluorine atoms in their conjugated backbone. In this review, we attempt to give an up-to-date overview of the latest results achieved on fluorinated polymers for solar cells and to highlight general polymer properties' evolution trends related to the fluorination of their conjugated backbone.

Anisotropic charge transport in large single crystals of π-conjugated organic molecules.

The electronic properties of organic semiconductors depend strongly on the nature of the molecules, their conjugation and conformation, their mutual distance and the orientation between adjacent molecules. Variations of intramolecular distances and conformation disturb the conjugation and perturb the delocalization of charges. As a result, the mobility considerably decreases compared to that of a covalently well-organized crystal. Here, we present electrical characterization of large single crystals made of the regioregular octamer of 3-hexyl-thiophene (3HT)8 using a conductive-atomic force microscope (C-AFM) in air. We find a large anisotropy in the conduction with charge mobility values depending on the crystallographic orientation of the single crystal. The smaller conduction is in the direction of π-π stacking (along the long axis of the single crystal) with a mobility value in the order of 10(-3) cm(2) V(-1) s(-1), and the larger one is along the molecular axis (in the direction normal to the single crystal surface) with a mobility value in the order of 0.5 cm(2) V(-1) s(-1). The measured current-voltage (I-V) curves showed that along the molecular axis, the current followed an exponential dependence corresponding to an injection mode. In the π-π stacking direction, the current exhibits a space charge limited current (SCLC) behavior, which allows us to estimate the charge carrier mobility.

Thiazole as a weak electron-donor unit to lower the frontier orbital energy levels of donor-acceptor alternating conjugated materials.

We demonstrate that the substitution of the thiophene by the thiazole heterocyclic compound as a weak electron-donor unit, in donor-acceptor alternating conjugated materials, allows a simultaneous downshift of both HOMO and LUMO levels while keeping the energy bandgap almost unchanged.

High-performance solution-processed solar cells and ambipolar behavior in organic field-effect transistors with thienyl-BODIPY scaffoldings.

Green-absorbing dipyrromethene dyes engineered from bis-vinyl-thienyl modules are planar molecules, exhibiting strong absorption in the 713-724 nm range and displaying comparable electron and hole mobilities in thin films (maximum value 1 × 10(-3) cm(2)/(V·s)). Bulk heterojunction solar cells assembled with these dyes and a fullerene derivative (PC(61)BM) at a low ratio give a power conversion efficiency as high as 4.7%, with short-circuit current values of 14.2 mA/cm(2), open-circuit voltage of 0.7 V, and a broad external quantum efficiency ranging from 350 to 920 nm with a maximum value of 60%.

Absorption tuning of monosubstituted triazatruxenes for bulk heterojunction solar cells.

A series of triazatruxene (TAT)-functionalized Bodipy dyes were prepared by a sequence of reactions involving either cross-coupling reactions promoted by Pd complexes or a Knoevenagel reaction leading to a vinyl linker. The new dyes show large absorption coefficients and fluorescence quantum yields as well as interesting electrochemical properties. The blue dyes of this series exhibit interesting photovoltaic effects (V(OC) = 0.83 V, J(SC) = 3.6 mA/cm(2), efficiency 0.9%) in bulk heterojunction solar cells, due to the good hole mobility imported by the TAT entity.

Electronic Properties and Photovoltaic Performances of a Series of Oligothiophene Copolymers Incorporating Both Thieno[3,2-b]thiophene and 2,1,3-Benzothiadiazole Moieties.

A series of donor-acceptor alternated conjugated copolymers, composed of thiophene, bithiophene, thieno[3,2-b]thiophene, and 2,1,3-benzothiadiazole units and differing from each other by the nature and the number of 3-alkylthiophene in the backbone, have been synthesized by Stille cross-coupling polymerization. The material's optical and electrochemical properties, in solution and in thin films, have been investigated using UV-Visible absorption and cyclic voltammetry. Bulk heterojunction solar cells using blends of the newly synthesized copolymers, as electron donor, and C60-PCBM or C70-PCBM, as electron transporting material, have been elaborated. A maximum power conversion efficiency of 1.8% is achieved with a 1:4 PPBzT(2) -C12:C70-PCBM weight ratio.