Local gate control of Mott metal-insulator transition in a 2D metal-organic framework.

Electron-electron interactions in materials lead to exotic many-body quantum phenomena, including Mott metal-insulator transitions (MITs), magnetism, quantum spin liquids, and superconductivity. These phases depend on electronic band occupation and can be controlled via the chemical potential. Flat bands in two-dimensional (2D) and layered materials with a kagome lattice enhance electronic correlations. Although theoretically predicted, correlated-electron Mott insulating phases in monolayer 2D metal-organic frameworks (MOFs) with a kagome structure have not yet been realised experimentally. Here, we synthesise a 2D kagome MOF on a 2D insulator. Scanning tunnelling microscopy (STM) and spectroscopy reveal a MOF electronic energy gap of ∼200 meV, consistent with dynamical mean-field theory predictions of a Mott insulator. Combining template-induced (via work function variations of the substrate) and STM probe-induced gating, we locally tune the electron population of the MOF kagome bands and induce Mott MITs. These findings enable technologies based on electrostatic control of many-body quantum phases in 2D MOFs.

Cerebrovascular Responses in a Patient with Lundberg B Waves Following Subarachnoid Haemorrhage Assessed with a Novel Non-Invasive Brain Pulse Monitor: A Case Report.

Subarachnoid haemorrhage (SAH) can trigger a range of poorly understood cerebrovascular responses that may play a role in delayed cerebral ischemia. The brain pulse monitor is a novel non-invasive device that detects a brain photoplethysmography signal that provides information on intracranial pressure (ICP), compliance, blood flow and tissue oxygen saturation. We monitored the cerebrovascular responses in a patient with Lundberg B waves following a SAH. The patient presented with a Fischer grade 4 SAH that required urgent left posterior communicating artery aneurysm coiling and ventricular drain insertion. On hospital day 4 oscillations or spikes on the invasive ICP were noted, consistent with Lundberg B waves. Brain pulse monitoring demonstrated concurrent pulse waveform features consistent with reduced brain compliance and raised ICP over both brain hemispheres. Oxygen levels also demonstrated slow oscillations correlated with the ICP spikes. Brief infrequent episodes of reduced and absent brain pulses were also noted over the right hemisphere. Our findings suggest that the brain pulse monitor holds promise for early detection of delayed cerebral ischemia and could offer insights into the vascular mechanisms at play.

Mesoscopic 2D molecular self-assembly on an insulator.

Two-dimensional (2D) nanostructures and nanomaterials offer potential for a wide range of technological applications in electronics, optoelectronics, data storage, sensing and catalysis. On-surface molecular self-assembly-where organic molecules act as building blocks and where surfaces play the role of supporting templates-allows for the bottom-up synthesis of such 2D systems with tuneable atomically precise morphologies and tailored electronic properties. These self-assembly protocols are well established on metal surfaces, but remain limited on electronically gapped substrates (insulators, semiconductors). The latter are useful for preventing electronic coupling (that is, hybridization between molecular assembly and underlying surface) and for avoiding quenching of optical processes, necessary for prospective electronic and optoelectronic applications. In particular, molecular self-assembly on surfaces other than weakly interacting metals can be challenging due to substrate reactivity, defects and inhomogeneities, resulting in intricate energy landscapes that limit the growth kinetically and hampers the synthesis of large-area defect-free 2D systems. Here, we demonstrate the self-assembly of a 2D, atomically thin organic molecular film on a model wide bandgap 2D insulator, single-layer hexagonal boron nitride (hBN) on Cu(111). The molecular film consists of flat, aromatic 9,10-di-cyano-anthracene (DCA) molecules. Our low-temperature scanning tunnelling microscopy and spectroscopy measurements revealed mesoscopic (>100 × 100 nm2), topographically homogeneous crystalline molecular domains resulting from flat molecular adsorption and noncovalent in-plane cyano-ring bonding, with electronically decoupled molecular orbitals (MOs) lying within the hBN electronic gap. These MOs exhibit an energy level spatial modulation (∼300 meV) that follows the moiré work function variation of hBN on Cu(111). These findings pave the way for large-area, atomically precise, highly crystalline 2D organic (and metal-organic) nanomaterials on electronically functional wide bandgap insulators.

Assessment of a Non-Invasive Brain Pulse Monitor to Measure Intra-Cranial Pressure Following Acute Brain Injury.

Background: Intracranial pressure (ICP) monitoring requires placing a hole in the skull through which an invasive pressure monitor is inserted into the brain. This approach has risks for the patient and is expensive. We have developed a non-invasive brain pulse monitor that uses red light to detect a photoplethysmographic (PPG) signal arising from the blood vessels on the brain's cortical surface. The brain PPG and the invasive ICP waveform share morphological features which may allow measurement of the intracranial pressure. Methods: We enrolled critically ill patients with an acute brain injury with invasive ICP monitoring to assess the new monitor. A total of 24 simultaneous invasive ICP and brain pulse monitor PPG measurements were undertaken in 12 patients over a range of ICP levels. Results: The waveform morphologies were similar for the invasive ICP and brain pulse monitor PPG approach. Both methods demonstrated a progressive increase in the amplitude of P2 relative to P1 with increasing ICP levels. An automated algorithm was developed to assess the PPG morphological features in relation to the ICP level. A correlation was demonstrated between the brain pulse waveform morphology and ICP levels, R2=0.66, P < 0.001. Conclusion: The brain pulse monitor's PPG waveform demonstrated morphological features were similar to the invasive ICP waveform over a range of ICP levels, these features may provide a method to measure ICP levels. Trial Registration: ACTRN12620000828921.

Selective Activation of Aromatic C-H Bonds Catalyzed by Single Gold Atoms at Room Temperature.

Selective activation and controlled functionalization of C-H bonds in organic molecules is one of the most desirable processes in synthetic chemistry. Despite progress in heterogeneous catalysis using metal surfaces, this goal remains challenging due to the stability of C-H bonds and their ubiquity in precursor molecules, hampering regioselectivity. Here, we examine the interaction between 9,10-dicyanoanthracene (DCA) molecules and Au adatoms on a Ag(111) surface at room temperature (RT). Characterization via low-temperature scanning tunneling microscopy, spectroscopy, and noncontact atomic force microscopy, supported by theoretical calculations, revealed the formation of organometallic DCA-Au-DCA dimers, where C atoms at the ends of the anthracene moieties are bonded covalently to single Au atoms. The formation of this organometallic compound is initiated by a regioselective cleaving of C-H bonds at RT. Hybrid quantum mechanics/molecular mechanics calculations show that this regioselective C-H bond cleaving is enabled by an intermediate metal-organic complex which significantly reduces the dissociation barrier of a specific C-H bond. Harnessing the catalytic activity of single metal atoms, this regioselective on-surface C-H activation reaction at RT offers promising routes for future synthesis of functional organic and organometallic materials.

Direct observation of narrow electronic energy band formation in 2D molecular self-assembly.

Surface-supported molecular overlayers have demonstrated versatility as platforms for fundamental research and a broad range of applications, from atomic-scale quantum phenomena to potential for electronic, optoelectronic and catalytic technologies. Here, we report a structural and electronic characterisation of self-assembled magnesium phthalocyanine (MgPc) mono and bilayers on the Ag(100) surface, via low-temperature scanning tunneling microscopy and spectroscopy, angle-resolved photoelectron spectroscopy (ARPES), density functional theory (DFT) and tight-binding (TB) modeling. These crystalline close-packed molecular overlayers consist of a square lattice with a basis composed of a single, flat-adsorbed MgPc molecule. Remarkably, ARPES measurements at room temperature on the monolayer reveal a momentum-resolved, two-dimensional (2D) electronic energy band, 1.27 eV below the Fermi level, with a width of ∼20 meV. This 2D band results from in-plane hybridization of highest occupied molecular orbitals of adjacent, weakly interacting MgPc's, consistent with our TB model and with DFT-derived nearest-neighbor hopping energies. This work opens the door to quantitative characterisation - as well as control and harnessing - of subtle electronic interactions between molecules in functional organic nanofilms.

Significance Of Nuclear Quantum Effects In Hydrogen Bonded Molecular Chains.

In hydrogen-bonded systems, nuclear quantum effects such as zero-point motion and tunneling can significantly affect their material properties through underlying physical and chemical processes. Presently, direct observation of the influence of nuclear quantum effects on the strength of hydrogen bonds with resulting structural and electronic implications remains elusive, leaving opportunities for deeper understanding to harness their fascinating properties. We studied hydrogen-bonded one-dimensional quinonediimine molecular networks which may adopt two isomeric electronic configurations via proton transfer. Herein, we demonstrate that concerted proton transfer promotes a delocalization of π-electrons along the molecular chain, which enhances the cohesive energy between molecular units, increasing the mechanical stability of the chain and giving rise to distinctive electronic in-gap states localized at the ends. These findings demonstrate the identification of a class of isomeric hydrogen-bonded molecular systems where nuclear quantum effects play a dominant role in establishing their chemical and physical properties. This identification is a step toward the control of mechanical and electronic properties of low-dimensional molecular materials via concerted proton tunneling.

Long-Range Surface-Assisted Molecule-Molecule Hybridization.

Metalated phthalocyanines (Pc's) are robust and versatile molecular complexes, whose properties can be tuned by changing their functional groups and central metal atom. The electronic structure of magnesium Pc (MgPc)-structurally and electronically similar to chlorophyll-adsorbed on the Ag(100) surface is investigated by low-temperature scanning tunneling microscopy and spectroscopy, non-contact atomic force microscopy, and density functional theory. Single, isolated MgPc's exhibit a flat, fourfold rotationally symmetric morphology, with doubly degenerate, partially populated (due to surface-to-molecule electron transfer) lowest unoccupied molecular orbitals (LUMOs). In contrast, MgPc's with neighbouring molecules in proximity undergo a lift of LUMOs degeneracy, with a near-Fermi local density of states with reduced twofold rotational symmetry, indicative of a long-range attractive intermolecular interaction. The latter is assigned to a surface-mediated two-step electronic hybridization process. First, LUMOs interact with Ag(100) conduction electrons, forming hybrid molecule-surface orbitals with enhanced spatial extension. Then, these delocalized molecule-surface states further hybridize with those of neighbouring molecules. This work highlights how the electronic structure of molecular adsorbates-including orbital degeneracies and symmetries-can be significantly altered via surface-mediated intermolecular hybridization, over extended distances (beyond 3 nm), having important implications for prospects of molecule-based solid-state technologies.

Progress in Epitaxial Thin-Film Na3 Bi as a Topological Electronic Material.

Trisodium bismuthide (Na3 Bi) is the first experimentally verified topological Dirac semimetal, and is a 3D analogue of graphene hosting relativistic Dirac fermions. Its unconventional momentum-energy relationship is interesting from a fundamental perspective, yielding exciting physical properties such as chiral charge carriers, the chiral anomaly, and weak anti-localization. It also shows promise for realizing topological electronic devices such as topological transistors. Herein, an overview of the substantial progress achieved in the last few years on Na3 Bi is presented, with a focus on technologically relevant large-area thin films synthesized via molecular beam epitaxy. Key theoretical aspects underpinning the unique electronic properties of Na3 Bi are introduced. Next, the growth process on different substrates is reviewed. Spectroscopic and microscopic features are illustrated, and an analysis of semiclassical and quantum transport phenomena in different doping regimes is provided. The emergent properties arising from confinement in two dimensions, including thickness-dependent and electric-field-driven topological phase transitions, are addressed, with an outlook toward current challenges and expected future progress.

Quantum Transport in Air-Stable Na3Bi Thin Films.

Na3Bi has attracted significant interest in both bulk form as a three-dimensional topological Dirac semimetal and ultrathin form as a wide-band gap two-dimensional topological insulator. Its extreme air sensitivity has limited experimental efforts on thin and ultrathin films grown via molecular beam epitaxy to ultrahigh vacuum environments. Here, we demonstrate air-stable Na3Bi thin films passivated with magnesium difluoride (MgF2) or silicon (Si) capping layers. Electrical measurements show that deposition of MgF2 or Si has minimal impact on the transport properties of Na3Bi while in ultrahigh vacuum. Importantly, the MgF2-passivated Na3Bi films are air-stable and remain metallic for over 100 h after exposure to air, as compared to near instantaneous degradation when they are unpassivated. Air stability enables transfer of films to a conventional high-magnetic field cryostat, enabling quantum transport measurements, which verify that the Dirac semimetal character of Na3Bi films is retained after air exposure.

Nitrous oxide as an effective AFM tip functionalization: a comparative study.

We investigate the possibility of functionalizing Au tips by N2O molecules deposited on a Au(111) surface and their further use for imaging with submolecular resolution. First, we characterize the adsorption of the N2O species on Au(111) by means of atomic force microscopy with CO-functionalized tips and density functional theory (DFT) simulations. Subsequently we devise a method of attaching a single N2O to a metal tip apex and benchmark its high-resolution imaging and spectroscopic capabilities using FePc molecules. Our results demonstrate the feasibility of high-resolution imaging. However, we find an inherent asymmetry of the N2O probe-particle adsorption on the tip apex, in contrast to a CO tip reference. These findings are consistent with DFT calculations of the N2O- and CO tip apexes.

Aromatic Azide Transformation on the Ag(111) Surface Studied by Scanning Probe Microscopy.

Chemical transformation of 9-azidophenanthrene on the Ag(111) surface was studied by nc-AFM in UHV. High-resolution imaging supported by first-principle calculations revealed the structure of the final products that originated from a common and elusive 9-phenanthryl nitrenoid intermediate chemisorbed on the Ag(111) surface. A formal nitrene insertion into the C-H bond along with its dimerisation and hydrogenation were identified as main reaction channels. Thus, the ability of aryl azides to form covalent σ- and π-bonds between their transformation products on a solid surface was demonstrated at a single-molecule level.

Electric-field-tuned topological phase transition in ultrathin Na3Bi.

The electric-field-induced quantum phase transition from topological to conventional insulator has been proposed as the basis of a topological field effect transistor1-4. In this scheme, 'on' is the ballistic flow of charge and spin along dissipationless edges of a two-dimensional quantum spin Hall insulator5-9, and 'off' is produced by applying an electric field that converts the exotic insulator to a conventional insulator with no conductive channels. Such a topological transistor is promising for low-energy logic circuits4, which would necessitate electric-field-switched materials with conventional and topological bandgaps much greater than the thermal energy at room temperature, substantially greater than proposed so far6-8. Topological Dirac semimetals are promising systems in which to look for topological field-effect switching, as they lie at the boundary between conventional and topological phases3,10-16. Here we use scanning tunnelling microscopy and spectroscopy and angle-resolved photoelectron spectroscopy to show that mono- and bilayer films of the topological Dirac semimetal3,17 Na3Bi are two-dimensional topological insulators with bulk bandgaps greater than 300 millielectronvolts owing to quantum confinement in the absence of electric field. On application of electric field by doping with potassium or by close approach of the scanning tunnelling microscope tip, the Stark effect completely closes the bandgap and re-opens it as a conventional gap of 90 millielectronvolts. The large bandgaps in both the conventional and quantum spin Hall phases, much greater than the thermal energy at room temperature (25 millielectronvolts), suggest that ultrathin Na3Bi is suitable for room-temperature topological transistor operation.

On-surface structural and electronic properties of spontaneously formed Tb2Pc3 single molecule magnets.

The single molecule magnet (SMM) bis(phthalocyaninato)terbium(iii) (TbPc2) has received significant and increasing attention as an exemplar system for realizing molecule-based spin electronics. Attaining higher nuclearity via multi-decker TbPc systems has remained an outstanding challenge, as known examples of Tb2Pc3 systems are only those containing Pc rings with substituents (e.g. alkyl, alkoxyl). Here we report on the spontaneous formation of Tb2Pc3 species from TbPc2 precursors via sublimation in ultrahigh vacuum (UHV) onto an Ag(111) surface. The presence of Tb2Pc3 molecules on the surface are inspected using scanning probe microscopy with submolecular resolution supported by density functional theory (DFT) calculations and additional chemical analysis. We observe the selective presence of a Kondo resonance (30 K) in the Tb2Pc3 species, that we attribute to differences in the orientation of the internal molecular ligands. Formation of triple-decker complexes offers new possibilities to study and control magnetic interactions not accessible with standard TbPc2 molecules.

Iron-based trinuclear metal-organic nanostructures on a surface with local charge accumulation.

Coordination chemistry relies on harnessing active metal sites within organic matrices. Polynuclear complexes-where organic ligands bind to several metal atoms-are relevant due to their electronic/magnetic properties and potential for functional reactivity pathways. However, their synthesis remains challenging; few geometries and configurations have been achieved. Here, we synthesise-via supramolecular chemistry on a noble metal surface-one-dimensional metal-organic nanostructures composed of terpyridine (tpy)-based molecules coordinated with well-defined polynuclear iron clusters. Combining low-temperature scanning probe microscopy and density functional theory, we demonstrate that the coordination motif consists of coplanar tpy's linked via a quasi-linear tri-iron node in a mixed (positive-)valence metal-metal bond configuration. This unusual linkage is stabilised by local accumulation of electrons between cations, ligand and surface. The latter, enabled by bottom-up on-surface synthesis, yields an electronic structure that hints at a chemically active polynuclear metal centre, paving the way for nanomaterials with novel catalytic/magnetic functionalities.

Observation of Effective Pseudospin Scattering in ZrSiS.

3D Dirac semimetals are an emerging class of materials that possess topological electronic states with a Dirac dispersion in their bulk. In nodal-line Dirac semimetals, the conductance and valence bands connect along a closed path in momentum space, leading to the prediction of pseudospin vortex rings and pseudospin skyrmions. Here, we use Fourier transform scanning tunneling spectroscopy (FT-STS) at 4.5 K to resolve quasiparticle interference (QPI) patterns at single defect centers on the surface of the line nodal semimetal zirconium silicon sulfide (ZrSiS). Our QPI measurements show pseudospin conservation at energies close to the line node. In addition, we determine the Fermi velocity to be ℏvF = 2.65 ± 0.10 eV Å in the Γ-M direction ∼300 meV above the Fermi energy EF and the line node to be ∼140 meV above EF. More importantly, we find that certain scatterers can introduce energy-dependent nonpreservation of pseudospin, giving rise to effective scattering between states with opposite pseudospin deep inside valence and conduction bands. Further investigations of quasiparticle interference at the atomic level will aid defect engineering at the synthesis level, needed for the development of lower-power electronics via dissipationless electronic transport in the future.

Direct Observation of 2D Electrostatics and Ohmic Contacts in Template-Grown Graphene/WS2 Heterostructures.

Large-area two-dimensional (2D) heterojunctions are promising building blocks of 2D circuits. Understanding their intriguing electrostatics is pivotal but largely hindered by the lack of direct observations. Here graphene-WS2 heterojunctions are prepared over large areas using a seedless ambient-pressure chemical vapor deposition technique. Kelvin probe force microscopy, photoluminescence spectroscopy, and scanning tunneling microscopy characterize the doping in graphene-WS2 heterojunctions as-grown on sapphire and transferred to SiO2 with and without thermal annealing. Both p-n and n-n junctions are observed, and a flat-band condition (zero Schottky barrier height) is found for lightly n-doped WS2, promising low-resistance ohmic contacts. This indicates a more favorable band alignment for graphene-WS2 than has been predicted, likely explaining the low barriers observed in transport experiments on similar heterojunctions. Electrostatic modeling demonstrates that the large depletion width of the graphene-WS2 junction reflects the electrostatics of the one-dimensional junction between two-dimensional materials.

Spatial charge inhomogeneity and defect states in topological Dirac semimetal thin films of Na3Bi.

Topological Dirac semimetals (TDSs) are three-dimensional analogs of graphene, with carriers behaving like massless Dirac fermions in three dimensions. In graphene, substrate disorder drives fluctuations in Fermi energy, necessitating construction of heterostructures of graphene and hexagonal boron nitride (h-BN) to minimize the fluctuations. Three-dimensional TDSs obviate the substrate and should show reduced EF fluctuations due to better metallic screening and higher dielectric constants. We map the potential fluctuations in TDS Na3Bi using a scanning tunneling microscope. The rms potential fluctuations are significantly smaller than the thermal energy room temperature (ΔEF,rms = 4 to 6 meV = 40 to 70 K) and comparable to the highest-quality graphene on h-BN. Surface Na vacancies produce a novel resonance close to the Dirac point with surprisingly large spatial extent and provide a unique way to tune the surface density of states in a TDS thin-film material. Sparse defect clusters show bound states whose occupation may be changed by applying a bias to the scanning tunneling microscope tip, offering an opportunity to study a quantum dot connected to a TDS reservoir.

Molecular Doping the Topological Dirac Semimetal Na3Bi across the Charge Neutrality Point with F4-TCNQ.

We perform low-temperature transport and high-resolution photoelectron spectroscopy on 20 nm thin film topological Dirac semimetal Na3Bi grown by molecular beam epitaxy. We demonstrate efficient electron depletion ∼10(13) cm(-2) of Na3Bi via vacuum deposition of molecular F4-TCNQ without degrading the sample mobility. For samples with low as-grown n-type doping (1 × 10(12) cm(-2)), F4-TCNQ doping can achieve charge neutrality and even a net p-type doping. Photoelectron spectroscopy and density functional theory are utilized to investigate the behavior of F4-TCNQ on the Na3Bi surface.

Electronic Properties of High-Quality Epitaxial Topological Dirac Semimetal Thin Films.

Topological Dirac semimetals (TDS) are three-dimensional analogues of graphene, with linear electronic dispersions in three dimensions. Nanoscale confinement of TDSs in thin films is a necessary step toward observing the conventional-to-topological quantum phase transition (QPT) with increasing film thickness, gated devices for electric-field control of topological states, and devices with surface-state-dominated transport phenomena. Thin films can also be interfaced with superconductors (realizing a host for Majorana Fermions) or ferromagnets (realizing Weyl Fermions or T-broken topological states). Here we report structural and electrical characterization of large-area epitaxial thin films of TDS Na3Bi on single crystal Al2O3[0001] substrates. Charge carrier mobilities exceeding 6,000 cm(2)/(V s) and carrier densities below 1 × 10(18) cm(-3) are comparable to the best single crystal values. Perpendicular magnetoresistance at low field shows the perfect weak antilocalization behavior expected for Dirac Fermions in the absence of intervalley scattering. At higher fields up to 0.5 T anomalously large quadratic magnetoresistance is observed, indicating that some aspects of the low field magnetotransport (µB < 1) in this TDS are yet to be explained.