Mechanoresponsive luminescence triggered by phase transition of a supercooled copper(I) complex.

Under mechanical stimulation, a copper(I) complex in its supercooled liquid state transforms into a crystalline phase, showing a dramatic emission color change from red to green that is accompanied by a 20-fold increase in the photoluminescence quantum yield up to 87%. This reversible phase transition relies on the intriguing ability of this copper complex to form a supercooled metastable state.

Ionic Conductivity and Structure of Glasses Synthesized by Mechanical-Milling Methods in the x[Na2S]-(100 - x) [0.5GeS2-0.5Ga2S3] System.

Chalcogenide glasses in the Na2S-GeS2-Ga2S3 pseudoternary system were synthesized using a combination route of melt-quenching and mechanical-milling methods. First, a glass rich in germanium (90GeS2-10Ga2S3) is synthesized by melt-quenching synthesis in a silica tube sealed under vacuum. This glass is used as a precursor for the second step of mechanochemistry to explore the Na2S-GeS2-Ga2S3 pseudoternary system. By using this synthesis route, the glass-forming ability is improved as the vitreous domain is enlarged, especially for Na- and Ga-rich compositions. The as-obtained amorphous powders are characterized by Raman spectroscopy, differential scanning calorimetry, X-ray total scattering, and pair distribution function (PDF) analysis. The evolution of the Raman features observed is reproduced using density functional theory calculations. Impedance spectroscopy was performed to determine the conductivity of the new glasses. The addition of germanium sulfide to the Na2S-Ga2S3 pseudobinary system enables one to increase the conductivity by 1 order of magnitude. The highest room-temperature ionic conductivity, as measured by impedance spectroscopy, is 1.8 × 10-5 S·cm-1.

Exsolution of Co-Fe Alloy Nanoparticles on the PrBaFeCoO5+δ Layered Perovskite Monitored by Neutron Powder Diffraction and Catalytic Effect on Dry Reforming of Methane.

Reversible exsolution and dissolution of metal nanoparticles (NPs) in complex oxides have been investigated as an efficient strategy to improve the performance and durability of the catalysts for thermal and electrochemical energy conversion. Here, in situ exsolution of Co-Fe alloy NPs from the layered perovskite PrBaFeCoO5+δ (PBFC) and their dissolution back into the oxide host have been monitored for the first time by in situ neutron powder diffraction and confirmed by X-ray diffraction and electron microscopy. Catalytic tests for dry reforming of methane showed stable operation over ∼100 h at 800 °C with negligible carbon deposition (<0.3 mg/gcat h). The CO2 and CH4 conversions are among the highest achieved by layered double perovskites. The cyclability of the PBFC catalyst and the potential to improve the catalytic activity by adjusting the composition, size, and the NP distribution would pave the way for highly efficient energy conversion applications.

Mechanochemical Synthesis and Study of the Local Structure of NaGaS2 Glass and Glass-Ceramics.

NaGaS2 is a newly discovered compound that has already shown great promise for a variety of applications because of its layered structure and ion exchange properties. In this work, crystalline NaGaS2 has been synthesized by an alternative method to what has been previously published, namely, by mechanochemistry, either by a direct one-step process or by a two-step process. In the one-step process, crystalline NaGaS2 is directly formed by milling sodium sulfide Na2S and gallium(III) sulfide Ga2S3. However, an amorphous material is present in majority together with the crystalline phase. In the two-step process, amorphous NaGaS2 is first obtained by mechanical milling and then heated above its glass transition temperature to obtain a glass-ceramic mainly composed of crystalline NaGaS2. For the two-step process, changes of the local atomic-level structure in amorphous NaGaS2 and after crystallization were analyzed by high-field solid-state nuclear magnetic resonance (NMR) spectroscopy as well as by X-ray total scattering and pair distribution function (PDF) analysis. Based on quantitative analysis on the 23Na NMR spectra, modifying the annealing treatment can promote the formation of the crystalline phase up to a molar fraction of 83.8%.

Safety and Efficacy of Transarterial Chemoembolization in Elderly Patients with Intermediate Hepatocellular Carcinoma.

(1) Introduction: Transarterial chemoembolization (TACE) is the most widely used treatment for intermediate hepatocellular carcinoma (HCC), with limited data available in elderly patients. This study compares the safety and efficacy of TACE for HCC in elderly patients (≥70 years) versus younger patients (<70 years). (2) Materials and Methods: Patients treated by a first TACE for HCC at Grenoble-Alpes University Hospital from January 2012 to March 2017 were included. The primary objective was to compare the safety and predictive factors of serious adverse events between groups using univariate and multivariate analyses. Secondary objectives included tumor response and survival analyses. (3) Results: 271 patients were included: 88 elderly and 183 under 70 years. A total of 20.5% of elderly patients experienced serious adverse events versus 21.3% of patients under 70 (p = 0.87). The predictive factors of serious adverse events were Child−Pugh ≥ B7 (p < 0.0001), ECOG ≥ 1 (p = 0.0019), and MELD ≥ 9 (p = 0.0415). The serious adverse event rate was not increased with age (p = 0.87). The objective tumor response rate was 89.5% in elderly versus 78.7% in younger patients (p = 0.03). (4) Conclusion: This study showed similar safety profiles of the first TACE between elderly and younger patients, with comparable efficacy outcomes, suggesting that advanced age should not constitute a limitation in itself in treatment decision-making.

Gender Differences in Self-efficacy for Programming Narrowed After a 2-h Science Museum Workshop.

Many girls believe they have little natural ability in computer science and girls' perception of self-efficacy beliefs for programming is generally low. Offering engaging hands-on programming activities could be a beneficial strategy to increase girls' self-efficacy beliefs for programming since it has the potential to offer them exposure to mastery experiences. However, a programming workshop in a museum might not offer ideal settings to promote girls' mastery experiences in programming because of its short duration and how gender stereotypes may impact the participation in hands-on activities. In the research presented here, we explore how a science museum's introductory programming workshop focused on robotics can impact pupils' self-efficacy beliefs for programming related to mastery experiences, with a specific focus on girls. H1-Prior to the programming workshop, it is expected that girls' self-efficacy beliefs will be lower than boys'. H2-Boys generally have more positive experiences with STEM activities than girls, irrespective of experimental condition. Thus, following the workshop, we predict that girls' and boys' self-efficacy for programming will have increased, but that boy's self-efficacy beliefs will remain higher than girls'. In total, 172 pupils (94 girls) aged 10-14 years completed a Mastery Experiences in Programming questionnaire before and after taking part in a programming workshop. Our results show that after a 2-h programming workshop in a science museum, gender differences in self-efficacy for programming initially observed narrowed and even disappeared.

De nombreuses filles estiment posséder peu d'aptitudes naturelles en informatique et leur sentiment d'efficacité personnelle en ce qui a trait à la programmation demeure généralement faible. Le fait de proposer des activités de programmation captivantes et pratiques peut s'avérer une stratégie efficace pour augmenter le sentiment d'efficacité personnelle des filles quant à la programmation parce que ces activités possèdent le potentiel de leur procurer de précieuses expériences de réussite. Cependant, les ateliers de programmation organisés dans les musées n'offrent pas nécessairement les meilleures conditions pour favoriser les expériences de réussite en programmation pour les filles, en raison de leur courte durée et parce que les stéréotypes liés au genre peuvent avoir des effets sur la participation aux activités pratiques. Dans cette étude, nous explorons comment un atelier d'initiation à la programmation axée sur la robotique, offert dans un musée de sciences, peut modifier le sentiment d'efficacité personnelle des élèves à l'égard de la programmation en ce qui a trait aux expériences de réussite, et ce particulièrement chez les filles. H1­ Avant la tenue de l'atelier de programmation, il est attendu que le sentiment d'efficacité personnelle des filles sera plus faible que celui des garçons. H2­Ces derniers vivent généralement plus d'expériences positives dans les STIM que les filles, peu importe la condition expérimentale en cause. Ainsi, nous prédisons qu'après la tenue de l'atelier, le niveau d'efficacité personnelle à l'égard de la programmation des filles et des garçons aura augmenté, mais que celui des garçons demeurera plus élevé que celui des filles. Le nombre d'élèves âgés de 10 à 14 ans qui ont rempli un questionnaire portant sur les expériences de réussite en programmation avant et après la tenue de l'atelier est de 172, dont 94 sont des filles. Les résultats indiquent qu'après un atelier de programmation d'une durée de deux heures, tenu dans un musée de sciences, les différences entre les genres initialement observées quant à l'efficacité personnelle à l'égard de la programmation se sont amenuisées et ont même disparu.

Exsolution of Ni Nanoparticles from A-Site-Deficient Layered Double Perovskites for Dry Reforming of Methane and as an Anode Material for a Solid Oxide Fuel Cell.

Exsolution is a promising technique to design metal nanoparticles for electrocatalysis and renewable energy. In this work, Ni-doped perovskites, (Pr0.5Ba0.5)1-x/2Mn1-x/2Nix/2O3-δ with x = 0, 0.05, 0.1, and 0.2 (S-PBMNx), were prepared to design exsolution systems as solid oxide fuel cell anodes and for catalysis applications. X-ray diffraction and transmission electron microscopy (TEM) analyses demonstrated that correlating A-site deficiency with Ni content can effectively induce exsolution of all Ni under H2 atmosphere at T ∼ 875 °C, yielding the reduced (exsolved) R-PBMNx materials. On heating the exsolution systems in air, metal incorporation in the oxide lattice did not occur; instead, the Ni nanoparticles oxidized to NiO on the layered perovskite surface. The lowest area-specific resistance (ASR) under wet 5% H2/N2 in symmetrical cells was observed for R-PBMN0.2 anode (ASR ∼ 0.64 Ω cm2 at 850 °C) due to the highest Ni particle density in the R-PBMNx series. The best performance for dry reforming of methane (DRM) was also obtained for R-PBMN0.2, with CH4 and CO2 conversion rates at 11 and 32%, respectively, and the highest production of H2 (37%). The DRM activity of R-PBMN0.2 starts at 800 °C and is sustained for up to at least 5 h operation with little carbon deposition (0.017 g·gcat-1·h-1). These results clearly demonstrate that varying Ni-doping in layered double perovskite oxides is an effective strategy to manipulate the electrochemical performance and catalytic activity for energy conversion purposes.

In Situ Synchrotron Powder Diffraction Study of Cd Intercalation into Chevrel Phases: Crystal Structure and Kinetic Effect.

Chevrel phases are molybdenum chalcogenides of formula M xMo6X8 (where M is a cation and X is a chalcogen) that present a complex and captivating intercalation chemistry that has drawn the interest of the solid-state chemistry community since their discovery. This property has a huge potential for applied science and device development for energy storage and pollutant removal and detection, but a deeper knowledge of the intercalation processes and chemistry is still necessary. In the present work, the intercalation of Cd2+ in aqueous solution has been studied, taking advantage of the complementarity of electrochemical characterization and synchrotron powder diffraction acquired during an in situ combined experiment. During the experiment, industrially adequate electrochemical conditions (room temperature and reduced process time) were applied, allowing a better understanding of the intercalation processes. The intercalated phases obtained by electrochemistry have been characterized ex situ, and for the first time the structures of Cd2Mo6X8 (X = S, Se) have been determined. Unexpectedly, Cd2Mo6Se8 presents a trigonal crystal structure with only cavity 2 occupied, which has not been encountered before for Chevrel phases.

Hybrid Improper Ferroelectricity in (Sr,Ca)3Sn2O7 and Beyond: Universal Relationship between Ferroelectric Transition Temperature and Tolerance Factor in n = 2 Ruddlesden-Popper Phases.

Hybrid improper ferroelectricity, which utilizes nonpolar but ubiquitous rotational/tilting distortions to create polarization, offers an attractive route to the discovery of new ferroelectric and multiferroic materials because its activity derives from geometric rather than electronic origins. Design approaches blending group theory and first principles can be utilized to explore the crystal symmetries of ferroelectric ground states, but in general, they do not make accurate predictions for some important parameters of ferroelectrics, such as Curie temperature ( TC). Here, we establish a predictive and quantitative relationship between TC and the Goldschmidt tolerance factor, t, by employing n = 2 Ruddlesden-Popper (RP) A3B2O7 as a prototypical example of hybrid improper ferroelectrics. The focus is placed on an RP system, (Sr1- xCa x)3Sn2O7 ( x = 0, 0.1, and 0.2), which allows for the investigation of the purely geometric (ionic size) effect on ferroelectric transitions, due to the absence of the second-order Jahn-Teller active (d0 and 6s2) cations that often lead to ferroelectric distortions through electronic mechanisms. We observe a ferroelectric-to-paraelectric transition with TC = 410 K for Sr3Sn2O7. We also find that the TC increases linearly up to 800 K upon increasing the Ca2+ content, i.e., upon decreasing the value of t. Remarkably, this linear relationship is applicable to the suite of all known A3B2O7 hybrid improper ferroelectrics, indicating that the  TC correlates with the simple crystal chemistry descriptor, t, based on the ionic size mismatch. This study provides a predictive guideline for estimating the TC of a given material, which would complement the convergent group-theoretical and first-principles design approach.

Site Selectivity of Hydride in Early-Transition-Metal Ruddlesden-Popper Oxyhydrides.

Layered perovskite titanium oxyhydrides have been prepared by low-temperature topochemical CaH2 reduction from Ruddlesden-Popper Sr n+1Ti nO3 n+1 phases ( n = 1, 2) and structurally characterized by combined synchrotron X-ray and neutron diffraction data refinements. In the single-layered Sr2TiO3.91(2)D0.14(1) material, hydride anions are statistically disordered with oxides on the apical site only, as opposed to known transition-metal oxyhydrides exhibiting a preferred occupation of the equatorial site. This unprecedented site selectivity of H- has been reproduced by periodic DFT+ U calculations, emphasizing for the hydride defect a difference in formation energy of 0.24 eV between equatorial and apical sites. In terms of electronic structure, the model system Sr2TiO3.875H0.125 is found to be slightly metallic and the released electron remains mostly delocalized over several Ti atoms. On the other hand, hydride anions in the double-layered Sr3Ti2O6.20H0.12 material show a clear preference for the bridging apical site within the perovskite slabs, as confirmed by DFT calculations on the Sr3Ti2O6.875H0.125 model system. Finally, the influence of the B-site chemical nature on the hydride site selectivity for early 3d transition metals is theoretically explored in the single-layered system by substituting vanadium for titanium. The V3+ electronic polaron is suggested to play a role in stabilizing H- on the equatorial site in Sr2VO4- xH x for x = 0.125.

Comprehensive Study of Oxygen Storage in YbFe2O4+x (x ≤ 0.5): Unprecedented Coexistence of FeOn Polyhedra in One Single Phase.

The multiferroic LuFe2.5+2O4 was recently proposed as a promising material for oxygen storage due to its easy reversible oxidation into LuFe3+2O4.5. We have investigated the similar scenario in YbFe2O4+x, leading to a slightly greater oxygen storage (OSC) capacity of 1434 µmol O/g. For the first time, the structural model of LnFe2O4.5 was fully understood by high-resolution microscopy images, and synchrotron and neutron diffraction experiments, as well as maximum entropy method. The oxygen uptake promotes a reconstructive shearing of the [YbO2] sub-units controlled by the adaptive Ln/Fe oxygen coordination and the Fe2/3+ redox. After oxidation, the rearrangement of the Fe coordination polyhedra is unique such that all available FeOn units (n = 6, 5, 4 in octahedra, square pyramids, trigonal bipyramids, tetrahedra) were identified in modulated rows growing in plane. This complex pseudo-ordering gives rise to short-range antiferromagnetic correlation within an insulating state.

Perovskite-Type InCoO3 with Low-Spin Co3+: Effect of In-O Covalency on Structural Stabilization in Comparison with Rare-Earth Series.

Perovskite rare-earth cobaltites ACoO3 (A = Sc, Y, La-Lu) have been of enduring interest for decades due to their unusual structural and physical properties associated with the spin-state transitions of low-spin Co3+ ions. Herein, we have synthesized a non-rare-earth perovskite cobaltite, InCoO3, at 15 GPa and 1400 °C and investigated its crystal structure and magnetic ground state. Under the same high-pressure and high-temperature conditions, we also prepared a perovskite-type ScCoO3 with an improved cation stoichiometry in comparison to that in a previous study, where synthesis at 6 GPa and 1297 °C yielded a perovskite cobaltite with cation mixing on the A-site, (Sc0.95Co0.05)CoO3. The two perovskite phases have nearly stoichiometric cation compositions, crystallizing in the orthorhombic Pnma space group. In the present investigation, comprehensive studies on newly developed and well-known Pnma ACoO3 perovskites (A = In, Sc, Y, Pr-Lu) show that InCoO3 does not fulfill the general evolution of crystal metrics with A-site cation size, indicating that InCoO3 and rare-earth counterparts have different chemistry for stabilizing the Pnma structures. Detailed structural analyses combined with first-principles calculations reveal that the origin of the anomaly for InCoO3 is ascribed to the A-site cation displacements that accompany octahedral tilts; despite the highly tilted CoO6 network, the In-O covalency makes In3+ ions reluctant to move from their ideal cubic-symmetry position, leading to less orthorhombic distortion than would be expected from electrostatic/ionic size mismatch effects. Magnetic studies demonstrate that InCoO3 and ScCoO3 are diamagnetic with a low-spin state of Co3+ below 300 K, in contrast to the case of (Sc0.95Co0.05)CoO3, where the high-spin Co3+ ions on the A-site generate a large paramagnetic moment. The present work extends the accessible composition range of the low-spin orthocobaltite series and thus should help to establish a more comprehensive understanding of the structure-property relation.

Pressure-Stabilized Cubic Perovskite Oxyhydride BaScO2H.

We report a scandium oxyhydride BaScO2H prepared by solid state reaction under high pressure. Rietveld refinements against powder synchrotron X-ray and neutron diffraction data revealed that BaScO2H adopts the ideal cubic perovskite structure (Pm3̅m), where oxide (O2-) and hydride (H-) anions are disordered. 1H nuclear magnetic resonance (NMR) spectroscopy provides a positive chemical shift of about +4.4 ppm, which can be understood by the distance to the nearest (and possibly the next nearest) cation from the H nucleus. A further analysis of the NMR data and calculations based on ab initio random structure searches suggest a partial cis preference in ScO4H2 octahedra. The present oxyhydride, if compositionally or structurally tuned, may become a candidate for H- conductors.

New chemistry of transition metal oxyhydrides.

In this review we describe recent advances in transition metal oxyhydride chemistry obtained by topochemical routes, such as low temperature reduction with metal hydrides, or high-pressure solid-state reactions. Besides the crystal chemistry, magnetic and transport properties of the bulk powder and epitaxial thin film samples, the remarkable lability of the hydride anion is particularly highlighted as a new strategy to discover unprecedented mixed anion materials.

Structure and reactivity with oxygen of Pr2NiO(4+δ): an in situ synchrotron X-ray powder diffraction study.

The promising SOFC cathode material Pr2NiO(4.22) has been studied in situ under a pure oxygen atmosphere from 25 to 950 °C by high resolution synchrotron X-ray powder diffraction. At room temperature (RT) δ = 0.22(1), the average crystal structure turns out to be monoclinic. The subtle monoclinic distortion (γ = 90.066(1)° at RT), retained up to 460 °C, is interpreted in terms of specific tilt schemes of the NiO6 octahedra. It is also shown that Pr2NiO(4.22) is incommensurately structurally modulated already at room temperature, in the same manner as the homologous cobaltate La2CoO(4.14). The phase transition to the High Temperature Tetragonal (HTT) phase was completed at 480 °C without any evidence for the Low Temperature Orthorhombic (LTO) phase allowing clarifying the phase diagram of this K2NiF4-type ternary oxide. Moreover, it turns out that above 800 °C, the HTT phase transforms reversibly into two coexisting isomorphous tetragonal phases. The incommensurate modulation subsists up to 950 °C, although modified concomitantly with the two abovementioned phase transformations. In addition, the role of kinetics on the decomposition process is highlighted through thermo-gravimetric analyses.

Hydride in BaTiO2.5H0.5: A Labile Ligand in Solid State Chemistry.

In synthesizing mixed anion oxides, direct syntheses have often been employed, usually involving high temperature and occasionally high pressure. Compared with these methods, here we show how the use of a titanium perovskite oxyhydride (BaTiO2.5H0.5) as a starting material enables new multistep low temperature topochemical routes to access mixed anion compounds. Similar to labile ligands in inorganic complexes, the lability of H(-) provides the necessary reactivity for syntheses, leading to reactions and products previously difficult to obtain. For example, BaTiO2.5N0.2 can be prepared with the otherwise inert N2 gas at 400-600 °C, in marked contrast with currently available oxynitride synthetic routes. F(-)/H(-) exchange can also be accomplished at 150 °C, yielding the oxyhydride-fluoride BaTi(O, H, F)3. For BaTiO2.4D0.3F0.3, we find evidence that further anionic exchange with OD(-) yields BaTiO2.4(D(-))0.26(OD(-))0.34, which implies stable coexistence of H(+) and H(-) at ambient conditions. Such an arrangement is thermodynamically unstable and would be difficult to realize otherwise. These results show that the labile nature of hydride imparts reactivity to oxide hosts, enabling it to participate in new multistep reactions and form new materials.

Unprecedented electron-poor octahedral Ta(6) clusters in a solid-state compound: synthesis, characterisations and theoretical investigations of Cs(2)BaTa(6)Br(15)O(3).

The crystal structure of Cs2BaTa6Br15O3 has been elucidated by using synchrotron X-ray powder diffraction and absorption experiments. It is built from edge-bridged octahedral [(Ta6Bri9Oi3)Bra6]4− cluster units with a singular poor metallic electron (ME) count equal to thirteen. This leads to a paramagnetic behaviour related to one unpaired electron. The arrangement of the Ta6 clusters is similar to that of Cs2LaTa6Br15O3 exhibiting 14-MEs per [(Ta6Bri9Oi3)Bra6]5− motif. The poorer electron-count cluster presents longer metal­metal distances as foreseen according to the electronic structure of edge-bridged hexanuclear cluster. Density functional theory (DFT) calculations on molecular models were used to rationalise the structural properties of 13- and 14-ME clusters. Periodic DFT calculations demonstrate that the electronic structure of these solid-state compounds is related to those of the discrete octahedral units. Oxygen­barium interactions seem to prevent the geometry of the octahedral cluster to strongly distort, allowing stabilisation of this unprecedented electron-poor Ta6 cluster in the solid state.

DFT-assisted structure determination of α1- and α2-VOPO4: new insights into the understanding of the catalytic performances of vanadium phosphates.

Structural investigations on vanadium phosphates, which are extensively used as catalysts in industry, often resulted in important advances in the understanding of the mechanisms driving the catalytic oxidation of light hydrocarbons. Layer translations in the two lamellar vanadium phosphates α1- and α2-VOPO4 phases identified during the catalysis were investigated by the combination of first-principles calculations, synchrotron X-ray powder diffraction, single-crystal X-ray diffraction and solid-state NMR. This analysis reveals an important feature: the α1-form is the only polymorph of VOPO4 to exhibit layer translations that prevent the formation of infinite VO6 chains. A detailed investigation of this structural characteristic in vanadium phosphates reveals the correlation between the presence of infinite VO6 chains and the catalytic performances of related phases.

Reduction of Sr2MnO4 investigated by high temperature in situ neutron powder diffraction under hydrogen flow.

This experiment emphasizes the first example of two-phase sequential Rietveld refinements throughout a solid/gas chemical reaction monitored by Neutron Powder Diffraction (NPD) at high temperature. The reduction of the n = 1 Ruddlesden-Popper (RP) oxide Sr(2)MnO(4) heated under a flow of 5% H(2)-He has been investigated throughout two heating/cooling cycles involving isothermal heating at 500 and 550 °C. Oxygen loss proceeds above T ∼ 470 °C and increases with temperature and time. When the oxygen deintercalated from the "MnO(2)" equatorial layers of the structure results in the Sr(2)MnO(3.69(2)) composition, the RP phase undergoes a first order I4/mmm → P2(1)/c, tetragonal to monoclinic phase transition as observed from time-resolved in situ NPD. The phase transition proceeds at 500 °C but is incomplete; the weight ratio of the P2(1)/c phase reaches ∼41% after 130 min of isothermal heating. The fraction of the monoclinic phase increases with increasing temperature and the phase transition is complete after 80 min of isothermal heating at 550 °C. The composition of the reduced material refined to Sr(2)MnO(3.55(1)) and does not vary on extended heating at 550 °C and subsequent cooling to room temperature (RT). The symmetry of Sr(2)MnO(3.55(1)) is monoclinic at 550 °C and therefore consistent with the RT structure determined previously for the Sr(2)MnO(3.64) composition obtained from ex situ reduction. Consequently, the stresses due to phase changes on heating/cooling in reducing atmosphere may be minimized. The rate constants for the reduction of Sr(2)MnO(4.00) determined from the evolution of weight ratio of the tetragonal and monoclinic phase in the time-resolved isothermal NPD data collected on the isotherms at 500 and 550 °C are k(500) = 0.110 × 10(-2) and k(550) = 0.516 × 10(-2) min(-1) giving an activation energy of ∼163 kJ mol(-1) for the oxygen deintercalation reaction.

Structural modulation and phase transitions in La2CoO(4.14) investigated by synchrotron X-ray and neutron single-crystal diffraction.

We report a combined synchrotron X-ray and neutron diffraction study on as-grown La(2)CoO(4.14) single-crystal from 10 to 470 K. Unprecedented structural features in terms of a (3 + 2)D incommensurate modulation have been detected and characterized in the Low Temperature Orthorhombic (LTO) phase already at room temperature despite the complex twinning that was unravelled. A new intermediate phase between the LTO and High Temperature Tetragonal (HTT) phases has been observed for the first time (in the range of 413-433 K). The transformation from LTO to this so-called HTLO (High Temperature Less Orthorhombic) phase is associated to a lowering of orthorhombicity and a loss of one modulation vector, yielding a (3 + 1)D incommensurate modulation. Conversely, above 433 K the HTT phase appears as nonmodulated but exhibits a strong dynamic disorder of CoO(6) octahedra, which has been characterized in detail by reconstruction of nuclear densities via the Maximum Entropy Method (MEM).